[ Upstream commit 7f82f92231 ]
Since the beginning, charged is set to 0 to avoid calling vm_unacct_memory
twice because vm_unacct_memory will be called by above unmap_region. But
since commit 4f74d2c8e8 ("vm: remove 'nr_accounted' calculations from
the unmap_vmas() interfaces"), unmap_region doesn't call vm_unacct_memory
anymore. So charged shouldn't be set to 0 now otherwise the calling to
paired vm_unacct_memory will be missed and leads to imbalanced account.
Link: https://lkml.kernel.org/r/20220618082027.43391-1-linmiaohe@huawei.com
Fixes: 4f74d2c8e8 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5605148e6 ]
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
Call Trace:
<TASK>
show_stack+0x4e/0x53
dump_stack_lvl+0x51/0x66
print_address_description.constprop.0.cold+0xea/0x41e
print_report.cold+0x90/0x205
kasan_report+0xb9/0xf0
__asan_load8+0x69/0x90
srpt_enable_tpg+0x31/0x70 [ib_srpt]
target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod]
configfs_write_iter+0x18b/0x210
new_sync_write+0x1f2/0x2f0
vfs_write+0x3e3/0x540
ksys_write+0xbb/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Link: https://lore.kernel.org/r/20220727193415.1583860-4-bvanassche@acm.org
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ec787e1a ]
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688ee1d178 ]
Fix up the tty-port initialized comments which got truncated and
obfuscated when replacing the old ASYNCB_INITIALIZED flag.
Fixes: d41861ca19 ("tty: Replace ASYNC_INITIALIZED bit and update atomically")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6646e99bce ]
As part of Root Port interrupt handling, level-0 register is read first and
based on the bits set in that, corresponding level-1 registers are read for
further interrupt processing. Since both these values are currently read
into the same 'val' variable, checking level-0 bits the second time around
is happening on the 'val' variable value of level-1 register contents
instead of freshly reading the level-0 value again.
Fix by using different variables to store level-0 and level-1 registers
contents.
Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1117d182c5 ]
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62ac247355 ]
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy().
Fixes: 67a95c2146 ("HID: mcp2221: add usb to i2c-smbus host bridge")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d07a692f9 ]
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3056fc6c32 ]
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/dae34b5fd5c2ea2bd9744812c1d2653a34a94c67.1657706960.git.chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3236a64dd ]
__qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with
init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr"
is released while "mr->info.pbl_table" is not released, which will lead
to a memory leak.
We should release the "mr->info.pbl_table" with qedr_free_pbl() when error
occurs to fix the memory leak.
Fixes: e0290cce6a ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20220714061505.2342759-1-niejianglei2021@163.com
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8558476f ]
drivers/infiniband/ulp/rtrs/rtrs-clt.c:1786:19: warning: result of comparison of
constant 'MAX_SESS_QUEUE_DEPTH' (65536) with expression of type 'u16'
(aka 'unsigned short') is always false [-Wtautological-constant-out-of-range-compare]
To fix it, limit MAX_SESS_QUEUE_DEPTH to u16 max, which is 65535, and
drop the check in rtrs-clt, as it's the type u16 max.
Link: https://lore.kernel.org/r/20210531122835.58329-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e70cbd11b ]
Initialising the hwrng struct with zeros causes a
compile-time sparse warning:
$ ARCH=um make -j10 W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
...
CHECK arch/um/drivers/random.c
arch/um/drivers/random.c:31:31: sparse: warning: Using plain integer as NULL pointer
Fix the warning by not initialising the hwrng struct
with zeros as it is initialised anyway during module
init.
Fixes: 72d3e093af ("um: random: Register random as hwrng-core device")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d46f1ff2 ]
The simple_write_to_buffer() function will return positive/success if it
is able to write a single byte anywhere within the buffer. However that
potentially leaves a lot of the buffer uninitialized.
In this code it's better to return 0 if the offset is non-zero. This
code is not written to support partial writes. And then return -EFAULT
if the buffer is not completely initialized.
Fixes: cfad642538 ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ysg1Pu/nzSMe3r1q@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07903626d9 ]
According to the programming guide, it is recommended to
perform a GCTL_CORE_SOFTRESET only when switching the mode
from device to host or host to device. However, it is found
that during bootup when __dwc3_set_mode() is called for the
first time, GCTL_CORESOFTRESET is done with suspendable bit(BIT 17)
of DWC3_GUSB3PIPECTL set. This some times leads to issues
like controller going into bad state and controller registers
reading value zero. Until GCTL_CORESOFTRESET is done and
run/stop bit is set core initialization is not complete.
Setting suspendable bit of DWC3_GUSB3PIPECTL and then
performing GCTL_CORESOFTRESET is therefore not recommended.
Avoid this by only performing the reset if current_dr_role is set,
that is, when doing subsequent role switching.
Fixes: f88359e158 ("usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: Rohith Kollalsi <quic_rkollals@quicinc.com>
Link: https://lore.kernel.org/r/20220714045625.20377-1-quic_rkollals@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 628ccfc8f5 ]
The 'pdev' and 'netdev' need to be released in error cases of
iss_net_configure().
Change the return type of iss_net_configure() to void, because it's
not used.
Fixes: 7282bee787 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8864fb8359 ]
Provide release() callback for the platform device embedded into struct
iss_net_private and registered in the iss_net_configure so that
platform_device_unregister could be called for it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69695aeaa6 ]
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f897ae3d ]
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable
clocks and resets. This causes the driver to never set to a ready state
with the error 'Phy link never came up'.
This is caused by the PHY clock getting enabled before setting the required
bits in the PARF regs.
A workaround for this was set but with this new discovery we can drop
the workaround and use a proper solution to the problem by just enabling
the clock only AFTER the PARF_PHY_CTRL bit is set.
This correctly sets up the PCIe link and makes it usable even when a
bootloader leaves the PCIe link in an undefined state.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8795e182b0 ]
AER reporting is currently disabled in the DevCtl registers of all non Root
Port PCIe devices on systems using pcie_ports_native || host->native_aer,
disabling AER completely in such systems. This is because 2bd50dd800
("PCI: PCIe: Disable PCIe port services during port initialization"), added
a call to pci_disable_pcie_error_reporting() *after* the AER setup was
completed for the PCIe device tree.
Here a longer analysis about the current status of AER enabling /
disabling upon bootup provided by Bjorn:
pcie_portdrv_probe
pcie_port_device_register
get_port_device_capability
pci_disable_pcie_error_reporting
clear CERE NFERE FERE URRE # <-- disable for RP USP DSP
pcie_device_init
device_register # new AER service device
aer_probe
aer_enable_rootport # RP only
set_downstream_devices_error_reporting
set_device_error_reporting # self (RP)
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for RP
pci_walk_bus
set_device_error_reporting
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch
Port -> Endpoint hierarchy:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Enables Error Reporting for both Switch Ports,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port,
- Disables Error Reporting for the Switch Ports when pcie_portdrv_probe()
claims them. AER does not re-enable it because these are not Root
Ports.
Remove this call to pci_disable_pcie_error_reporting() from
get_port_device_capability(), leaving the already enabled AER configuration
intact. With this change, AER is enabled in the Root Port and the PCIe
switch upstream and downstream ports. Only the PCIe Endpoints don't have
AER enabled yet. A follow-up patch will take care of this Endpoint
enabling.
Fixes: 2bd50dd800 ("PCI: PCIe: Disable PCIe port services during port initialization")
Link: https://lore.kernel.org/r/20220125071820.2247260-3-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faa2f72cb3 ]
Each secure guest must have a unique ASCE (address space control
element); we must avoid that new guests use the same page for their
ASCE, to avoid errors.
Since the ASCE mostly consists of the address of the topmost page table
(plus some flags), we must not return that memory to the pool unless
the ASCE is no longer in use.
Only a successful Destroy Secure Configuration UVC will make the ASCE
reusable again.
If the Destroy Configuration UVC fails, the ASCE cannot be reused for a
secure guest (either for the ASCE or for other memory areas). To avoid
a collision, it must not be used again. This is a permanent error and
the page becomes in practice unusable, so we set it aside and leak it.
On failure we already leak other memory that belongs to the ultravisor
(i.e. the variable and base storage for a guest) and not leaking the
topmost page table was an oversight.
This error (and thus the leakage) should not happen unless the hardware
is broken or KVM has some unknown serious bug.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0c054930 ]
There are sleep in atomic context bugs when dm_fsync_timer_callback is
executing. The root cause is that the memory allocation functions with
GFP_KERNEL or GFP_NOIO parameters are called in dm_fsync_timer_callback
which is a timer handler. The call paths that could trigger bugs are
shown below:
(interrupt context)
dm_fsync_timer_callback
write_nic_byte
kzalloc(sizeof(data), GFP_KERNEL); //may sleep
usb_control_msg
kmalloc(.., GFP_NOIO); //may sleep
write_nic_dword
kzalloc(sizeof(data), GFP_KERNEL); //may sleep
usb_control_msg
kmalloc(.., GFP_NOIO); //may sleep
This patch uses delayed work to replace timer and moves the operations
that may sleep into the delayed work in order to mitigate bugs.
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220710103002.63283-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc2b7bfba ]
Unbinding an endpoint function from the endpoint controller shouldn't stop
the controller. This is especially a problem for multi-function endpoints
where other endpoints may still be active.
Don't stop the controller when unbinding one of its endpoints. Normally
the controller is stopped via configfs.
Fixes: 349e7a85b2 ("PCI: endpoint: functions: Add an EP function to test PCI")
Link: https://lore.kernel.org/r/20220622040924.113279-1-mie@igel.co.jp
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2cc5c465c ]
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 64 > /sys/module/dmatest/parameters/threads_per_chan
% echo 10000 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[ 89.480664] Unable to handle kernel NULL pointer dereference at virtual
address 00000000000000a0
[ 89.488725] Oops [#1]
[ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted
5.17.0-rc5
[ 89.509385] epc : vchan_find_desc+0x32/0x46
[ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6
This happens because of data race. Each thread rewrite channels's
descriptor as soon as device_prep_dma_memcpy() is called. It leads to the
situation when the driver thinks that it uses right descriptor that
actually is freed or substituted for other one.
With current fixes a descriptor changes its value only when it has
been used. A new descriptor is acquired from vc->desc_issued queue that
is already filled with descriptors that are ready to be sent. Threads
have no direct access to DMA channel descriptor. Now it is just possible
to queue a descriptor for further processing.
Fixes: 6973886ad5 ("dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00")
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Link: https://lore.kernel.org/r/20220701082942.12835-1-v.v.mitrofanov@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c3ace2b8b ]
Although harmless, the return statement in kvm_unexpected_el2_exception
is rather confusing as the function itself has a void return type. The
C standard is also pretty clear that "A return statement with an
expression shall not appear in a function whose return type is void".
Given that this return statement does not seem to add any actual value,
let's not pointlessly violate the standard.
Build-tested with GCC 10 and CLANG 13 for good measure, the disassembled
code is identical with or without the return statement.
Fixes: e9ee186bb7 ("KVM: arm64: Add kvm_extable for vaxorcism code")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220705142310.3847918-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df64077829 ]
The bus sdw_drv_remove() and sdw_drv_shutdown() helpers are used
conditionally, if the driver provides these routines.
These helpers already test if the driver provides a .remove or
.shutdown callback, so there's no harm in invoking the
sdw_drv_remove() and sdw_drv_shutdown() unconditionally.
In addition, the current code is imbalanced with
dev_pm_domain_attach() called from sdw_drv_probe(), but
dev_pm_domain_detach() called from sdw_drv_remove() only if the driver
provides a .remove callback.
Fixes: 9251345dca ("soundwire: Add SoundWire bus type")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220610015105.25987-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
