The block layer patches for inline encryption are now in upstream, so
update Android to the upstream version of inline encryption. The
fscrypt/f2fs/ext4 patches are also updated to the latest version sent
upstream (since they can't be updated separately from the block layer
patches).
Changes v6 => v7:
- Keyslot management is now done on a per-request basis rather than a
per-bio basis.
- Storage drivers can now specify the maximum number of bytes they
can accept for the data unit number (DUN) for each crypto algorithm,
and upper layers can specify the minimum number of bytes of DUN they
want with the blk_crypto_key they send with the bio - a driver is
only considered to support a blk_crypto_key if the driver supports at
least as many DUN bytes as the upper layer wants. This is necessary
because storage drivers may not support as many bytes as the
algorithm specification dictates (for e.g. UFS only supports 8 byte
DUNs for AES-256-XTS, even though the algorithm specification
says DUNs are 16 bytes long).
- Introduce SB_INLINECRYPT to keep track of whether inline encryption
is enabled for a filesystem (instead of using an fscrypt_operation).
- Expose keyslot manager declaration and embed it within ufs_hba to
clean up code.
- Make blk-crypto preclude blk-integrity.
- Some bug fixes
- Introduce UFSHCD_QUIRK_BROKEN_CRYPTO for UFS drivers that don't
support inline encryption (yet)
Changes v7 => v8:
- Pass a struct blk_ksm_keyslot * around instead of slot numbers which
simplifies some functions and passes around arguments with better types
- Make bios with no encryption context avoid making calls into blk-crypto
by checking for the presence of bi_crypt_context before making the call
- Make blk-integrity preclude inline encryption support at probe time
- Many many cleanups
Changes v8 => v9:
- Don't open code bio_has_crypt_ctx into callers of blk-crypto functions.
- Lots of cleanups
Changes v9 => v10:
- Incorporate Eric's fix for allowing en/decryption to happen as usual via
fscrypt in the case that hardware doesn't support the desired crypto
configuration, but blk-crypto-fallback is disabled. (Introduce
struct blk_crypto_config and blk_crypto_config_supported for fscrypt
to call, to check that either blk-crypto-fallback is enabled or the
device supports the crypto configuration).
- Update docs
- Lots of cleanups
Changes v10 => v11:
- We now allocate a new bio_crypt_ctx for each request instead of
pulling and reusing the one in the bio inserted into the request. The
bio_crypt_ctx of a bio is freed after the bio is ended.
- Make each blk_ksm_keyslot store a pointer to the blk_crypto_key
instead of a copy of the blk_crypto_key, so that each blk_crypto_key
will have its own keyslot. We also won't need to compute the siphash
for a blk_crypto_key anymore.
- Minor cleanups
Changes v11 => v12:
- Inlined some fscrypt functions
- Minor cleanups and improved comments
Changes v12 => v13:
- Updated docs
- Minor cleanups
- rebased onto linux-block/for-next
Changes v13 => fscrypt/f2fs/ext4 upstream patch series
- rename struct fscrypt_info::ci_key to ci_enc_key
- set dun bytes more precisely in fscrypt
- cleanups
Bug: 137270441
Test: Test cuttlefish boots both with and without inlinecrypt mount
option specified in fstab, while using both F2FS and EXT4 for
userdata.img. Also verified ciphertext via
"atest -v vts_kernel_encryption_test"
Also tested by running gce-xfstests on both the
auto and encrypt test groups on EXT4 and F2FS both with and
without the inlinecrypt mount option. The UFS changes were
tested on a Pixel 4 device.
Link: https://lore.kernel.org/linux-block/20200514003727.69001-1-satyat@google.com/
Link: https://lore.kernel.org/linux-fscrypt/20200617075732.213198-1-satyat@google.com/
Link: https://lore.kernel.org/linux-scsi/20200617081841.218985-1-satyat@google.com/
Change-Id: I57c10d370bf006c9dfcf173f21a720413017761e
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tiny merge resolutions along the way to 5.8-rc1.
Change-Id: I0036e22af4e398b0bb3b9855ff90d60b9c0227ee
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tiny merge resolutions along the way to 5.8-rc1.
Change-Id: I24b3cca28ed36f32c92b6374dae5d7f006d3bced
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 953d8eab92.
Turn KPROBES back on now that selinux protection is in place
Bug: 149659981
Change-Id: I22462081fca1af9758e57bcd75c88bdd29d23f8b
Signed-off-by: Todd Kjos <tkjos@google.com>
Merge __patchable_function_entries sections and the following
new data sections generated by current LLVM versions:
.bss..L* .bss..compoundliteral*
.data..L* .data..compoundliteral*
.rodata..L* .rodata..compoundliteral*
Also drop the unnecessary rules to merge .rela sections.
Bug: 158605670
Change-Id: I098212bc74dfb6b54d4fd60d90957fea29122a6c
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Only sync the sg-list of an Ion dma-buf attachment when the attachment
is actually mapped on the device.
dma-bufs may be synced at any time. It can be reached from user space
via DMA_BUF_IOCTL_SYNC, so there are no guarantees from callers on when
syncs may be attempted, and dma_buf_end_cpu_access() and
dma_buf_begin_cpu_access() may not be paired.
Since the sg_list's dma_address isn't set up until the buffer is used
on the device, and dma_map_sg() is called on it, the dma_address will be
NULL if sync is attempted on the dma-buf before it's mapped on a device.
Before v5.0 (commit 55897af630 ("dma-direct: merge swiotlb_dma_ops
into the dma_direct code")) this was a problem as the dma-api (at least
the swiotlb_dma_ops on arm64) would use the potentially invalid
dma_address. How that failed depended on how the device handled physical
address 0. If 0 was a valid address to physical ram, that page would get
flushed a lot, while the actual pages in the buffer would not get synced
correctly. While if 0 is an invalid address it cause a fault trigger a
crash.
In v5.0 this was incidentally fixed by commit 55897af630 ("dma-direct:
merge swiotlb_dma_ops into the dma_direct code"), as this moved the
dma-api to use the page pointer in the sg_list, and (for Ion buffers at
least) this will always be valid if the sg_list exists at all.
But, this issue is re-introduced in v5.3 with
commit 449fa54d68 ("dma-direct: correct the physical addr in
dma_direct_sync_sg_for_cpu/device") moves the dma-api back to the old
behaviour and picks the dma_address that may be invalid.
dma-buf core doesn't ensure that the buffer is mapped on the device, and
thus have a valid sg_list, before calling the exporter's
begin_cpu_access.
Bug: 155685387
Change-Id: Ie4da5a875957c831ce5b1345b5794357b844c84c
Signed-off-by: Orjan Eide <orjan.eide@arm.com>
Signed-off-by: Anders Pedersen <anders.pedersen@arm.corp-partner.google.com>
(cherry picked from commit 644ae915cd5df31179144c5b949539520a14f39a)
This will allow userdebug/eng builds to access debugfs without
needing to build a separate debug kernel.
Test: build
Bug: 153634660
Change-Id: I0617afea02ceab0a8f2ca4da3abf9bb270682de9
Signed-off-by: Hridya Valsaraju <hridya@google.com>
(cherry picked from commit 4123e4a204947b5dc3fbb3234cd1ba8ad52b33d5)
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit 44a2290faf.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Id9119f4b5f2cd20508a9747790ac113c14ca5ced
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit d78efa28eb.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I660802515882fe21d0255980b3ec61e0dfff06a8
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit e5438c0fea.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I99a5b3555caf473553222657aa53045be3767b0c
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit acd44754dd.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I6b32771c9112befb027573b5e84219ad05c7fbea
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit cb28bf9230.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I216e215977ed21e51c228614bb287f1f4ff5efd8
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit ee3f10f584.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ie68af0533b0d25d8aa925ef365c897941d0dd21b
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit 0db85aae47.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I1ea401c18421641e334f06fb8249b463968087eb
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit 8662f567f7.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ie9fd61af0b5825026d5ca1623c733799fbaea7ca
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit 4756bebcd2.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I26b3710cb4baa8ef62f7f50966975d21d179d4fe
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit c0ff3cd9d7.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I5294091b14f34f98de40c2e31329fa4b24311393
Shadow call stack is now merged upstream for 5.9, so revert the patches
cherry-picked into android-mainline in preparation for pulling the upstream
version instead.
This reverts commit 084cffa679.
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ie0f0e3a32948f68082ed23e67535529035a16300
CONFIG_BLK_DEV_LOOP_MIN_COUNT must be at least 16 in order
to pass VTS.
Bug: 158309019
Signed-off-by: Steve Muckle <smuckle@google.com>
Change-Id: I70df397f6340e15222cee9e5e0fc2125b2a17dad
Also consolidated changes to limits, including no longer changing
underlying device.
Bug: 153512828
Test: device boots, checkpoints can be committed or rolled back with and
without this parameter, parameter is accepted
Change-Id: I6fcb9bc21353a16ae0bf8998ffa22094eb1cbf3a
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Incremental fs appears to not depend on pkcs7 anymore.
Bug: 151584760
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Change-Id: I809b4b5651d84ca70fd8bf837765e33df8547418
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Baby steps on the way to some 5.8-rc1 merge bisection...
Change-Id: Ib185f04a2838587bb578c7c7b28cb5e50d85eb36
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This effectively reverts 531b5c9f5c ("sched/topology: Make Energy
Aware Scheduling depend on schedutil"), and updates the documentation
accordingly.
In the context of GKI 2.0, some partners need to use a custom cpufreq
govenor, but would like to keep EAS enabled.
Remove the hard dependency between them.
Bug: 157580690
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: Ied1c5aba6b692e26776b3e2c050780a67cc5bae1
Baby-steps along the way to 5.8-rc1.
Needed hand-holding for crypto fs changes, thanks to Eric for the
resolutions.
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7198edbca759839aceeec2598e7a81305756c4d7
Baby-steps on the way to 5.8-rc1.
Also deal with the crypto config breakage that happened in this merge
point.
Change-Id: I39cb4548fff8d985aa8566c1d4cf94d500f9d16e
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Pull hmm updates from Jason Gunthorpe:
"This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification
for hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: add HMM selftests
mm/hmm/test: add selftests for HMM
mm/hmm/test: add selftest driver for HMM
mm/hmm: remove the customizable pfn format from hmm_range_fault
mm/hmm: remove HMM_PFN_SPECIAL
drm/amdgpu: remove dead code after hmm_range_fault()
mm/hmm: make hmm_range_fault return 0 or -1
Pull PNP update from Rafael Wysocki:
"Replace a zero-length array with a flexible-array (Gustavo A. R.
Silva)"
* tag 'pnp-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNPBIOS: Replace zero-length array with flexible-array
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20200430, fix several reference counting errors related to ACPI
tables, add _Exx / _Lxx support to the GED driver, add a new
acpi_evaluate_reg() helper, add new DPTF battery participant driver
and extend the DPFT power participant driver, improve the handling of
memory failures in the APEI code, add a blacklist entry to the
backlight driver, update the PMIC driver and the processor idle
driver, fix two kobject reference count leaks, and make a few janitory
changes.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200430:
- Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
- Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
- Add status checks to the dispatcher (Erik Kaneda).
- Fix required parameters for _NIG and _NIH (Erik Kaneda).
- Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with only
one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two places
(Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei)"
* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
ACPI: DPTF: Add battery participant driver
ACPI: DPTF: Additional sysfs attributes for power participant driver
ACPI: video: Use native backlight on Acer TravelMate 5735Z
arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
ACPI: APEI: Kick the memory_failure() queue for synchronous errors
mm/memory-failure: Add memory_failure_queue_kick()
ACPI / PMIC: Add i2c address for thermal control
ACPI: GED: add support for _Exx / _Lxx handler methods
ACPI: Delete unused proc filename macros
ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
ACPI: utils: Add acpi_evaluate_reg() helper
ACPI: debug: Make two functions static
ACPI: sleep: Put the FACS table after using it
ACPI: scan: Put SPCR and STAO table after using it
ACPI: EC: Put the ACPI table after using it
ACPI: APEI: Put the HEST table for error path
ACPI: APEI: Put the error record serialization table for error path
...
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
Pull x86 platform driver updates from Andy Shevchenko:
- Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
- ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
T200TA
- Big refactoring of Intel SCU driver with Elkhart Lake support has
been added
- Slim Bootloarder firmware update signaling WMI driver has been added
- Thinkpad ACPI driver can handle dual fan configuration on new P and X
models
- Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
- Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
models
- Intel Speed Select tools update
- Plenty of small cleanups here and there
* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
platform/x86: dcdbas: Check SMBIOS for protected buffer address
platform/x86: asus_wmi: Reserve more space for struct bias_args
platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
platform/x86: acerhdf: replace space by * in modalias
platform/x86: ISST: Increase timeout
tools/power/x86/intel-speed-select: Fix invalid core mask
tools/power/x86/intel-speed-select: Increase CPU count
tools/power/x86/intel-speed-select: Fix json perf-profile output output
platform/x86: dell-wmi: Ignore keyboard attached / detached events
platform/x86: dell-laptop: don't register micmute LED if there is no token
platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
platform/x86: intel-vbtn: Detect switch position before registering the input-device
...
Pull MMC updates from Ulf Hansson:
"MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update"
* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
dt-bindings: mmc: Convert sdhci-pxa to json-schema
mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
mmc: core: Export device/vendor ids from Common CIS for SDIO cards
mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
mmc: sdhci-of-at91: fix CALCR register being rewritten
mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
mmc: sdhci-esdhc-imx: fix the mask for tuning start point
mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
mmc: mmci_sdmmc: fix DMA API warning max segment size
mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
mmc: sdhci-of-arasan: Add support for Intel Keem Bay
dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
mmc: sdhci-cadence: fix PHY write
mmc: sdio: Sort all SDIO IDs in common include file
mmc: sdio: Fix Cypress SDIO IDs macros in common include file
mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
mmc: sdio: Move SDIO IDs from ath10k driver to common include file
mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
mmc: sdio: Move SDIO IDs from smssdio driver to common include file
mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
