[ Upstream commit c53ed55cb2 ]
Syzbot reported a OOB Write bug:
loop0: detected capacity change from 0 to 64
==================================================================
BUG: KASAN: slab-out-of-bounds in hfs_asc2mac+0x467/0x9a0
fs/hfs/trans.c:133
Write of size 1 at addr ffff88801848314e by task syz-executor391/3632
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133
hfs_cat_build_key+0x92/0x170 fs/hfs/catalog.c:28
hfs_lookup+0x1ab/0x2c0 fs/hfs/dir.c:31
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
If in->len is much larger than HFS_NAMELEN(31) which is the maximum
length of an HFS filename, a OOB write could occur in hfs_asc2mac(). In
that case, when the dst reaches the boundary, the srclen is still
greater than 0, which causes a OOB write.
Fix this by adding a check on dstlen in while() before writing to dst
address.
Link: https://lkml.kernel.org/r/20221202030038.1391945-1-zhangpeng362@huawei.com
Fixes: 328b922786 ("[PATCH] hfs: NLS support")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reported-by: <syzbot+dc3b1cf9111ab5fe98e7@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c49bd2b4 ]
sysv_nblocks() returns 'blocks' rather than 'res', which only counting
the number of triple-indirect blocks and causing sysv_getattr() gets a
wrong result.
[AV: this is actually a sysv counterpart of minixfs fix -
0fcd426de9d0 "[PATCH] minix block usage counting fix" in
historical tree; mea culpa, should've thought to check
fs/sysv back then...]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee9ef11bd2 ]
Check clk for NULL before calling clk_enable_unlocked where clk
is dereferenced. There is such check in other implementations
of clk_enable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a8aadcf0b ]
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41da ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc80c2e438 ]
Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.
Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b997b2bb2 ]
As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.
Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource
Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch.
Fixes: 3ad0876554 ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221126050745.778967-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cefa72129e ]
Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each
function to reserve extra space for hot-patching, and currently it is not
possible to probe these functions because branch_setup_xol_ops() wrongly
rejects NOP with REP prefix as it treats them like word-sized branch
instructions.
Fixes: 250bbd12c2 ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns")
Reported-by: Seiji Nishikawa <snishika@redhat.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 470188b09e ]
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes: 8aa5e56eeb ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64ea6e44f8 ]
Writing the current state back in hotplug/target calls cpu_down()
which will set cpu dying even when it isn't and then nothing will
ever clear it. A stress test that reads values and writes them back
for all cpu device files in sysfs will trigger the BUG() in
select_fallback_rq once all cpus are marked as dying.
kernel/cpu.c::target_store()
...
if (st->state < target)
ret = cpu_up(dev->id, target);
else
ret = cpu_down(dev->id, target);
cpu_down() -> cpu_set_state()
bool bringup = st->state < target;
...
if (cpu_dying(cpu) != !bringup)
set_cpu_dying(cpu, !bringup);
Fix this by letting state==target fall through in the target_store()
conditional. Also make sure st->target == target in that case.
Fixes: 757c989b99 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90d7588967 ]
Commit ca16d5bee5 ("futex: Prevent robust futex exit race") addressed
two cases when tasks waiting on a robust non-PI futex remained blocked
despite the futex not being owned anymore:
* if the owner died after writing zero to the futex word, but before
waking up a waiter
* if a task waiting on the futex was woken up, but died before updating
the futex word (effectively swallowing the notification without acting
on it)
In the second case, the task could be woken up either by the previous
owner (after the futex word was reset to zero) or by the kernel (after
the OWNER_DIED bit was set and the TID part of the futex word was reset
to zero) if the previous owner died without the resetting the futex.
Because the referenced commit wakes up a potential waiter only if the
whole futex word is zero, the latter subcase remains unaddressed.
Fix this by looking only at the TID part of the futex when deciding
whether a wake up is needed.
Fixes: ca16d5bee5 ("futex: Prevent robust futex exit race")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221111215439.248185-1-izbyshev@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4767d4c07 ]
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic
No functional changes intended
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2cab953b4 ]
So that MT7621_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f44f7156f ]
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b27110 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91fda1f88c ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9049e1ca41 ]
Fault injection tests trigger warnings like this:
kernfs: can not remove 'chip_name', no directory
WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
Call Trace:
<TASK>
remove_files.isra.1+0x3f/0xb0
sysfs_remove_group+0x68/0xe0
sysfs_remove_groups+0x41/0x70
__kobject_del+0x45/0xc0
kobject_del+0x29/0x40
free_desc+0x42/0x70
irq_free_descs+0x5e/0x90
The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.
A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.
Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.
To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.
[ tglx: Massage changelog, comments and use a state bit. ]
Fixes: ecb3f394c5 ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0aa651068 ]
We had a report of this:
BUG: sleeping function called from invalid context at fs/nfsd/filecache.c:440
...with a stack trace showing nfsd_file_put being called from
nfs4_show_open. This code has always tried to call fput while holding a
spinlock, but we recently changed this to use the filecache, and that
started triggering the might_sleep() in nfsd_file_put.
states_start takes and holds the cl_lock while iterating over the
client's states, and we can't sleep with that held.
Have the various nfs4_show_* functions instead hold the fi_lock instead
of taking a nfsd_file reference.
Fixes: 78599c42ae ("nfsd4: add file to display list of client's opens")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2138357
Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5021e911 ]
The xdr_stream conversion inadvertently left some code that set the
page_len of the send buffer. The XDR stream encoders should handle
this automatically now.
This oversight adds garbage past the end of the Reply message.
Clients typically ignore the garbage, but NFSD does not need to send
it, as it leaks stale memory contents onto the wire.
Fixes: f8cba47344 ("NFSD: Update the NFSv2 GETACL result encoder to use struct xdr_stream")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7b839d47 ]
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./fs/nfsd/nfs2acl.c:289:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_accessres' with return type bool
./fs/nfsd/nfs2acl.c:252:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_getaclres' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: ea5021e911 ("NFSD: Finish converting the NFSv2 GETACL result encoder")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9ee20c85b ]
gic_probe() calls pm_runtime_get_sync() and added fail path as
rpm_put to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 9c8edddfc9 ("irqchip/gic: Add platform driver for non-root GICs that require RPM")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4748f9687c ]
In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().
Fixes: 1dd7128b83 ("thermal/core: Fix null pointer dereference in thermal_release()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2d966236 ]
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed.
Fixes: ec2daf6e33 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221117080823.77549-1-yuancan@huawei.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c508eb042d ]
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break the loop in sad_cfg_iio_topology() with 'dev' not NULL. We
need to call pci_dev_put() to decrease the reference count. Since
pci_dev_put() can handle the NULL input parameter, we can just add one
pci_dev_put() right before 'return ret'.
Fixes: c1777be364 ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-2-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 110d7b0325 ]
After commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
move dev_set_name() after pnp_add_id() to avoid memory leak.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93924267f ]
Add checking of the test return value, otherwise it will report success
forever for test_create_read().
Fixes: dff6d2ae56 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5ed1fe080 ]
dev_set_name() allocates memory for name, it need be freed
when module exiting, call put_device() to give up reference,
so that it can be freed in kobject_cleanup() when the refcount
hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().
Fixes: 17a1d523aa ("MIPS: APRP: Add VPE loader support for CMP platforms.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
