Zheng Yang
ab49eaa2e0
rk30 hdmi:
...
1. Need not take tmds_clk pull up to 3.3V as a hdmi connection condition.
2. When parse unkown edid extensions, return false and set it as a hdmi sink.
2012-08-16 17:45:11 +08:00
chenxing
b514287dc9
rk30:sdk: dvfs add err info when current voltage out of bound
2012-08-15 18:39:11 +08:00
lw
532d0404a8
phonepad:uart0 support 1-3Mbps baud rate
2012-08-15 17:01:33 +08:00
lw
0c3cb26b93
phonepad:set ddr frequency 300M
2012-08-15 15:15:54 +08:00
lw
e0c50d1303
phonepad:delete lpsensor item because of i2c address conflict
2012-08-15 14:35:16 +08:00
lw@rock-chips.com
ba15610480
sensor:add gsensor disable irq operation
2012-08-15 11:53:26 +08:00
宋秀杰
d06d84962d
phonepad: change record route, must update asound.conf.
2012-08-14 22:51:49 +08:00
xxx
e9e26116cf
uart support 1m or 3M
2014-12-08 21:03:27 -08:00
lw
3e38132b62
phonepad:select all sensor items and modify orientation
2012-08-14 20:44:58 +08:00
xxx
6bcf52d724
add video_state function which can reduce reset ddr rate when playing video
2012-08-13 21:18:13 -07:00
黄涛
1fb22447a5
rk30: cru: fix typo, PEIRPH -> PERIPH
2012-08-14 17:31:17 +08:00
宋秀杰
54a19342c7
phonepad: fix record can not work bug.
2012-08-14 17:04:01 +08:00
张晴
20a1e646de
rk30:sdk:support pwm set voltage
2012-08-14 16:34:41 +08:00
张晴
afaf51341f
rk30:Compatib with wm8326tps65910 and discrete dcdc
2012-08-14 16:11:16 +08:00
ddl
4b85058960
camera rk30: fix struct rk_camera_work may be reentrant,version update to v0.2.11, and add support sp2518 sensor
2012-08-14 15:11:36 +08:00
hhb
5c79ff3b98
dma memcpy test:add dam thread number from 2 to 8
2012-08-13 17:56:26 +08:00
lw
cee1ab8448
phonepad:modify sdmmc gpio definition for phonepad
2012-08-13 13:03:43 +08:00
lw
da1e33bfb7
phonepad:add mt6620 support for phonepad board
2012-08-13 12:07:38 +08:00
xbw
2ecaebc366
SDMMC:
...
No essential changes, just to simplify the code submitted.
continue with the previous commit 3b4d3302d6
2012-08-12 14:38:27 +08:00
xbw
b4d6da95b6
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
2012-08-12 13:33:05 +08:00
xbw
3b4d3302d6
SDMMC: add the power-off after closing of removing the card
2012-08-12 13:31:11 +08:00
xbw
20a22cc9d4
SDMMC: add the power-off after closing of removing the card
2012-08-12 13:20:07 +08:00
ddl
68f440aa8b
camera rk30: fix calculate ipp memory size is enough or not in try_fmt function, version update to v0.2.f
2012-08-11 16:15:47 +08:00
xbw
0e6ec11f61
sdmmc: mask the SD Ver3.0 supported
2012-08-11 12:51:47 +08:00
张晴
4ee78b7e3d
rk30:phonepad:clear rtc status when enter sleep
2012-08-11 12:13:15 +08:00
lw@rock-chips.com
3e43263500
phonepad:fix alarm lose intterupt problem
2012-08-11 11:37:55 +08:00
张晴
6eb300d28f
rk30:phone:Solve the power button interrupt failure
2012-08-11 10:05:07 +08:00
许盛飞
5808110c43
rk30:auto-dimming function about light-sensor and backlight-curve
2012-08-10 15:58:43 +08:00
宋秀杰
08f419f626
phonepad: rt3261 add main mic and headset mic mute controls, add a solution for the speaker destroyed when playback.
2012-08-10 15:20:43 +08:00
宋秀杰
9c85cb1d28
phonepad: solve "assignment from incompatible pointer type" warning in codec driver.
2012-08-10 14:35:51 +08:00
xbw
ddb1decf73
add MTK-combo-module,continue with commit 17f39ed917
2012-08-10 14:27:55 +08:00
xbw
17f39ed917
add MTK-combo-module
2012-08-10 14:02:20 +08:00
xbw
a2809576ee
sdmmc: continue with commit b479d89814.
2012-08-10 13:58:23 +08:00
xbw
4644fe5e5b
revert the mach-rk30-Makefie. commit error in b479d89814
2012-08-10 12:31:57 +08:00
xbw
b479d89814
SDMMC:
...
1、modify the bug,some High speed card run in low speed.
2、fix the crash,due to the sdmmc interrupt occur during the machine power-on.
3、fix the crash, due to the Timeout timer and interrupt at the same time to.
4. add the sdio-INT from gpio interrupt for wake-up host.
5. add the CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC for combo-module.
2012-08-10 11:09:32 +08:00
宋秀杰
1212dde6b8
phonepad: rk29_rt3261.c set BT incall clock.
2012-08-10 10:26:17 +08:00
张晴
7bbcfdf7f1
rk30:phonepad:Remove debug print
2012-08-09 18:42:58 +08:00
hhb
34e285616f
add dma pl330 memcpy test
2012-08-09 18:36:47 +08:00
张晴
b50c4c8955
rk30:phonepad:open codec powerdomain when pmu enter sleep
2012-08-09 18:32:39 +08:00
张晴
8cbbc34b0b
rk30:phonepad:modify vdd_cpu(arm voltage) when resume
2012-08-09 18:30:00 +08:00
hhb
68e8ac6ea5
rk_serial: update serial driver
2012-08-09 18:25:20 +08:00
许盛飞
032cf430a7
rk30phonepad: step down the voltage of VDD_LOG
2012-08-09 17:39:00 +08:00
lw
90243aa8ca
phonepad:add CONFIG_RK30_I2C_INSRAM
2012-08-09 17:35:21 +08:00
lw
5df44a542d
phonepad:add suspend and resume voltage setting function
2012-08-09 16:27:14 +08:00
张晴
e5d9f10ca3
rk30:phonepad:support i2c transmission in sram
2012-08-08 17:01:21 +08:00
hzf
96ceebb48f
phone_pad:set headset in level is low
2012-08-08 16:22:27 +08:00
lw
d05eca05cf
rk30_phone:select all sensor items
2012-08-08 15:37:33 +08:00
lw
7f9c327eea
rk30sdk:select all sensor items
2012-08-08 15:16:23 +08:00
lw@rock-chips.com
3403ddf5b2
modify sensors driver to support selecting all items one time
2012-08-08 14:59:54 +08:00
zwp
47bec5f329
phonepad:
...
1.add power detection using adc.
2.add Battery charging Icon displaying.
2012-08-07 18:13:44 +08:00