PD#OTT-2650
Problem:
Play local video, when source window size change,
flashing occur. about two frame is not right
Solution:
There have a bug when source window size change, current
frame width was copied to post ready frame. so every
frame backup width saved in to current frame private buffer.
Verify:
TL1
Change-Id: I1b82dcfcfaeffaad6b28a7871014e12f0d157004
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-6762
Problem:
di clkb frq is not right
Solution:
change from 500 to 667
Verify:
tl1
Change-Id: I9242fec37f7527203d1d00cbcdfb79c4f09e9595
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-5664
Problem:
pcr not paused when netflix video non-tunnel mode pause
Solution:
do not compensation when diff between omxpts and pcr too large
Because when paused, continous compensation will lead diff
beween omxpts and pcr will alway inside pcr adjust threshold,
and pcr not set again, then pcr will increase
Verify:
verify by nts
Change-Id: Ib2acea35758d161d1e9db53dd6ff369ba7973351
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-7051
Problem:
reduce power consumption
Solution:
add control of clk
Verify:
Verified on g12b-w400
Change-Id: I8001db369f5e0146459cdbad262017581116a0b9
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-7711
Problem:
echo l > /proc/sysrq-trigger leading to kernel crash and
lockup
Solution:
temporarily disable showing stacks of active CPUs
Verify:
U200
Change-Id: Id7f19425d754d9249b3999189dd257f8b30bae2d
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#TV-5140
Problem:
when play some ts stream , the video will hold all the time
Solution:
when the pcr is invalid ,use apts or vpts as system
time and enable the system time up funciton
Verify:
x301
Change-Id: Iec01434ab305be1ea32e03549edd8521a8c4620d
Signed-off-by: live.li <live.li@amlogic.com>
PD#SWPL-7720
Problem:
There is no audio output on HDMI on RDK platforms
Solution:
Include samesource_srcpll to g12a_s905x2_u212_drm_buildroot.dts as
g12a_s905x2_u212_buildroot.dts
Verify:
RDK/u212
Change-Id: I663aaca2e77a3a555be7d1baea28530886c50464
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
PD#SWPL-5618
Problem:
Need to optimize the arbitration between hdcp22 and EMP
Solution:
Add the arbitration between hdcp22 and EMP
Verify:
TM2/T962E2/AB311
Change-Id: Ib910ac40754e744e36ee1349de5b2c55e2a011eb
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-4130
Problem:
No ir learning function in current source code
Solution:
Provide two ways to use ir learning function
1. sysfs
/*start learning*/
echo 1 > /sys/class/remote/amremote/ir_learnning
/*get data*/
cat /sys/class/remote/amremote/learned_pulse
/*stop learning*/
echo 0 > /sys/class/remote/amremote/ir_learnning
2. ioctl
/*start/stop learnning 1/0*/
REMOTE_IOC_SET_IR_LEARING
/*get raw data*/
REMOTE_IOC_GET_RAW_DATA
Verify:
U200 and W400
Change-Id: Ibb03838402d9baa6e910b3162ffcc63b57048890
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
PD#SWPL-7570
Problem:
there's frequent interrupt when suspend, and can't
enter suspend successfully
Solution:
disable interrupt when suspend/shutdown
Verify:
x301
Change-Id: Iad13159da8cf0d48c6374c17df957c26aa177024
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-7006
Problem:
TL1 cave video 1080i 60hz have drawing.
Solution:
dark scenes don't into pulldown32 by vlsi yanling
Verify:
TL1
Signed
Change-Id: Ib77c0f99940c416943baa9b9a8a02a059b274e5b
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: If55159835daf0a87439647586526f836a226504c
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
PD#TV-4708
Problem:
small window,v scaling mode, bottom of the screen is no video.
Solution:
vline is odd, mif out is not more enouth
Verify:
verify on TL1
Change-Id: I2ac35af3632e8b14df5c773b322d4b2d64b050ba
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#TV-3933
Problem:
Tl1 acodec has pop sound when first sound appear.
Solution:
Disable the DAPM which disable/enable every time
start/stop the audio stream.
Verify:
Tl1 X301.
Change-Id: Iaaf7da125de513bd8297f6c6e41af0a42c9d25bd
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-6028
Problem:
save irqflag locally when ftrace_ramoops io
Solution:
save irqflag locally when ftrace_ramoops io
Verify:
TL1 x301
Change-Id: I6df9700cceaccc97dc983d88ada73197a6968f73
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#OTT-2068
Problem:
When playing 1280x128 video under normal screen mode, the aspect ratio from
decodec is not accurate enough by multipling 0x100. (128x256/1280=25.6).
Dropping 0.6 will cause height losing 9 lines.
Solution:
Using new interface to pass real ar width and height following steps:
1.Set old ar variable to 0x3ff as a trigger flag.
2.set the original ar value into sar_width and sar_height of vframe
Verify:
verified on franklin
Change-Id: I8a794edd968a76f198ee9cb168a7cfb858c858f8
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: Ia121e57ad69c5b0d211e14bf3a61f165457e54c7
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-7324
Problem:
tvafe work abnormal when use vdin1 preview
Solution:
revert the previous commit for v4l2start/stop
Verify:
x301
This reverts commit 81c1e1449c.
Change-Id: I8cdefececb8b01cb86426684a6c700bc9bf8b615
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-6994
Problem:
Sometime will lose msg. because of the isr src
number connected to timer.
Solution:
modify irq src number to 203
Verify:
tl1
Change-Id: I12586b543dbf87a964ba79e1c82561f9516f8e3c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-7511
Problem:
no need enable vdin afbce under 4k,
it is no help for bandwidth with these resolution
Solution:
only enable vdin afbce for 4k resolution
Verify:
x301
Change-Id: I283efd872004846d158ef6c9addbd1e666d2f61a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high
frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high
freq when running particle
Change-Id: Ifcb286cd37faa9f618b48ab515ca360aba563a34
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high freq when running particle
Change-Id: Ie10335d1f3a043d4418245d31efa8b42077031a9
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
PD#SWPL-7197
Problem:
There is not detail calculation process for i2c duty cycle
Solution:
add detail calculation process for i2c duty cycle
Verify:
verified on x301
Change-Id: Ifc222acda3268f792f63e84c6dc3513d80568e19
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-5475
Problem:
need to add interface of HDR Prime SL driver
Solution:
add interface of HDR Prime SL driver
Verify:
U212
Change-Id: If0e62b74ccbaa4ede490e7a9896d9f5915480d6f
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-6937
Problem:
1.get lefttime error by 'cat sys/class/watchdog/watchdog0/timeleft' cmd.
2.if DTS is configured to feed watchdog by Android, the system will
restart automatically after wake up.
Solution:
1.modify the code to get time.
2.when the system wakes up, first judge whether the watchdog runs,
and then decide whether to start the watchdog.
Verify:
test pass on u200
Change-Id: If64888ffdd5651e8cfcace5ea0d0da31641bb397
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#OTT-2524
Problem:
enable sdr2hdr function, uboot logo have color change
Solution:
match uboot sdr2hdr function
Verify:
verify on G12A
Change-Id: I160cd6141d09a385d299ca96a89eb1ebf09c86e8
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#TV-4708
Problem:
small window, bottom of the screen is covered by
blank on the online video
Solution:
vline is odd, mif out is not right
Verify:
verify on TL1
Change-Id: I39eb0cdfd2f4b200a09a9c8b779f509caf6dea37
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-6696
Problem:
Pad key '+' cannot work
Solution:
Add to pad key support list
Add more key support for SBR remote
Verify:
S400 S400_SBR A113D
Change-Id: I9bdc3053f2b3ce778e9c2f682fcf31ac054887b4
Signed-off-by: Yeping Miao <yeping.miao@amlogic.com>
PD#SWPL-7326
Problem:
slab-out-of-bounds in strlen called by name_store
Solution:
Make sure the string passed to strlen is always '\0'
ended
Verify:
Locally
Change-Id: Ifd78a100c0e34ff9afb527ebe7b044ceb5c3505e
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-5038
Problem:
image will block when pts discontinue
Solution:
do not show the frame when pts greater than pcr
Verify:
tested on Marconi
Change-Id: I57ea973b7fdcdc7cded2c5c9b681be29f0a31a4b
Signed-off-by: peter wang <peter.wang@amlogic.com>
