Vop hardware only support the 4 byte align stride, but
if logo's stride is not align with 4 byte, will get
error display.
Change-Id: I543bbbea98f14702ae0e5f058075c39b8fd6fd68
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
kernel logo not use ymirror now, so if uboot logo use ymirror,
we need close it when switch to kernel logo, otherwise, would get
iommu crash
Change-Id: I4a607f75ada4cf6454c7e0f4614b629ef747e851
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
if the extend screen type is same to prmry screen type,
the GRF reg config for vop selete will be error;
Change-Id: I6671ae69da175352bd1935254603e434e85900ea
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
Support cma-heap, also remove unused id definations.
Change-Id: I81608291b076ed55a1c439abfa9281ba30dff1b6
Signed-off-by: Xu Jianqun <jay.xu@rock-chips.com>
With the RK3399 FPGA dts file, the FPGA board is able to boot with
very simple boot system.
Change-Id: I3484faf02cf9e6adab4379752abcc6cb8c9ed5b2
Signed-off-by: Xu Jianqun <jay.xu@rock-chips.com>
Add the dt-bindings header for the rk3399, that gets shared between
the clock controller and the clock references in the dts.
Change-Id: I01830a46b679f4630506e8cb48b1a39e113a9952
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
RK3228's armclk has 3 parents, so allow cpuclk to have
more than 2 parents.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from linux-next.git
commit ea03835fb8)
Change-Id: Iddb60e4f7bda91b98b4a3e42f196eee510173dce
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Currently, when tring to set up a serial console with a higher
baud rate, it would fallback to 921600.
Tested-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Change-Id: Id93f2b559478f38c735213d523d3f72f6745f6a0
Direct load 24bit bmp data to display, but its data format
is BGR888, so add BGR888 support for uboot logo.
Change-Id: Id93f2b559478f38c735213d523d3f72f6745f6a8
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Uboot logo need ymirror function, but now only have mirror_en to
enable both xmirror and ymirror.
Change-Id: Ic676c4451817db2127327a1a56addeccb2436f21
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Uboot logo address start point may be not align PAGE_SIZE, it would
align to wrong point by pages vmap, and cause uboot logo error display.
So before pages vmap, align the uboot logo address.
Change-Id: I93f030e1b7ee13a4dc19d1421f520478868318ef
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reported-by: Wen Dingxian <shawn.wen@rock-chips.com>
We enable win0 for uboot display, but win last_state is 0,
when we update win config from config_done ioctl, the state judge
is wrong.
Change-Id: I9955bed1683586254a908cb9395d27585e234b10
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Now only find rk322x and rk3368 support do ymirror in windows.
Change-Id: Iba49d64bb51db8fb35e6b21cab8aeba23dbd52b6
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
All layers allow out of right side and bottom side.
And hardware cursor want to support outside of right and bottom.
Change-Id: I27d64b2e12326fbad436f291a9fb5092538428f9
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
This driver will directly use cpufreq-dt driver as backend.
Change-Id: Iec5a4ff05a4829fdbc3535f94e92759d4238623d
Signed-off-by: Xiao Feng <xf@rock-chips.com>
Add device tree bindings documentation and a header file
for rockchip's RK818 pmic
Change-Id: Ic021c3555e980fa7f083b0720ab43ba757d032e4
Signed-off-by: Shenfei xu <xsf@rock-chips.com>
modify syr82x nodes for use the shared driver fan53555
Change-Id: I42269ab63838244da2cde45e916ef953227e95c0
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Add suspend/resume enable/disable setting function.
Silergy SYR82x regulators share the exact same functionality and register
layout as the Fairchild FAN53555 regulators.
The fan53555 is upstreamed.
Therefore use fan53555.c for support syr82x.
Change-Id: If1d72a34d26c705796bc4d33de7187116edf4aa8
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Add the devicetree binding for the cru on the rk3399 which quite
similar structured as previous clock controllers.
Change-Id: I726011854d84312c5b831612246ad0decf317d68
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Pull SCSI fix from James Bottomley:
"A single fix for machines with pages > 4k (PPC mostly).
There's a bug in our optimal transfer size code where we don't account
for pages > 4k and can set the transfer size to be less than the page
size causing nasty failures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Reject optimal transfer length smaller than page size
Pull PCI fixlet from Bjorn Helgaas:
"This marks the TI DRA7xx host bridge driver as broken. Apparently it
has never worked without some additional out-of-tree code, so I'm
going to mark it broken now and remove it completely next cycle unless
it's fixed"
* tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dra7xx: Mark driver as broken
kernel test robot has reported the following crash:
BUG: unable to handle kernel NULL pointer dereference at 00000100
IP: [<c1074df6>] __queue_work+0x26/0x390
*pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53
Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1
Workqueue: events vmstat_shepherd
task: cb684600 ti: cb7ba000 task.ti: cb7ba000
EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0
EIP is at __queue_work+0x26/0x390
EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000
ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0
Stack:
Call Trace:
__queue_delayed_work+0xa1/0x160
queue_delayed_work_on+0x36/0x60
vmstat_shepherd+0xad/0xf0
process_one_work+0x1aa/0x4c0
worker_thread+0x41/0x440
kthread+0xb0/0xd0
ret_from_kernel_thread+0x21/0x40
The reason is that start_shepherd_timer schedules the shepherd work item
which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates
that workqueue so if the further initialization takes more than HZ we
might end up scheduling on a NULL vmstat_wq. This is really unlikely
but not impossible.
Fixes: 373ccbe592 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM SoC fixes from Arnd Bergmann:
"This is the final small set of ARM SoC bug fixes for linux-4.4, almost
all regressions:
OMAP:
- data corruption on the Nokia N900 flash
Allwinner:
- Two defconfig change to get USB working again
ARM Versatile:
- Interrupt numbers gone bad after an older bug fix
Nomadik:
- Crashes from incorrect L2 cache settings
VIA vt8500:
- SD/MMC support on WM8650 never worked"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
dts: vt8500: Add SDHC node to DTS file for WM8650
ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices
ARM: versatile: fix MMC/SD interrupt assignment
ARM: nomadik: set latencies to 8 cycles
ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
ARM: Fix broken USB support in sunxi_defconfig
