[ Upstream commit b9e7fc0aeda79031a101610b2fcb12bf031056e9 ]
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d4 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8e82a020a5c22f9b791f4ac499b8e18007fbda ]
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.
Fixes: 667daedaec ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025f2b85a5e5a46df14ecf162c3c80a957a36d0b ]
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48e ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06827e27fdcd197557be72b2229dbd362303794f ]
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f890 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c22921df777de5606f1047b1345b8d22ef1c0b34 ]
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 478689b5990deb626a0b3f1ebf165979914d6be4 ]
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84383b5ef4cd21b4a67de92afdc05a03b5247db9 ]
The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.
Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register
Fixes: b64e6a8794 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aa3ca956c46d849775eae1816cef8fe4bc8b50e ]
This function has a nested loop. The problem is that both the inside
and outside loop use the same variable as an iterator. I found this
via static analysis so I'm not sure the impact. It could be that it
loops forever or, more likely, the loop exits early.
Fixes: 3a616b92a9 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f558120cd709682b739207b48cf7479fd9568431 ]
iucv_sever_path() is called from process context and from bh context.
iucv->path is used as indicator whether somebody else is taking care of
severing the path (or it is already removed / never existed).
This needs to be done with atomic compare and swap, otherwise there is a
small window where iucv_sock_close() will try to work with a path that has
already been severed and freed by iucv_callback_connrej() called by
iucv_tasklet_fn().
Example:
[452744.123844] Call Trace:
[452744.123845] ([<0000001e87f03880>] 0x1e87f03880)
[452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138
[452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv]
[452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv]
[452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv]
[452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8
[452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48
[452744.124820] [<00000000d5421642>] __fput+0xba/0x268
[452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0
[452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90
[452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8
[452744.125319] Last Breaking-Event-Address:
[452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138
[452744.125324]
[452744.125325] Kernel panic - not syncing: Fatal exception in interrupt
Note that bh_lock_sock() is not serializing the tasklet context against
process context, because the check for sock_owned_by_user() and
corresponding handling is missing.
Ideas for a future clean-up patch:
A) Correct usage of bh_lock_sock() in tasklet context, as described in
Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/
Re-enqueue, if needed. This may require adding return values to the
tasklet functions and thus changes to all users of iucv.
B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.
Fixes: 7d316b9453 ("af_iucv: remove IUCV-pathes completely")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6044ca26210ba72b3dcc649fae1cbedd9e6ab018 ]
It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 405d9999aa0b4ae467ef391d1d9c7e0d30ad0841 ]
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ff72a2f67791cd4ddad19ed830445f57b30e992 ]
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b03 ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec145a18687fec8dd97eeb4f30057fa4debef577 ]
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9415d375d8520e0ed55f0c0b058928da9a5b5b3d ]
The cited commit accidentally replaced tgt_net with net in rtnl_dellink().
As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified
with IFLA_IFNAME or IFLA_ALT_IFNAME.
Let's pass tgt_net to rtnl_dev_get().
Fixes: cc6090e985 ("net: rtnetlink: introduce helper to get net_device instance by ifname")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05f76b2d634e65ab34472802d9b142ea9e03f74e ]
tp->scaling_ratio is not updated based on skb->len/skb->truesize once
SO_RCVBUF is set leading to the maximum window scaling to be 25% of
rcvbuf after
commit dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
and 50% of rcvbuf after
commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio").
50% tries to emulate the behavior of older kernels using
sysctl_tcp_adv_win_scale with default value.
Systems which were using a different values of sysctl_tcp_adv_win_scale
in older kernels ended up seeing reduced download speeds in certain
cases as covered in https://lists.openwall.net/netdev/2024/05/15/13
While the sysctl scheme is no longer acceptable, the value of 50% is
a bit conservative when the skb->len/skb->truesize ratio is later
determined to be ~0.66.
Applications not specifying SO_RCVBUF update the window scaling and
the receiver buffer every time data is copied to userspace. This
computation is now used for applications setting SO_RCVBUF to update
the maximum window scaling while ensuring that the receive buffer
is within the application specified limit.
Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5684ab1a0effbfeb706f47d85785f653005b97b1 ]
The MPTCP protocol allow setting sk_rcvlowat, but the value there
is currently ignored.
Additionally, the default subflows sk_rcvlowat basically disables per
subflow delayed ack: the MPTCP protocol move the incoming data from the
subflows into the msk socket as soon as the TCP stacks invokes the subflow
data_ready callback. Later, when __tcp_ack_snd_check() takes action,
the subflow-level copied_seq matches rcv_nxt, and that mandate for an
immediate ack.
Let the mptcp receive path be aware of such threshold, explicitly tracking
the amount of data available to be ready and checking vs sk_rcvlowat in
mptcp_poll() and before waking-up readers.
Additionally implement the set_rcvlowat() callback, to properly handle
the rcvbuf auto-tuning on sk_rcvlowat changes.
Finally to properly handle delayed ack, force the subflow level threshold
to 0 and instead explicitly ask for an immediate ack when the msk level th
is not reached.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-5-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05f76b2d634e ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b82af36efaa1787946e021aa3dc5410c05beeb ]
When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e22a3a9d4134d7e6351a2998771522e74bcc58da ]
Do not attempt to send any hci command to controller if *setup* function
fails.
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60dc98122110594d0290845160f12916192fc6d ]
The previous fix (7aeb25908648) only handles the unsol_event reporting
during interrupts and does not include the polling mode used to set
jackroll_ms, so now we are replacing it with
snd_hda_jack_detect_enable_callback.
Fixes: 7aeb25908648 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Co-developed-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20240726100726.50824-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 225990c487c1023e7b3aa89beb6a68011fbc0461 ]
The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.
Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.
Fixes: 9b01c885be ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baeaabf970b9a90999f62ae27edf63f6cb86c023 ]
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75c3e8a26a35d4f3eee299b3cc7e465f166f4e2d ]
When multi-monitor is cycled the X,Y position of the Screen Target will
likely change but the resolution will not. We need to trigger a modeset
when this occurs in order to recreate the Screen Target with the correct
X,Y position.
Fixes a bug where multiple displays are shown in a single scrollable
host window rather than in 2+ windows on separate host displays.
Fixes: 426826933109 ("drm/vmwgfx: Filter modes which exceed graphics memory")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624205951.23343-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9bf3efc33f1fbf88787a277f7349459283c9b95 ]
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and
hence the backing ttm_bo) leads to a refcount underflow.
Instead of calling nouveau_bo_ref() in the unwind path of
drm_gem_object_init(), clean things up manually.
Fixes: ab9ccb96a6 ("drm/nouveau: use prime helpers")
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-2-dakr@kernel.org
(cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5)
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c17736689ccfc44ec7dcc472577f25c34cf8724 ]
With 0dd5041c9a ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.
The path below could add a callchain_cursor_node with NULL ms.maps.
add_callchain_ip()
thread__find_symbol(.., &al)
thread__find_map(.., &al) // al->maps becomes NULL
ms.maps = maps__get(al.maps)
callchain_cursor_append(..., &ms, ...)
node->ms.maps = maps__get(ms->maps)
Then the path below would dereference NULL maps and get segfault.
fill_callchain_info()
maps__machine(node->ms.maps);
Fix it by checking if maps is NULL in fill_callchain_info().
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yzhong@purestorage.com
Link: https://lore.kernel.org/r/20240722211548.61455-1-cachen@purestorage.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8031b001da700474c11d28629581480b12a0d8d4 ]
Sensors discovery is independent of HID device initialization. If sensor
discovery fails after HID initialization, then the HID device needs to be
deinitialized. Therefore, sensors discovery should be moved before HID
device initialization.
Fixes: 7bcfdab3f0 ("HID: amd_sfh: if no sensors are enabled, clean up")
Tested-by: Aurinko <petrvelicka@tuta.io>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://patch.msgid.link/20240718111616.3012155-1-Basavaraj.Natikar@amd.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7b4ff2dcaed228cb2fb7bfe720262c98ec1bb9 ]
perf_callchain_store() return 0 on success, -1 otherwise, fix
callchain_trace() to return correct bool value. So walk_stackframe() can
have a chance to stop walking the stack ahead.
Fixes: 70ccc7c066 ("ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f70fd92df7529e7283e02a6c3a2510075f13ba30 ]
The correct interrupt line for RTC is line 8 on liointc1.
Fixes: e47084e116 ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ddad558997002ce67980e30c9e8dfaa696e163b ]
Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.
Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.
iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.
The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77584368a0f3d9eba112c3df69f1df7f282dbfe9 ]
The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240424064508.1886764-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d4355861d874cbd1395ec0edcbe4e0f6940738 ]
Add support for the i.MX8ULP platform to the eDMA driver. Introduce the use
of the correct FSL_EDMA_DRV_HAS_CHCLK flag to handle per-channel clock
configurations.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-5-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0a08ed25492b6437e366b347113db484037b9b9 ]
iMX95 move channel mux register to management page address space. This
prepare to support iMX95.
Add mux_addr in struct fsl_edma_chan. No function change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231221153528.1588049-4-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cb1f4080dd91c6e6b01dbea013a3f42341cb6a1 ]
mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile
In the above scenario, we can get a BUG_ON.
kernel BUG at fs/f2fs/segment.c:3589!
Call Trace:
do_write_page+0x78/0x390 [f2fs]
f2fs_outplace_write_data+0x62/0xb0 [f2fs]
f2fs_do_write_data_page+0x275/0x740 [f2fs]
f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
f2fs_write_data_pages+0x2d8/0x330 [f2fs]
do_writepages+0xcf/0x270
__writeback_single_inode+0x44/0x350
writeback_sb_inodes+0x242/0x530
__writeback_inodes_wb+0x54/0xf0
wb_writeback+0x192/0x310
wb_workfn+0x30d/0x400
The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty().
Cc: stable@vger.kernel.org
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration")
Reviewed-by: Chao Yu <chao@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66eca1021a42856d6af2a9802c99e160278aed91 ]
It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages(). Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.
Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:
CPU0 CPU1
---------------- ---------------
spin_lock(&pcp->lock);
__rmqueue_pcplist() {
zone_pcp_disable() {
/* list is empty */
if (list_empty(list)) {
/* add pages to pcp_list */
alloced = rmqueue_bulk()
mutex_lock(&pcp_batch_high_lock)
...
__drain_all_pages() {
drain_pages_zone() {
/* read pcp->count, it's 0 here */
count = READ_ONCE(pcp->count)
/* 0 means nothing to drain */
/* update pcp->count */
pcp->count += alloced << order;
...
...
spin_unlock(&pcp->lock);
In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.
Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()
[1] https://lore.kernel.org/linux-mm/6a07125f-e720-404c-b2f9-e55f3f166e85@fujitsu.com/
Link: https://lkml.kernel.org/r/20240723064428.1179519-1-lizhijian@fujitsu.com
Fixes: 4b23a68f95 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55f77df7d715110299f12c27f4365bd6332d1adb ]
Patch series "mm/treewide: Remove pXd_huge() API", v2.
In previous work [1], we removed the pXd_large() API, which is arch
specific. This patchset further removes the hugetlb pXd_huge() API.
Hugetlb was never special on creating huge mappings when compared with
other huge mappings. Having a standalone API just to detect such pgtable
entries is more or less redundant, especially after the pXd_leaf() API set
is introduced with/without CONFIG_HUGETLB_PAGE.
When looking at this problem, a few issues are also exposed that we don't
have a clear definition of the *_huge() variance API. This patchset
started by cleaning these issues first, then replace all *_huge() users to
use *_leaf(), then drop all *_huge() code.
On x86/sparc, swap entries will be reported "true" in pXd_huge(), while
for all the rest archs they're reported "false" instead. This part is
done in patch 1-5, in which I suspect patch 1 can be seen as a bug fix,
but I'll leave that to hmm experts to decide.
Besides, there are three archs (arm, arm64, powerpc) that have slightly
different definitions between the *_huge() v.s. *_leaf() variances. I
tackled them separately so that it'll be easier for arch experts to chim
in when necessary. This part is done in patch 6-9.
The final patches 10-14 do the rest on the final removal, since *_leaf()
will be the ultimate API in the future, and we seem to have quite some
confusions on how *_huge() APIs can be defined, provide a rich comment for
*_leaf() API set to define them properly to avoid future misuse, and
hopefully that'll also help new archs to start support huge mappings and
avoid traps (like either swap entries, or PROT_NONE entry checks).
[1] https://lore.kernel.org/r/20240305043750.93762-1-peterx@redhat.com
This patch (of 14):
When the complete PCP is drained a much larger number of pages than the
usual batch size might be freed at once, causing large IRQ and preemption
latency spikes, as they are all freed while holding the pcp and zone
spinlocks.
To avoid those latency spikes, limit the number of pages freed in a single
bulk operation to common batch limits.
Link: https://lkml.kernel.org/r/20240318200404.448346-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240318200736.2835502-1-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 66eca1021a42 ("mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52166607ecc980391b1fffbce0be3074a96d0c7b ]
In page allocator, PCP (Per-CPU Pageset) is refilled and drained in
batches to increase page allocation throughput, reduce page
allocation/freeing latency per page, and reduce zone lock contention. But
too large batch size will cause too long maximal allocation/freeing
latency, which may punish arbitrary users. So the default batch size is
chosen carefully (in zone_batchsize(), the value is 63 for zone > 1GB) to
avoid that.
In commit 3b12e7e979 ("mm/page_alloc: scale the number of pages that are
batch freed"), the batch size will be scaled for large number of page
freeing to improve page freeing performance and reduce zone lock
contention. Similar optimization can be used for large number of pages
allocation too.
To find out a suitable max batch scale factor (that is, max effective
batch size), some tests and measurement on some machines were done as
follows.
A set of debug patches are implemented as follows,
- Set PCP high to be 2 * batch to reduce the effect of PCP high
- Disable free batch size scaling to get the raw performance.
- The code with zone lock held is extracted from rmqueue_bulk() and
free_pcppages_bulk() to 2 separate functions to make it easy to
measure the function run time with ftrace function_graph tracer.
- The batch size is hard coded to be 63 (default), 127, 255, 511,
1023, 2047, 4095.
Then will-it-scale/page_fault1 is used to generate the page
allocation/freeing workload. The page allocation/freeing throughput
(page/s) is measured via will-it-scale. The page allocation/freeing
average latency (alloc/free latency avg, in us) and allocation/freeing
latency at 99 percentile (alloc/free latency 99%, in us) are measured with
ftrace function_graph tracer.
The test results are as follows,
Sapphire Rapids Server
======================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 513633.4 2.33 3.57 2.67 6.83
127 517616.7 4.35 6.65 4.22 13.03
255 520822.8 8.29 13.32 7.52 25.24
511 524122.0 15.79 23.42 14.02 49.35
1023 525980.5 30.25 44.19 25.36 94.88
2047 526793.6 59.39 84.50 45.22 140.81
Ice Lake Server
===============
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 620210.3 2.21 3.68 2.02 4.35
127 627003.0 4.09 6.86 3.51 8.28
255 630777.5 7.70 13.50 6.17 15.97
511 633651.5 14.85 22.62 11.66 31.08
1023 637071.1 28.55 42.02 20.81 54.36
2047 638089.7 56.54 84.06 39.28 91.68
Cascade Lake Server
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 404706.7 3.29 5.03 3.53 4.75
127 422475.2 6.12 9.09 6.36 8.76
255 411522.2 11.68 16.97 10.90 16.39
511 428124.1 22.54 31.28 19.86 32.25
1023 414718.4 43.39 62.52 40.00 66.33
2047 429848.7 86.64 120.34 71.14 106.08
Commet Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 795183.13 2.18 3.55 2.03 3.05
127 803067.85 3.91 6.56 3.85 5.52
255 812771.10 7.35 10.80 7.14 10.20
511 817723.48 14.17 27.54 13.43 30.31
1023 818870.19 27.72 40.10 27.89 46.28
Coffee Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 510542.8 3.13 4.40 2.48 3.43
127 514288.6 5.97 7.89 4.65 6.04
255 516889.7 11.86 15.58 8.96 12.55
511 519802.4 23.10 28.81 16.95 26.19
1023 520802.7 45.30 52.51 33.19 45.95
2047 519997.1 90.63 104.00 65.26 81.74
From the above data, to restrict the allocation/freeing latency to be less
than 100 us in most times, the max batch scale factor needs to be less
than or equal to 5.
Although it is reasonable to use 5 as max batch scale factor for the
systems tested, there are also slower systems. Where smaller value should
be used to constrain the page allocation/freeing latency.
So, in this patch, a new kconfig option (PCP_BATCH_SCALE_MAX) is added to
set the max batch scale factor. Whose default value is 5, and users can
reduce it when necessary.
Link: https://lkml.kernel.org/r/20231016053002.756205-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 66eca1021a42 ("mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
