PD#TV-5393
Problem:
when pcr and vpts distance is far,
use the vpts as system time for
cache video to avoid video underrun
solution:
use vpts as system time for some
special ts stream
Verify:
x301
Change-Id: I2f151c526bb0113d4f0cf8bbd1a4772312857606
Signed-off-by: live.li <live.li@amlogic.com>
PD#SWPL-8032
Problem:
Switching to HDMI source is slower than T962
Solution:
ensure pll lock is table before do DWC reset
Verify:
T962X2
Change-Id: I1133d6b1fb532ab8460c1906a021fe133ea9fb83
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#SWPL-8050
Problem:
current driver does not support rca ir protocol
Solution:
add register setting and code for rca use REMOTE_RYPE_RCA to configure.
Verify:
G12b_W400 & tl1 x301
Change-Id: I76d860d66a43071803fb60debeafcbf18f42b283
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#TV-5143
Problem:
Kernel use dynamic vmalloc for binder. It have data sync problems
and will cause bad object when binder transaction.
Solution:
1. Revert dynamic vmalloc for binder.
2. Increase 128MB size for vmalloc
Verify:
P212
Change-Id: I20198b18d171fde0314868af394a6881979b3605
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-7837
Problem:
enable autosuspend function for tm2
Solution:
enable autosuspend function for tm2
Verify:
enable autosuspend function for tm2
Change-Id: I7e4c5015979bfc34de61bbbe551a3ebd7bfd11a4
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-7421
Problem:
ge2d not support multi plane fd
Solution:
add ge2d multi plane fd support
Verify:
Verfied on G12B-W400
Change-Id: Ia8a529833d5c53a70eaa2094f8110635e4f184c1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-7421
Problem:
gdc output not support multi plane fd
Solution:
add gdc multi plane fd support
Verify:
Verfied on G12B-W400
Change-Id: I898c027f068f92af5101fe65487baf1dfbec7c35
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#TV-5024
Problem:
afbc decode error when loop viu1 to vdin.
Solution:
set osd hold line to max if vinfo is dummy_panel
Verify:
Tl1 X301
Change-Id: I0ebb312d381accb1890233164f071a095310d2f1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-7855
Problem:
pcie A does not work when enable alone
---hcsl_r_exen[bit29]---pcie A gate [bit3]
|
---pcie B gate [bit28]
bit29/bit28: HHI_PCIE0_PLL_CNTL1
bit3: HHI_PCIE0_PLL_CNTL5
clk core will disable unused clock, So
CLK_IGNORE_UNUSED flag is necessary for
the three gates to avoid closing.
Solution:
add CLK_IGNORE_UNUSED flag for pcie gates
Verify:
test passed on tm2 ab31
Change-Id: I1121c75ab8fb847ec2ba1f7a0975619b36b0938e
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-7973
Problem:
upgrade failed, because can not found dts.
Solution:
change dts-id
Verify:
verify by u202
Change-Id: I9cfd85ebfda1bff60abc78bd09355f977f25f4bf
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7973
Problem:
s905d2 panel need new projects config.
Solution:
copy dts config from u200
Verify:
no need verify
Change-Id: I37a884ae951b8c6ede7adb065239ce59dca25c3a
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7960
Problem:
There is no min ddr bandwidth data
Solution:
Add this value in sysfs
Verify:
p212
Change-Id: I9d90476d30c0ca7789046d8d205f0802de2b4acf
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-3260
Problem:
Since the Super scaler on txlx has the latch function
and can not disable it. So need adjust the super scaler
on/off operation flow.
Solution:
write the enable bit of sr core0 directly, not rdma write.
Verify:
r311, verify pass
Change-Id: If1b27205cbb1c49dd6a3ad65a08e2ca1e3f04b62
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#TV-3132
Problem:
When playing 4K afbc and scaling down to small window,
the vskip is 1 and DDR freq is also lower, the display will
flicker caused by DDR bandwidth issue.
Solution:
Increase the afbc mif burst len from 2 to 4. And enable
the dmc adjustment in that case.
Verify:
r311, verify pass
Change-Id: Ia431a93f6083fd584b7e2eb14f777c5a5e7c20e7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-5661, PD#SWPL-5659
Problem:
1.add gain register to control the L and R channel audio gain.
2.add atv interrupt for signal lock and unlock.
Solution:
1.add gain register to control the L and R channel audio gain.
2.add atv interrupt for signal lock and unlock.
Verify:
verified by ab301 and ab311.
Change-Id: I8a7cbe538939dd9418e27165d4c83a8f473f119b
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#OTT-3314
Problem:
there is a invalid codec_mm pointer. which may cause crash
Solution:
add valid check before codec_mm release
Verify:
X301
Change-Id: Ie9b31f1a830e949a27cc58468cced8a9e4268808
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-7680
Problem:
mdelay will pend the system
Solution:
change mdelay to usleep_range
Verify:
HW verify
Change-Id: I8452dc7b1056378dbc6b743fc43316eccbf525a5
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-7778
Problem:
set tm2 vpp gain offset to 13bit
Solution:
set tm2 vpp gain offset to 13bit
Verify:
T962E2
Change-Id: I54ae9566050baeb73b7b1c94f87a3c43c76a2c62
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-7092
This reverts commit 68c4a4f8ab, with
various conflict clean-ups.
With the default root directory mode set to 0750 now, the capability
check was redundant.
Change-Id: If978c34cef8345b0ba67a038eed7d54d4f1423d6
Suggested-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
PD#SWPL-7680
Problem:
the pwn signal is self excitable
Solution:
1)add 10ms delay before pdn enable
2)set default clk for extern codec
Verify:
HW verify
Change-Id: I031b20851ee1eeb65215075fc8abe783ceddf42b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-7798
Problem:
Crashed when audio resample setting params
are invalid.
Solution:
Add check method if the params is invalid.
Verify:
Tl1.
Change-Id: I1e0396be8d401c0a49ff0de9fd7f160f0c8133ca
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-7452
Problem:
TV is no signal when turn off and turn on dishNXT box
Solution:
clear hdcp avmute status if hdcp is not start
Verify:
962X
Change-Id: I0448e46baea4f8666b2b665f6c867fecb41fb7d0
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#SWPL-7778
Problem:
black sreen when connecting dv TV
Solution:
close post matrix
open tm2 dv flag
Verify:
T962E2
Change-Id: I828b32d7bf2ef35c3f236ad9bf15964272d06dd2
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#OTT-3006
Problem:
The width and height of DOLBY_CORE2A reg are reversed
Solution:
Setting right width and height for DOLBY_CORE2A
Verify:
raven
Change-Id: I89d1a99d00122179bb35b5853a869819e5d62ac9
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-5404
Problem:
run hs400 200M on sm1
Solution:
config sm1 and modify dts
Verify:
passed on ac200
Change-Id: I34e54f88db79ce42f9effbf8d673ade613de328f
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-6398
Problem:
need open key_valid
Solution:
1,change panel.dtsi to open key_valid
Verify:
t962x3_ab301
t962x3_ab309
Change-Id: I6b0fa40efab9a50802d8391b9bb56101e471e8e5
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
PD#SWPL-6980
Problem:
memory bound tasks running in a high freq cluster will get a low performance
when another cluster freq is too low.
Solution:
We boost big cluster freq for a appropriate duration when we detect that
little cluster have lasting a period with highest freq.
Verify:
w400
Change-Id: Ic513604cb329992782c9c2e1d71273080e2e336a
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#SWPL-7166
Problem:
suspend resume test failed
Solution:
cancel work queue first
Verify:
verify on u200 board
Change-Id: Ibd1a9587a32edf5583db564d2efe0ff0279d4d10
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-7852
Problem:
android.security.sts.Poc16_11#testPocCVE_2016_6753 fail
Solution:
do not expose kernel addr info via cgroup_css_links_read
Verify:
U200
Change-Id: I74e4904e8b662db9d6589a1926c62c87e12d6f6f
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-7513
Problem:
When meet the non-dw afbc frame, vpp can not display with
scaling down as expected.
Solution:
Hold the current vpp setting and wait provider to switch
non-afbc.
Verify:
x301
Change-Id: I3c0e678d2da42376f3a77e334b8c5ce48460273b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-7855
Problem:
pcie A does not equal 100M when enable alone,
enable pcie A and B together works well.
Solution:
correct pcie A and B clock describetion
Verify:
test passed on tm2 ab3100
Change-Id: I9483efe00cc157c3ff5a9ff4d3a03e0dc50e4fdc
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-7676
Problem:
If we open kasan on 32bit kernel, after resume we usually will
get a stack-out-of-bounds KASAN error report. But infact that's
a fake report. Because On arm architecture, cpu suspend/resume
routine is done in function call path:
cpu_suspend -> psci_cpu_suspend -> __invoke_psci_fn_smc
during this call path, some parts of stack will be marked as
shadow memory. But when cpu resume from smc call, it directly
return to point which saved in cpu_suspend and call resume
procedure. Which do not comeback as a reverse return path:
__invoke_psci_fn_smc -> psci_cpu_suspend -> cpu_suspend
So some residual shadow memory may affect KASAN report when
cpu is calling resume hooks.
Solution:
We just need to clear all shadow in stack for this case.
Verify:
p212
Change-Id: Ic6c877212240d03902b11184e54ac363455e0094
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-2842
Problem:
when set dsu clock, it will hang up
Solution:
1.add dsu clock notify, when set rate of
dsu_fixed_sel0 clock, dsu parent should switch to
dsu_fixed_sel1 to avoid hang up.
Verify:
verify on t962x2_x301
Change-Id: I55e7a61cfb12b973f423312892700f2d08e75cbd
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-7728
Problem:
bandwidth measure on tm2 is not enabled
Solution:
Adding port description of ddr controller for tm2
Also enable dmc monitor function for tm2
Verify:
AB301
Change-Id: I0127ac04fe29723669525f6ff1161e2fa35d69ca
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-7765
Problem:
g12b revb efuse not correct
Solution:
set tx_amp with chipid to work around
Verify:
verify on g12b skt board
Change-Id: Id1babce231d866293e4de52685834834a4b65227
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#TV-4365
Problem:
USB keyboard not recognized after reboot repeatedly.
Solution:
Reset the reset_FS_LS_Clock_Divider bit of the usb phy.
Verify:
tl1
Change-Id: I0f4bf35be04d3aff1094bf55641348ccaca072e4
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-6400
Problem:
hdmirx phy clk_out is not stable,and causes long detection time
Solution:
VLSI provide a new PLL init sequence
Verify:
TL1
Change-Id: I42b98572226aafc8e61e36b6a2e5dfad078fd8fe
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#OTT-2650
Problem:
Play local video, when source window size change,
flashing occur. about two frame is not right
Solution:
There have a bug when source window size change, current
frame width was copied to post ready frame. so every
frame backup width saved in to current frame private buffer.
Verify:
TL1
Change-Id: I1b82dcfcfaeffaad6b28a7871014e12f0d157004
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-6762
Problem:
di clkb frq is not right
Solution:
change from 500 to 667
Verify:
tl1
Change-Id: I9242fec37f7527203d1d00cbcdfb79c4f09e9595
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-5664
Problem:
pcr not paused when netflix video non-tunnel mode pause
Solution:
do not compensation when diff between omxpts and pcr too large
Because when paused, continous compensation will lead diff
beween omxpts and pcr will alway inside pcr adjust threshold,
and pcr not set again, then pcr will increase
Verify:
verify by nts
Change-Id: Ib2acea35758d161d1e9db53dd6ff369ba7973351
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
