PD#159499: hdmirx: set rxsense sync with hpd for every port
Change-Id: Ief053dc7772b12516153ef733d057a6b9a02aca2
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#171500
WQ_WATCHDOG amd DETECT_HUNG_TASK are debug options to detect task/workqueue are
blocked for a long time. Sometimes, error messages are misreported.
Change-Id: Ia898429359b2ff4c656b8b9b009c4a7fa1888931
Signed-off-by: Jianxin <jianxin.pan@amlogic.com>
PD#146811
':' and extral message folling PD#xxxx is not a must in line three
Change-Id: Ibe115f6a64bc267730020aaa52f8b21adb2f66a5
Signed-off-by: Jianxin <jianxin.pan@amlogic.com>
PD#169652: add CONFIG_ARM64_A32 and CONFIG_COMPAT
add CONFIG_ARM64_A32 support and add missing
CONFIG_COMPAT
Change-Id: Id041292cccd39618ba9932d123a219f0583fd4c5
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#171618: update dts name g12a_s905d2_u220 to g12a_s905y2_u220
Rename the dts name for u220.[2/2]
Change-Id: I3a9dde9210772bb50f26b68a884d7bdc6346752c
Signed-off-by: Tong Li <tong.li@amlogic.com>
PD#170723: cec: support otp and enter source
1.get wakeup reason from stick register
2.add get wakeup reason from wakeup
Change-Id: Idb0e56980569d3092fde971c0dcb73a4684bff0b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#171408: cec: auto power down function fail
1.reason: set auto pw down, disabled cec function
Change-Id: I554b085345bc144e6ff4166aae8c2d9d6620c524
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#168362: P211: emmc: upgrade gpt or ept based on priority
Change-Id: I0e7ea483ac5fc0a59ee24ae21d2e40e1c5d32465
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#171440: di: add mif enable after reset for g12
Change-Id: I61e3b7e96b88b8875d7de4948fa627c4882ab810
Signed-off-by: frank zhao <frank.zhao@amlogic.com>
PD#170791: by default, it is SCHED_NORMAL.
1a7a93bd33%5E!/
AOSP suggested to use SCHED_FIFO , 2, in Qcom platform.
there are another 2 sleeping point for osd_toggle_buffer.
need to adjust it still.
Change-Id: Ic94a4e1cfee218fc95b53358d2c2e72bbde7bfdd
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
PD#169652: board: use do_div for divid operation
when dividend is 64bit number, divid operation should
use do_div, otherwise link stage will fail for 32bit
system.
Change-Id: Iff2fdc328e364cec6486ab64e2e0f630ccb8534d
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#171081: backlight: add step power on support
default disable with bl_step_on_flag = 0.
change bl_step_on_flag to 1 to enable step_on function:
echo 1 >/sys/class/aml_bl/step_on
the brightness will be level_default first,
then come to the system brightness value.
Change-Id: I47ae56c0f814b2e0e5989b71f151ed84ffee795b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Commit 8844618d8a: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Change-Id: I3967036c1d84cc69798b7c948420735c623c9ae8
Fixes: 8844618d8a ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
PD#169652: board: fix ioremap call fail issue
for arm 32, ioremap will check if page is mapped
Change-Id: Icb5dda1b9de06d32e47c82a6bc45b62873332487
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#169652: board: fix stack overflow issue
it is better to use kmalloc to alloc buffer
instead of in stack buffer.
Change-Id: I6825d8acff19248f2f6c789ed2218af42ca4ffd3
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#170794: cec: add port info for mix mode
1.add port info for output and input mix mode
2.port number= input number + output number
3.r321 dts add 1 output number for mix mode
Change-Id: I17692f5fb4526b4f95474f5ea36c11213034724f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)
This patch reverts my suggestion in commit e241655373
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c67123 ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420bb ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk
[astrachan: rediffed against changed context lines in 4.9]
Bug: 79383895
PD#170298 [1/3]
Change-Id: I70d1f19796c6cb33cd4c19e40276d7298aa4ba5d
Signed-off-by: Alistair Strachan <astrachan@google.com>
PD#170502: dts: update the gpio key node for atom and sei210
Change-Id: Ib92167c36c2a756a784494da5dbe73a13c63dff0
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Signed-off-by: Victor Wan <victor.wan@amlogic.com>
Conflicts:
drivers/md/dm-bufio.c
drivers/media/dvb-core/dvb_frontend.c
drivers/usb/dwc3/core.c
drivers/usb/gadget/function/f_fs.c
PD#170980: di: optimize di pre mif config
1.add protect for di pre reset
2.add pre de done check when unreg
3.merge afbc hold line from alishan code
4.optimize pre mif enable sequence
Change-Id: I18851ad644aaee7c6c1d76c69f41a91f9599a36d
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#170794: cec: add the port info and connect status for audio system
Change-Id: I433788d4f5fcbb3164f894ebc0f6827dd47b0633
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
PD#166821: decrease DEFAULT_TVP_SIZE_FOR_4K and reserved-memory
DEFAULT_TVP_SIZE_FOR_4K to 192M
codec_mm_cma to 208M
ion_reserved to 78M
Change-Id: I2fd38f40c242ef531f8cf2226822bed4b0250a4f
Signed-off-by: Wencai You <wencai.you@amlogic.com>
PD#170749: vdin: add vdin output color depth selection
when vdin receive 4K && 50/60hz && 10bit data,
we can select vdin output color depth 8bit or 10bit from dts
Change-Id: I9c030b4769927dbf53880fad6c80707d7b282e86
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
