Add support for fb_dmabuf_export call, which is executed when ioctl
FBIOGET_DMABUF is called.
Change-Id: I13b753ae25d043835b1f4ffc20b5e233171d1096
Signed-off-by: Guillaume Tucker <guillaume.tucker@arm.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
(am from 61062681c9)
Commit ab8f58ad72 ("PM / devfreq: Set min/max_freq when adding the
devfreq device") initializes df->min/max_freq with the min/max OPP when
the device is added. Later commit f1d981eaec ("PM / devfreq: Use the
available min/max frequency") adds df->scaling_min/max_freq and the
following to the frequency adjustment code:
max_freq = MIN(devfreq->scaling_max_freq, devfreq->max_freq);
With the current handling of min/max_freq this is incorrect:
Even though df->max_freq is now initialized to a value != 0 user space
can still set it to 0, in this case max_freq would be 0 instead of
df->scaling_max_freq as intended. In consequence the frequency adjustment
is not performed:
if (max_freq && freq > max_freq) {
freq = max_freq;
To fix this set df->min/max freq to the min/max OPP in max/max_freq_store,
when the user passes a value of 0. This also prevents df->max_freq from
being set below the min OPP when df->min_freq is 0, and similar for
min_freq. Since it is now guaranteed that df->min/max_freq can't be 0 the
checks for this case can be removed.
Fixes: f1d981eaec ("PM / devfreq: Use the available min/max frequency")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
(cherry picked from commit df5cf4a361)
Change-Id: Ib8e2def7d3bf605dba81cf75bab89a23a39ca6f3
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Since devfreq_add_device() and update_devfreq() already takes care of this.
Change-Id: Ie90c1d28f681cfbc946362e303a61bdf3578ccd6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This is required by android hwc.
Change-Id: Ia0159b877f7d8b2bb5cecf3b352b67d9c76c7c97
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
add rk3288/rk3368/rk3399 vop area plane
Change-Id: Ia6f77353363e25423ac29129372bc510565682f8
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
The series vop of VOP_FULL framework support area plane, such as
RK3288 and RK3399, one group of area planes share same hardware,
reuse the hardware on different scanout time, this design is
useful to support mulit planes with low hardware consume.
Change-Id: Ie53211ce9ed22d03f7668637efbb7c95d9a8eb5b
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
The plane hardware is used when the display scanout run into plane active
scanout, that means we can reuse the plane hardware resources on plane
non-active scanout.
Because resource share, There are some limit on share plane: one group
of share planes need use same zpos, can't not overlap, etc.
We assume share plane is a universal plane with some limit flags.
people who use the share plane need know the limit, should call the ioctl
DRM_CLIENT_CAP_SHARE_PLANES, and judge the planes limit before use it.
Change-Id: Iecc3d8e7f1ce29d567cdbad689ba4dbad3d594e1
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
DTS hdmi phy name have to be the same with dt-binding document and
hdmi driver code.
Change-Id: Ib2142607e0792f430f05a972206e608f79a46132
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
DTS hdmi phy name have to be the same with dt-binding document and
hdmi driver code.
Change-Id: I00edde5b5745832f123b98f41a2fdb52434ce386
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
When cherry-pick from develop-4.4, inno hdmi phy config entry
was lost (commit-id: 0b56e9a7e8).
So we must add inno hdmi phy config entry again.
Change-Id: I8a17c75359869896f5f110cf268c3c2469781537
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
This change allows the user to read and edit regulator information
in user space through the debugfs file system.
Base on msm work.
Change-Id: I4b40d4fd662e3d3d0856127e8e030fa60e938df9
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Under some circumstances the Frame Composer arithmetic unit can miss
an FC register write due to being busy processing the previous one.
The issue can be worked around by issuing a TMDS software reset and
then write one of the FC registers several times. After tested, the
number of iterations of RK3399/RK3328(v2.11a), RK3368(v2.01a),
RK3288(v2.00a) is one.
Change-Id: Iba209e25d56aff84a8cc90b4d8dcb87369c9ae52
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
The macro name DWC3_DCTL_LPM_ERRATA is uninformative and does not do
masking. Remove DWC3_DCTL_LPM_ERRATA_MASK and rename
DWC3_DCTL_LPM_ERRATA to DWC3_DCTL_NYET_THRES with proper masking.
Change-Id: I74a86306c10a5d03e8d772a86f04ffe9048ad990
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 2e487d2805)
DWC3 is missing the printing of control request GET_STATUS(device)
tracepoint. This patch prints that.
Change-Id: I22b523a236a7afe913f7d7f52791f26a8a007847
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit dd24f9b604)
The setting of the dr_mode may need to check the controller's revision.
The revision is set in the dwc3_core_is_valid(), which comes after
dr_mode setting. Let's move it closer to the start of the dwc3_probe()
function and before calling dwc3_get_dr_mode().
Change-Id: I400f22c66cd03abebfed2c8791c88baafb581b39
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit b873e2d0ea)
All DWC3 controllers are LPM capable. Report that in the
usb_gadget.lpm_capable for the gadget driver to properly output the
bcdUSB value in the descriptor.
Change-Id: Ib40247fb4145a683ce84a0358eddfeb69b5a868c
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit c729969b2b)
dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
#0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
#1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
#2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
#3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
#4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
#5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<00000000>] (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14)
[<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8)
[<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8)
[<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84)
[<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54)
[<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c)
[<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588)
[<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04)
[<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc)
[<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20)
[<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160)
[<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c)
[<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c)
[<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...
Change-Id: I90fa927b1b5d428a7114d2a7a40915cf04837fbb
Fixes: 01c10880d2 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 41a91c606e)
When we read an array of integers from device properties,
the temporary buffer is allocated.
However, in case of dwc3_set_incr_burst_type() it's not freed.
Free allocated buffer immediately after use.
Change-Id: I19353b4b74fb09543a91b2927f5166cecaa9d94b
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 75ecb9dd56)
Currently req->num_trbs is not reset after the TRBs are skipped and
processed from the cancelled list. The gadget driver may reuse the
request with an invalid req->num_trbs, and DWC3 will incorrectly skip
trbs. To fix this, simply reset req->num_trbs to 0 after skipping
through all of them.
Change-Id: I3baf95ab4513f54f65ed2c79ff6bf1e0655006fc
Fixes: c3acd59014 ("usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit c7152763f0)
Since we're disabling the endpoint anyway, we don't worry about
getting endpoint command completion interrupt.
Change-Id: Ibd8b9f362b88da6bc7e60e19156dcf0a816ae42a
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit c5353b225d)
