Some vop can't support 10bit mode, if connector needs 10bit output,
force to use 8bit rgb888 mode, because the hardware would do the
format convert.
Change-Id: I8cdfbab12dd0ad63d36f3c52a4c7786a2bdbe6a1
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
policy->governor_data will be use in cpufreq_sched_thread, but it is init
after wake thread, it will cause NULL point access.
Change-Id: I320a3da34560e49f293211be92cb8310d8e395d7
Signed-off-by: Chen Liang <cl@rock-chips.com>
If we do not limit the freqency immediately when the cpu is overheat,
thermal driver will lost the control of temperature. So implement event
CPUFREQ_GOV_LIMIT for governor to limit the freqency immediately.
Change-Id: Id709edd377226417ead92ead2ae3d3d19b3eeabf
Signed-off-by: Chen Liang <cl@rock-chips.com>
The hardware-tracked trips will set the alarm interrupt value for
registers. Then when the thermal zone has no trips to be set,
That make the thermal trips callback a over range value.
The root cause is the rk_tsadcv2_temp_to_code() function to handle the
invalid temperature range is indeed incorrect, let's fix it on now.
Otherwise, the thermal alarm interrupt will be triggered all the time
on some SoCs.
Fox example:
localhost tmp # grep thermal /proc/interrupts; sleep 5;
grep thermal /proc/interrupts
23: 994830 .. GICv3 129 Level rockchip_thermal
23: 1003423 .. GICv3 129 Level rockchip_thermal
Change-Id: I0ddbd0b2dd9c03e785e588f5f339f1eeed4e1c5c
Reported-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-pm@vger.kernel.org
(am from https://patchwork.kernel.org/patch/9192357/)
Due to there are only two vop module, that's to say we can't keep
enable eDP / LVDS / HDMI at the same time, so this time we still
keep LVDS device disabled. If you want to enable lvds device,
then you should disable the HDMI or eDP device, and enable the
LVDS device.
And one more thing that eDP panel and LVDS panel can't enable at
the same time, cause both of them have the same enable gpio. If
you still want to do this, there is an hack way that delete the
'enable-gpios' comptabile from 'lvds-panel'.
Change-Id: Iecf71adc4d307dcdb8b7317a93430e99bb12e20a
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Add the basic node for the lvds controller of rk3288 and hook it into the
display-subsystem hirarchy.
Change-Id: I150f27e5d9a626342c4fe984167f94ae717ab9ad
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Add pinctrl settings for the configurable lcdc0 signals dclk, den, hsync
and vsync. The lcdc0 data pin configuration is not software controlable.
Change-Id: I733179908fd4276e919fe44c6125d504926d751a
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
This adds support for Rockchip soc lvds found on rk3288
Change-Id: Iaab32c8c02fb17bf55db97a7952a346ce45c7d09
Signed-off-by: Mark Yao <yzq@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Fill atomic needed funcs with default atomic helper library.
Rockchip use dw_hdmi, and drm/rockchip will covert to atomic api,
we need dw_hdmi support atomic funcs.
Now another drm driver use dw_hdmi is imx, not yet atomic, so
check DRIVER_ATOMIC at runtime to spilt atomic and not atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Change-Id: I519527efaf88b1e5c1b30db1fd23e59d45b88d50
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(cherry pick from 2c5b2cccdb)
A single blank line is enough to separate Kconfig entries.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Change-Id: I325951cc36a4429a8313b61e3f3a44aa24e49958
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(cherry pick from dae91e4d1c)
For consistency with other drivers, use dashes instead of underscores in
filenames.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Change-Id: Ie872685143935c365b40c3aaf2a104879478ea66
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(cherry pick from 248a86fc30)
We don't use swiotlb, so keep the size as small as possible.
Change-Id: I1377f4b31112902a5841eafde094d2d12f48e97c
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
This allows monitoring external connectors by userspace
via sysfs and uevent and supports external connectors with
multiple states. And extcon notifier mechanism is also
useful.
Change-Id: I670da8efbe20f8f12529e9e062fc38b514524dc3
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
This allows monitoring external connectors by userspace
via sysfs and uevent and supports external connectors with
multiple states. And extcon notifier mechanism is also
useful.
Change-Id: I7aba50c294b04d48bf5d43bfd90a8280fcbd1081
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
If "CONFIG_ANDROID" and "CONFIG_SWITCH" are enabled,
/sys/class/switch/* are created in switch classe driver,
so we can't create switch class again in extcon.
Change-Id: Ida627cfdbb3ecb6f0aa40af146a66897edafd2fe
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
In less than 10 ms, the temperature of soc will arise 10 degree. 250 ms
is too big for soc tempeture control. Setting 2.5 ms will speed up
temperature accessing speed but introduce no more cpu's computing overhead.
We set AUTO_PERIOD_TIME and TSADCV3_AUTO_PERIOD_HT_TIME the same value,
because normal temperature update speed is also our consern in IPA.
Change-Id: Ie8038a1ae5837ad4aa31b04d1f3ace299f82e396
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Big cores' power consumption is as much as 8 times of little cores'.
Eas tends to bring tasks to big cores to assure the performance, and
this will make the temperature of soc out of control. To resolve this
issue, we set the power request weight of both little cores and gpu is
10 times of big cores, when temperature control occurs. Meanwhile, we
decrease passive polling interval to make temperature control more
accurate.
Change-Id: Ib01948c6a4f4383f03f1317b2397f07fbdc3487e
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Commit e22579713a ("ASoC: simple card: set cpu-dai sysclk
with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
asoc_simple_card_hw_params fail if the operation is not supported,
although the intention clearly was to ignore ENOTSUPP. Fix it.
The patch fixes audio playback on Kirkwood / OpenRD client,
where the following errors are seen:
asoc-simple-card sound: ASoC: machine hw_params failed: -524
alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524
Fixes: e22579713a ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit git.kernel.org broonie/sound.git for-next
ee43a1a0cd)
Change-Id: I979297fa31aa065338804186ee35de948c63a6a4
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
LSK 16.06 v4.4-android
* tag 'lsk-v4.4-16.06-android': (447 commits)
Linux 4.4.14
netfilter: x_tables: introduce and use xt_copy_counters_from_user
netfilter: x_tables: do compat validation via translate_table
netfilter: x_tables: xt_compat_match_from_user doesn't need a retval
netfilter: ip6_tables: simplify translate_compat_table args
netfilter: ip_tables: simplify translate_compat_table args
netfilter: arp_tables: simplify translate_compat_table args
netfilter: x_tables: don't reject valid target size on some architectures
netfilter: x_tables: validate all offsets and sizes in a rule
netfilter: x_tables: check for bogus target offset
netfilter: x_tables: check standard target size too
netfilter: x_tables: add compat version of xt_check_entry_offsets
netfilter: x_tables: assert minimum target size
netfilter: x_tables: kill check_entry helper
netfilter: x_tables: add and use xt_check_entry_offsets
netfilter: x_tables: validate targets of jumps
netfilter: x_tables: don't move to non-existent next rule
drm/core: Do not preserve framebuffer on rmfb, v4.
crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
netfilter: x_tables: fix unconditional helper
...
This reverts commit 857ad0187f.
Fixes by LSK commit b42fb9a710
("Revert "cpufreq: interactive: build fixes for 4.4"")
and commit de5723c8a6
("cpufreq: interactive: drop cpufreq_{get,put}_global_kobject func calls")
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
If mask is NULL skip the mask matching against the DMA device capabilities.
Change-Id: Iee44026c8d43493e4e73d8d483545267dc2e08a7
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(cherry picked from git.kernel.org next/linux-next.git master
commit 26b64256e0)
It would be better to name OPP nodes as opp@<opp-hz> as that will ensure
that multiple DT nodes don't contain the same frequency. Of course we
expect the writer to name the node with its opp-hz frequency and not any
other frequency.
And that will let the compile error out if multiple nodes are using the
same opp-hz frequency.
Change-Id: Icefba93f7a95752e344b5a092a83931bf4d1e682
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This reverts commit b664a51a07.
Upstream commit f55d84b07c ("stmmac: do not sleep in atomic context for mdio_reset")
fixes this bug.
Change-Id: I7332b3586640667f551c7e83eafff560a4f5a478
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
