PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: Idfc0be5b394d18799232f6239b3f6c6df9181ce0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: I4aea27f38ebda72cfe77183423600c918b836d7c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-3381
Problem:
vd2 used postblend as default after g12a chip
Solution:
force vd2 using preblend when playing mvc
Verify:
Locally on u212
Change-Id: Ia7fab8ad70ed1e58b7ade241828afab288b94bec
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-3088
Problem:
g12b big-little cluster is different from other SoC with pmu
interrupts and registers.
software modifications must adapt to the difference.
Solution:
modify
Verify:
u200 w400
Change-Id: If9217c1025dff5c17d51790f8c216e31b7d6532b
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-915
Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.
Solution:
close afbc2
Verify:
r321
Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4320
Problem:
The meson8b and arm64_a32 are both selected in Kconfig,
which is quite misleading
Solution:
Disable meson8b when arm64_a32 is selected
Verify:
Locally passed for Ampere
Change-Id: I93f55239ea90bf8cf6b96e108b6fd4a239de32b4
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-3951
Problem:
buffer malloc for dtb may failed
Solution:
malloc may sleep to wait for enough memory
Verify:
pass on p212
Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-4876
Problem:
32bit will operate led-trigger cpu0 in cpu idle enter/exit causing
system led flashing.
Solution:
give up using led-trigger cpu0.
Verify:
g12a_u211 g12a_u212
Change-Id: I106a4fe0e35923919f5bbc34113fa73a4ca28577
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts
PD#SWPL-3359
Problem:
the bt656 clocks were missing
Solution:
1.add bt656 clocks
2.fix several errors for media clocks
Verify:
test passed on u200
Change-Id: Iff69e790c78335930d6b2ea54f7544aca464e1fb
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-85
Problem:
print into level control
Solution:
print into level control
Verify:
U212
Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#SWPL-85
Problem:
Upper layer need control osd and video layer zorder
Solution:
1.Add video layer zorder interface by sysfs and ioctl
2.Switch the osd and video layer order in vsync
Verify:
Verify on U212
Change-Id: Ic50e81784b865cc57e4ab9a63d74806f7a8721cf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-85
Problem:
Need support two video layers feature
Solution:
1.Add vd2 mif config
2.Add vd2 pps calculation and config
3.Add vd2 axis/crop/screen mode interface by sysfs and ioctl
4.Add layer query/alloc/free interface
Verify:
Verify on U212
Change-Id: I71fc9ab2ae0230c3e84c4b790e77d2c790951642
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#172587
Problem:
Add sr driver support for tl1
Solution:
add sr driver support for tl1
fix horizontal line when play video on 4K screen
Verify:
TL1 X301
Change-Id: I422f27eb5cf12f69dc57de295425536671e2df38
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
PD#172587
Problem:
Bringup TL1 vidoe driver.
TL1 need support YUV422/444 AFBC.
TL1 need check afbc source from decode or vdin.
TL1 need afbc compress loss mode.
Solution:
Merge from branch bringup/amlogic-4.9/tl1-20181111.
Verify:
verify on tl1
Change-Id: I0af62e7638db4e1c349df874ccffdeddcaa715af
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-3144
Problem:
The latch function cause the super scaler size asynchronous
Solution:
Disable sr core0 and core1 scaler latch
Verify:
T962x2 x301 board test pass
Change-Id: Iecbcc3e0c751093b6515f7b46973eca2157cd349
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#OTT-2062
Problem:
Boot up time with power cable is longer than boot up with usb cable
Solution:
config hw rng with dts
Verify:
android p + u212
Change-Id: I61613e945dbc9be06f2cbb29aae5043c84fca1de
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
PD# 169839
After do suspend/resume circularly, sometimes ethernet can't recover from
suspend. Add a phy reset when every resume.
Change-Id: Id03223a9c62f4dcab1cdfbc4805cc3b4c0212cf5
Signed-off-by: Shen Liu <shen.liu@amlogic.com>
PD#SWPL-4331
Problem:
Same source clk doesn't recover to 48K
after playback 192k DDP stream.
Solution:
Add ways to recover the clk.
Verify:
Local verified
Change-Id: If410d9ca04446c35bafebe2913b01e19b5fee224
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-5219
Problem:
audio glitch at tdm startup
Solution:
Pad 0 data to clear the remaining data
in the module.
Verify:
Local tested.
Change-Id: Iab526c6893a32030799567b57e05e7bb11b8fea0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-5131
Problem:
Some stream in tunnel mode, first audio pts is large than
AV_DISCONTINUE_THREDHOLD_MAX(60s). In audio_hw it will check pcr and
apts diff, so large difference between pcr and apts will lead sync mode
from amster to vmaster(egg:SYNC-HEVC-59FPS-DDP51)
Solution:
do not operate tsync_mode_switch before first video toggled
Verify:
verify by franklin
Change-Id: Icec2de71ea8f838146444aa3ea880f76ed8e0f13
Signed-off-by: Yingwei Long <yingwei.long@amlogic.com>
PD#SWPL-5113
Problem:
video flash when resolution change from 4K to 640x480
Solution:
temporary solution for video flash for u212
Verify:
verify by u212
Change-Id: I8b7ec009bf599032c7bff5f80b72b557403355da
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-4048
Problem:
video peek can not get first frame toggled on 64bit
Solution:
add the cmd to amvideo_compat_ioctl
Verify:
verify on p212
Change-Id: I6933f305382d636f5f98f4bf19fddcf6ce9471c1
Signed-off-by: Jian Wang <jian.wang@amlogic.com>
PD#SWPL-4079
Problem:
hdr->sdr must have 1.5s delay, when switching from sdr->hdr
the work queue can't be eliminated in time.
Solution:
eliminate the work of sdr effect when choosing hdr
Verify:
u212
Change-Id: I4c1d5467a58253ffa2fa12dfbac7f504d0388a00
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4469
Problem:
dolby files have no sounds after replay
Solution:
in u212, the clk_81 is null when init, it is related
to demux pcr, so add clk_81 to enable demux pcr
Verify:
verify by franklin
Change-Id: Id862e4e8ac49c19bbd52fa6fa4831de20abad6c8
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
PD#SWPL-4177
Problem:
temper buffer size is a fixed value in code
Solution:
config temper buffer size from dts
Verify:
verify by w400
Change-Id: I17ef428221f149a888e0318bc27d7b7d309c00ce
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS
PD#SWPL-4317
Problem:
for video peek, before audio post audio start, video may have rended.
Solution:
do not post video start for video peek, all wait for audio start to
start pcr
Verify:
verify by p212
Change-Id: If5656154e30613164465f84c44d3fd1ee386d654
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-4427
Problem:
a green line displayed when output is yuv420 4k/60hz
Solution:
set dummy data to 0x808000 can fix a green line
displayed when output is yuv420 4k/60hz
Verify:
verify by fanklin
Change-Id: I06125d36c2fb06a61dd072a1789217e7c3705207
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-365
Problem:
System can't use resample function on GVA project.
Solution:
Add resample node in axg_s420_v03gva.dts
Verify:
Passed on s420
Change-Id: Ie48c579e9e9f6e1d61147f5410c95e5bca55b0a7
Signed-off-by: riqun.ou <riqun.ou@amlogic.com>
audio: codecs: fix TL1 reference board volume too small [2/2]
PD#SWPL-2652
Problem:
X301/T309 AMP volume configured to small
Solution:
change the default external AMP codec mixer name to a match
the ini parsing function in audio hal.
TODO: need dynamically check the different codec mixer name
in ini file.
Verify:
verify by x301
Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
audio: codec: the DAC gain set of acodec not work [1/1]
PD#SWPL-3134
Problem:
the DAC gain set is not work
Solution:
update and aml_codec_tl1_acodec.c, change the method of
getting codec pointer from kcontrol pointer.
Verify:
verify by T962x2_X301 board
Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
audio: add tas5805 [1/1]
PD#SWPL-3081
Problem:
compatiable tas5805 module
Solution:
add tas5805 drivers
Verify:
T962X2
Change-Id: I3608e47fe768af0f924751a8bcc103389d0811de
Signed-off-by: Yonghao Jiao <yonghao.jiao@amlogic.com>
audio: auge: add HDMIRX SPDIF in support [1/2]
PD#SWPL-2956
Problem:
HDMI in DTS/Dolby input has noise when treated to LPCM
Solution:
By default,we are using PAO mode for HDMIRX,but we have not
enabled the PaPb search for 61937 raw data input, after add
that, we can detect the raw data, but it can not by clear when
switch from NONE-LPCM to NONE-LPCM, need add IRQ function to
clear that by sw.we enabled spdif in from HDMIRX, which is the same
design as txl/txlx.we can get the Pc information now.
also we add a new interface to set spdif in source when hdmirx input.
Verify:
x301
Change-Id: I3c4e8b387308ef862a069c29d15b8b5a9e865564
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
udio: auge: tl1 acodec mapping to data 1 [1/2]
PD#SWPL-3277
Problem:
tl1 internal codec volume can by adjusted
Solution:
configure the acodec data layout mapping
to a fixed volume
Verify:
x301
Change-Id: I14d3762b39a0a5291722ef5489026f10fc960120
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts
audio: Fix TDM not wokring on HDMI I2S in [1/1]
PD#SWPL-2887
Problem:
When TDM is used for HDMI I2S in, the solt set is wrong.
Solution:
Fix the lane max value from 3 to 4
Verify:
A113
Change-Id: I33f5ca21bf1e2407d83fa5d0f22e21f7b1f5e749
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
audio: codec: fix to resume ad82584's volume after suspend [1/1]
PD#SWPL-3456
Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk
Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584
Verify:
x301
Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: auge: add vad driver [1/1]
PD#SWPL-2404
Problem:
VAD for wake up
Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine
Verify:
x301
Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: fix pop snd after bootup [2/2]
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: fix no audio after resume of ad82584f [1/1]
PD#SWPL-4090
Problem:
No audio after suspend and resume.
Suspend won't save the mute value,
and after resume, it could not be restored.
Solution:
Add a mute val to save when suspend,
and after resume, restore the mute value.
Verify:
Verified by QA.
Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: auge: fix sharebuffer channel map [1/1]
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts
audio: add stream mute and continuous clk [1/1]
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
dts: tl1: enable resample for tl1 [1/2]
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts
PD#SWPL-4048
Problem:
omx can not detect first frame have toggled
Solution:
omx get first frame toggoled flag
Verify:
verify by p212
Change-Id: I632824390287dd0257dca23a009ff8851054f68d
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-3226
Problem:
turn off the dv core, the osd flutters
Solution:
keeping core2 open when dv enable under sdr TV
Verify:
u212
Change-Id: Idf57c6e67676fb5eec944e543cb596247c932df4
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4194
Problem:
array need to initial.
Solution:
fixed it.
Verify:
verify by ampere
Change-Id: Ia72eb1afa54f092bbbb7265694ecec314691b14e
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-4194
Problem:
Systemcontorl set display mode when attr is difference
Solution:
Fix color space property parser
Verify:
G12A/U200
Change-Id: Iddbcbbf3925b175833f534a287de413315ca1170
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-3384
Problem:
DI post holdline setting is not map with video
Solution:
change holdline to 8
Verify:
verified by gxl
Change-Id: Ia352604086cefb4c69d5dd268d12741c4cf4f173
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-4016
Problem:
afbc decode error when write afbc start before afbc reset reg
Solution:
replace invalid reg when found afbc start before afbc reset reg
Verify:
test pass on franklin
Change-Id: Ia01608fe4d5c6132d0b54e63c48560e9e77bfe0a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
