It's optional, so, do nothing when this gpio-irq omitted.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: If82c6ef3610aa47e1be3266b485305514bb1717d
RK3588 VOP2 has power gates for VP0/1/2/3, DB0/1/2
and WB.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: Ie3d67aa804282834949d6950470ba960ea51fcdb
This patch sets the maximum speed to high speed for
USB 3.0 OTG on rk3588 and rk3588s evbs. It's used to
support USB 2.0 ADB during bring up stage.
In the future, if the USB 3.0 PHY driver is ready, we
can revert this patch.
Change-Id: I654894a894e38c39104dc6efe0446867f6894b7b
Signed-off-by: William Wu <william.wu@rock-chips.com>
We should avoid rolling the phases if 270 and 0 is both
fine in tuning. Otherwise it would chose a middle phase
laid later than 270 which isn't a good.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 8d0e882790 ("mmc: dw_mmc-rockchip: Skip all phases bigger than 270 degrees")
Change-Id: I87bd3e957623d6a5fdf38226be65564e353b01b6
slot's clock is cached before calling ->set_ios for sub-driver.
If the clock is updated by sub-driver, it's better to restore
the cached slot's clock. Or we can see a unexpected clock as the
driver didn't know the slot's clock is updated and still use the
old clock to calculate divider. So we may see a lower clock. It
theory, it's won't be a problem because any rate lower than 400k
should be fine, and we even didn't start issuing any command during
the lower clock. But still it's right to update slot's clock to reflect
the correct clock and may fix some potential unknown problems.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I06581320547bb06c306da57e141d06f9206ea585
This is a 8K(vp0+vp1) + 4K(vp2) + 2K(vp3) plane-mask.
This will be used before u-boot logo is ready.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: Ibbac678ec0e1023073e8d44854990bf6027118b3
It isn't sticky when link goes down for whatever reason.
If devices want to reset the modules by puting link into D3
state or whatever, we should restore it the. Otherwise devices
cannot access RC's resource even if the link is recovered.
Change-Id: Ie5b5a0b7f6ab03961658b4217c9db2cada0edb93
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Simon Xue <xxm@rock-chips.com>
It's found a new r8169 ethernet card with a device ID of
0x0000 read from its config header which wasn't in the
ID tables of r8169. Add it in order to probe this card.
Change-Id: I27c542a10cc571a6e1a4e7a8af62ce560b8b1fc4
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Add property to transfer next hdr sink data to userspace.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Change-Id: I926ec6553bdb0b1730a7ca578f46f36926860ebd
To be compatible with GKI, we parse the edid next hdr information
in rockchup-drm driver.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Change-Id: Id6fd8f2d8429b07472c6562c223ae84262952e8d
To support the rk3588 dsc function, add get edid dsc
info interface.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Change-Id: I33cc4b60183484e7cd15b519cec4c32d7be53deb
To be compatible with GKI, we parse the edid dsc information
in rockchup-drm driver.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Change-Id: I2f2cc9e9fe8578865975e1631450dbbc723ce08e
