PD#SWPL-4090
Problem:
No audio after suspend and resume.
Suspend won't save the mute value,
and after resume, it could not be restored.
Solution:
Add a mute val to save when suspend,
and after resume, restore the mute value.
Verify:
Verified by QA.
Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#OTT-1590
Problem:
bt mac write
Solution:
Accept the MAC address from uboot and create nodes
Verify:
Verifying on Public Edition P212
Change-Id: I77ff3543aff937adc07bf3a0933a350c27e9dd20
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
PD#SWPL-4087
Problem:
System Memory needs to be optimized.
Solution:
Removed reserve memory for galcore.
Verify:
local
Change-Id: I4fc1d7690b6beda1055aebe26570a05f28474813
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
PD#SWPL-3555
Problem:
{DVB-C}Hisense needs less than 3 minutes for dvb-c search.(5/5，None)
Solution:
1.use demod internal state machine to optimize time
2.remove j.83b filter setting in dvbc mode for tl1 & txlx
Verify:
verified by t962x2_x301&t962x_r311
Change-Id: Ic922e3da727179e2e35a0fc80e52ac7242c54129
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#TV-1586
Problem:
no atv format get func
Solution:
Add atv format get func
Verify:
verified by x301
Change-Id: Ia43d5a67370d2b025e1b32833a5408a5e7d251d4
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-209
Problem:
record apk exit when recording
Solution:
set right start vdin flag
Verify:
test pass on P321
Change-Id: I0130b5a898392d75d500987f8087dbe9ab778372
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#SWPL-3809
Problem:
cm parameters curve is wrong after disable/enable
Solution:
TV cm parameters from pq db, don't need set by kernel
Verify:
verify on TL1
Change-Id: I9c87c414e009d04c6a4fdf8caf8e9bb429376d56
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3779
Problem:
local contrast default parameters is too high
Solution:
local contrast default low effect parameters
Verify:
verify on TL1
Change-Id: Ib7ec9c03284a68057f8cf245a2be8ad2e81c0af3
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3563
Problem:
1.Flash a horizontal line in the bottom of the screen in
HDMI with 4K 50/60Hz signal after enable local contrast function
2.local contrast block is obvious when platform reboot
Solution:
1.Local contrast write curve with RDMA
2.lc init reset lc module
Verify:
verify on TL1
Change-Id: Ifd4218e3688d5b0728a6fcba81558467a1c3e05f
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3957
Problem:
tcon_type need extensible usage for special case
Solution:
tcon_type change to hex value
Verify:
x301
Change-Id: I26cb58ffc1cd2f525c8cf0f7c08b0d9cf66766e5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#TV-1924
Problem:
On TL1, ramdump is not enabled.
Solution:
Add ramdump support for TL1 chips in kernel.
Also add sticky register config for other chips
Verify:
tl1_x301_v1
Change-Id: I67a11d128343ff9e615377b19914a3fc77b7acef
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-2080
Problem:
need tablet mode support for tl1
Solution:
add tablet mode support for tl1
Verify:
x301
Change-Id: Ic7a6ae94255b6152236ab0d991bce9d748d670ac
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-795
Problem:
video video caton
Solution:
1. For 23.97 and 29.97fps, broken patten case, such as 2323..2233..2323
(23.97), 222..2213(2)22(29.97) will hold one sync to toggle.
For 23.97 and 29.97fps, broken patten case, such as 2323..233223...2323
(23.97), 222..223122...22(29.97), will drain frame one sync to toggle.
2. For 24 and 30fps, every 16.6s will occur pattern broken, one frame
will display less vsync. For 24, will happen 22221222, for 30, will
happen 3232223232. Here will escape one sync and also hold one sync to
ensure pattern detection not broken, which others will lead patten
broken, and nothold or drain frame, then frame frezee or lost will
happen.
3. add pts-trace debug. Follow command could help debug video av sync.
echo 0x400000 > /sys/module/amvideo/parameters/debug_flag
echo 1,1,1 > /sys/kernel/debug/video/pts_log_enable
Above command will print too many debug info, you can use follow
echo 0 > /proc/sys/kernel/printk && dmesg -c > /dev/null
dmesg > kernel.log
Verify:
verify by p212
Change-Id: Icc03faec772937c273ca74be67f5c52ae25fea39
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-2736
Problem:
suspend green screen
Solution:
disable video in early suspend
Verify:
Ampere
Change-Id: If5ad13d2964b1541791d95ffb239293ab1e4ffb6
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
PD#SWPL-2372
Problem:
phy addr (0 - 0x100000) is reserved before. once it is release for system use.
it will be polluted by video decoder (avs2 & vp9)
Solution:
init hw addr (not 0) in decoder to avoid 0 address polluted.
then release reserved 1MB memory space in dts
Verify:
U212
Change-Id: I36f6caa09267ab1180ff12cfed9b9c7befff2842
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-1738
Problem:
support frame crc32 check and dump yuv.
Solution:
support frame check and yuv dump in media_module, add interface
to get canvas width/height.
Verify:
u212
Change-Id: Ieadc95521c4a21bec5685f8c8926d3bb2f92637b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#SWPL-3890
Problem:
when starting to play video, the manu bar shakes
Solution:
stb core don't need run mode delay.
Verify:
u212
Change-Id: If8634cfd33598343cef84b93d4757f5d5c9c72e5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-3889
Problem:
when the metadata parsed by decode is error, the array will overflow
in dv module.
Solution:
dolby type just appears once in metadata. After parsing dolby type,
breaking the circulation directly.
Verify:
U212
Change-Id: I715e28c1b9a8aab2fcb4059dd132b5b98c043f31
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-3713
Problem:
The panel's backlight is not stable when
enter standby mode after do suspend with
VAD enabled platform
Solution:
bypass undefind resume in lcd resume early
Verify:
verify by t962x2-x301
Change-Id: I8f040de9bebf3ccbdd3b2da3a46540fe676958f6
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-3360
Problem:
hdcp_rx22 ocupy much of CPU resources.
Solution:
Optimize the method of hdcp_rx22 polling-rx-status function.
Verify:
Local
Change-Id: If1c54b9cc219e32f349b4f4c555fb3fbd3539491
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-3964
Problem:
ATv channel switching crash
Solution:
stop vdin, close afbc
need judge platform, there is not afbce on txlx
Verify:
verify by einstein
Change-Id: Ibcff1da47b9fdca7e1758b0d45e7d6800bfc8080
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
PD#SWPL-3702
Problem:
local dimming need analog pwm function
Solution:
add analog pwm support
Verify:
x301
Change-Id: I502bb7505947c1f3670f44d0d307f9546f1d57fd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-3921
Problem:
Too more log when cec bus error
Solution:
print the log at log level 1
Verify:
verified on tl1 android p
Change-Id: I8273e0a46470d59160f1ac8dc71494a9abb19b0f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-3552
Problem:
tx_v show different for each chip
Solution:
add new function to setup
Verify:
co-work with analog on G12B SOCKET board
Change-Id: I1f2711b9414464c7044efc3f3128cc3c3808cfc5
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-3498
Problem:
ethernet need read data from efuse
Solution:
add interface to read data
Verify:
g12a_skt
Change-Id: I7ce7ffe2f194c875155e6db8acb55eb8ac5500a0
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
PD#SWPL-3540
Problem:
rxsense is high ahead off hpd high, some device
may start hdcp, but hdcp auth always fail
Solution:
set rxsense sync with hpd
Verify:
TL1
Change-Id: I94b4c4f188587e15bac6aceb70803a3aa9082d3b
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-3868
Problem:
add ramoops support for tl1
Solution:
alloc reserved memory to save ramoops information in DTS
Verify:
test pass on tl1_skt
Change-Id: Ib5faf2ac54663f1e9eb431d2caa800daf244699e
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-3664
Problem:
tcon will crash in kernel
Solution:
1.prior meson-fb & lcd_tcon reserved-memory
2.fix tcon_clk not enable mistake when use panel ini
Verify:
x301
Change-Id: I97baec22ecabea393f9b0d712456923720fac972
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#TV-1748
Problem:
[Hisense-T962X2-P-customer-DTV]:Failed to lock frequency in dtmb system
Solution:
leave the last mode before enter current mode to release the resources
Verify:
verified by t962x2_x301
Change-Id: Ibd7e1d4c67f5a5ad2191e0031fdd0b81812c8606
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-3750
Problem:
when debug on, too more log
Solution:
delete
Verify:
verified on android p
Change-Id: Iabaaa4fa205da5453a303c98bce8b71b55c5f77b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-3791
Problem:
the compatible string with "arm,armv8-timer" is used for AARCH64, we
should use the compatible string with "arm,armv7-timer" for AARCH32
Solution:
update the compatible string for timer node
Verify:
test pass on x301
Change-Id: I17d0f84f61109e885c5584c2703e4256262b72ef
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#SWPL-2735
Problem:
codec will occupy the first 1M memory with unknown reason.
Solution:
reserve 1M memory for codec mm until the real reason is found.
Verify:
verify by einstein
Change-Id: Ic21bfa59e74d21ae8f6b4477470b9d719bebc595
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
PD#SWPL-3793
Problem:
Address 0xC0000000 is in lowmem, which should not be warned by
virt_check:d input of virt:c0000000
~~~~~~~~
CPU: 1 PID: 5141 Comm: Binder:3297_5 Tainted: G O 4.9.113 #1
Hardware name: Generic DT based system
[<c030e760>] (show_stack+0x20/0x24)
[<c06ee8a8>] (dump_stack+0x90/0xac)
[<c031c7b4>] (virt_check+0x64/0x68)
[<c049c45c>] (__check_object_size+0x184/0x1f8)
[<c07058c0>] (copy_page_to_iter+0x288/0x5b8)
[<c04425dc>] (generic_file_read_iter+0x390/0xa48)
[<c049f238>] (__vfs_read+0xec/0x13c)
[<c04a00e0>] (vfs_read+0x9c/0x164)
[<c05ce7e8>] (sdcardfs_read+0x28/0x50)
[<c049f194>] (__vfs_read+0x48/0x13c)
[<c04a00e0>] (vfs_read+0x9c/0x164)
[<c04a13ac>] (SyS_read+0x5c/0xbc)
[<c0308980>] (ret_fast_syscall+0x0/0x48)
Solution:
Not warning for 0xC0000000 if virt address is equal to it
Verify:
R311
Change-Id: I9a3f8efe89564f31f9a49ab4448323c93ddc761d
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-3719
Problem:
optimize sdio 1bit cfg fail for dts.
Solution:
move MMC_PM_KEEP_POWER setting from
amlsd_get_host_caps(). so modify dts to
set 1bit mode.
Verify:
p212
Change-Id: I268f25a9550058e7bbf3562eec53c8cd92b58b1b
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-2206
Problem:
decoding thread was blocked to wait scatter memory to be cached done. it
may take 30+ ms and lead to cts/vts fail
Solution:
not to wait scatter cached done. it save timing of system
Verify:
Verified U212
Change-Id: I75fa3e892e0b9b8023c07b62a31ebd43d3c92044
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-3776
Problem:
all sources are displayed as black screen except DTV
Solution:
Revert "camera: add dvp camera [1/1]"
Verify:
verify by x301
Change-Id: I3f094ed18de4be382798515e5c68eb5505df2373
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
