PD#SWPL-3203
Problem:
android P can not boot up on G12A with 32bit kernel
Solution:
get register base from dts
Verify:
Local
Change-Id: Ifb3163a867c1c8ed4f8c344d064cead216334773
Signed-off-by: Pengguang Zhu <pengguang.zhu@amlogic.com>
PD#SWPL-2157
Problem:
gdc module need to get dma address directly
Solution:
add a convert function to map dma address
Verify:
g12b
Change-Id: I1d40350e4727335d1f69f38caafb1dfe7b0db842
Signed-off-by: Keke Li <keke.li@amlogic.com>
PD#SWPL-2344
Problem:
TXLX need to support secure upgrade check
Solution:
add defendkey support in all TXLX dts
Verify:
TXLX skt board verify pass
Change-Id: Ice348161f0a01698bc40e9fb291d1020f478b1fa
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-1219
Problem:
When open vmap stack, suspend will fail on U200. If open cpu idle,
resume from idle will fail too.
Solution:
set up vmap stack early before open IRQ. If set up this stack late
than IRQ open, stack will point to a ramdom address
Verify:
u200
Change-Id: Ie60f6faadf9afece47ccc887a0af46814f070897
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-3076
Problem:
Lack of debug infos when undefined instr happens at user space
Solution:
Call show_all_pfn when undefined instr happens at user space
Verify:
Locally on ampere
Change-Id: Id24e797c2781c94c507ad07ec17a3d4ae7d44cd9
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-3134
Problem:
the DAC gain set is not work
Solution:
update and aml_codec_tl1_acodec.c, change the method of
getting codec pointer from kcontrol pointer.
Verify:
verify by T962x2_X301 board
Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
PD#SWPL-3140
Problem:
tl1 ipa coeff and power data no match test data
Solution:
tl1 ipa coeff and power data update for match chip test data
Verify:
tl1 x301 pass
Change-Id: Idcf1cf7c317e0b3ebb0becb057b4c8fa35e64a62
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
PD#SWPL-1664
Problem:
DTV search menu does not have ISDB-T entry
Solution:
add ISDB-T system support.
Verify:
verified by einstein
Change-Id: Ie0bdc988d53256487e24c3123320b50f2a58cdf3
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-2652
Problem:
X301/T309 AMP volume configured to small
Solution:
change the default external AMP codec mixer name to a match
the ini parsing function in audio hal.
TODO: need dynamically check the different codec mixer name
in ini file.
Verify:
verify by x301
Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#SWPL-2941
Problem:
sr top ctrl is closed when video off
Solution:
txl and txl sr top don't close
Verify:
TxL
Change-Id: Ia8e7e3bd93dd328497af66cf9758e3021cafe22c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-2759
Problem:
need over-driver function for tl1 tcon
Solution:
add tcon cma memory and od setting support
Verify:
x301
Change-Id: I926d221fef3317be8b3879a35298035ac9babcce
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-1773
Problem:
After adding optimization of vmap stack, we can found stack usage
of each functions when handle vmap fault. From test log we see some
functions using large stack size which over 256bytes. Especially
common call path from fs. We need to optimize stack usage of these
functions to reduce stack fault probability and save stack memory
usage.
Solution:
1. remove CONFIG_CC_STACKPROTECTOR_STRONG and set STACKPROTECTOR to
NONE. This can save stack usage add by compiler for most functions.
Kernel code size can also save over 1MB.
2. Add some noinline functions for android_fs_data rw trace calls. In
these trace call it allcated a 256 bytes local buffer.
3. Add a wrap function for mem abort handler. By default, it defined a
siginfo struct(size over 100 bytes) in local but only used when fault
can't be handled.
4. reduce cached page size for vmap stack since probability of page
fault caused by stack overflow is reduced after function stack usage
optimized.
Monkey test show real stack usage ratio compared with 1st vmap
implementation reduced from 35% ~ 38% to 26 ~ 27%. Which is very
close to 25%, theory limit.
Verify:
P212
Change-Id: I5505cacc1cab51f88654052902852fd648b6a036
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-3010
Problem:
the arc can't work
Solution:
add the port map for connect status
Verify:
verified on darwin
Change-Id: I9f886c35de8670acdc431185bb26aa1836a8c150
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
PD#SWPL-2776
Problem:
did not release the free node of rsv information
Solution:
release free node and set bit mask in right way
Verify:
S400
Change-Id: I781f2374b91ca1e7cd1a66e75fc554318737c377
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#SWPL-2719
Problem:
Can't idetify correctlly when move disk have multi
partition
Solution:
Remove the function of using the partition name as
the device node name
Verify:
test pass on tl1 ref board
Change-Id: I113e63f209c529149fb94b0bb10b0b254717c2bf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-2145
Problem:
HDMI Rx Video path display latency of Game mode and Normal mode
Solution:
optimize game mode
Verify:
T962X-R311
Change-Id: Ib0a41915dfb088495c976d56ab812f90e31602f4
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-3009
Problem:
32bit frontend app can't call ioctl in 64bit-kernel
Solution:
Add 32bit define in header and handle in dvb_frontend in 64bit-kernel
Verify:
Verify at android_p at R311
Change-Id: I63178803cfb1cf7d670e3c2b55f104e97f5afa63
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
PD#SWPL-2618
Problem:
TL1 timeshift display have a lot mosaic
Solution:
tune ts clk to a smaller value
Verify:
verified by t962x2_x301
Change-Id: I89c8cdb3317e42101fc8f161436d33ccd0761945
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
add defendkey support in all G12A dts
Verify:
G12A skt board verify pass
Change-Id: I7343c2c553dfe776eefcfff9ab3a270c87014118
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2980
Problem:
ddr bandwidth measure is not enabled on TL1
Solution:
Add port config and dtsi for TL1
Verify:
t962x2_x301
Change-Id: I1fa932a179586f48e3698c53975b64b204a83731
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-1909
Problem:
If physical address of a memory location is not in linear mapping
range, then any caller with phys_to_xxxx to get a pointer will
cause bug.
Solution:
Check input address range for phys_to_xxxx to get a BUG output.
This change is used for debug
Verify:
P212
Change-Id: I13bcaa3983e2d730b8d2bc03cd28c62585f49969
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
1.modify reserve memory mode
2.only use cpu0 in defendkey write process
Verify:
G12A skt board verify pass
Change-Id: Iad771381e959a79dcba7a0adb862295fa5ba5dee
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-1081
Problem:
Need get freed handle for DRM frame mode
Solution:
Add ioctl cmd to get freed handle
Verify:
P212
Change-Id: Ic0ce64061e334fdea5580d9f92b3e0b58caa88eb
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#SWPL-2735
Problem:
bt remote re-connected fail
Solution:
control bluetooth opwer up
Verify:
Verifying on Public Edition r311
Change-Id: I8c74442894f606d5afd992e52d6c80bada0aed9f
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
PD#SWPL-2948
Problem:
Miss the sr core1 bit mask to cause display abnormal
Solution:
Add the bit mask for sr core1
Verify:
Test pass by x301
Change-Id: I742d86b610a9748adad7c143d7a85c6796d3c8f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#OTT-937
Problem:
When kill mediacodec during playing drm, tvp memory not be freed
Solution:
Check tvp flag in kernel, free tvp memory if flag is not zero
Verify:
P212
Change-Id: I35cbb2808bf179710ec59bd5227995949946ee77
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#SWPL-2850
Problem:
add NR 5 line set for TL1
Solution:
add NR setting
Verify:
TL1
Change-Id: Iba105103a38ec244190f7cefbe66e7d662c7d0a2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-2960
Problem:
If the overlay dts refers to a node which does not exist in the base
device tree, the final fdt will be in a damaged state after doing fdt
overlay
Solution:
Use the standard overlay dts syntax to note node to be applied instead
of the google recommended one
Verify:
Locally on P230
Change-Id: Ibf45abff1348437bc3fc2745e6d955cc8292db46
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-2685
Problem:
the atom switch wrong channel when wakeup by device
Solution:
set the phy port the same as ui id
Verify:
atom
Change-Id: I4e43f83af5bb30a2388df7e7030f135c3f0830ad
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
PD#OTT-1025
Problem:
not support gen clock
Solution:
add gen clock
Verify:
test passed on g12a u200
Change-Id: I5199289d3cd1483fffbbd41f8d104369214ba302
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#OTT-1025
Problem:
don't support gen_clk_ee and gen_clk_ao pin groups
Solution:
add gen_clk_ee/ao pin groups according to the corepinmux document
Verify:
test pass on U200
Change-Id: Ia3e61079def285c482d8dc4957b5f9e7db35847d
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
