The SCSI error handler calls scsi_unjam_host() which can call the queue
function ufshcd_queuecommand() indirectly. The error handler changes the
state to UFSHCD_STATE_RESET while running, but error interrupts that
happen while the error handler is running could change the state to
UFSHCD_STATE_EH_SCHEDULED_NON_FATAL which would allow requests to go
through ufshcd_queuecommand() even though the error handler is running.
Block that hole by checking whether the error handler is in progress.
Link: https://lore.kernel.org/r/20211008084048.257498-1-adrian.hunter@intel.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bug: 204438323
(cherry picked from commit d489f18ad1)
Change-Id: I11215e2217ed392ff3b57a89fc963558a1ef39bc
Signed-off-by: Bart Van Assche <bvanassche@google.com>
The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device. HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.
Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.
The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.
With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.
As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.
Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com
Tested-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bug: 204438323
(cherry picked from commit 09d9e4d041)
Change-Id: I81e4df5f95115491005ecea4cc39d1fa7b63b074
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Implement the ->restore() PM operation and set the link to off, which will
force a full reset and restore. This ensures that Host Performance Booster
is reset after suspend-to-disk.
The Host Performance Booster feature caches logical-to-physical mapping
information in the host memory. After suspend-to-disk, such information is
not valid, so a full reset and restore is needed.
A full reset and restore is done if the SPM level is 5 or 6, but not for
other SPM levels, so this change fixes those cases.
A full reset and restore also restores base address registers, so that code
is removed.
Link: https://lore.kernel.org/r/20211018151004.284200-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 4e5483b844)
Bug: 204438323
Change-Id: I2882c7958344819a738b924a0f712c92fad9a73a
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Bring the __ufshcd_transfer_req_compl() documentation in sync with the
upstream documentation. See also upstream commit 73dc3c4ac7 ("scsi: ufs:
Retry aborted SCSI commands instead of completing these successfully").
Bug: 204438323
(cherry picked from commit 73dc3c4ac7)
Change-Id: Ib412e0b88ba1e967f0fd486efec87d973f170f65
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Update the generic symbol list to include regulator_get_voltage symbol.
Bug: 208387726
Bug: 203172742
Signed-off-by: Cheney Ni <cheneyni@google.com>
Change-Id: Ifd8156506ed95aa4dff165e3fe982b630c077fa4
Update the generic symbol list to include send_sig_info symbol.
Bug: 208387726
Bug: 203079726
Signed-off-by: Cheney Ni <cheneyni@google.com>
Change-Id: I7d35ffe0565c13ca48b2bf55a6104585ad840022
Allow the following command to be run to make a build of fips140.ko
that has CONFIG_CRYPTO_FIPS140_MOD_EVAL_TESTING enabled:
BUILD_CONFIG=common/build.config.gki.aarch64.fips140_eval_testing ./build/build.sh
Bug: 188620248
Change-Id: I0e0be487974c6ad40f3135fc5fec6aa107aab78c
Signed-off-by: Eric Biggers <ebiggers@google.com>
Update the generic symbol list for coresight driver modules in
drivers/hwtracing/coresight.
Bug: 195134672
Change-Id: I7679c37d43aacc36cfbcb074bccaad744fcd6080
Signed-off-by: Yabin Cui <yabinc@google.com>
It is needed to add thread ids to ETM data.
Bug: 195134672
Change-Id: I3b15c5a09cd27e025b2e38def47494e195215399
Signed-off-by: Yabin Cui <yabinc@google.com>
Update the generic symbol list.
Bug: 201259891
Bug: 201260585
Signed-off-by: Rick Yiu <rickyiu@google.com>
Change-Id: I7ea749d0b7a9f0978e36a4273c8f85d1f9d4be9c
These hooks will do the following works:
a) Record the number of times when target_freq being clamped
b) Record the number of times when target_freq is greater than policy->cur
c) Make corresponding optimization strategies in different hooks
d) change the value of target_freq for some scenarios
Bug: 205906618
Bug: 206896672
Change-Id: I8eba66fd0c6d36393ca39045cf228b659834e0ae
Signed-off-by: Liujie Xie <xieliujie@oppo.com>
Signed-off-by: vincent.wang <vincent.wang@unisoc.com>
(cherry picked from commit 7e2fbdaeab)
Changes in 5.10.82
arm64: zynqmp: Do not duplicate flash partition label property
arm64: zynqmp: Fix serial compatible string
ARM: dts: sunxi: Fix OPPs node name
arm64: dts: allwinner: h5: Fix GPU thermal zone node name
arm64: dts: allwinner: a100: Fix thermal zone node name
staging: wfx: ensure IRQ is ready before enabling it
ARM: dts: NSP: Fix mpcore, mmc node names
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
arm64: dts: rockchip: Disable CDN DP on Pinebook Pro
arm64: dts: hisilicon: fix arm,sp805 compatible string
RDMA/bnxt_re: Check if the vlan is valid before reporting
bus: ti-sysc: Add quirk handling for reinit on context lost
bus: ti-sysc: Use context lost quirk for otg
usb: musb: tusb6010: check return value after calling platform_get_resource()
usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
ARM: dts: ux500: Skomer regulator fixes
staging: rtl8723bs: remove possible deadlock when disconnect (v2)
ARM: BCM53016: Specify switch ports for Meraki MR32
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property
arm64: dts: freescale: fix arm,sp805 compatible string
ASoC: SOF: Intel: hda-dai: fix potential locking issue
clk: imx: imx6ul: Move csi_sel mux to correct base register
ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect
scsi: advansys: Fix kernel pointer leak
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec
firmware_loader: fix pre-allocated buf built-in firmware use
ARM: dts: omap: fix gpmc,mux-add-data type
usb: host: ohci-tmio: check return value after calling platform_get_resource()
ARM: dts: ls1021a: move thermal-zones node out of soc/
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
ALSA: ISA: not for M68K
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
MIPS: sni: Fix the build
scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
scsi: target: Fix ordered tag handling
scsi: target: Fix alua_tg_pt_gps_count tracking
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
powerpc/5200: dts: fix memory node unit name
ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
ALSA: gus: fix null pointer dereference on pointer block
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
sh: check return code of request_irq
maple: fix wrong return value of maple_bus_init().
f2fs: fix up f2fs_lookup tracepoints
f2fs: fix to use WHINT_MODE
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: math-emu: drop unused functions
sh: define __BIG_ENDIAN for math-emu
f2fs: compress: disallow disabling compress on non-empty compressed file
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
clk: ingenic: Fix bugs with divided dividers
clk/ast2600: Fix soc revision for AHB
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
perf/x86/vlbr: Add c->flags to vlbr event constraints
blkcg: Remove extra blkcg_bio_issue_init
tracing/histogram: Do not copy the fixed-size char array field over the field size
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf bench futex: Fix memory leak of perf_cpu_map__new()
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.
net-zerocopy: Refactor skb frag fast-forward op.
tcp: Fix uninitialized access in skb frags array for Rx 0cp.
tracing: Add length protection to histogram string copies
net: ipa: disable HOLB drop when updating timer
net: bnx2x: fix variable dereferenced before check
bnxt_en: reject indirect blk offload when hw-tc-offload is off
tipc: only accept encrypted MSG_CRYPTO msgs
net: reduce indentation level in sk_clone_lock()
sock: fix /proc/net/sockstat underflow in sk_clone_lock()
net/smc: Make sure the link_id is unique
iavf: Fix return of set the new channel count
iavf: check for null in iavf_fix_features
iavf: free q_vectors before queues in iavf_disable_vf
iavf: Fix failure to exit out from last all-multicast mode
iavf: prevent accidental free of filter structure
iavf: validate pointers
iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
iavf: Fix for setting queues to 0
MIPS: generic/yamon-dt: fix uninitialized variable error
mips: bcm63xx: add support for clk_get_parent()
mips: lantiq: add support for clk_get_parent()
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()
net/mlx5: Lag, update tracker when state change event received
net/mlx5: E-Switch, Change mode lock from mutex to rw semaphore
net/mlx5: E-Switch, return error if encap isn't supported
scsi: core: sysfs: Fix hang when device state is set via sysfs
net: sched: act_mirred: drop dst for the direction from egress to ingress
net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove
net: virtio_net_hdr_to_skb: count transport header in UFO
i40e: Fix correct max_pkt_size on VF RX queue
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix display error code in dmesg
NFC: reorganize the functions in nci_request
NFC: reorder the logic in nfc_{un,}register_device
net: nfc: nci: Change the NCI close sequence
NFC: add NCI_UNREG flag to eliminate the race
e100: fix device suspend/resume
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
pinctrl: qcom: sdm845: Enable dual edge errata
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
s390/kexec: fix return code handling
net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devices
arm64: vdso32: suppress error message for 'make mrproper'
tun: fix bonding active backup with arp monitoring
hexagon: export raw I/O routines for modules
hexagon: clean up timer-regs.h
tipc: check for null after calling kmemdup
ipc: WARN if trying to remove ipc object which is absent
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
s390/kexec: fix memory leak of ipl report buffer
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
KVM: nVMX: don't use vcpu->arch.efer when checking host state on nested state load
udf: Fix crash after seekdir
net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform
btrfs: fix memory ordering between normal and ordered work functions
parisc/sticon: fix reverse colors
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
drm/amd/display: Update swizzle mode enums
drm/udl: fix control-message timeout
drm/nouveau: Add a dedicated mutex for the clients list
drm/nouveau: use drm_dev_unplug() during device removal
drm/nouveau: clean up all clients on device removal
drm/i915/dp: Ensure sink rate values are always valid
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
scsi: ufs: core: Fix task management completion
scsi: ufs: core: Fix task management completion timeout race
hugetlbfs: flush TLBs correctly after huge_pmd_unshare
RDMA/netlink: Add __maybe_unused to static inline in C file
selinux: fix NULL-pointer dereference when hashtab allocation fails
ASoC: DAPM: Cover regression by kctl change notification fix
usb: max-3421: Use driver data instead of maintaining a list of bound devices
ice: Delete always true check of PF pointer
fs: export an inode_update_time helper
btrfs: update device path inode time instead of bd_inode
x86/Kconfig: Fix an unused variable error in dell-smm-hwmon
ALSA: hda: hdac_ext_stream: fix potential locking issues
ALSA: hda: hdac_stream: fix potential locking issue in snd_hdac_stream_assign()
Revert "perf: Rework perf_event_exit_event()"
Linux 5.10.82
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I83443d373e075696b637074a9e5b615b460b8bc4
This reverts commit 94902ee299 which is
upstream commit ef54c1a476.
Reverting for now due to issues that need to get fixed upstream.
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 868ddfcef3 upstream.
The code for hdac_ext_stream seems inherited from hdac_stream, and
similar locking issues are present: the use of the bus->reg_lock
spinlock is inconsistent, with only writes to specific fields being
protected.
Apply similar fix as in hdac_stream by protecting all accesses to
'link_locked' and 'decoupled' fields, with a new helper
snd_hdac_ext_stream_decouple_locked() added to simplify code
changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef775a0e36 upstream.
When CONFIG_PROC_FS is not set, there is a build warning (turned
into an error):
../drivers/hwmon/dell-smm-hwmon.c: In function 'i8k_init_procfs':
../drivers/hwmon/dell-smm-hwmon.c:624:24: error: unused variable 'data' [-Werror=unused-variable]
struct dell_smm_data *data = dev_get_drvdata(dev);
Make I8K depend on PROC_FS and HWMON (instead of selecting HWMON -- it
is strongly preferred to not select entire subsystems).
Build tested in all possible combinations of SENSORS_DELL_SMM, I8K, and
PROC_FS.
Fixes: 039ae58503 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lkml.kernel.org/r/20210910071921.16777-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54fde91f52 upstream.
Christoph pointed out that I'm updating bdev->bd_inode for the device
time when we remove block devices from a btrfs file system, however this
isn't actually exposed to anything. The inode we want to update is the
one that's associated with the path to the device, usually on devtmpfs,
so that blkid notices the difference.
We still don't want to do the blkdev_open, so use kern_path() to get the
path to the given device and do the update time on that inode.
Fixes: 8f96a5bfa1 ("btrfs: update the bdev time directly when closing")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e60feb445f upstream.
If you already have an inode and need to update the time on the inode
there is no way to do this properly. Export this helper to allow file
systems to update time on the inode so the appropriate handler is
called, either ->update_time or generic_update_time.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ff04286a9 upstream.
PF pointer is always valid when PCI core calls its .shutdown() and
.remove() callbacks. There is no need to check it again.
Fixes: 837f08fdec ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc153aba3e upstream.
Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.
This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.
As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.
Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 827b0913a9 upstream.
The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.
This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().
Fixes: 5af82c81b2 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc27f3c5d1 upstream.
When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.
Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails.
Cc: stable@vger.kernel.org
Fixes: 03414a49ad ("selinux: do not allocate hashtabs dynamically")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4a118f2ee upstream.
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes: 24669e5847 ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 886fe2915c upstream.
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ef336fd2 upstream.
The UFS driver uses blk_mq_tagset_busy_iter() when identifying task
management requests to complete, however blk_mq_tagset_busy_iter() doesn't
work.
blk_mq_tagset_busy_iter() only iterates requests dispatched by the block
layer. That appears as if it might have started since commit 37f4a24c24
("blk-mq: centralise related handling into blk_mq_get_driver_tag") which
removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init()
which gets called:
blk_get_request
blk_mq_alloc_request
__blk_mq_alloc_request
blk_mq_rq_ctx_init
Since UFS task management requests are not dispatched by the block layer,
hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter()
relies on finding requests using hctx->tags->rqs[rq->tag], UFS task
management requests are never found by blk_mq_tagset_busy_iter().
By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal
details of the block layer, which was fragile and subsequently got
broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the
driver keep track of task management requests.
Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com
Fixes: 1235fc569e ("scsi: ufs: core: Fix task management request completion timeout")
Fixes: 69a6c269c0 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Cc: stable@vger.kernel.org
Tested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf55208391 upstream.
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c34bd4532 upstream.
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f55aaf63bd upstream.
The postclose handler can run after the device has been removed (or the
driver has been unbound) since userspace clients are free to hold the
file open as long as they want. Because the device removal callback
frees the entire nouveau_drm structure, any reference to it in the
postclose handler will result in a use-after-free.
To reproduce this, one must simply open the device file, unbind the
driver (or physically remove the device), and then close the device
file. This was found and can be reproduced easily with the IGT
core_hotunplug tests.
To avoid this, all clients are cleaned up in the device finalization
rather than deferring it to the postclose handler, and the postclose
handler is protected by a critical section which ensures the
drm_dev_unplug() and the postclose handler won't race.
This is not an ideal fix, since as I understand the proposed plan for
the kernel<->userspace interface for hotplug support, destroying the
client before the file is closed will cause problems. However, I believe
to properly fix this issue, the lifetime of the nouveau_drm structure
needs to be extended to match the drm_device, and this proved to be a
rather invasive change. Thus, I've broken this out so the fix can be
easily backported.
This fixes with the two previous commits CVE-2020-27820 (Karol).
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-4-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bec05f33eb upstream.
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45da9c1767 upstream.
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:
pc : submit_compressed_extents+0x38/0x3d0
lr : async_cow_submit+0x50/0xd0
sp : ffff800015d4bc20
<registers omitted for brevity>
Call trace:
submit_compressed_extents+0x38/0x3d0
async_cow_submit+0x50/0xd0
run_ordered_work+0xc8/0x280
btrfs_work_helper+0x98/0x250
process_one_work+0x1f0/0x4ac
worker_thread+0x188/0x504
kthread+0x110/0x114
ret_from_fork+0x10/0x18
Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 08a9ff3264 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: stable@vger.kernel.org # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9119570039 upstream.
According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.
Fixes: 5ec5582343 ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a48fc69fe6 upstream.
udf_readdir() didn't validate the directory position it should start
reading from. Thus when user uses lseek(2) on directory file descriptor
it can trick udf_readdir() into reading from a position in the middle of
directory entry which then upsets directory parsing code resulting in
errors or even possible kernel crashes. Similarly when the directory is
modified between two readdir calls, the directory position need not be
valid anymore.
Add code to validate current offset in the directory. This is actually
rather expensive for UDF as we need to read from the beginning of the
directory and parse all directory entries. This is because in UDF a
directory is just a stream of data containing directory entries and
since file names are fully under user's control we cannot depend on
detecting magic numbers and checksums in the header of directory entry
as a malicious attacker could fake them. We skip this step if we detect
that nothing changed since the last readdir call.
Reported-by: Nathan Wilson <nate@chickenbrittle.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af957eebfc upstream.
When loading nested state, don't use check vcpu->arch.efer to get the
L1 host's 64-bit vs. 32-bit state and don't check it for consistency
with respect to VM_EXIT_HOST_ADDR_SPACE_SIZE, as register state in vCPU
may be stale when KVM_SET_NESTED_STATE is called---and architecturally
does not exist. When restoring L2 state in KVM, the CPU is placed in
non-root where nested VMX code has no snapshot of L1 host state: VMX
(conditionally) loads host state fields loaded on VM-exit, but they need
not correspond to the state before entry. A simple case occurs in KVM
itself, where the host RIP field points to vmx_vmexit rather than the
instruction following vmlaunch/vmresume.
However, for the particular case of L1 being in 32- or 64-bit mode
on entry, the exit controls can be treated instead as the source of
truth regarding the state of L1 on entry, and can be used to check
that vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE matches vmcs12.HOST_EFER if
vmcs12.VM_EXIT_LOAD_IA32_EFER is set. The consistency check on CPU
EFER vs. vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE, instead, happens only
on VM-Enter. That's because, again, there's conceptually no "current"
L1 EFER to check on KVM_SET_NESTED_STATE.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211115131837.195527-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e35eba405 upstream.
As spotted and explained in commit c12ab8dbc4 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.
This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.
But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.
Of course, now that we really pin the DTLBs, it must be fixed as well.
Fixes: f76c8f6d25 ("powerpc/8xx: Add function to set pinned TLBs")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: c12ab8dbc4 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
