From: Dylan Yudaken <dylany@meta.com>
[ upstream commit c06c6c5d27 ]
This is required for the failure case (io_req_complete_failed) and is
missing.
The alternative would be to only lock in the failure path, however all of
the non-error paths in io_poll_check_events that do not do not return
IOU_POLL_NO_ACTION end up locking anyway. The only extraneous lock would
be for the multishot poll overflowing the CQE ring, however multishot poll
would probably benefit from being locked as it will allow completions to
be batched.
So it seems reasonable to lock always.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-3-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 669281ee7e upstream.
MGLRU has a LRU list for each zone for each type (anon/file) in each
generation:
long nr_pages[MAX_NR_GENS][ANON_AND_FILE][MAX_NR_ZONES];
The min_seq (oldest generation) can progress independently for each
type but the max_seq (youngest generation) is shared for both anon and
file. This is to maintain a common frame of reference.
In order for eviction to advance the min_seq of a type, all the per-zone
lists in the oldest generation of that type must be empty.
The eviction logic only considers pages from eligible zones for
eviction or promotion.
scan_folios() {
...
for (zone = sc->reclaim_idx; zone >= 0; zone--) {
...
sort_folio(); // Promote
...
isolate_folio(); // Evict
}
...
}
Consider the system has the movable zone configured and default 4
generations. The current state of the system is as shown below
(only illustrating one type for simplicity):
Type: ANON
Zone DMA32 Normal Movable Device
Gen 0 0 0 4GB 0
Gen 1 0 1GB 1MB 0
Gen 2 1MB 4GB 1MB 0
Gen 3 1MB 1MB 1MB 0
Now consider there is a GFP_KERNEL allocation request (eligible zone
index <= Normal), evict_folios() will return without doing any work
since there are no pages to scan in the eligible zones of the oldest
generation. Reclaim won't make progress until triggered from a ZONE_MOVABLE
allocation request; which may not happen soon if there is a lot of free
memory in the movable zone. This can lead to OOM kills, although there
is 1GB pages in the Normal zone of Gen 1 that we have not yet tried to
reclaim.
This issue is not seen in the conventional active/inactive LRU since
there are no per-zone lists.
If there are no (not enough) folios to scan in the eligible zones, move
folios from ineligible zone (zone_index > reclaim_index) to the next
generation. This allows for the progression of min_seq and reclaiming
from the next generation (Gen 1).
Qualcomm, Mediatek and raspberrypi [1] discovered this issue independently.
[1] https://github.com/raspberrypi/linux/issues/5395
Link: https://lkml.kernel.org/r/20230802025606.346758-1-kaleshsingh@google.com
Fixes: ac35a49023 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5e2151ff9 upstream.
__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db8756
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.
As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.
Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.
Fixes: eb70db8756 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23970a1c94 upstream.
The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cf9d015be upstream.
After commit c28cd1f343 ("clk: Mark a fwnode as initialized when using
CLK_OF_DECLARE() macro"), drivers/clk/mvebu/kirkwood.c fails to build:
drivers/clk/mvebu/kirkwood.c:358:1: error: expected identifier or '('
CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock",
^
include/linux/clk-provider.h:1367:21: note: expanded from macro 'CLK_OF_DECLARE'
static void __init name##_of_clk_init_declare(struct device_node *np) \
^
<scratch space>:124:1: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
C function names must start with either an alphabetic letter or an
underscore. To avoid generating invalid function names from clock names,
add two underscores to the beginning of the identifier.
Fixes: c28cd1f343 ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro")
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230308-clk_of_declare-fix-v1-1-317b741e2532@kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a50d9403f upstream.
When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
[1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c28cd1f343 upstream.
We already mark fwnodes as initialized when they are registered as clock
providers. We do this so that fw_devlink can tell when a clock driver
doesn't use the driver core framework to probe/initialize its device.
This ensures fw_devlink doesn't block the consumers of such a clock
provider indefinitely.
However, some users of CLK_OF_DECLARE() macros don't use the same node
that matches the macro as the node for the clock provider, but they
initialize the entire node. To cover these cases, also mark the nodes
that match the macros as initialized when the init callback function is
called.
An example of this is "stericsson,u8500-clks" that's handled using
CLK_OF_DECLARE() and looks something like this:
clocks {
compatible = "stericsson,u8500-clks";
prcmu_clk: prcmu-clock {
#clock-cells = <1>;
};
prcc_pclk: prcc-periph-clock {
#clock-cells = <2>;
};
prcc_kclk: prcc-kernel-clock {
#clock-cells = <2>;
};
prcc_reset: prcc-reset-controller {
#reset-cells = <2>;
};
...
};
This patch makes sure that "clocks" is marked as initialized so that
fw_devlink knows that all nodes under it have been initialized. If the
driver creates struct devices for some of the subnodes, fw_devlink is
smart enough to know to wait for those devices to probe, so no special
handling is required for those cases.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdamxDX6EBVjKX5=D3rkHp17f5pwGdBVhzFU90-0MHY6dQ@mail.gmail.com/
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20230302014639.297514-1-saravanak@google.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 433279beba upstream.
Commit 3e45352259 ("md: Free resources in __md_stop") tried to fix
null-ptr-deference for 'active_io' by moving percpu_ref_exit() to
__md_stop(), however, the commit also moving 'writes_pending' to
__md_stop(), and this will cause mdadm tests broken:
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37
RIP: 0010:free_percpu+0x465/0x670
Call Trace:
<TASK>
__percpu_ref_exit+0x48/0x70
percpu_ref_exit+0x1a/0x90
__md_stop+0xe9/0x170
do_md_stop+0x1e1/0x7b0
md_ioctl+0x90c/0x1aa0
blkdev_ioctl+0x19b/0x400
vfs_ioctl+0x20/0x50
__x64_sys_ioctl+0xba/0xe0
do_syscall_64+0x6c/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
And the problem can be reporduced 100% by following test:
mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force
echo inactive > /sys/block/md0/md/array_state
echo read-auto > /sys/block/md0/md/array_state
echo inactive > /sys/block/md0/md/array_state
Root cause:
// start raid
raid1_run
mddev_init_writes_pending
percpu_ref_init
// inactive raid
array_state_store
do_md_stop
__md_stop
percpu_ref_exit
// start raid again
array_state_store
do_md_run
raid1_run
mddev_init_writes_pending
if (mddev->writes_pending.percpu_count_ptr)
// won't reinit
// inactive raid again
...
percpu_ref_exit
-> null-ptr-deference
Before the commit, 'writes_pending' is exited when mddev is freed, and
it's safe to restart raid because mddev_init_writes_pending() already make
sure that 'writes_pending' will only be initialized once.
Fix the prblem by moving 'writes_pending' back, it's a litter hard to find
the relationship between alloc memory and free memory, however, code
changes is much less and we lived with this for a long time already.
Fixes: 3e45352259 ("md: Free resources in __md_stop")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 303a780520 upstream.
I found that the read code might send multiple requests using the same
nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is
how we ended up occasionally double-freeing the scratch buffer, but also
means we set a NULL pointer but non-zero length to the xdr scratch
buffer. This results in an oops the first time decoding needs to copy
something to scratch, which frequently happens when decoding READ_PLUS
hole segments.
I fix this by moving scratch handling into the pageio read code. I
provide a function to allocate scratch space for decoding read replies,
and free the scratch buffer when the nfs_pgio_header is freed.
Fixes: fbd2a05f29 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43439d858b upstream.
kfree()-ing the scratch page isn't enough, we also need to set the pointer
back to NULL to avoid a double-free in the case of a resend.
Fixes: fbd2a05f29 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e45352259 upstream.
If md_run() fails after ->active_io is initialized, then percpu_ref_exit
is called in error path. However, later md_free_disk will call
percpu_ref_exit again which leads to a panic because of null pointer
dereference. It can also trigger this bug when resources are initialized
but are freed in error path, then will be freed again in md_free_disk.
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
Workqueue: md_misc mddev_delayed_delete
RIP: 0010:free_percpu+0x110/0x630
Call Trace:
<TASK>
__percpu_ref_exit+0x44/0x70
percpu_ref_exit+0x16/0x90
md_free_disk+0x2f/0x80
disk_release+0x101/0x180
device_release+0x84/0x110
kobject_put+0x12a/0x380
kobject_put+0x160/0x380
mddev_delayed_delete+0x19/0x30
process_one_work+0x269/0x680
worker_thread+0x266/0x640
kthread+0x151/0x1b0
ret_from_fork+0x1f/0x30
For creating raid device, md raid calls do_md_run->md_run, dm raid calls
md_run. We alloc those memory in md_run. For stopping raid device, md raid
calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can
free those memory resources in __md_stop.
Fixes: 72adae23a7 ("md: Change active_io to percpu")
Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d07fa1dd1 upstream.
The pipe cpumask used to serialize opens between the main and percpu
trace pipes is not zeroed or initialized. This can result in
spurious -EBUSY returns if underlying memory is not fully zeroed.
This has been observed by immediate failure to read the main
trace_pipe file on an otherwise newly booted and idle system:
# cat /sys/kernel/debug/tracing/trace_pipe
cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy
Zero the allocation of pipe_cpumask to avoid the problem.
Link: https://lore.kernel.org/linux-trace-kernel/20230831125500.986862-1-bfoster@redhat.com
Cc: stable@vger.kernel.org
Fixes: c2489bb7e6 ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes")
Reviewed-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0499942928 ]
Commit 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.
As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.
Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.
Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).
Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).
When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.
Fixes: 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
Fixes: 21144bab4f ("sc16is7xx: Handle modem status lines")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6f7f984fa8 upstream.
Starting from SPR, the basic uncore PMON information is retrieved from
the discovery table (resides in an MMIO space populated by BIOS). It is
called the discovery method. The existing value of the type->num_boxes
is from the discovery table.
On some SPR variants, there is a firmware bug that makes the value from the
discovery table incorrect. We use the value from the
SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table:
38776cc45e ("perf/x86/uncore: Correct the number of CHAs on SPR")
Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR
XCC (Always returns 0), but the above firmware bug doesn't impact the
EMR XCC.
Don't let the value from the MSR replace the existing value from the
discovery table.
Fixes: 38776cc45e ("perf/x86/uncore: Correct the number of CHAs on SPR")
Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d7d72a34e upstream.
On large enclaves we hit the softlockup warning with following call trace:
xa_erase()
sgx_vepc_release()
__fput()
task_work_run()
do_exit()
The latency issue is similar to the one fixed in:
8795359e35 ("x86/sgx: Silence softlockup detection when releasing large enclaves")
The test system has 64GB of enclave memory, and all is assigned to a single VM.
Release of 'vepc' takes a longer time and causes long latencies, which triggers
the softlockup warning.
Add cond_resched() to give other tasks a chance to run and reduce
latencies, which also avoids the softlockup detector.
[ mingo: Rewrote the changelog. ]
Fixes: 540745ddbc ("x86/sgx: Introduce virtual EPC for use by KVM guests")
Reported-by: Yu Zhang <yu.zhang@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yu Zhang <yu.zhang@ionos.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Haitao Huang <haitao.huang@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59cf445754 upstream.
Commit 85d07c5562 ("USB: core: Unite old scheme and new scheme
descriptor reads") altered the way USB devices are enumerated
following detection, and in the process it messed up the
initialization of SuperSpeed (or faster) devices:
[ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 31.663107] usb 2-1: device descriptor read/8, error -71
[ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[ 31.965122] usb 2-1: device descriptor read/8, error -71
[ 32.080991] usb usb2-port1: attempt power cycle
...
The problem was caused by the commit forgetting that in SuperSpeed or
faster devices, the device descriptor uses a logarithmic encoding of
the bMaxPacketSize0 value. (For some reason I thought the 255 case in
the switch statement was meant for these devices, but it isn't -- it
was meant for Wireless USB and is no longer needed.)
We can fix the oversight by testing for buf->bMaxPacketSize0 = 9
(meaning 512, the actual maxpacket size for ep0 on all SuperSpeed
devices) and straightening out the logic that checks and adjusts our
initial guesses of the maxpacket value.
Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 85d07c5562 ("USB: core: Unite old scheme and new scheme descriptor reads")
Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff33299ec8 upstream.
Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors():
BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011
CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
...
Allocated by task 758:
...
__do_kmalloc_node mm/slab_common.c:966 [inline]
__kmalloc+0x5e/0x190 mm/slab_common.c:979
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:680 [inline]
usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887
usb_enumerate_device drivers/usb/core/hub.c:2407 [inline]
usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545
As analyzed by Khazhy Kumykov, the cause of this bug is a race between
read_descriptors() and hub_port_init(): The first routine uses a field
in udev->descriptor, not expecting it to change, while the second
overwrites it.
Prior to commit 45bf39f8df ("USB: core: Don't hold device lock while
reading the "descriptors" sysfs file") this race couldn't occur,
because the routines were mutually exclusive thanks to the device
locking. Removing that locking from read_descriptors() exposed it to
the race.
The best way to fix the bug is to keep hub_port_init() from changing
udev->descriptor once udev has been initialized and registered.
Drivers expect the descriptors stored in the kernel to be immutable;
we should not undermine this expectation. In fact, this change should
have been made long ago.
So now hub_port_init() will take an additional argument, specifying a
buffer in which to store the device descriptor it reads. (If udev has
not yet been initialized, the buffer pointer will be NULL and then
hub_port_init() will store the device descriptor in udev as before.)
This eliminates the data race responsible for the out-of-bounds read.
The changes to hub_port_init() appear more extensive than they really
are, because of indentation changes resulting from an attempt to avoid
writing to other parts of the usb_device structure after it has been
initialized. Similar changes should be made to the code that reads
the BOS descriptor, but that can be handled in a separate patch later
on. This patch is sufficient to fix the bug found by syzbot.
Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Khazhy Kumykov <khazhy@google.com>
Fixes: 45bf39f8df ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de28e469da upstream.
The usb_get_device_descriptor() routine reads the device descriptor
from the udev device and stores it directly in udev->descriptor. This
interface is error prone, because the USB subsystem expects in-memory
copies of a device's descriptors to be immutable once the device has
been initialized.
The interface is changed so that the device descriptor is left in a
kmalloc-ed buffer, not copied into the usb_device structure. A
pointer to the buffer is returned to the caller, who is then
responsible for kfree-ing it. The corresponding changes needed in the
various callers are fairly small.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/d0111bb6-56c1-4f90-adf2-6cfe152f6561@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85d07c5562 upstream.
In preparation for reworking the usb_get_device_descriptor() routine,
it is desirable to unite the two different code paths responsible for
initially determining endpoint 0's maximum packet size in a newly
discovered USB device. Making this determination presents a
chicken-and-egg sort of problem, in that the only way to learn the
maxpacket value is to get it from the device descriptor retrieved from
the device, but communicating with the device to retrieve a descriptor
requires us to know beforehand the ep0 maxpacket size.
In practice this problem is solved in two different ways, referred to
in hub.c as the "old scheme" and the "new scheme". The old scheme
(which is the approach recommended by the USB-2 spec) involves asking
the device to send just the first eight bytes of its device
descriptor. Such a transfer uses packets containing no more than
eight bytes each, and every USB device must have an ep0 maxpacket size
>= 8, so this should succeed. Since the bMaxPacketSize0 field of the
device descriptor lies within the first eight bytes, this is all we
need.
The new scheme is an imitation of the technique used in an early
Windows USB implementation, giving it the happy advantage of working
with a wide variety of devices (some of them at the time would not
work with the old scheme, although that's probably less true now). It
involves making an initial guess of the ep0 maxpacket size, asking the
device to send up to 64 bytes worth of its device descriptor (which is
only 18 bytes long), and then resetting the device to clear any error
condition that might have resulted from the guess being wrong. The
initial guess is determined by the connection speed; it should be
correct in all cases other than full speed, for which the allowed
values are 8, 16, 32, and 64 (in this case the initial guess is 64).
The reason for this patch is that the old- and new-scheme parts of
hub_port_init() use different code paths, one involving
usb_get_device_descriptor() and one not, for their initial reads of
the device descriptor. Since these reads have essentially the same
purpose and are made under essentially the same circumstances, this is
illogical. It makes more sense to have both of them use a common
subroutine.
This subroutine does basically what the new scheme's code did, because
that approach is more general than the one used by the old scheme. It
only needs to know how many bytes to transfer and whether or not it is
being called for the first iteration of a retry loop (in case of
certain time-out errors). There are two main differences from the
former code:
We initialize the bDescriptorType field of the transfer buffer
to 0 before performing the transfer, to avoid possibly
accessing an uninitialized value afterward.
We read the device descriptor into a temporary buffer rather
than storing it directly into udev->descriptor, which the old
scheme implementation used to do.
Since the whole point of this first read of the device descriptor is
to determine the bMaxPacketSize0 value, that is what the new routine
returns (or an error code). The value is stored in a local variable
rather than in udev->descriptor. As a side effect, this necessitates
moving a section of code that checks the bcdUSB field for SuperSpeed
devices until after the full device descriptor has been retrieved.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/495cb5d4-f956-4f4a-a875-1e67e9489510@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f236433064 upstream.
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c97cd0b4b5 upstream.
When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.
NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."
Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."
Fixes: c34e85fa69 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e520d0b6be upstream.
Allocate extra space for terminating element at:
drivers/cpufreq/brcmstb-avs-cpufreq.c:
449 table[i].frequency = CPUFREQ_TABLE_END;
and add code comment to make this clear.
This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
449 | table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/cpufreq.h:12,
from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
323 | return devm_kmalloc(dev, bytes, flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9c83f71ee upstream.
We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.
Fixes : 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7cf224246 upstream.
Building dasd_eckd.o with latest clang reveals this bug:
CC drivers/s390/block/dasd_eckd.o
drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 11 [-Wfortify-source]
1082 | snprintf(print_uid, sizeof(*print_uid),
| ^
drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 10 [-Wfortify-source]
1087 | snprintf(print_uid, sizeof(*print_uid),
| ^
Fix this by moving and using the existing UID_STRLEN for the arrays
that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN
to clarify its scope.
Fixes: 23596961b4 ("s390/dasd: split up dasd_eckd_read_conf")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1923
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea5717cb13 upstream.
OS installers are relying on /sys/firmware/ipl/has_secure to be
present on machines supporting secure boot. This file is present
for all IPL types, but not the unknown type, which prevents a secure
installation when an LPAR is booted in HMC via FTP(s), because
this is an unknown IPL type in linux. While at it, also add the secure
file.
Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8f40a0bcc upstream.
Commit fb08a1908c ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().
For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.
This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().
Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.
Fixes: fb08a1908c ("dax: simplify the dax_device <-> gendisk association")
Cc: <stable@vger.kernel.org> # 5.17+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cd474e573 upstream.
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.
Fixes: f5df269618 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe8c3623ab upstream.
After commit 30696378f6 ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:
sysdump_panic_event+0x3b4/0x5b8
atomic_notifier_call_chain+0x54/0x90
panic+0x1c8/0x42c
die+0x29c/0x2a8
die_kernel_fault+0x68/0x78
__do_kernel_fault+0x1c4/0x1e0
do_bad_area+0x40/0x100
do_translation_fault+0x68/0x80
do_mem_abort+0x68/0xf8
el1_da+0x1c/0xc0
__raw_writeb+0x38/0x174
__memcpy_toio+0x40/0xac
persistent_ram_update+0x44/0x12c
persistent_ram_write+0x1a8/0x1b8
ramoops_pstore_write+0x198/0x1e8
pstore_console_write+0x94/0xe0
...
To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.
Fixes: 30696378f6 ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4240e2ebe6 upstream.
The Instruction Fetch (IF) units on current AMD Zen-based systems do not
guarantee a synchronous #MC is delivered for poison consumption errors.
Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the
microarchitecture does guarantee that the exception is delivered within
the same context. In other words, the exact rIP is not known, but the
context is known to not have changed.
There is no architecturally-defined method to determine this behavior.
The Code Segment (CS) register is always valid on such IF unit poison
errors regardless of the value of MCG_STATUS[EIPV|RIPV].
Add a quirk to save the CS register for poison consumption from the IF
unit banks.
This is needed to properly determine the context of the error.
Otherwise, the severity grading function will assume the context is
IN_KERNEL due to the m->cs value being 0 (the initialized value). This
leads to unnecessary kernel panics on data poison errors due to the
kernel believing the poison consumption occurred in kernel context.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230814200853.29258-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 919dc32095 upstream.
If an fsverity builtin signature is given for a file but the
".fs-verity" keyring is empty, there's no real reason to run the PKCS#7
parser. Skip this to avoid the PKCS#7 attack surface when builtin
signature support is configured into the kernel but is not being used.
This is a hardening improvement, not a fix per se, but I've added
Fixes and Cc stable to get it out to more users.
Fixes: 432434c9f8 ("fs-verity: support builtin file signatures")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230820173237.2579-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef5b52a631 upstream.
When the hash algorithm for the signature is not available the digest size
is 0 and the signature in the certificate is marked as unsupported.
When validating a self-signed certificate, this needs to be checked,
because otherwise trying to validate the signature will fail with an
warning:
Loading compiled-in X.509 certificates
WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \
pkcs1pad_verify+0x46/0x12c
...
Problem loading in-kernel X.509 certificate (-22)
Signed-off-by: Thore Sommer <public@thson.de>
Cc: stable@vger.kernel.org # v4.7+
Fixes: 6c2dc5ae4a ("X.509: Extract signature digest and make self-signed cert checks earlier")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 977ad86c2a upstream.
There was a previous attempt to fix an out-of-bounds access in the DCCP
error handlers, but that fix assumed that the error handlers only want
to access the first 8 bytes of the DCCP header. Actually, they also look
at the DCCP sequence number, which is stored beyond 8 bytes, so an
explicit pskb_may_pull() is required.
Fixes: 6706a97fec ("dccp: fix out of bound access in dccp_v4_err()")
Fixes: 1aa9d1a0e7 ("ipv6: dccp: fix out of bound access in dccp_v6_err()")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c53e847ff upstream.
All posix lock ops, for all lockspaces (gfs2 file systems) are
sent to userspace (dlm_controld) through a single misc device.
The dlm_controld daemon reads the ops from the misc device
and sends them to other cluster nodes using separate, per-lockspace
cluster api communication channels. The ops for a single lockspace
are ordered at this level, so that the results are received in
the same sequence that the requests were sent. When the results
are sent back to the kernel via the misc device, they are again
funneled through the single misc device for all lockspaces. When
the dlm code in the kernel processes the results from the misc
device, these results will be returned in the same sequence that
the requests were sent, on a per-lockspace basis. A recent change
in this request/reply matching code missed the "per-lockspace"
check (fsid comparison) when matching request and reply, so replies
could be incorrectly matched to requests from other lockspaces.
Cc: stable@vger.kernel.org
Reported-by: Barry Marson <bmarson@redhat.com>
Fixes: 57e2c2f2d9 ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72105dcfa3 upstream.
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.
Cc: stable@vger.kernel.org # 6.1+
Fixes: f949039961 ("drm/amd/display: Add DCN315 CLK_MGR")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5ba4b3e1 upstream.
The lscpu command is broken since commit cab56b51ec ("parisc: Fix
device names in /proc/iomem") added the PA pathname to all PA
devices, includig the CPUs.
lscpu parses /proc/cpuinfo and now believes it found different CPU
types since every CPU is listed with an unique identifier (PA
pathname).
Fix this problem by simply dropping the PA pathname when listing the
CPUs in /proc/cpuinfo. There is no need to show the pathname in this
procfs file.
Fixes: cab56b51ec ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccf61486fe upstream.
Due to an oversight in commit 1b3044e39a ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
chmod operations on /proc/thread-self/comm were no longer blocked as
they are on almost all other procfs files.
A very similar situation with /proc/self/environ was used to as a root
exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a
correctness issue.
Ref: https://lwn.net/Articles/191954/
Ref: 6d76fa58b0 ("Don't allow chmod() on the /proc/<pid>/ files")
Fixes: 1b3044e39a ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230713141001.27046-1-cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a721de848 upstream.
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
