[ Upstream commit 90fb69212c ]
On MT7986 the WiFi driver currently does not get automatically loaded,
requiring manual modprobing because the device tree compatibles are not
exported into metadata.
Add the missing MODULE_DEVICE_TABLE macro to fix this.
Fixes: 99ad32a4ca ("mt76: mt7915: add support for MT7986")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd159398a2 ]
When invalidating buffers under the partial tail page,
jbd2_journal_invalidate_folio() returns -EBUSY if the buffer is part of
the committing transaction as we cannot safely modify buffer state.
However if the buffer is already invalidated (due to previous
invalidation attempts from ext4_wait_for_tail_page_commit()), there's
nothing to do and there's no point in returning -EBUSY. This fixes
occasional warnings from ext4_journalled_invalidate_folio() triggered by
generic/051 fstest when blocksize < pagesize.
Fixes: 53e872681f ("ext4: fix deadlock in journal_unmap_buffer()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26208a7cff ]
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.
Fixes: 24afd80d99 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72c215ed87 ]
commit fe630de009 ("md/raid10: avoid deadlock on recovery.") allowed
normal io and sync io to exist at the same time. Task hung will occur as
below:
T1 T2 T3 T4
raid10d
handle_read_error
allow_barrier
conf->nr_pending--
-> 0
//submit sync io
raid10_sync_request
raise_barrier
->will not be blocked
...
//submit to drivers
raid10_read_request
wait_barrier
conf->nr_pending++
-> 1
//retry read fail
raid10_end_read_request
reschedule_retry
add to retry_list
conf->nr_queued++
-> 1
//sync io fail
end_sync_read
__end_sync_read
reschedule_retry
add to retry_list
conf->nr_queued++
-> 2
...
handle_read_error
get form retry_list
conf->nr_queued--
freeze_array
wait nr_pending == nr_queued+1
->1 ->2
//task hung
retry read and sync io will be added to retry_list(nr_queued->2) if they
fails. raid10d() called handle_read_error() and hung in freeze_array().
nr_queued will not decrease because raid10d is blocked, nr_pending will
not increase because conf->barrier is not released.
Fix it by moving allow_barrier() after raid10_read_request().
raise_barrier() will wait for nr_waiting to become 0. Therefore, sync io
and regular io will not be issued at the same time.
Also remove the check of nr_queued in stop_waiting_barrier. It can be 0
but don't need to be blocking. Remove the check for MD_RECOVERY_RUNNING as
the check is redundent.
Fixes: fe630de009 ("md/raid10: avoid deadlock on recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 935fc6fa64 ]
In __replace_atomic_write_block(), we missed to check return value
of inc_valid_block_count(), for extreme testcase that f2fs image is
run out of space, it may cause inconsistent status in between SIT
table and total valid block count.
Cc: Daeho Jeong <daehojeong@google.com>
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de6d014a09 ]
Currently, perf_event sample period in perf_event_stackmap is set too low
that the test fails randomly. Fix this by using the max sample frequency,
from read_perf_max_sample_freq().
Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK()
with if-printf, as CHECK is not available in testing_helpers.c.
Fixes: 1da4864c2b ("selftests/bpf: Add callchain_stackid")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f86a6ff6f ]
fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.
So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.
Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()
Fixes: c38dbbfab1 ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6622b76fe9 ]
Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.
Fixes: 09bd1ff4b1 ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5a6ab0950 ]
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97416f67d5 ]
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62904b3b33 ]
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c098aa001 ]
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab76e7206b ]
Nvme specifications state that:
If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.
In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.
While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 756a7f9087 ]
While initializing spectral, the magic value is getting written to the
invalid memory address leading to random boot-up crash. This occurs
due to the incorrect index increment in ath11k_dbring_fill_magic_value
function. Fix it by replacing the existing logic with memset32 to ensure
there is no invalid memory access.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Fixes: d3d358efc5 ("ath11k: add spectral/CFR buffer validation support")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db21973263 ]
The usual devm_regulator_get() call already handles "optional"
regulators by returning a valid dummy and printing a warning
that the dummy regulator should be described properly. This
code open coded the same behaviour, but masked any errors that
are not -EPROBE_DEFER and is quite noisy.
This change effectively unmasks and propagates regulators errors
not involving -ENODEV, downgrades the error print to warning level
if no regulator is specified and captures the probe defer message
for /sys/kernel/debug/devices_deferred.
Fixes: 2e12f53663 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea449f7fa0 ]
The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 7ad269ea1a ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91a0c0c141 ]
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns false, drbl_regs_memmap_p is not remapped. This passes a NULL
pointer to iounmap(), which can trigger a WARN() on certain arches.
When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns true, drbl_regs_memmap_p may has been remapped and
ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a
NULL pointer to iounmap().
To fix these issues, we need to add null checks before iounmap(), and
change some goto labels.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Shuchang Li <lishuchang@hust.edu.cn>
Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cn
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cdb422c83 ]
xfstest generic/019 reports a bug:
kernel BUG at mm/filemap.c:1619!
RIP: 0010:folio_end_writeback+0x8a/0x90
Call Trace:
end_page_writeback+0x1c/0x60
f2fs_write_end_io+0x199/0x420
bio_endio+0x104/0x180
submit_bio_noacct+0xa5/0x510
submit_bio+0x48/0x80
f2fs_submit_write_bio+0x35/0x300
f2fs_submit_merged_ipu_write+0x2a0/0x2b0
f2fs_write_single_data_page+0x838/0x8b0
f2fs_write_cache_pages+0x379/0xa30
f2fs_write_data_pages+0x30c/0x340
do_writepages+0xd8/0x1b0
__writeback_single_inode+0x44/0x370
writeback_sb_inodes+0x233/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x2d0
wb_workfn+0x367/0x4a0
process_one_work+0x21d/0x430
worker_thread+0x4e/0x3c0
kthread+0x103/0x130
ret_from_fork+0x2c/0x50
The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write()
in f2fs_write_single_data_page() tries to flush IPU bio in cache, however
f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter,
result in submitting random cached bio which belong to other IO context,
then it will cause use-after-free issue, fix it by adding additional
validity check.
Fixes: 0b20fcec86 ("f2fs: cache global IPU bio")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d769ccaf95 ]
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 686cd976b6 ]
When jent initialisation fails for any reason other than ENOENT,
the entire drbg fails to initialise, even when we're not in FIPS
mode. This is wrong because we can still use the kernel RNG when
we're not in FIPS mode.
Change it so that it only fails when we are in FIPS mode.
Fixes: 57225e6797 ("crypto: drbg - Use callback API for random readiness")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67cf52cdb6 ]
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af607a861 ]
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes: 3573f38401 ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68e7322142 ]
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes: 27e934bec3 ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2b50f1726 ]
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes: a89052572e ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 054fbf7ff8 ]
The arguments passed to the trace events are of type unsigned int,
however the signature of the events used __le32 parameters.
I may be missing the point here, but sparse flagged this and it
does seem incorrect to me.
net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h):
./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
... (a lot more similar warnings)
net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service
net/qrtr/ns.c:115:47: got unsigned int service
net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types)
... (a lot more similar warnings)
Fixes: dfddb54043 ("net: qrtr: Add tracepoint support")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb544224da ]
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set
in completion path, sas_task_abort() will be called to abort only one NCQ
command now, and the host would be set to SHOST_RECOVERY state. But this
may not kick-off EH Immediately until other outstanding QCs timeouts. As a
result, the host may remain in the SHOST_RECOVERY state for up to 30
seconds, such as follows:
[7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0
[7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1
All NCQ commands that are in the queue should be aborted when an NCQ error
occurs in this scenario.
Fixes: 05d91b557a ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4411292267 ]
Similar to how AHCI handles NCQ errors in ahci_error_intr() ->
ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs
to call to initiate a link abort.
This will mark all outstanding QCs as failed and kick-off EH.
Note:
A "force reset" argument is added for drivers which require the ATA error
handling to always reset the device.
A driver may require this feature for when SATA device per-SCSI cmnd
resources are only released during reset for ATA EH. As such, we need an
option to force reset to be done, regardless of what any EH autopsy
decides.
The SATA device FIS fields are set to indicate a device error from
ata_eh_analyze_tf().
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: bb544224da ("scsi: hisi_sas: Handle NCQ error when IPTT is valid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
