PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/ad82584f.c
PD#SWPL-2404
Problem:
VAD for wake up
Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine
Verify:
x301
Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
MAINTAINERS
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
include/linux/amlogic/major.h
sound/soc/amlogic/auge/ddr_mngr.h
sound/soc/amlogic/auge/tdm.c
PD#SWPL-3456
Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk
Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584
Verify:
x301
Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/ad82584f.c
PD#SWPL-2767
Problem:
If DMC violation address is in highmem, then it will panic
when show memory using page_address();
Solution:
map violation address for highmem
Verify:
p212
Change-Id: Ib6213eaab42b129c8c0a381511a0b3376b0d3e66
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Conflicts:
drivers/amlogic/ddr_tool/dmc_g12.c
drivers/amlogic/ddr_tool/dmc_gx.c
PD#SH-224
Problem:
buildroot no w411 dts
Solution:
1.add w411 dts
2.w411 dts copy form w400_buildtoot dts, and do some memory cost down,
and also sdio port has some different with w400 board
Verify:
w411 board test pass
Change-Id: Iba3de4fc4fe1d37dbb6070dbe54ad35c9caf45d9
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm64/boot/dts/amlogic/mesontxl.dtsi
PD#SWPL-2613
Problem:
sr mux in vpp misc is set incorrectly.
Solution:
move the vpp misc operation together
Verify:
verify by x301
Change-Id: Ie813e5b04b97a4481c2e45bcf0c8b4c065fb9f69
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/vpp.c
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amdolby_vision/amdolby_vision.c
PD#174155: complete_ep 0xffffffc05bed2858, ep->queue empty!
Problem:
1. After adb process be killed, data buffer is freed and
this memory is allocated for the other. But the address
is hold by the controller.
2. Adbd in PC is running. So, the controller receive the
data and write to this memory.
3.The value of this memory is modified by the controller.
This could cause the memory problem.
Solution:
whenever io_data->aio equals 1, the data buffer is from a fixed array.
Verify:
verified by huang xiaojing
Change-Id: I2055ea013021c8411bf626ce170e6b32164bef4a
Signed-off-by: he.he <he.he@amlogic.com>
Conflicts:
drivers/usb/gadget/function/f_fs.c
PD#SWPL-5618
Problem:
Need to optimize the arbitration between hdcp22 and EMP
Solution:
Add the arbitration between hdcp22 and EMP
Verify:
TM2/T962E2/AB311
Change-Id: Ib910ac40754e744e36ee1349de5b2c55e2a011eb
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: If55159835daf0a87439647586526f836a226504c
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
PD#SWPL-6028
Problem:
save irqflag locally when ftrace_ramoops io
Solution:
save irqflag locally when ftrace_ramoops io
Verify:
TL1 x301
Change-Id: I6df9700cceaccc97dc983d88ada73197a6968f73
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#OTT-2068
Problem:
When playing 1280x128 video under normal screen mode, the aspect ratio from
decodec is not accurate enough by multipling 0x100. (128x256/1280=25.6).
Dropping 0.6 will cause height losing 9 lines.
Solution:
Using new interface to pass real ar width and height following steps:
1.Set old ar variable to 0x3ff as a trigger flag.
2.set the original ar value into sar_width and sar_height of vframe
Verify:
verified on franklin
Change-Id: I8a794edd968a76f198ee9cb168a7cfb858c858f8
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: Ia121e57ad69c5b0d211e14bf3a61f165457e54c7
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high
frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high
freq when running particle
Change-Id: Ifcb286cd37faa9f618b48ab515ca360aba563a34
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high freq when running particle
Change-Id: Ie10335d1f3a043d4418245d31efa8b42077031a9
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
PD#SWPL-7197
Problem:
There is not detail calculation process for i2c duty cycle
Solution:
add detail calculation process for i2c duty cycle
Verify:
verified on x301
Change-Id: Ifc222acda3268f792f63e84c6dc3513d80568e19
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-5475
Problem:
need to add interface of HDR Prime SL driver
Solution:
add interface of HDR Prime SL driver
Verify:
U212
Change-Id: If0e62b74ccbaa4ede490e7a9896d9f5915480d6f
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-6937
Problem:
1.get lefttime error by 'cat sys/class/watchdog/watchdog0/timeleft' cmd.
2.if DTS is configured to feed watchdog by Android, the system will
restart automatically after wake up.
Solution:
1.modify the code to get time.
2.when the system wakes up, first judge whether the watchdog runs,
and then decide whether to start the watchdog.
Verify:
test pass on u200
Change-Id: If64888ffdd5651e8cfcace5ea0d0da31641bb397
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#OTT-2524
Problem:
enable sdr2hdr function, uboot logo have color change
Solution:
match uboot sdr2hdr function
Verify:
verify on G12A
Change-Id: I160cd6141d09a385d299ca96a89eb1ebf09c86e8
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-7326
Problem:
slab-out-of-bounds in strlen called by name_store
Solution:
Make sure the string passed to strlen is always '\0'
ended
Verify:
Locally
Change-Id: Ifd78a100c0e34ff9afb527ebe7b044ceb5c3505e
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-5038
Problem:
image will block when pts discontinue
Solution:
do not show the frame when pts greater than pcr
Verify:
tested on Marconi
Change-Id: I57ea973b7fdcdc7cded2c5c9b681be29f0a31a4b
Signed-off-by: peter wang <peter.wang@amlogic.com>
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: Ibaba2dcb7a3e8715243f5a93d69a1bf96e8c49a7
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
PD#SWPL-7085
Problem:
Currently kasan can't be used on 32bit kernel, it's difficult to debug
memory problems;
Solution:
Bring up KASAN on 32bit kernel
Verify:
p212
Change-Id: I4d80568f023315994e969c79b786eba856177c9c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-7262
Problem:
dnlp iRgnBgn and iRgnEnd not load db value
Solution:
add refresh of iRgnBgn and iRgnEnd.
Verify:
on x301
Change-Id: I81ae91490a7fd2899eefd4f800948851ebbf21e7
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#OTT-3244
Problem:
When vd layer state is on_pending, calling enable videolayer
function will overwrite the state. Then it will not enable video
layer really.
Solution:
Add the judgement to check if the state is on_pending.
Verify:
verified on W400
Change-Id: I0513a6610fdb108bec05858c7f6c7976be5e7edb
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#TV-4213
Problem:
can't wake up by gpio/adc key when suspend into freeze mode
Solution:
not suspend gpio/adc when freeze
Verify:
X301
Change-Id: I32ff27aafebe35d8deb6e9b4d3daee686bbf90bc
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
PD#TV-3541
Problem:
1.only vmalloc 4KB at first.
2.if user space need more memory, try to allocate a new vmalloc
range with large size and move all related data to new place.
3.the first 4KB is not free when release this binder.
Solution:
free the first 4KB when release binder.
Verify:
R311
Change-Id: I4429de04a260671e4626b77ec340e47e436d5c8d
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
PD#SWPL-6028
Problem:
improve ftrace_ramoops to debug bus hang
Solution:
1. in uboot
setenv initargs $initargs ramoops_io_en=1 loglevel=3;save;reset
2. in linux command line:
cat /sys/module/kernel/parameters/ramoops_io_en
to check if success.
3. after watchdog reboot, get trace data with:
cat /sys/fs/pstore/ftrace-ramoops-0
Verify:
TL1 x301
Change-Id: If1a2582b40a3ded31eedef5355eb0b8a5bf495c3
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-6969
Problem:
For some historical reason, aml-uart is configured as the earlycon
name in uboot, which is not recognized by 4.9 kernel
Solution:
support aml-uart as the name for earlycon
Verify:
Ampere
Change-Id: I53463ac6d27ff3e911aa675cd5d10d6cbf26ba05
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#TV-4274
Problem:
fix audio config (PAL_M, NTSC_M) when video is PAL.
Solution:
fix audio config (PAL_M, NTSC_M) when video is PAL
Verify:
verified by x301.
Change-Id: I9be8d71d52a226b6422317be0b77ca6331f23147
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
