vcc_3v0: supply for wifi bt module, should keep enable in sleep mode.
vcc1v8_dvp: supply for camera, should be off in sleep mode, otherwise,
increase current consumption.
Change-Id: Idfd10f7b8f6fca6db1760e429acc9b215a8cf595
Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
When get leakage failed, we assume the leakage is zero.
Change-Id: I7731eaaa6dc31620d0210c1c9138631b8890be8d
Signed-off-by: Liang Chen <cl@rock-chips.com>
add power model for gpu and also add cpu thermal config
Change-Id: Iab5ef69b50c792b35c9ae5ffa863cc106d2c4292
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
since only rk3288 can run on 600MHz, and sometimes other socs
will step into the 600MHz branch when its 3th register value can
meet the condition, it will cause rkvdec crash.
Change-Id: I3668aa22a3d82af6af2c87ca970028685b8b1960
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>
The FPGA platform is used for rk3308 validation, which has
one cortex-a35 cpu and uart/timer peripherals.
Change-Id: I3a78cc5afec04d954f4d2715b6a6066400a1c513
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
RK3308 is a Soc from Rockchip, which embedded with quad
ARM Cortex-A35 and highly integrated audio interfaces.
This patch add basic support for it, with arm cpu core
timer/gic/uart/pinctrl enabled.
Change-Id: I924827146fab30bf636440ce3cc7e48c74bc0eaf
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
As enable the releated config, hit the below error:
drivers/media/i2c/soc_camera/rockchip/adv_camera_module.c:937:34: error:
assignment to expression with array type
timings->exposure_valid_frame =
...
and
drivers/media/i2c/soc_camera/rockchip/tc_camera_module.c:963:34: error:
assignment to expression with array type
timings->exposure_valid_frame =
....
Change-Id: I4381cc8aa00bb6a968c01d7537a8942b5715fa5c
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Base on the evb board, the mode of RMII REF_CLK need to be setup for input.
Change-Id: I06220d3422835a456b5567d7797a008d313e185a
Signed-off-by: David Wu <david.wu@rock-chips.com>
Need to setup the speed setting for 10/100, otherwise the gmac can't
work.
Change-Id: I92a410b7b453e145fecc817841eecc54afca4051
Signed-off-by: David Wu <david.wu@rock-chips.com>
pwrkey node is necessary for U-Boot RK817/RK809 pwrkey driver,
because the device-driver model requires it to make a match.
Change-Id: Ica766232646ba93508592ab1a20b65157859d688
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
For 3328, inno hdmi phy post pll is enabled by default, it's need to
manual power down post pll if uboot logo is not shown.
Change-Id: Ia175ff0aad006be950b8bc13e1cf2ecb4f00e04c
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
now shutdown function just wait for vpu finishing his work,
and do nothing else.
Change-Id: I54f227768314edd85154705d07054bd493e350aa
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>
If show logo in uboot, can't change vop clocks.
Change-Id: Ia149b452e16dedcafaa15bfa5d5dc989b06737ff
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Make the printks look a bit nicer by adding a prefix.
Change-Id: Id268a55a1681c6805e7c3f5929350891e92df816
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
distinguish MIC input differential or single-ended
disable DAC_D_HPF
add pdm support
Change-Id: Id2befb3f817c9eaf273e1120036cf013db463639
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
This solve failed to linkup for very few chip
This can reduce udp package lost rate sometimes
Change-Id: I684d9ea974e56478e7906c6e79c4c8505c042823
Signed-off-by: Weiguo Hu <hwg@rock-chips.com>
Just follow the convention of fixing for DTO timeout.
Change-Id: I753b5a6f2ab409e58c83a59212592f3b430b018a
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
1. adjust vdd_logic to 950000uV.
2. adjust vdd_arm to 950000uV.
3. set vdd_10 on.
4. set vcc3v0_pmu on.
Change-Id: I1af72ccbc615f6bdcb59f51ac6ea54e8c3bfe2af
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
remove the 'regulator-always-on' property from vcc3v3_lcd
Change-Id: I056601ed575b993065c17d245195bd376808bbed
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
If change parent to alternate parent and the old parent clock speed is less
than the clock speed of the alternate parent, add dividers first and then
select alternate parent.
If change parent to primary parent, select primary parent first and then
remove dividers.
Change-Id: Ib82de9a936effe5c885639799f3bb5629dc89f8d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
The gpll clock has not yet been created when its children do enable and
prepare in cru critical talbe, so move its children into pmucru critical
talbe that the gpll clock has been created before its children do enable
and prepare.
Change-Id: If5243326bf1d3c926bb1bb12e56e4b9fc9282762
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
If xin32k use the rk808_clkout1, rk808 init is too late,
xin32k enable count and prepare count is not match with it's child clk.
Change-Id: Iec5d1f91b2289b18f41b4d915e6859154a5b7635
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
