PD#SWPL-1127
Problem:
when dv output hdr mode, the quantization range is default value
instead of limited range
Solution:
set quantization range to limited range in avi info
Verify:
t962e (txlx)
Change-Id: Ib4fbeb1c7efcedd7194143772ee5c663284a1c77
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2046
Problem:
some of the remaining 64bit boards do not support 32bit.
Solution:
modify the dts to support 32bit.
Verify:
axg, g12a, g12b, gxl, gxm, txl, txlx.
Change-Id: I951f8d32b18243a64e2abc5008bbb015c2e21e7a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1909
Problem:
mem rw exception caused crashed.
Solution:
1. add mapping the highmem address by the func vmap().
2. remove the flag CODEC_MM_FLAGS_CPU if not necessary.
Verify:
p212, w400
Change-Id: I982c775d7c009335cae5802f0eb6287d22037db6
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-1909
Problem:
On 32bit kernel, codec cma is located in normal zone by
"alloc-ranges" parameter with large size. This takse up
memory space for kernel and drivers. Sometimes we can see
memory allocation fail log but there are still enought
free pages. But most of these pages are CMA pages.
Solution:
Move codec cma location to high memzone. On 32bit, low
768MB memory is normal zone.
This change also correct first 1MB memory lost problem
for chips later than TXLX
Verify:
P212
Change-Id: I4592d34d08ee4dbb6700bbbfc4e0fadaceab0310
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1618
Problem:
Add afbc support on g12a and txlx
Solution:
add afbc support on g12a and txlx
Verify:
T962X-R311, U200(G12A)
Change-Id: Ia0cce8516a98653b01c3bc628e812c3a81b1df59
Signed-off-by: huaihao.guo <huaihao.guo@amlogic.com>
PD#SWPL-206
Problem:
overscan set error when local play
Solution:
overscan don't set at vpp
Verify:
verify on txlx
Change-Id: Ifd4ad4f5fcdb9fbc7ad05a540d0ed11b24d4ca66
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-1774
Problem:
DD program has avysnc problem over one night play
Solution:
fix the apts set bug
Verify:
p321
Change-Id: I0f6a5b47d3e3171a3dd8fa9a0b721cd11ec20b9e
Signed-off-by: live.li <live.li@amlogic.com>
PD#IPTV-55
Problem:
When connect to a Samsung TV(support 4k60 422 12bit), get a wrong
0 of 'echo 2160p60hz422,12bit > valid_mode'
Solution:
Remove a wrong Y422 format judgement
Verify:
P212
Change-Id: Ic0f2cefc1e0893390ac38298b55272877d81e04b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1303
Problem:
For TXLX/T962E/R321 cases, there are both HDMI TX and RX.
Should consider it as repeater.
Solution:
Enable repeater_tx in r321/atom dts
Also, add a missing ksv_lists[] clear.
Verify:
r321/atom
Change-Id: I7b512c34123481380220f9262466fde56b0ae6e3
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-972
Problem:
audio crash when ATV switch channel long time burning test
Solution:
there is a risk to fetch the timer lock. when input stop, stop_timer
will call del_timer, at the same time the function
"aml_i2s_hrtimer_callback" is waiting for the timer lock,after
stop_timer release the lock,"aml_i2s_hrtimer_callback" get the
lock and call mod_timer again, which will set the timer to pending
status. It will cause the next "start input" stage,add_timer will
trigger BUG_ON.Now we put the lock before the active status
checking then we will not touch the timer.
Verify:
Need burning test
Change-Id: I1fb66903a4d31e9491ac0533e477e1597575d4cf
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#165143
Proble：
fine-tune voltage OPP
Solution:
fine-tune voltage OPP
Verify:
G12A/G12B,PASS
Change-Id: I0b3fb0e4624e2ddfa635c8225a740ed7a8ff3e51
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#SWPL-122
Problem:
ddr bandwidth is tightly in many cases, such as HDR/4K video playing,
and then refresh osd at the same time
Solution:
in most cases the problem is refreshing osd when bandwidth tightly,
so detect ddr bandwidth usage except mali and reduce it when it is tightly
Verify:
verify by p321/r311
Change-Id: Ia594f08dbe9a8a7a8d78b5104c93bddaa8229c0b
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
PD#SWPL-1010
Problem:
some errors of reg address.
Solution:
modify to support 32bit.
Verify:
w400.
Change-Id: Ia35e95ac59084a9c57a9a4ab32fecb64f78c772e
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#163001
Problem:
hdr mode set not supported
Solution:
add hdr mode set via meson-hwc support
Verify:
verified in u200 board
Change-Id: Iaad75982003870f9469e4155aedb9c13349b60b9
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#163001
Problem:
uboot logo scaler down in 4k
Solution:
uboot logo size adjust when vout changed before
first page flip command
Verify:
verified in u200 board
Change-Id: Ic23e695fe716811eaf3faa62069c808a03c26f9d
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#166793
Problem:
conditional statement not is valid.
Solution:
change type u32 to type int.
Verify:
module owner confirmed.
Change-Id: I9fdfa444b29104c7afc9b7a380748ebe82ed390b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#163001
Problem:
current osd code have one line missing issue in meson-hwc
Solution:
osd blend used +1 line to fix shift issue,
and used freescale to cut it.
Verify:
verified in u200 board
Change-Id: I2354742d456327d9f1aa5713ee782648895034db
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-1630
Problem:
add cvbs/hdmi/lcd bist test on vout
Solution:
add cvbs bist test on vout
Verify:
test pass on u200/p212
Change-Id: Ie61d9b0d63649ec3022fd720068b689f4d721e3b
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1636
Problem:
1.pc bad value in kernel panic after change source.
2.System crash down when change source.
Solution:
optimize atv demod code.
Verify:
verified by p321
Change-Id: I655d1253950475dfb49ae1b174597797000adb73
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-743
Problem:
The picthre is shaking when press DVD remote
control in AV source
Solution:
add delay work for vlock process interlace input
Verify:
T962X-R311
Change-Id: Ic2ed077e0684ecc6b0990336e7a4ab7022931886
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#174488
Problem:
segmentation in descriptive information is reasonable and
should be allowed.
Solution:
modify the check codes.
Verify:
test locally.
Change-Id: I5e34ef2dd26077bb54adee7597a1aa3c789566c9
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1942
Problem:
add atom.dts support 32bit.
Solution:
modified length of reg, mem etc.
Verify:
r321
Change-Id: I2a518af2a76b8cb17ded68e994c3065072b92b9c
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1819
Problem:
lack of isp and galcore support in buildroot dts
Solution:
merge configurations from skt board
Verify:
local
Change-Id: I5936341fc24719f345c7707e16e692ae292ca6fe
Signed-off-by: Jun Zhang <jun.zhang@amlogic.com>
PD#169128:
[Problem]
When quick switch video between 2 vsync isr, the AFBC may read wrong
data, and green screen or distortion image occurs.
[Solution]
1. Add delay when get video layer state, to make sure afbc is stopped
2. Remove ambiguous log print
[Platform]
Blanche
BranchTo: NONE
[Test]
Change-Id: I94ccf25373f29ce188829ab1b7db6f9df1fb49ad
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
PD#SWPL-1631
Problem:
If Cortex A73 accessed memory near secure memory range, an
SError may occur due to prefetch of A73 core.
Solution:
Add clear mmu property for arm platform
Verify:
W400
Change-Id: I2e396f77772aeea231d0bf5f38a81440117ecdd6
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1224
Problem:
There will sound noise when switch hdmi port.
Solution:
Remove bandgap off when close port.
Verify:
Locally
Change-Id: Ibd9be3aa6f32072918f7b1ec151463452b2b879a
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#OTT-144
Problem:
after the dark screen, the adc button does not work
Solution:
The adc_keypad introduces earlysuspend for MID project:
after the LCD backlight disable, prevent the user from
pressing the key to open some applications and not complete standby.
Now check the adc button using the "system_freezable_wq" system queue,
which replaces the function of the code.So can remove it.
Verify:
g12b socket
Change-Id: I2333ba3dc406d2624962d116293a0b9d36f97534
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-1184
Problem:
emmc data crc error
Solution:
Modify delay of command line
Verify:
A113d_s400
Change-Id: I7211da9da75569aebaf0c2790e3134e88a6f3077
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#IPTV-14
Problem:
3D Benchmark.apk crash
Solution:
Add swp instruction support on armv8
Verify:
local
Change-Id: Ice2bef5c0ef7110b3adb4af811f99d4bfca1e8dc
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-418
Problem:
TXL can't bootup
Solution:
revert it
Verify:
p321
Revert "cec: for support multi-logical address [2/2]"
This reverts commit cc185dc81d.
Revert "cec: for support multi-logical address [1/2]"
This reverts commit b7922078ea.
Change-Id: I1cef0ac194464d75ffff3fe765f15b5f944406b2
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
PD#SWPL-1631
Problem:
If Cortex A73 accessed memory near secure memory range, an
SError may occur due to prefetch of A73 core.
Solution:
Remove mmu maping of secure memory range.
Note: must add clear-map and set clear range property in DTS
Verify:
W400
Change-Id: I718919c1b4873584eb87e00332622a1626672808
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#172483
Problem:
Add reserved & cma support for 4.9.
Solution:
1. add tvp padding, for test.
2. add no-cma-tvp,to force not used cma for tvp.
3. add nomap for reserved memroy detective.
4. add res & cma two mem region on same board.
5. add clear-map property for codec_mm_cma.
Verify:
Test this function with Android_O-MR1(GTVS) & ExoPlayer.
Change-Id: Ib20e0e9bc4725afb271de97543ce5ebf3bfcfb29
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
PD#174683
Problem:
kernel emmc ffu is not supported.
Solution:
add emmc ffu update support with mmc untils.
Verify:
p212
Change-Id: Ice9ffb174c061e3f114b0b68af290492808b0a5e
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-940
Problem:
Need ops id api for S805Y
Solution:
Add ops id api
Verify:
s805y_p215
Change-Id: I179f87acbc3f57456e0359bd0d502c58cc3a9b9c
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
PD#SWPL-766
Problem:
av output level only 100mv
Solution:
change the channel map for av out,
use orignal pcm for output w/o volume
control and postprocess.
Verify:
verified by r311
Change-Id: Ibeaf0ecfda03f81ff6061dc9c4975049452ba659
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#174736
Problem:
Some usb device may disconnect when handshake
Solution:
tuning disconnect threshold when usb host initial
now default is 0x24, only three value can tuning, 0x2c,0x34,0x3c
we set 0x34 now
Verify:
Google estelle boards which return from factory
no side effect on refernce u200 board
Change-Id: I71d974a6bac43452b20bd7f2a6827d3a46fa39fb
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-574
Problem:
xfrm test failed randomly in VtsKernelNetTest
due to random failed in gcm(aes)
Solution:
Use ARMCE for small sized crypto processing and use
copy mode when HW dma is used
Verify:
verified on ampere
Change-Id: I31cd75cfcd85da9fc9e9640135c7ce76623ef715
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
