clk init is only used at rk3588 but rk3528 version is bigger
then rk3588
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: I0730242f223b6ab3b48765c13fe4ff1ab2803570
Add branch_gate_no_set_rate for gate clks not
allowed to support setting rate.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Change-Id: Ic940acbc035804a011e59b8e1a0d440168e18c26
fix suspend error by vir dev and hw dev run SYSTEM_SLEEP_PM_OPS
Change-Id: I10971c3f43debf082278cf13aacf68eb97d2f0c3
Signed-off-by: Cai YiWei <cyw@rock-chips.com>
1、Fixes brightness is increasing to a stable value when
sensor’s exp reg is fixed value
2、Fixes cross stripe in the first 15 frame
this patch will delay 3ms before frame start
Signed-off-by: Su Yuefu <yuefu.su@rock-chips.com>
Change-Id: I40ea052ae9e4677b5dc0451ce683f5445feeeed5
BACKGROUND:
DTS-HD Bitstream sounds noise occasionally on Denon-AVR-X2700H,
and we found this happen sometime on PLL(frac mode), But it's gone
on PLL(int mode).
This patch Assign parent of I2S5/6 which used for HDMI0/1 to GPLL
to fix DTS-HD Bitstream noise occasionally on Denon-AVR-X2700H.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I071409278ab983af3c32e7b282de1e2819bb706b
BACKGROUND:
DTS-HD Bitstream sounds noise occasionally on Denon-AVR-X2700H,
and we found this happen sometime on PLL(frac mode), But it's gone
on PLL(int mode).
This patch Adds "CLK_SET_RATE_NO_REPARENT" for I2S5/6 which used
for HDMI0/1 to make its parent fixed from GPLL(int mode) to fix
DTS-HD Bitstream noise occasionally on Denon-AVR-X2700H.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I5694c0a7839df817fd32b82ce69450f0eebdcf77
The dwc2 driver use the nak interrupt for the starting point
of isoc-in transfer. The first nak interrupt for isoc-in means
that in token has arrived and the dwc2 driver can obtain the
(micro) frame of the token to set the even/odd (micro) frame
field of DIEPCTL.
However, on some platforms (e.g Rockchip rk3308) which don't
support the "OTG_MULTI_PROC_INTRPT", it means that all device
endpoints share the same nak mask and interrupt. If the nak
interrupt is always enabled, it may trigger nak interrupt storm
by other endpoints except the isoc-in endpoint. So we disable
the nak interrupt when get first isoc in token if the feature
"OTG_MULTI_PROC_INTRPT" isn't enabled.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I99c71a5e0d7903346fd8f71619b6736c3181c0ec
Because struct rga_external_buffer is not initialized before importbuffer.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I51e341b80aee6bb4ea70eee4f6c9a247947a8f85
Some linux app(cusor) may set negative coordinates(crtc_x/y)
And some linux app(mpv) may set coordinates outside the screen.
These are both unsupported on rockchip vop.
so we use clipped coordinates here.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: Id2322113f0973271997575678cda478a9987266b
if isp work in isp_unit mode and hdr mode and online mode,
buffer addr for half frame of right side must 16 byte align,
otherwise, the buffer to ddr need config to uncompact
Signed-off-by: Zefa Chen <zefa.chen@rock-chips.com>
Change-Id: I29792f2fbeed410d0c640b8bee27f741915086be
Reorder and add missing functions on !CONFIG_ROCKCHIP_SIP.
Return SIP_RET_NOT_SUPPORTED on !CONFIG_ROCKCHIP_SIP.
Change-Id: Ic02b5680ba00cb5186a9180926199ac534d5838f
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
1/ using RGA instead of MULTI_RGA in rk312x
2/ enable isp & ddrclk_sip_v2 in rk312x
3/ enable tve & motorcomm_phy in rk3128
Change-Id: I17793fca5025dc9e42aa6550c7c8cb16bad44529
Signed-off-by: Jianlong Wang <jianlong.wang@rock-chips.com>
