HW can provide 1.6V micbias level as well the existing levels
already provided in the driver. This patch adds support for 1.6V
to the DT binding.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 0aed64c176)
Change-Id: I714fb76154242aa6392143ebe8db20a7510b45a3
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
In AB silicon, the internal LDO is not supported so remove
DT and driver references to this (digital voltage direct from
'VDD' supply)
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit d8ef140dcc)
Change-Id: I540c28a7dd0994c5dd94889c2cc0f566f8fddb63
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
commit f75d48644c upstream.
__clear_bit_unlock() is a special little snowflake. While it carries the
non-atomic '__' prefix, it is specifically documented to pair with
test_and_set_bit() and therefore should be 'somewhat' atomic.
Therefore the generic implementation of __clear_bit_unlock() cannot use
the fully non-atomic __clear_bit() as a default.
If an arch is able to do better; is must provide an implementation of
__clear_bit_unlock() itself.
Specifically, this came up as a result of hackbench livelock'ing in
slab_lock() on ARC with SMP + SLUB + !LLSC.
The issue was incorrect pairing of atomic ops.
slab_lock() -> bit_spin_lock() -> test_and_set_bit()
slab_unlock() -> __bit_spin_unlock() -> __clear_bit()
The non serializing __clear_bit() was getting "lost"
80543b8e: ld_s r2,[r13,0] <--- (A) Finds PG_locked is set
80543b90: or r3,r2,1 <--- (B) other core unlocks right here
80543b94: st_s r3,[r13,0] <--- (C) sets PG_locked (overwrites unlock)
Fixes ARC STAR 9000817404 (and probably more).
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160309114054.GJ6356@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3debb0a9dd upstream.
The trace_printk() code will allocate extra buffers if the compile detects
that a trace_printk() is used. To do this, the format of the trace_printk()
is saved to the __trace_printk_fmt section, and if that section is bigger
than zero, the buffers are allocated (along with a message that this has
happened).
If trace_printk() uses a format that is not a constant, and thus something
not guaranteed to be around when the print happens, the compiler optimizes
the fmt out, as it is not used, and the __trace_printk_fmt section is not
filled. This means the kernel will not allocate the special buffers needed
for the trace_printk() and the trace_printk() will not write anything to the
tracing buffer.
Adding a "__used" to the variable in the __trace_printk_fmt section will
keep it around, even though it is set to NULL. This will keep the string
from being printed in the debugfs/tracing/printk_formats section as it is
not needed.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 07d777fe8c "tracing: Add percpu buffers for trace_printk()"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 378c6520e7 upstream.
This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:
- The fs.suid_dumpable sysctl is set to 2.
- The kernel.core_pattern sysctl's value starts with "/". (Systems
where kernel.core_pattern starts with "|/" are not affected.)
- Unprivileged user namespace creation is permitted. (This is
true on Linux >=3.8, but some distributions disallow it by
default using a distro patch.)
Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.
To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b021cbf3c upstream.
Before 2e91fa7f6d ("cgroup: keep zombies associated with their
original cgroups"), all dead tasks were associated with init_css_set.
If a zombie task is requested for migration, while migration prep
operations would still be performed on init_css_set, the actual
migration would ignore zombie tasks. As init_css_set is always valid,
this worked fine.
However, after 2e91fa7f6d, zombie tasks stay with the css_set it was
associated with at the time of death. Let's say a task T associated
with cgroup A on hierarchy H-1 and cgroup B on hiearchy H-2. After T
becomes a zombie, it would still remain associated with A and B. If A
only contains zombie tasks, it can be removed. On removal, A gets
marked offline but stays pinned until all zombies are drained. At
this point, if migration is initiated on T to a cgroup C on hierarchy
H-2, migration path would try to prepare T's css_set for migration and
trigger the following.
WARNING: CPU: 0 PID: 1576 at kernel/cgroup.c:474 cgroup_get+0x121/0x160()
CPU: 0 PID: 1576 Comm: bash Not tainted 4.4.0-work+ #289
...
Call Trace:
[<ffffffff8127e63c>] dump_stack+0x4e/0x82
[<ffffffff810445e8>] warn_slowpath_common+0x78/0xb0
[<ffffffff810446d5>] warn_slowpath_null+0x15/0x20
[<ffffffff810c33e1>] cgroup_get+0x121/0x160
[<ffffffff810c349b>] link_css_set+0x7b/0x90
[<ffffffff810c4fbc>] find_css_set+0x3bc/0x5e0
[<ffffffff810c5269>] cgroup_migrate_prepare_dst+0x89/0x1f0
[<ffffffff810c7547>] cgroup_attach_task+0x157/0x230
[<ffffffff810c7a17>] __cgroup_procs_write+0x2b7/0x470
[<ffffffff810c7bdc>] cgroup_tasks_write+0xc/0x10
[<ffffffff810c4790>] cgroup_file_write+0x30/0x1b0
[<ffffffff811c68fc>] kernfs_fop_write+0x13c/0x180
[<ffffffff81151673>] __vfs_write+0x23/0xe0
[<ffffffff81152494>] vfs_write+0xa4/0x1a0
[<ffffffff811532d4>] SyS_write+0x44/0xa0
[<ffffffff814af2d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
It doesn't make sense to prepare migration for css_sets pointing to
dead cgroups as they are guaranteed to contain only zombies which are
ignored later during migration. This patch makes cgroup destruction
path mark all affected css_sets as dead and updates the migration path
to ignore them during preparation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 2e91fa7f6d ("cgroup: keep zombies associated with their original cgroups")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f33798deec upstream.
commit 9ce119f318 ("tty: Fix GPF in flush_to_ldisc()") fixed a
GPF caused by a line discipline which does not define a receive_buf()
method.
However, the vt driver (and speakup driver also) pushes selection
data directly to the line discipline receive_buf() method via
tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b84106b4e2 upstream.
The PCI config header (first 64 bytes of each device's config space) is
defined by the PCI spec so generic software can identify the device and
manage its usage of I/O, memory, and IRQ resources.
Some non-spec-compliant devices put registers other than BARs where the
BARs should be. When the PCI core sizes these "BARs", the reads and writes
it does may have unwanted side effects, and the "BAR" may appear to
describe non-sensical address space.
Add a flag bit to mark non-compliant devices so we don't touch their BARs.
Turn off IO/MEM decoding to prevent the devices from consuming address
space, since we can't read the BARs to find out what that address space
would be.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81ad4276b5 upstream.
In some cases, platform thermal driver may report invalid trip points,
thermal core should not take any action for these trip points.
This fixed a regression that bogus trip point starts to screw up thermal
control on some Lenovo laptops, after
commit bb431ba26c
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Oct 30 16:31:47 2015 +0800
Thermal: initialize thermal zone device correctly
After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().
Both thermal core framework and step_wise governor is
enhanced to handle this. And since the step_wise governor
is the only one that uses trends, so it's the only thermal
governor that needs to be updated.
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: szegad <szegadlo@poczta.onet.pl>
Tested-by: prash <prash.n.rao@gmail.com>
Tested-by: amish <ammdispose-arch@yahoo.com>
Tested-by: Matthias <morpheusxyz123@yahoo.de>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a1a74381 upstream.
ARM64 allmodconfig produces a bunch of warnings when building the
samsung ASoC code:
sound/soc/samsung/dmaengine.c: In function 'samsung_asoc_init_dma_data':
sound/soc/samsung/dmaengine.c:53:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
playback_data->filter_data = (void *)playback->channel;
sound/soc/samsung/dmaengine.c:60:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
capture_data->filter_data = (void *)capture->channel;
We could easily shut up the warning by adding an intermediate cast,
but there is a bigger underlying problem: The use of IORESOURCE_DMA
to pass data from platform code to device drivers is dubious to start
with, as what we really want is a pointer that can be passed into
a filter function.
Note that on s3c64xx, the pl08x DMA data is already a pointer, but
gets cast to resource_size_t so we can pass it as a resource, and it
then gets converted back to a pointer. In contrast, the data we pass
for s3c24xx is an index into a device specific table, and we artificially
convert that into a pointer for the filter function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the obsolete field ctrl_class with "which".
Make sure it not used in future modules by commenting out the field with
ifndef __KERNEL_ .
The field cannot be simply removed because that would be change on the
kenel API to the userspace (and we don't like that).
Change-Id: I21bfb7c2a4b553e74765213fd99c381d8b609cc0
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
(cherry picked from commit 0f8017bebf)
So it can be used to get the default value of a control.
Without this change it is not possible to get the
default value of array controls.
Change-Id: I4370b7f2a40a08f28648f8dcaa3d84405db12523
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
(cherry picked from commit 35ec2a2fa5)
These ioctls can be used to synchronize CPU/GPU access to a buffer.
BUG=chrome-os-partner:33438
TEST=add CONFIG_DRM_DMA_SYNC=y, in conjunction with xf86-video-armsoc change,\
run any X application, like xev
Change-Id: I8065ec465ebd0cb6abe128a3e7d92a8f74a88928
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229441
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c
drivers/gpu/drm/rockchip/rockchip_drm_drv.h
drivers/gpu/drm/rockchip/rockchip_drm_gem.c
(cherry picked from cros/chromeos-3.14 commit a847e1f492cbd186116c01a3f56575320dc87152)
Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Rockchip Socs have GPU, we need allocate GPU accelerated buffers.
So add special ioctls GEM_CREATE/GEM_MAP_OFFSET to support
accelerated buffers.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
BUG=chromium:399935
TEST=With rest of patch set, can boot to UI on eDP
Change-Id: Ia4b13798aac97d16214da7a75a2479e6e334313e
Reviewed-on: https://chromium-review.googlesource.com/222153
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Commit-Queue: Daniel Kurtz <djkurtz@chromium.org>
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c
(cherry picked from cros/chromeos-3.14 commit c29c5a3037e18815937d8af664738e499ada94d1)
Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
power-supply and clock source for an OPP.
The OPP is found by matching against the target_freq passed to the
routine. This shall replace similar code present in most of the OPP
users and help simplify them a lot.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 6a0712f6f1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This allows the OPP core to request/free the regulator resource,
attached to a device OPP. The regulator device is fetched using the name
provided by the driver, while calling: dev_pm_opp_set_regulator().
This will work for both OPP-v1 and v2 bindings.
This is a preliminary step for moving the OPP switching logic into the
OPP core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 9f8ea969d5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
OPP bindings (for few properties) allow a platform to choose a
value/range among a set of available options. The options are present as
opp-<prop>-<name>, where the platform needs to supply the <name> string.
The OPP properties which allow such an option are: opp-microvolt and
opp-microamp.
Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_prop_name() APIs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 01fb4d3c39)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
OPP bindings allow a platform to enable OPPs based on the version of the
hardware they are used for.
Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_supported_hw() APIs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 7de36b0aa5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
CONFIG_SDCARD_FS_CI_SEARCH only guards a define for
LOOKUP_CASE_INSENSITIVE, which is never used in the
kernel. Remove both, along with the option matching
that supports it.
Change-Id: I363a8f31de8ee7a7a934d75300cc9ba8176e2edf
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Attempts to build sdcardfs as module fail with
fs/sdcardfs/lookup.c: In function '__sdcardfs_lookup':
fs/sdcardfs/lookup.c:243:5: error: 'LOOKUP_CASE_INSENSITIVE' undeclared
This occurs because the define is enclosed with #ifdef
CONFIG_SDCARD_FS_CI_SEARCH. If SDCARD_FS_CI_SEARCH is configured to be
built as module, this does not work. Alternatives would be to use #if
IS_ENABLED(CONFIG_SDCARD_FS_CI_SEARCH), or to declare SDCARD_FS_CI_SEARCH
as bool, but that does not work because the define is used unconditionally
in the source.
Note that LOOKUP_CASE_INSENSITIVE is only set but not evaluated in the
current source code, so setting the flag has no real effect.
Fixes: 84a1b7d3d3 ("Included sdcardfs source code for kernel 3.0")
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Inotify does not currently know when a filesystem
is acting as a wrapper around another fs. This means
that inotify watchers will miss any modifications to
the base file, as well as any made in a separate
stacked fs that points to the same file.
d_canonical_path solves this problem by allowing the fs
to map a dentry to a path in the lower fs. Inotify
can use it to find the appropriate place to watch to
be informed of all changes to a file.
Change-Id: I09563baffad1711a045e45c1bd0bd8713c2cc0b6
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Only included the source code as is for kernel 3.0. Following patches
take care of porting this file system to version 3.10.
Change-Id: I09e76db77cd98a059053ba5b6fd88572a4b75b5b
Signed-off-by: Daniel Campello <campello@google.com>
(cherry picked from commit https://lkml.org/lkml/2016/2/4/831)
d07e22597d ("mm: mmap: add new /proc tunable for mmap_base ASLR")
added the ability to choose from a range of values to use for entropy
count in generating the random offset to the mmap_base address. The
maximum value on this range was set to 32 bits for 64-bit x86 systems, but
this value could be increased further, requiring more than the 32 bits of
randomness provided by get_random_int(), as is already possible for arm64.
Add a new function: get_random_long() which more naturally fits with the
mmap usage of get_random_int() but operates exactly the same as
get_random_int().
Also, fix the shifting constant in mmap_rnd() to be an unsigned long so
that values greater than 31 bits generate an appropriate mask without
overflow. This is especially important on x86, as its shift instruction
uses a 5-bit mask for the shift operand, which meant that any value for
mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base
randomization.
Finally, replace calls to get_random_int() with get_random_long() where
appropriate.
Bug: 26963541
Signed-off-by: Daniel Cashman <dcashman@android.com>
Signed-off-by: Daniel Cashman <dcashman@google.com>
Change-Id: I5b45621088666d5d1dfbf43952f25ea0798b10ba
The API to log the suspend reason was introduced with commit 57caa2ad5c
("power: Adds functionality to log the last suspend abort reason.").
It is called from functions enabled with PM_SLEEP and from functions
enabled with SUSPEND, but only available if SUSPEND is enabled.
This can result in build failures such as the following if PM_SLEEP
is enabled, but SUSPEND is not.
kernel/built-in.o: In function `try_to_freeze_tasks':
process.c:(.text+0x30928): undefined reference to `log_suspend_abort_reason'
drivers/built-in.o: In function `syscore_suspend':
(.text+0x6e250): undefined reference to `log_suspend_abort_reason'
drivers/built-in.o: In function `__device_suspend':
main.c:(.text+0x7a528): undefined reference to `log_suspend_abort_reason'
Fixes: 57caa2ad5c ("power: Adds functionality to log the last suspend abort reason.")
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Commit 1af89c1ef3 ("Hack: net: PPPoPNS and PPPoLAC build fixes for 4.1")
fixed the build for PPPoPNS and PPPoLAC by re-introducing a field in
struct msghdr which was removed upstream. Re-introducing the field doesn't
get it used, so it is quite likely that the code never worked. Fix it up for
good.
Fixes: 1af89c1ef3 ("Hack: net: PPPoPNS and PPPoLAC build fixes for 4.1")
Signed-off-by: Guenter Roeck <groeck@chromium.org>
This implements SOCK_DESTROY for TCP sockets. It causes all
blocking calls on the socket to fail fast with ECONNABORTED and
causes a protocol close of the socket. It informs the other end
of the connection by sending a RST, i.e., initiating a TCP ABORT
as per RFC 793. ECONNABORTED was chosen for consistency with
FreeBSD.
[cherry-pick of net-next c1e64e298b]
Change-Id: I728a01ef03f2ccfb9016a3f3051ef00975980e49
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This passes the SOCK_DESTROY operation to the underlying protocol
diag handler, or returns -EOPNOTSUPP if that handler does not
define a destroy operation.
Most of this patch is just renaming functions. This is not
strictly necessary, but it would be fairly counterintuitive to
have the code to destroy inet sockets be in a function whose name
starts with inet_diag_get.
[backport of net-next 6eb5d2e08f]
Change-Id: Idc13a7def20f492a5323ad2f8de105426293bd37
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a SOCK_DESTROY operation, a destroy function
pointer to sock_diag_handler, and a diag_destroy function
pointer. It does not include any implementation code.
[backport of net-next 64be0aed59]
Change-Id: Ic5327ff14b39dd268083ee4c1dc2c934b2820df5
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, inet_diag_dump_one_icsk finds a socket and then dumps
its information to userspace. Split it into a part that finds the
socket and a part that dumps the information.
[cherry-pick of net-next b613f56ec9]
Change-Id: I144765afb6ff1cd66eb4757c9418112fb0b08a6f
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thoes file were introduced by Commit bdafdac384
(rk3288 chromium: drm grafic fb support for x11 mali gpu), for now we have the
mainline rockchip drm code, no need those old head files, let's removed them.
Change-Id: I325a5b7981ac5478349f276f8811b1b51e40c564
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
In current of-thermal, the .set_trip_temp only support to
set trip_temp for SW. But some sensors support to set
trip_temp on hardware, so that can trigger interrupt,
shutdown or any other events.
This patch adds .set_trip_temp() callback in
thermal_zone_of_device_ops{}, so that the sensor device can
use it to set trip_temp on hardware.
Change-Id: I879ea144a9ac21a5032dd885118887b4942c96cf
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(cherry picked from git.kernel.org next/linux-next.git master
commit 60f9ce3ada53498409d51da06502392884933f89)
Add resource managed version of thermal_zone_of_sensor_register() and
thermal_zone_of_sensor_unregister().
This helps in reducing the code size in error path, remove of
driver remove callbacks and making proper sequence for deallocations.
Change-Id: Ie2e47805f398ff7b4f1dcc71e0581221d79ba9d2
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(cherry picked from git.kernel.org next/linux-next.git master
commit e498b4984d)
