[ Upstream commit 08b613b9e2ba431db3bd15cb68ca72472a50ef5c ]
This patch corrects the full-scale volume setting logic. On certain
platforms, the full-scale volume bit is required. The current logic
mistakenly sets this bit and incorrectly clears reserved bit 0, causing
the headphone output to be muted.
Fixes: 342b6b610a ("ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20250214210736.30814-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d262a192d38e527faa5984629aabda2e0d1c4f54 ]
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/
Fixes: 37bc3e5fd7 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61bcc752d1b81fde3cae454ff20c1d3c359df500 ]
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/
Fixes: ff31e10546 ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae4f16f7d7b59cca55aeca6db7c9636ffe7fbaa ]
The stub versions of __real_pte() etc are only used with HPT & 4K pages,
so move them into the hash-4k.h header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240821080729.872034-1-mpe@ellerman.id.au
Stable-dep-of: 61bcc752d1b8 ("powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b24e67b4056ba83b1e95e005b7e50fdb1cc6cf4 ]
Commit 2f45a4e289 ("ASoC: rockchip: i2s_tdm: Fixup config for
SND_SOC_DAIFMT_DSP_A/B") applied a partial change to fix the
configuration for DSP A and DSP B formats.
The shift control also needs updating to set the correct offset for
frame data compared to LRCK. Set the correct values.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://patch.msgid.link/20250204161311.2117240-1-jkeeping@inmusicbrands.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399a45e5237ca14037120b1b895bd38a3b4492ea ]
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef40f399aa2be8c04aee9b7430705612c104ce5 ]
udc device and gadget device are tightly coupled, yet there's no good
way to corelate the two. Add a sysfs link in udc that points to the
corresponding gadget device.
An example use case: userspace configures a f_midi configfs driver and
bind the udc device, then it tries to locate the corresponding midi
device, which is a child device of the gadget device. The gadget device
that's associated to the udc device has to be identified in order to
index the midi device. Having a sysfs link would make things much
easier.
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20240307030922.3573161-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 391b06ecb63e6eacd054582cb4eb738dfbf5eb77 ]
According to the i.MX93 Fusemap the two MAC addresses are stored in
words 315 to 317 like this:
315 MAC1_ADDR_31_0[31:0]
316 MAC1_ADDR_47_32[47:32]
MAC2_ADDR_15_0[15:0]
317 MAC2_ADDR_47_16[31:0]
This means the MAC addresses are stored in reverse byte order. We have
to swap the bytes before passing them to the upper layers. The storage
format is consistent to the one used on i.MX6 using imx-ocotp driver
which does the same byte swapping as introduced here.
With this patch the MAC address on my i.MX93 TQ board correctly reads as
00:d0:93:6b:27:b8 instead of b8:27:6b:93:d0:00.
Fixes: 22e9e6fcfb ("nvmem: imx: support i.MX93 OCOTP")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20241230141901.263976-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1172460e716784ac7e1049a537bdca8edbf97360 ]
This hook is meant to be used by any provider and instantiating a layout
just for this is useless. Let's instead move this hook to the nvmem
device and add it to the config structure to be easily shared by the
providers.
While at moving this hook, rename it ->fixup_dt_cell_info() to clarify
its main intended purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 391b06ecb63e ("nvmem: imx-ocotp-ele: fix MAC address byte order")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec9c08a1cb8dc5e8e003f95f5f62de41dde235bb ]
Before adding all the NVMEM layout bus infrastructure to the core, let's
move the main nvmem_device structure in an internal header, only
available to the core. This way all the additional code can be added in
a dedicated file in order to keep the current core file tidy.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 391b06ecb63e ("nvmem: imx-ocotp-ele: fix MAC address byte order")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 221cd51efe4565501a3dbf04cc011b537dcce7fb ]
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled.
Cc: stable@vger.kernel.org
Fixes: e5225c820c ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-3-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64627daf0c5f7838111f52bbbd1a597cb5d6871a ]
Avoid using the iterators after the list_for_each() constructs.
This patch should be a NOP, but makes cocci, happier:
drivers/media/usb/uvc/uvc_ctrl.c:1861:44-50: ERROR: invalid reference to the index variable of the iterator on line 1850
drivers/media/usb/uvc/uvc_ctrl.c:2195:17-23: ERROR: invalid reference to the index variable of the iterator on line 2179
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d9fecd096f67 ("media: uvcvideo: Only save async fh if success")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a129ac3555c0dca6f04ae404dc0f0790656587fb ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230925095532.1984344-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: c9c0036c1990 ("soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6a8f54bc2af555738322783ba1e990c2ae7f443 ]
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream
DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite
different and points to unused area.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-7-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c96bee5d5e5b61a9d8d000c9bb37bb9a2a0551 ]
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches
downstream DTS. 0x3000_0000, value used so far, was in datasheet is the
region of CDSP.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-4-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff7c383b8ac0c482a1da7989f703406d78445c6 ]
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a03 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bbeb8d12404cf0603f513fc33269ef9abfbb396 ]
The default handling of the NOT READY sense key is to wait for the device
to become ready. The "wait" is assumed to be relatively short. However
there is a sub-class of NOT READY that have the "... in progress" phrase in
their additional sense code and these can take much longer. Following on
from commit 505aa4b6a8 ("scsi: sd: Defer spinning up drive while SANITIZE
is in progress") we now have element depopulation and restoration that can
take a long time. For example, over 24 hours for a 20 TB, 7200 rpm hard
disk to depopulate 1 of its 20 elements.
Add handling of ASC/ASCQ: 0x4,0x24 (depopulation in progress)
and ASC/ASCQ: 0x4,0x25 (depopulation restoration in progress)
to sd.c . The scsi_lib.c has incomplete handling of these
two messages, so complete it.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20231015050650.131145-1-dgilbert@interlog.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 9ff7c383b8ac ("scsi: core: Do not retry I/Os during depopulation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a744cceebd0480cb39587b3b1339d66a9d14063 ]
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. It also claimed that it
added a read barrier, because as we all known barriers are paired (see
memory-barriers.txt: "Note that write barriers should normally be paired
with read or address-dependency barriers"), however it did not really
add it.
The offending commit used READ_ONCE() to access '__scm' global which is
not a barrier.
The barrier is needed so the store to '__scm' will be properly visible.
This is most likely not fatal in current driver design, because missing
read barrier would mean qcom_scm_is_available() callers will access old
value, NULL. Driver does not support unbinding and does not correctly
handle probe failures, thus there is no risk of stale or old pointer in
'__scm' variable.
However for code correctness, readability and to be sure that we did not
mess up something in this tricky topic of SMP barriers, add a read
barrier for accessing '__scm'. Change also comment from useless/obvious
what does barrier do, to what is expected: which other parts of the code
are involved here.
Fixes: 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-1-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82a0a3e6f8c02b3236b55e784a083fa4ee07c321 ]
My static checker rule complains about this code. The concern is that
if "sample_space" is negative then the "sample_space >= runtime->channels"
condition will not work as intended because it will be type promoted to a
high unsigned int value.
strm->fifo_sample_size is SSI_FIFO_DEPTH (32). The SSIFSR_TDC_MASK is
0x3f. Without any further context it does seem like a reasonable warning
and it can't hurt to add a check for negatives.
Cc: stable@vger.kernel.org
Fixes: 03e786bd43 ("ASoC: sh: Add RZ/G2L SSIF-2 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/e07c3dc5-d885-4b04-a742-71f42243f4fd@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e ]
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e45a09a1da0872786885c505467aab8fb29b5b4 ]
serio_pause_rx() and serio_continue_rx() are usually used together to
temporarily stop receiving interrupts/data for a given serio port.
Define "serio_pause_rx" guard for this so that the port is always
resumed once critical section is over.
Example:
scoped_guard(serio_pause_rx, elo->serio) {
elo->expected_packet = toupper(packet[0]);
init_completion(&elo->cmd_done);
}
Link: https://lore.kernel.org/r/20240905041732.2034348-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 08bd5b7c9a24 ("Input: synaptics - fix crash when enabling pass-through port")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2fad248947d702ed3dcb52b8377c1a3ae201e44 ]
For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently.
The wrong NVM causes poor RF performance, and effects user experience
for several types of laptop with WCN6855 on the market.
Fix by downloading board ID specific NVM if board ID is available.
Fixes: 095327fede ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c5a468c6329bde7dfd46bacff2cbf5f8a8152e ]
Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2fad248947d ("Bluetooth: qca: Fix poor RF performance for WCN6855")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e41137d8bd1a8e8bab8dcbfe3ec056418db3df18 ]
Download board id specific NVM instead of default for WCN7850 if board id
is available.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2fad248947d ("Bluetooth: qca: Fix poor RF performance for WCN6855")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1f010c9d9c62c865d9f54e94075800ba764b4d9 ]
This driver can be built as a module since commit 3b062a0869 ("cpufreq:
dt-platdev: Support building as module"), but unfortunately this caused
a regression because the cputfreq-dt-platdev.ko module does not autoload.
Usually, this is solved by just using the MODULE_DEVICE_TABLE() macro to
export all the device IDs as module aliases. But this driver is special
due how matches with devices and decides what platform supports.
There are two of_device_id lists, an allow list that are for CPU devices
that always match and a deny list that's for devices that must not match.
The driver registers a cpufreq-dt platform device for all the CPU device
nodes that either are in the allow list or contain an operating-points-v2
property and are not in the deny list.
Enforce builtin compile of cpufreq-dt-platdev to make autoload work.
Fixes: 3b062a0869 ("cpufreq: dt-platdev: Support building as module")
Link: https://lore.kernel.org/all/20241104201424.2a42efdd@akair/
Link: https://lore.kernel.org/all/20241119111918.1732531-1-javierm@redhat.com/
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Radu Rendec <rrendec@redhat.com>
Reported-by: Javier Martinez Canillas <javierm@redhat.com>
[ Viresh: Picked commit log from Javier, updated tags ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e018d7a8990c11734704a0767c47fd8efd5388 ]
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cpufreq/cpufreq-dt-platdev.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: f1f010c9d9c6 ("cpufreq: fix using cpufreq-dt as module")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ade81479c7dda1ce3eedb215c78bc615bbd04f06 ]
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066]
CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G
Hardware name: Huawei Cloud OpenStack Nova, BIOS
RIP: 0010:console_unlock+0x343/0x540
RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247
RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0
R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vprintk_emit+0x193/0x280
printk+0x52/0x6e
dump_task+0x114/0x130
mem_cgroup_scan_tasks+0x76/0x100
dump_header+0x1fe/0x210
oom_kill_process+0xd1/0x100
out_of_memory+0x125/0x570
mem_cgroup_out_of_memory+0xb5/0xd0
try_charge+0x720/0x770
mem_cgroup_try_charge+0x86/0x180
mem_cgroup_try_charge_delay+0x1c/0x40
do_anonymous_page+0xb5/0x390
handle_mm_fault+0xc4/0x1f0
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.
Link: https://lkml.kernel.org/r/20241224025238.3768787-1-chenridong@huaweicloud.com
Fixes: 9cbb78bb31 ("mm, memcg: introduce own oom handler to iterate only over its own threads")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ba14deb40a9e9668ec5e66a341ed657e5215c2 ]
The current implementation of the mark_victim tracepoint provides only the
process ID (pid) of the victim process. This limitation poses challenges
for userspace tools requiring real-time OOM analysis and intervention.
Although this information is available from the kernel logs, it’s not
the appropriate format to provide OOM notifications. In Android, BPF
programs are used with the mark_victim trace events to notify userspace of
an OOM kill. For consistency, update the trace event to include the same
information about the OOMed victim as the kernel logs.
- UID
In Android each installed application has a unique UID. Including
the `uid` assists in correlating OOM events with specific apps.
- Process Name (comm)
Enables identification of the affected process.
- OOM Score
Will allow userspace to get additional insight of the relative kill
priority of the OOM victim. In Android, the oom_score_adj is used to
categorize app state (foreground, background, etc.), which aids in
analyzing user-perceptible impacts of OOM events [1].
- Total VM, RSS Stats, and pgtables
Amount of memory used by the victim that will, potentially, be freed up
by killing it.
[1] 246dc8fc95:frameworks/base/services/core/java/com/android/server/am/ProcessList.java;l=188-283
Signed-off-by: Carlos Galo <carlosgalo@google.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d28d0ddb986f56920ac97ae704cc3340a699a30 ]
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Cc: stable@vger.kernel.org # v6.12+
Fixes: 32a7627cf3 ("[PATCH] md: optimised resync using Bitmap based intent logging")
Reported-and-tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-raid/ca3a91a2-50ae-4f68-b317-abd9889f3907@oracle.com/T/#m6e5086c95201135e4941fe38f9efa76daf9666c5
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250124092055.4050195-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec6bb299c7c3dd4ca1724d13d5f5fae3ee54fc65 ]
To avoid dereferencing bitmap directly in md-cluster to prepare
inventing a new bitmap.
BTW, also fix following checkpatch warnings:
WARNING: Deprecated use of 'kmap_atomic', prefer 'kmap_local_page' instead
WARNING: Deprecated use of 'kunmap_atomic', prefer 'kunmap_local' instead
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-7-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 8d28d0ddb986 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82697ccf7e495c1ba81e315c2886d6220ff84c2c ]
drivers/md/md-cluster.c:1220:22: warning: incorrect type in assignment (different base types)
drivers/md/md-cluster.c:1220:22: expected unsigned long my_sync_size
drivers/md/md-cluster.c:1220:22: got restricted __le64 [usertype] sync_size
drivers/md/md-cluster.c:1252:35: warning: incorrect type in assignment (different base types)
drivers/md/md-cluster.c:1252:35: expected unsigned long sync_size
drivers/md/md-cluster.c:1252:35: got restricted __le64 [usertype] sync_size
drivers/md/md-cluster.c:1253:41: warning: restricted __le64 degrades to integer
Fix the warnings by using le64_to_cpu() to convet __le64 to integer.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 8d28d0ddb986 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f287d7e495ae00d4481702f44ff7ca79f5c9bc ]
There are no functional changes, and the new helper will be used in
multiple places in following patches to avoid dereferencing bitmap
directly.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 8d28d0ddb986 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1b6d4441fffd0ba8ae4ced6a12f578c95ca049 ]
Before this patch, the implementation is hacky and hard to understand:
1) md_seq_start set pos to 1;
2) md_seq_show found pos is 1, then print Personalities;
3) md_seq_next found pos is 1, then it update pos to the first mddev;
4) md_seq_show found pos is not 1 or 2, show mddev;
5) md_seq_next found pos is not 1 or 2, update pos to next mddev;
6) loop 4-5 until the last mddev, then md_seq_next update pos to 2;
7) md_seq_show found pos is 2, then print unused devices;
8) md_seq_next found pos is 2, stop;
This patch remove the magic value and use seq_list_start/next/stop()
directly, and move printing "Personalities" to md_seq_start(),
"unsed devices" to md_seq_stop():
1) md_seq_start print Personalities, and then set pos to first mddev;
2) md_seq_show show mddev;
3) md_seq_next update pos to next mddev;
4) loop 2-3 until the last mddev;
5) md_seq_stop print unsed devices;
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230927061241.1552837-3-yukuai1@huaweicloud.com
Stable-dep-of: 8d28d0ddb986 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b8d867ca6e2fc6d152f629fdaf027053b81765a ]
Emmanual Florac reports a strange occurrence when project quota limits
are enabled, free space is lower than the remaining quota, and someone
runs statvfs:
# mkfs.xfs -f /dev/sda
# mount /dev/sda /mnt -o prjquota
# xfs_quota -x -c 'limit -p bhard=2G 55' /mnt
# mkdir /mnt/dir
# xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir
# fallocate -l 19g /mnt/a
# df /mnt /mnt/dir
Filesystem Size Used Avail Use% Mounted on
/dev/sda 20G 20G 345M 99% /mnt
/dev/sda 2.0G 0 2.0G 0% /mnt
I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally
assigns to f_bfree without checking that the filesystem has enough free
space to fill the remaining project quota. However, this is a
longstanding behavior of xfs so it's unclear what to do here.
Cc: <stable@vger.kernel.org> # v2.6.18
Fixes: 932f2c3231 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.")
Reported-by: Emmanuel Florac <eflorac@intellique.com>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a17ebfea9d0c7e0bb7409dcf655bf982a5d6e52 ]
On the data device, calling statvfs on a projinherit directory results
in the block and avail counts being curtailed to the project quota block
limits, if any are set. Do the same for realtime files or directories,
only use the project quota rt block limits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 4b8d867ca6e2 ("xfs: don't over-report free space or inodes in statvfs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a492ff66673c38a77d0815d67b9a8cce2ef57f8 upstream.
Extsize should only be allowed to be set on files with no data in it.
For this, we check if the files have extents but miss to check if
delayed extents are present. This patch adds that check.
While we are at it, also refactor this check into a helper since
it's used in some other places as well like xfs_inactive() or
xfs_ioctl_setattr_xflags()
**Without the patch (SUCCEEDS)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
**With the patch (FAILS as expected)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
xfs_io: FS_IOC_FSSETXATTR testfile: Invalid argument
Fixes: e94af02a9c ("[XFS] fix old xfs_setattr mis-merge from irix; mostly harmless esp if not using xfs rt")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81a1e1c32ef474c20ccb9f730afe1ac25b1c62a4 upstream.
Directly return the error from xfs_bmap_longest_free_extent instead
of breaking from the loop and handling it there, and use a done
label to directly jump to the exist when we found a suitable perag
structure to reduce the indentation level and pag/max_pag check
complexity in the tail of the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef22684038aa577c10972ee9c6a2455f5fac941 upstream.
Recently, we found that the CPU spent a lot of time in
xfs_alloc_ag_vextent_size when the filesystem has millions of fragmented
spaces.
The reason is that we conducted much extra searching for extents that
could not yield a better result, and these searches would cost a lot of
time when there were millions of extents to search through. Even if we
get the same result length, we don't switch our choice to the new one,
so we can definitely terminate the search early.
Since the result length cannot exceed the found length, when the found
length equals the best result length we already have, we can conclude
the search.
We did a test in that filesystem:
[root@localhost ~]# xfs_db -c freesp /dev/vdb
from to extents blocks pct
1 1 215 215 0.01
2 3 994476 1988952 99.99
Before this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) * 15597.94 us | }
After this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) 19.176 us | }
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a201dcfa1ff0dcfe4348c40f3ad8bd68b97eb6c upstream.
Currently log recovery never updates the in-core perag values for the
last allocation group when they were grown by growfs. This leads to
btree record validation failures for the alloc, ialloc or finotbt
trees if a transaction references this new space.
Found by Brian's new growfs recovery stress test.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
