Add the dt-bindings header for the rk3308, that gets shared between
the clock controller and the clock references in the dts.
Change-Id: I9c6ea1228417f07603d89f810726e9cdffd2a10a
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This driver is modified to support RK3228 SoC.
RK3228 SoC is only support idle.
Change-Id: I1c3e942de13fd241e3893818e2584c25bad69b27
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling dmcfreq on the rk3328
Change-Id: If4cff5cc372f80b6776a7272a1bff54abef2cf33
Signed-off-by: CanYang He <hcy@rock-chips.com>
This driver is modified to support PX30 SoC.
Change-Id: I0226327d6d63302627a823bf73a5f8239b70adaf
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Add the dt-bindings header for the px30, that gets shared between
the clock controller and the clock references in the dts.
Add softreset ID for px30.
Change-Id: I643f5e40cf77fb5c3aeb41392172da79194d54c1
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (510 commits)
Linux 4.4.103
Revert "sctp: do not peel off an assoc from one netns to another one"
xen: xenbus driver must not accept invalid transaction ids
s390/kbuild: enable modversions for symbols exported from asm
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: rsnd: don't double free kctrl
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
spi: SPI_FSL_DSPI should depend on HAS_DMA
staging: iio: cdc: fix improper return value
iio: light: fix improper return value
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
mac80211: Remove invalid flag operations in mesh TSF synchronization
drm: Apply range restriction after color adjustment when allocation
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
ath10k: set CTS protection VDEV param only if VDEV is up
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: ignore configuring the incorrect board_id
ath10k: fix incorrect txpower set by P2P_DEVICE interface
...
Conflicts:
drivers/media/v4l2-core/v4l2-ctrls.c
kernel/sched/fair.c
Change-Id: I48152b2a0ab1f9f07e1da7823119b94f9b9e1751
The rk3036 SoCs have some domains with NOC idle function, but it can't
turn the power domain off. This patch supports it to handle some devices
for needing.
Change-Id: I515f2cea07f1af1777bb877a5f396fd21caba3ad
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
[ Upstream commit d97556c801 ]
We need to also have OFFPULLUDENABLE bit set to use the off mode pull values.
Otherwise the line is pulled down internally if no external pull exists.
This is has some documentation at:
http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration
Note that the value is still glitchy during off mode transitions as documented
in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of
relying on the internal ones for off mode and even then anything pulled up
will get driven down momentarily on off mode restore for GPIO banks other
than bank1.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the SCLK_I2S_PRE and SCLK_I2S_FRAC id for i2s sclk.
Change-Id: Ic66291f2a76ec5c2a47e9721ad6f37922264fd42
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
According to a description from TRM, add all the power domains.
Change-Id: Id21e1b51825f7cc94e194e164583ed2584743104
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The clock hevc core will be used to drive the hevc decoder.
Change-Id: Ic1298ce1edd07f86e5c243e3a2c9876481f4cba9
Signed-off-by: Randy Li <randy.li@rock-chips.com>
This adds the necessary data for handling dmcfreq on the rk3128.
Change-Id: I6aeae7103c1eaed0b4515d8d11863c4b190b6918
Signed-off-by: Liang Chen <cl@rock-chips.com>
Add dfi and dmc nodes in the device tree for the ARM rk3288 SoC.
To support ddr frequency scaling function, we need enable dmc and
dfi nodes.
Change-Id: Ib796c08c694e74e0da3319d2797e95aecf3e7e73
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
This makes dmc driver possible to register a system status notifier and
other drivers possible to call the notifier call-back easily, so that
the dmc driver can change frequency according to different system status.
Change-Id: I1a4fb4649366d75310d2e29f87775bb2d9ca3d67
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This patch exports sdio src clock for dts reference.
Change-Id: I3e83cce4da3d82af4b18df43ecd51c504d308c02
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Add the dt-bindings header for the rk3128,
that gets shared between the clock controller and
the clock references in the dts.
Add softreset ID for rk3128.
And it also applies to the RK3126 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from git.kernel.org mmind/linux-rockchip.git v4.13-clk/next
commit b20841b9e0)
Change-Id: I70c055570319abe4547ac2a42b9139c7248abb13
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The DP83867 has a muxing option for the CLK_OUT pin. It is possible
to set CLK_OUT for different channels.
Create a binding to select a specific clock for CLK_OUT pin.
Change-Id: I416afa8ef29d9a684068fa880f99ca7b720cfd14
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
