commit aea835f2dc upstream.
When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc1b453262 upstream.
When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3fa21c73c upstream.
Leaving for_each_child_of_node loop we should release child device node,
if it is not stored for future use.
Found by Linux Driver Verification project (linuxtesting.org).
JC: I'm not sending this as a quick fix as it's been wrong for years,
but good to pick up for stable after the merge window.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 6df2e98c3e ("iio: adc: Add imx25-gcq ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8911a43bc1 upstream.
The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.
For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da5a3ce66b upstream.
At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.
Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.
Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.
Cc: Christopher Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 1e947bad0b ("arm64: KVM: Skip HYP setup when already running in HYP")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd2ef35828 upstream.
PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.
Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22146c3ce9 upstream.
Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts. This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.
This can be recreated as follows:
fallocate -l 2M /dev/hugepages/foo
echo 1 > /proc/sys/vm/drop_caches
fallocate -l 2M /dev/hugepages/foo
grep -i huge /proc/meminfo
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
HugePages_Total: 2048
HugePages_Free: 2047
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
ls -lsh /dev/hugepages/foo
4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo
To address this issue, dirty pages as they are added to pagecache. This
can easily be reproduced with fallocate as shown above. Read faulted
pages will eventually end up being marked dirty. But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.
Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com
Fixes: 6bda666a03 ("hugepages: fold find_or_alloc_pages into huge_no_page()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mihcla Hocko <mhocko@suse.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a408e4a86b upstream.
Open a new file instance as opposed to changing file->f_mode when
the file is not readable. This is done to accomodate overlayfs
stacked file operations change. The real struct file is hidden
behind the overlays struct file. So, any file->f_mode manipulations are
not reflected on the real struct file. Open the file again in read mode
if original file cannot be read, read and calculate the hash.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: stable@vger.kernel.org (linux-4.19)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a34e3c2f2 upstream.
Use the correct __le32 annotation and accessors to perform the
single round of AES encryption performed inside the AEGIS transform.
Otherwise, tcrypt reports:
alg: aead: Test 1 failed on encryption for aegis128-generic
00000000: 6c 25 25 4a 3c 10 1d 27 2b c1 d4 84 9a ef 7f 6e
alg: aead: Test 1 failed on encryption for aegis128l-generic
00000000: cd c6 e3 b8 a0 70 9d 8e c2 4f 6f fe 71 42 df 28
alg: aead: Test 1 failed on encryption for aegis256-generic
00000000: aa ed 07 b1 96 1d e9 e6 f2 ed b5 8e 1c 5f dc 1c
Fixes: f606a88e58 ("crypto: aegis - Add generic AEGIS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a8dedfa32 upstream.
Omit the endian swabbing when folding the lengths of the assoc and
crypt input buffers into the state to finalize the tag. This is not
necessary given that the memory representation of the state is in
machine native endianness already.
This fixes an error reported by tcrypt running on a big endian system:
alg: aead: Test 2 failed on encryption for morus640-generic
00000000: a8 30 ef fb e6 26 eb 23 b0 87 dd 98 57 f3 e1 4b
00000010: 21
alg: aead: Test 2 failed on encryption for morus1280-generic
00000000: 88 19 1b fb 1c 29 49 0e ee 82 2f cb 97 a6 a5 ee
00000010: 5f
Fixes: 396be41f16 ("crypto: morus - Add generic MORUS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a788848116 upstream.
This patch fixes gcmaes_crypt_by_sg so that it won't use memory
allocation if the data doesn't cross a page boundary.
Authenticated encryption may be used by dm-crypt. If the encryption or
decryption fails, it would result in I/O error and filesystem corruption.
The function gcmaes_crypt_by_sg is using GFP_ATOMIC allocation that can
fail anytime. This patch fixes the logic so that it won't attempt the
failing allocation if the data doesn't cross a page boundary.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbe1a850b3 upstream.
When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).
Fixes: 64470f1b85 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <stable@vger.kernel.org> # 2.6.20+
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a36700589b upstream.
While fixing an out of bounds array access in known_siginfo_layout
reported by the kernel test robot it became apparent that the same bug
exists in siginfo_layout and affects copy_siginfo_from_user32.
The straight forward fix that makes guards against making this mistake
in the future and should keep the code size small is to just take an
unsigned signal number instead of a signed signal number, as I did to
fix known_siginfo_layout.
Cc: stable@vger.kernel.org
Fixes: cc731525f2 ("signal: Remove kernel interal si_code magic")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ab93e9c99 upstream.
The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another. It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates. Neither of which are
guaranteed to be true.
Therefore replace caching the task_struct of the opener with
pid of the openers thread group id. All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.
Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.
The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess
will be killed just with less work, and less confusion. The work done
by force_sig is really only needed for handling syncrhonous
exceptions.
It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.
Fixes: eaf4722d46 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0c9606b31 upstream.
Add Device IDs to the Intel GPU "spurious interrupt" quirk table.
For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD. Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.
The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.
See f67fd55fa9 ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.
[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU. I hope
this is the last patch to add device IDs.]
Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aeae4f3e5c upstream.
Upon removal of the last device on a bus, the link_state of the bridge
leading to that bus is sought to be torn down by having pci_stop_dev()
call pcie_aspm_exit_link_state().
When ASPM was originally introduced by commit 7d715a6c1a ("PCI: add
PCI Express ASPM support"), it determined whether the device being
removed is the last one by calling list_empty() on the bridge's
subordinate devices list. That didn't work because the device is only
removed from the list slightly later in pci_destroy_dev().
Commit 3419c75e15 ("PCI: properly clean up ASPM link state on device
remove") attempted to fix it by calling list_is_last(), but that's not
correct either because it checks whether the device is at the *end* of
the list, not whether it's the last one *left* in the list. If the user
removes the device which happens to be at the end of the list via sysfs
but other devices are preceding the device in the list, the link_state
is torn down prematurely.
The real fix is to move the invocation of pcie_aspm_exit_link_state() to
pci_destroy_dev() and reinstate the call to list_empty(). Remove a
duplicate check for dev->bus->self because pcie_aspm_exit_link_state()
already contains an identical check.
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: stable@vger.kernel.org # v2.6.26
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d0af44a82 upstream.
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.
Fixes: d23f3839fe ("ARM: dts: DRA7: Add pcie1 dt node for EP mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f11274396a upstream.
uref->usage_index can be indirectly controlled by userspace, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This field is used as an array index by the hiddev_ioctl_usage() function,
when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or
HIDIOCSUSAGES.
For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to
field->maxusage and then used as an index to dereference field->usage
array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where
uref->usage_index is checked against an array maximum value and then it is
used as an index in an array.
This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the
traditional Spectre V1 first load:
copy_from_user(uref, user_arg, sizeof(*uref))
if (uref->usage_index >= field->maxusage)
goto inval;
i = field->usage[uref->usage_index].collection_index;
return i;
This patch fixes this by sanitizing field uref->usage_index before using it
to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in
HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load.
Cc: <stable@vger.kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
v2: Contemplate cmd == HIDIOC{G,S}USAGES case
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11db8173db upstream.
The DTK-2451 and DTH-2452 have a buggy HID descriptor which incorrectly
contains a Cintiq-like report, complete with pen tilt, rotation, twist, serial
number, etc. The hardware doesn't actually support this data but our driver
duitifully sets up the device as though it does. To ensure userspace has a
correct view of devices without updated firmware, we clean up this incorrect
data in wacom_setup_device_quirks.
We're also careful to clear the WACOM_QUIRK_TOOLSERIAL flag since its presence
causes the driver to wait for serial number information (via
wacom_wac_pen_serial_enforce) that never comes, resulting in
the pen being non-responsive.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 8341720642 ("HID: wacom: Queue events with missing type/serial data for later processing")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bb185edb0 upstream.
commit 901ef845fa ("selinux: allow per-file labeling for cgroupfs")
broke mounting of cgroup2 under older SELinux policies which lacked
a genfscon rule for cgroup2. This prevents mounting of cgroup2 even
when SELinux is permissive.
Change the handling when there is no genfscon rule in policy to
just mark the inode unlabeled and not return an error to the caller.
This permits mounting and access if allowed by policy, e.g. to
unconfined domains.
I also considered changing the behavior of security_genfs_sid() to
never return -ENOENT, but the current behavior is relied upon by
other callers to perform caller-specific handling.
Fixes: 901ef845fa ("selinux: allow per-file labeling for cgroupfs")
CC: <stable@vger.kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 182a79e0c1 upstream.
We return most failure of dquota_initialize() except
inode evict, this could make a bit sense, for example
we allow file removal even quota files are broken?
But it dosen't make sense to allow setting project
if quota files etc are broken.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7ac6c4ca upstream.
Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.
This patch try to follow same regular of xfs project
quota:
"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."
Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock, ext4_ioctl_setproject() is only used for
ioctl EXT4_IOC_FSSETXATTR, we have held mnt_want_write_file()
before ext4_ioctl_setflags(), and ext4_ioctl_setproject()
is called after ext4_ioctl_setflags(), we could share
codes, so remove it inside ext4_ioctl_setproject().
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 625ef8a3ac upstream.
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18aded1749 upstream.
The code EXT4_IOC_SWAP_BOOT ioctl hasn't been updated in a while, and
it's a bit broken with respect to more modern ext4 kernels, especially
metadata checksums.
Other problems fixed with this commit:
* Don't allow installing a DAX, swap file, or an encrypted file as a
boot loader.
* Respect the immutable and append-only flags.
* Wait until any DIO operations are finished *before* calling
truncate_inode_pages().
* Don't swap inode->i_flags, since these flags have nothing to do with
the inode blocks --- and it will give the IMA/audit code heartburn
when the inode is evicted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reported-by: syzbot+e81ccd4744c6c4f71354@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccd3c4373e upstream.
The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:
CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
__journal_try_to_free_buffer(bh)
...
while (transaction->t_checkpoint_io_list)
...
if (buffer_locked(bh)) {
<-- IO completes now, buffer gets unlocked -->
spin_unlock(&journal->j_list_lock);
spin_lock(&journal->j_list_lock);
__jbd2_journal_remove_checkpoint(jh);
spin_unlock(&journal->j_list_lock);
try_to_free_buffers(page);
get_bh(bh) <-- accesses freed bh
Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.
Fixes: dc6e8d669c ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc61 ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a59739bd0 upstream.
This enum has become part of the uABI, as both RXE and the
ib_uverbs_post_send() command expect userspace to supply values from this
enum. So it should be properly placed in include/uapi/rdma.
In userspace this enum is called 'enum ibv_wr_opcode' as part of
libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV,
IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it
turns out) into libiberbs in 2015.
The kernel has changed its mind on the numbering for several of the IB_WC
values over the years, but has remained stable on IB_WR_LOCAL_INV and
below.
Based on this we can conclude that there is no real user space user of the
values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via
rdma-core. This is confirmed by inspection, only rxe uses the kernel enum
and implements the latter operations. rxe has clearly never worked with
these attributes from userspace. Other drivers that support these opcodes
implement the functionality without calling out to the kernel.
To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we
choose to renumber the IB_WR enum in the kernel to match the uABI that
userspace has bee using since before Soft RoCE was merged. This is an
overall simpler configuration for the whole software stack, and obviously
can't break anything existing.
Reported-by: Seth Howell <seth.howell@intel.com>
Tested-by: Seth Howell <seth.howell@intel.com>
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747df19747 upstream.
The ESD watchdog code in sta32x_watchdog() dereferences the pointer
which is never assigned.
This is a regression from a1be4cead9 ("ASoC: sta32x: Convert to direct
regmap API usage.") which went unnoticed since nobody seems to use that ESD
workaround.
Fixes: a1be4cead9 ("ASoC: sta32x: Convert to direct regmap API usage.")
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d394eee2c upstream.
While experimenting with region driver loading the following backtrace
was triggered:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
[..]
Call Trace:
dump_stack+0x85/0xcb
register_lock_class+0x571/0x580
? __lock_acquire+0x2ba/0x1310
? kernfs_seq_start+0x2a/0x80
__lock_acquire+0xd4/0x1310
? dev_attr_show+0x1c/0x50
? __lock_acquire+0x2ba/0x1310
? kernfs_seq_start+0x2a/0x80
? lock_acquire+0x9e/0x1a0
lock_acquire+0x9e/0x1a0
? dev_attr_show+0x1c/0x50
badblocks_show+0x70/0x190
? dev_attr_show+0x1c/0x50
dev_attr_show+0x1c/0x50
This results from a missing successful call to devm_init_badblocks()
from nd_region_probe(). Block attempts to show badblocks while the
region is not enabled.
Fixes: 6a6bef9042 ("libnvdimm: add mechanism to publish badblocks...")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6eae0f61d upstream.
Unlike asynchronous initialization in the core we have not yet associated
the device with the parent, and as such the device doesn't hold a reference
to the parent.
In order to resolve that we should be holding a reference on the parent
until the asynchronous initialization has completed.
Cc: <stable@vger.kernel.org>
Fixes: 4d88a97aa9 ("libnvdimm: ...base ... infrastructure")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38fe73cc2c upstream.
With the addition of commit 00d909a107 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") in v4.19-rc, it
incorrectly assumes no signals will be pending for task_struct executing the
normal session shutdown and I/O quiesce code-path.
For example, iscsi-target and iser-target issue SIGINT to all kthreads as part
of session shutdown. This has been the behaviour since day one.
As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list,
wait_event_interruptible_lock_irq_timeout() returns a negative number and
immediately kills the machine because of the do while (ret <= 0) loop that was
added in commit 00d909a107 to spin while backend I/O is taking any amount of
extended time (say 30 seconds) to complete.
Here's what it looks like in action with debug plus delayed backend I/O
completion:
[ 4951.909951] se_sess: 000000003e7e08fa before target_wait_for_sess_cmds
[ 4951.914600] target_wait_for_sess_cmds: signal_pending: 1
[ 4951.918015] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 0
[ 4951.921639] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 1
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 2
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 3
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 4
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 5
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 6
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 7
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 8
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 9
... followed by the usual RCU CPU stalls and deadlock.
There was never a case pre commit 00d909a107 where
wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to
address this for v4.19+ moving forward go ahead and use
wait_event_lock_irq_timeout() instead so new code works with all fabric
drivers.
Also for commit 00d909a107, fix a minor regression in
target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only
when shutdown has actually been triggered via se_sess->sess_tearing_down.
Fixes: 00d909a107 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ab0bc334 upstream.
Short of reverting commit 00d909a107 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") for v4.19,
target-core needs a wait_event_t macro can be executed using
TASK_UNINTERRUPTIBLE to function correctly with existing fabric drivers that
expect to run with signals pending during session shutdown and active se_cmd
I/O quiesce.
The most notable is iscsi-target/iser-target, while ibmvscsi_tgt invokes
session shutdown logic from userspace via configfs attribute that could also
potentially have signals pending.
So go ahead and introduce wait_event_lock_irq_timeout() to achieve this, and
update + rename __wait_event_lock_irq_timeout() to make it accept 'state' as a
parameter.
Fixes: 00d909a107 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 076ed3da0c upstream.
commit 40413955ee ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.
Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
