1. adjust vdd_logic to 950000uV.
2. adjust vdd_arm to 950000uV.
3. set vdd_10 on.
4. set vcc3v0_pmu on.
Change-Id: I1af72ccbc615f6bdcb59f51ac6ea54e8c3bfe2af
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
remove the 'regulator-always-on' property from vcc3v3_lcd
Change-Id: I056601ed575b993065c17d245195bd376808bbed
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
If change parent to alternate parent and the old parent clock speed is less
than the clock speed of the alternate parent, add dividers first and then
select alternate parent.
If change parent to primary parent, select primary parent first and then
remove dividers.
Change-Id: Ib82de9a936effe5c885639799f3bb5629dc89f8d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
The gpll clock has not yet been created when its children do enable and
prepare in cru critical talbe, so move its children into pmucru critical
talbe that the gpll clock has been created before its children do enable
and prepare.
Change-Id: If5243326bf1d3c926bb1bb12e56e4b9fc9282762
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
If xin32k use the rk808_clkout1, rk808 init is too late,
xin32k enable count and prepare count is not match with it's child clk.
Change-Id: Iec5d1f91b2289b18f41b4d915e6859154a5b7635
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
It needs to contains rate and mux clk for gpu composite clk, so that
the clk_composite_set_rate_and_parent function can be called.
Change-Id: I9818df2adbbcf40f616d2ca230cd83ea1ef2c14f
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
If the regulator is shared between several devices then the lowest
request voltage that meets the system constraints will be used.
Change-Id: Icb6afcb571bddd6709d352dfad8fc2da80567bc0
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
If there is only one opp whose frequency is equal to the initial value
in opp table list, the GPU voltage domain will keep the initial voltage,
it may be too large.
Change-Id: If2ae1c876de185d810e05296b1b9e98855c3ef48
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
drivers/regulator/syr82x.c:451:3: warning: this if
clause does not guard... [-Wmisleading-indentation]
Change-Id: Ibdb1f6f903d1e0dece7b58aa3ec89d075e6d5b79
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/input/touchscreen/cy8c_touchpad.c:77:20: warning: xfer_msg[1].flags
is used uninitialized in this function [-Wuninitialized]
Change-Id: I2d1f199f098b38af92037e2ebbd63c05fc4a1f35
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This patch adds the function of mipi-dphy TX1RX1 for RK3288, the
mipi-dphy TX1RX1 is matched when "txrx_base_addr" is valid.
Change-Id: I01640925157a7082e942188b29f6bbf1318cf3d5
Signed-off-by: Wen Nuan <leo.wen@rock-chips.com>
This reverts commit cbd1d90f72.
8588d88f1a ("ANDROID: android-base.cfg: add CONFIG_IKCONFIG option")
This adds CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC options, which are a
requirement for the O release.
Change-Id: I438ade881219034618afb4cd5174bf750a79d319
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This reverts commit 95bc3a8935.
8588d88f1a ("ANDROID: android-base.cfg: add CONFIG_IKCONFIG option")
This adds CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC options, which are a
requirement for the O release.
Change-Id: Id02fde91ed902f266ff5c81ec04e2427a2877847
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
e8f5f841b764 ("remove CONFIG_ANDROID_LOW_MEMORY_KILLER requirement")
Kernel configuration options should include either
CONFIG_ANDROID_LOW_MEMORY_KILLER for in-kernel lowmemorykiller driver
to be used or a combination of CONFIG_MEMCG and CONFIG_MEMCG_SWAP
if userspace lmkd is preferred. It is not currently possible to express
this logical requirement in the config fragment so the
CONFIG_ANDROID_LOW_MEMORY_KILLER requirement is simply
removed for now.
Change-Id: I9cea0552a285ac635fc44f4b45762988e423d7db
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
e8f5f841b764 ("remove CONFIG_ANDROID_LOW_MEMORY_KILLER requirement")
Kernel configuration options should include either
CONFIG_ANDROID_LOW_MEMORY_KILLER for in-kernel lowmemorykiller driver
to be used or a combination of CONFIG_MEMCG and CONFIG_MEMCG_SWAP
if userspace lmkd is preferred. It is not currently possible to express
this logical requirement in the config fragment so the
CONFIG_ANDROID_LOW_MEMORY_KILLER requirement is simply
removed for now.
Change-Id: I69b9682029a50f4579f3ba11e6a9a497c5a51c28
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
As the edp_hpd pinctrl is reused by hdmi-cec. So the rk3399 will hit the
pinctrl register failed on bootup.
Says: the failed log:
[0.927577] rockchip-pinctrl pinctrl: pin gpio4-23 already requested by
ff940000.hdmi; cannot claim for ff970000.edp
[0.928519 ] rockchip-pinctrl pinctrl: pin-151 (ff970000.edp) status -22
[0.929112] rockchip-pinctrl pinctrl: could not request pin 151
(gpio4-23) from group edp-hpd on device rockchip-pinctr
That will cause the edp can't work on rk3399 SoCs.
Fixes: commit
6e4eaff822 ("arm64: dts: rockchip: add HDMI cec support for rk3399")
Change-Id: I8ba20db55025e33c082beda5160e0398f1681766
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
On rockchip platform, hdmi input format is YCbCr444 when output mode
is YCbCr422. Then the value of HDMI_TX_INVID0 on YCbCr422 is same as
the value of YCbCr444, both is 0x09/0x0b. This make enc_out_bus_format
stroed in struct hdmi_data is wrong, which is MEDIA_BUS_FMT_YUV8_1X24
or MEDIA_BUS_FMT_YUV10_1X30.
When android set enc_out_bus_format to YCbCr422, dw_hdmi_setup will be
called and logo will flash.
This patch use colorspace restored in HDMI_FC_AVICONF0 to distinguish them.
Change-Id: I6b913951b58fb47628617c11d6059bc1be4e370a
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Because it will cause CPU hangs on, so disable the reset temporarily.
Change-Id: I612be4b47145fd1ebf8d8e5d44270f26151768fa
Signed-off-by: Zhong Yichong <zyc@rock-chips.com>
f3d9c312b8 ("Implement memory_state_time, used by qcom,cpubw")
New driver memory_state_time tracks time spent in different DDR
frequency and bandwidth states.
Memory drivers such as qcom,cpubw can post updated state to the driver
after registering a callback. Processed by a workqueue
Bandwidth buckets are read in from device tree in the relevant qualcomm
section, can be defined in any quantity and spacing.
The data is exposed at /sys/kernel/memory_state_time, able to be read by
the Android framework.
Functionality is behind a config option CONFIG_MEMORY_STATE_TIME
Change-Id: Ic3b0b631efd697713360f193ede440cd9ad3bc29
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
f3d9c312b8 ("Implement memory_state_time, used by qcom,cpubw")
New driver memory_state_time tracks time spent in different DDR
frequency and bandwidth states.
Memory drivers such as qcom,cpubw can post updated state to the driver
after registering a callback. Processed by a workqueue
Bandwidth buckets are read in from device tree in the relevant qualcomm
section, can be defined in any quantity and spacing.
The data is exposed at /sys/kernel/memory_state_time, able to be read by
the Android framework.
Functionality is behind a config option CONFIG_MEMORY_STATE_TIME
Change-Id: I4391cc3ed42c9f332bce4a7809c6f120e2798dae
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
