[ Upstream commit 72fbf05149bd451e7222c2ed1e3823972f19df9c ]
The Snapdragon 720G (sm7125) is software-wise very similar to the
Snapdragon 7c with minor differences in clock speeds and as added here,
it uses the Kryo 465 instead of Kryo 468.
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824091737.75813-4-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 092febd32a99 ("arm64: dts: qcom: sc7180: fix psci power domain node names")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8715c91a836502929c637c76a26335ede8818acf ]
TCON0 seems to need a different clock parent depending on output type.
For RGB it has to be PLL-VIDEO0-2X, while for DSI it has to be PLL-MIPI,
so select it explicitly.
Video output doesn't work if incorrect clock is assigned.
On my Pinebook I manually configured PLL-VIDEO0-2X and PLL-MIPI to the same
rate, and while video output works fine with PLL-VIDEO0-2X, it doesn't
work at all (as in no picture) with PLL-MIPI.
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-4-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d9e5965df04c0adf260c3009c55d5fe240f7286 ]
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V.
This property will stop the LDO regulator from switching to 1.8V when the
MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the
SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA10 is used as GPIO to enable the power switch controlling
USB Vbus for the USB Host. The change is needed to fix the PA10 voltage
level to 3.3V instead of 1.8V.
Fixes: 5d4c3cfb63 ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241119160107.598411-3-cristian.birsan@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a7f1848d9d65a4deb366726ff8f33c9c64ac43b ]
On board the sdmmc0 interface is wired to a SD Card socket.
According with mmc-controller bindings, the mmc-ddr-3_3v property
is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
Remove the mmc-ddr-3_3v property from sdmmc0 node.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20231204072537.2991-1-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Stable-dep-of: 4d9e5965df04 ("ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe15631117f8d85b1bc4e0c3b434c78be483a43d ]
In order to support multiple revisions of the sa8775p-ride board, create
a .dtsi containing the common parts and split out the ethernet bits into
the actual board file as they will change in revision 3.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240627114212.25400-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 30f7dfd2c489 ("arm64: dts: qcom: sa8775p: Update sleep_clk frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454557d0032d088b4f467f0c541f98edb01fe431 ]
There's an irq hooked up, so let's describe it.
Prior to commit 9757300d27
("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets")
one would not see the IRQ fire, despite some (invasive) debugging
showing that the GPIO was in fact asserted, resulting in the interface
staying down.
Now that the IRQ is properly routed we can describe it.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230817213815.638189-3-ahalaney@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 30f7dfd2c489 ("arm64: dts: qcom: sa8775p: Update sleep_clk frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ff6569b0ffe7a2e311104cb3cd841983e484ac9 ]
There's an irq hooked up, so let's describe it.
Prior to commit 9757300d27
("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets")
one would not see the IRQ fire, despite some (invasive) debugging
showing that the GPIO was in fact asserted, resulting in the interface
staying down.
Now that the IRQ is properly routed we can describe it.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230817213815.638189-2-ahalaney@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 30f7dfd2c489 ("arm64: dts: qcom: sa8775p: Update sleep_clk frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9784e5cde1f9fb83661a70e580e381ae1264d12 ]
As of_find_node_by_name() release the reference of the argument device
node, tegra_emc_find_node_by_ram_code() releases some device nodes while
still in use, resulting in possible UAFs. According to the bindings and
the in-tree DTS files, the "emc-tables" node is always device's child
node with the property "nvidia,use-ram-code", and the "lpddr2" node is a
child of the "emc-tables" node. Thus utilize the
for_each_child_of_node() macro and of_get_child_by_name() instead of
of_find_node_by_name() to simplify the code.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 96e5da7c84 ("memory: tegra: Introduce Tegra20 EMC driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241217091434.1993597-1-joe@pf.is.s.u-tokyo.ac.jp
Link: https://lore.kernel.org/r/20241218024415.2494267-3-joe@pf.is.s.u-tokyo.ac.jp
[krzysztof: applied v1, adjust the commit msg to incorporate v2 parts]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479b8227ffc433929ba49200182b6383569f9615 ]
Swap USART3 and UART8 aliases on STM32MP15xx DHCOM SoM,
make sure UART8 is listed first, USART3 second, because
the UART8 is labeled as UART2 on the SoM pinout, while
USART3 is labeled as UART3 on the SoM pinout.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73317d327123472cb70e9ecbe050310f1d235e93 ]
Deduplicate /aliases { serialN = ... } and /chosen node into
stm32mp15xx-dhcom-som.dtsi , since the content is identical
on all carrier boards using the STM32MP15xx DHCOM SoM. No
functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 479b8227ffc4 ("ARM: dts: stm32: Swap USART3 and UART8 alias on STM32MP15xx DHCOM SoM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d7fdd8e38aafd4858935df2392762c1ab8fb40f ]
The MAC reset for PCIe port 1 on MT8195 when asserted during suspend
causes the system to hang during resume with the following error (with
no_console_suspend enabled):
mtk-pcie-gen3 112f8000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f8000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x24 returns -110
mtk-pcie-gen3 112f8000.pcie: PM: failed to resume noirq: error -110
This issue is specific to MT8195. On MT8192 with the PCIe reset,
MT8192_INFRA_RST4_PCIE_TOP_SWRST, added to the DT node, the issue is not
observed.
Since without the reset, the PCIe controller and WiFi card connected to
it, work just as well, remove the reset to allow the system to suspend
and resume properly.
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20241218-mt8195-pcie1-reset-suspend-fix-v1-1-1c021dda42a6@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3cbf68c69611188cd304229e346bffdabfd4277 ]
As comment of device_add() says, if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count.
Add a put_device() call before returning from the function to decrement
reference count for cleanup.
Found by code review.
Fixes: c8e4c23976 ("RDMA/srp: Rework the srp_add_port() error path")
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Link: https://patch.msgid.link/20241217075538.2909996-1-make_ruc2021@163.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6482718086bf69f9616d0b86d03514b17afaeb08 ]
Previously rxe_{dbg,info,err}() macros are appended built-in newline,
but some users will add redundant newline sometimes. So remove the
built-in newline for these macros.
In terms of rxe_{dbg,info,err}_xxx() macros, because they don't have
built-in newline, append newline when using them.
CC: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240109083253.3629967-1-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: db03b70969aa ("RDMA/rxe: Fix mismatched max_msg_sz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62a40a0d5634834790f7166ab592be247390d857 ]
The ahb reset is deasserted in probe before first register access, while the
stmmacheth-ocp reset needs to be asserted every time before changing the phy
mode in Arria10[1].
Changed in Upstream to "ahb"(331085a423 arm64: dts: socfpga: change the
reset-name of "stmmaceth-ocp" to "ahb" ).This change was intended for arm64
socfpga and it is not applicable to Arria10.
Further with STMMAC-SELFTEST Driver enabled, ethtool test also FAILS.
$ ethtool -t eth0
[ 322.946709] socfpga-dwmac ff800000.ethernet eth0: entered promiscuous mode
[ 323.374558] socfpga-dwmac ff800000.ethernet eth0: left promiscuous mode
The test result is FAIL
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -110
3. MMC Counters -110
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC -110
7. MC Filter -110
8. UC Filter 0
9. Flow Control -110
10. RSS -95
11. VLAN Filtering -95
12. VLAN Filtering (perf) -95
13. Double VLAN Filter -95
14. Double VLAN Filter (perf) -95
15. Flexible RX Parser -95
16. SA Insertion (desc) -95
17. SA Replacement (desc) -95
18. SA Insertion (reg) -95
19. SA Replacement (reg) -95
20. VLAN TX Insertion -95
21. SVLAN TX Insertion -95
22. L3 DA Filtering -95
23. L3 SA Filtering -95
24. L4 DA TCP Filtering -95
25. L4 SA TCP Filtering -95
26. L4 DA UDP Filtering -95
27. L4 SA UDP Filtering -95
28. ARP Offload -95
29. Jumbo Frame -110
30. Multichannel Jumbo -95
31. Split Header -95
32. TBS (ETF Scheduler) -95
[ 324.881327] socfpga-dwmac ff800000.ethernet eth0: Link is Down
[ 327.995360] socfpga-dwmac ff800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Link:[1] https://www.intel.com/content/www/us/en/docs/programmable/683711/21-2/functional-description-of-the-emac.html
Fixes: 331085a423 ("arm64: dts: socfpga: change the reset-name of "stmmaceth-ocp" to "ahb")
Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
