Remove functions cpcap_set_volume() and cpcap_set_mic_volume() and instead set
the gains through cpcap_audio_set_audio_state(), which is the correct way to do
so.
Signed-off-by: Iliyan Malchev <malchev@google.com>
From a driver standpoint the max8649s and 8952 variants
for the max8649 differ only in the minimum and maximum
voltages.
Change-Id: Icc90af48a6c2d99577aa479218564d2ebee71e56
Signed-off-by: James Wylder <james.wylder@motorola.com>
The following sysfs nodes will be exposed.
/sys/class/radio/mdm6600/status (query BP status)
/sys/class/radio/mdm6600/power_status (query BP power status)
/sys/class/radio/mdm6600/command (To control BP status)
Change-Id: I4ed4b6d0d9df010713732e79f3a0598e09ad5dec
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
When changing mode, also program frame length, coarse time,
and gain so it can keep the same exposure value. Without this
API change, exposure time and gain will be reset to the default
values in the mode table and the image brightness may change
suddenly.
Change-Id: I82fe8a7d838a041b27af7dd6b9b3d27030318456
Fix issue where the ID Float interrupt may occur during the 200ms
where state is set to USB_POWER, causing the state machine to get
into a bad state.
Change-Id: I99e7b5de84f4b091c5b6e4f3e522876561603b61
Signed-off-by: Greg Meiste <w30289@motorola.com>
- give more meaningful names to ap-bp gpios,
Change-Id: I1a7eea918c15271b90fb09ce882eff1691a28c21
Signed-off-by: James Wylder <james.wylder@motorola.com>
P0 and later models were changed to put the cpu_vdd regulator
in MODE 1, rather than the previous MODE 3 value. This caused
DVFS to appear to work but actually have no impact on the
cpu voltage.
In addition, when resuming from LP0, the CPU voltage must be
1.0v. To guarantee this, the voltage needs to be set upon
entering suspend, so when the regulator is re-enabled, it is
the correct voltage before code begins executing.
Change-Id: I3580c832dbb4b5ce9ce7bd0089352a72b3b3869c
Signed-off-by: Greg Meiste <w30289@motorola.com>
With this change, the regulator framework can configure the regulator
for suspend if necessary.
Change-Id: Idf1fc085d7182368ae1bfdcc54cf3c8de0f93005
Signed-off-by: Greg Meiste <w30289@motorola.com>
The regulator framework may need to change certain regulators when
entering suspend.
Change-Id: I584e92b3c32cbd1a63325831822e2704a3dd2774
Signed-off-by: Greg Meiste <w30289@motorola.com>
Remove unpowergating of 3d on board init to let the host1x driver
handle it.
Remove enabling hw module clocks on board init for modules behind
host1x.
Keep pll_m clock force-enabled for now as the pll clk disable code
path is not fully functional.
Change-Id: I4721d117b736a591b3cf3ee9f8967b88212f88b8
Signed-off-by: Erik Gilling <konkers@android.com>
This fixes an issue where uncompleted urbs get added to the pending
anchor.
Change-Id: I9504fea0ca42e9d18dfe255744ba8f6638e1f324
Signed-off-by: Benoit Goby <benoit@android.com>
On P2 hardware, PS7 is now connected to CHG_DISABLE. HS_DET_EN has not
been connected (or needed) since M1, so audio should not be controlling
PS7.
Change-Id: I19b96295cb956bffdd1f4b0e7ba48b1a0bec3242
Signed-off-by: Greg Meiste <w30289@motorola.com>
Previously, charging was being reporting whenever a charger was present.
While true most of the time, there are cases where that won't be the
case. This patch updates the driver to only report charging if charging
is actually occurring.
Change-Id: Ibc5881fed5d11f89d87d0c7adcd7ac1c2b273688
Signed-off-by: Greg Meiste <w30289@motorola.com>
Just because the charger is present, doesn't mean that the battery is
being charged. For example, the battery can be overheating, which
will prevent charging.
Change-Id: If5d8dc325fc6dc507808216f1e45a180d74b5d73
Signed-off-by: Greg Meiste <w30289@motorola.com>
USE ABS_MT_TRACKING_ID to report the finger tracking id
Change-Id: I8198eea12c5a90607a6dab48d96c6872a1c5e783
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Pull-ups on ULPI pins must be disabled to select the Link ULPI
PHY interface (TRM 25.3.3.2).
Change-Id: Ic9a4a798954c97c10360a5968ad4184a07cc6ee4
Signed-off-by: Benoit Goby <benoit@android.com>
The Tegra root hub sometines does not enumarate the device when the OTG
cable is first inserted. Delaying the activation of vbus, to leave time
for the controller to initialize seems to fix the problem.
Change-Id: I2c374a98b2931bc724efb1678fad4fbb873b2a3b
Signed-off-by: Benoit Goby <benoit@android.com>
Dynamically add/remove the ehci platform device and use
vbus_connect/vbus_disconnect to notify the gadget driver of
OTG state changes.
Only enable the clock when needed, as we rarely need to access
the registers.
Change-Id: Id198822c58f50252361333c3a99c416a3baaace2
Signed-off-by: Benoit Goby <benoit@android.com>
The cpcap-otg driver will register the device when ID pin is grounded
Change-Id: Ibe95dcd00d7e1dfe0103ca94b59afe8769d91759
Signed-off-by: Benoit Goby <benoit@android.com>
Touch should be disabled after the display is suspended and enabled
before the display is resumed. Resuming after the display can cause
touch to stop functioning.
Change-Id: Ib9861b325994ebfbf3e93554aaa86747f7bde469
Signed-off-by: Greg Meiste <w30289@motorola.com>
UARTE used by GPS is a 3-wire connect between
Broadcom chip and Tegra.
uart5_cts_n is not connected, pull down on the
pin group keeps cts line low.
Change-Id: I8c9fa70058e92fce3c09e036051cb89b4c808434
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Removed threshold boundaries as they are no longer needed.
Change-Id: Ie395f9042fbf3e61ca0c6ff448441f52fc5929f9
Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
When the 100K ID PU is enabled, it puts the basic dock into audio
mode. The EMUMODE bits in CPCAP should also be configured so
audio can be routed out the D+/D- lines.
Change-Id: I9bc7718391156932c116c980ccb4d41942356c8b
Signed-off-by: Greg Meiste <w30289@motorola.com>
Also remove management of vcam ioctl, it will now be managed by
the focuser driver
Change-Id: I8114d831bbe62019ec022003fb61bd354093ee85
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Add ability to read sensor otp.
Add support for pattern generators.
Cleans up the ioctl parameters.
Change-Id: I78b585fb94b5d97e2adebe718972019e4e2142de
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
