When releasing a channel, increment hsotg->available_host_channels even
in case a periodic channel is released.
Change-Id: I436f6b2db2a823e3479e7f1cd0a8c97ee498a64b
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 3f808bdae7)
Isochronous descriptor is currently programmed for the frame
after the last descriptor was programmed.
If the last descriptor frame underrun, then current descriptor must
take this into account and must be programmed on the current frame + 1.
This overrun usually happens when system is loaded and dwc2 can't init
descriptor list in time.
Change-Id: Ic1a50ef6c3325cbf171cc370e43569c8a3b7bd69
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit c17b337c1e)
This function allow comparing frame index used for
descriptor list which has 64 entries.
Change-Id: I72ac09aff8a8ca14d52d56c07f582df993a67c32
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit b9392d9920)
When completing non isoc xfer, dwc2_complete_non_isoc_xfer_ddma()
is relying on qtd->n_desc to process the corresponding number of
descriptors.
During the processing of these descriptors, qtd could be unlinked
and freed if xfer is done and urb is no more in progress.
In this case, dwc2_complete_non_isoc_xfer_ddma() will read again
qtd->n_desc whereas qtd has been freed. This will lead to unpredictable
results since qtd->n_desc is no more valid value.
To avoid this error, return a result != 0 in dwc2_process_non_isoc_desc(),
so that dwc2_complete_non_isoc_xfer_ddma() stops desc processing.
This has been seen with Slub debug enabled.
Change-Id: I375ddf56fbf4b4e19610d24891491868872d0e84
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 26a19ea699)
When a channel is halted because of urb dequeue during transfer
completion, no other qtds must be scheduled until halt is done.
Moreover, all in progress qtds must be given back.
Change-Id: I87d6a92372046f34fd66713db75690b4a096fc66
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit c503b38153)
Active bit must be enabled in all scheduled descriptors. Else transfer
never start.
Remove previous code which was not correctly configuring descriptors.
Active bit was set before calling dwc2_fill_host_isoc_dma_desc() which
is erasing dma_desc->status.
Change-Id: Ifee640205fc2af53c2f7859153209cb5de289988
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit dde4c1bf5d)
Increment qtd->isoc_frame_index_last before testing it, else below
check will never be true and IOC (Interrupt On Complete) bit for
last frame will never be set in descriptor status.
/* Set IOC for each descriptor corresponding to last frame of URB */
if (qtd->isoc_frame_index_last == qtd->urb->packet_count)
dma_desc->status |= HOST_DMA_IOC;
Change-Id: Ie4d30f20a3990d16cb27d0e137bb693fd7426376
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 3ac38d260f)
This patch adds system PM support for Rockchip's RC.
For pre S3, the EP is configured into D3 state which guarantees
the link state should be in L1. So we could send PME_Turn_Off message
to the EP and wait for its ACK to make the link state into L2 or L3
without the aux-supply. This could help save more power which I think
should be very important for mobile devices.
As note that there is a 5s timeout for RC to wait for the PMA_ACK
aftering send PME_Turn_Off. Technically it should depends on the
hierarchy of devices but seems PCIe core framework doesn't handle the
L2/3 for S3 at all. So that means we should presume to set a default
value for PME_ACK. From the bug report[1], we could find a statement that
Microsoft Windows versions typically wait for 5 seconds. So we are prone
to take 5s for this timeout here.
Change-Id: I3500911daaad07dfd632cda0f2f4b62cfc2909a2
[1] https://lists.launchpad.net/kernel-packages/msg123315.html
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from https://patchwork.kernel.org/patch/9470515/)
Rk iommus share pd and clk with their masters, to make iommus independent,
iommus need to manage pd and clk by using pm_runtime_get_sync API who is
not atomic save, might lead to sleep, we change the spin lock to mutex to
satisfy the pm_runtime_get_sync, callers of rk_iommu_attach_device
and rk_iommu_map should guarantee not in a atomic path.
Change-Id: Icbe175030d36572e19740d23eae94f49fe59eb10
Signed-off-by: Simon <xxm@rock-chips.com>
The commit 4ac53087d6 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().
This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add hcd.
Change-Id: I5a05ca6a8ac25e914752914abb70612849cc175e
Signed-off-by: William Wu <wulf@rock-chips.com>
Move them after phy_init as we want to optimize the logic
of reset control and reuse rockchip_pcie_init_port later
which should fully follow the cold boot procedure of ROM
code.
Change-Id: I0a826a6de91a7c413e42e36ea5ceea5007ee7b73
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from 0722bdd296)
We split out a new function, rockchip_cfg_atu, in order to
re-configure the atu when missing these information after
wakeup from S3.
Change-Id: I515b1bc5b8bc9be17b5d9858e17a05835d2fd144
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from 9e663d3f11)
Add PCIe dt-bindings for rk3399-tve1205g and keep them as
disabled status currently.
Change-Id: Ie92c6e330a6588ff88d69306674429d69b971b58
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
shell# cat /sys/kernel/debug/dri/0/mm_dump
0x0000000000000000-0x00000000000a6000: 679936: free
0x00000000000a6000-0x0000000000970000: 9216000: used
0x0000000000970000-0x000000000123a000: 9216000: used
0x000000000123a000-0x0000000001b04000: 9216000: used
0x0000000001b04000-0x00000000023ce000: 9216000: used
0x00000000023ce000-0x0000000002c98000: 9216000: used
0x0000000002c98000-0x0000000003562000: 9216000: used
0x0000000003562000-0x0000000003e2c000: 9216000: used
0x0000000003e2c000-0x0000000100000000: 4229775360: free
total: 4294967296, used 64512000 free 4230455296
Change-Id: I39cb5b12a63418c050b3bd890829f831f898db4e
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
change the name of functions for fb-based dp driver in order to fix
the compile errors of drm-based dp driver.
Change-Id: I6544c82d81bf4d8e5a7b936c7959349765d55049
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>
Currently the driver calls drm_dev_register() directly after allocating
the DRM device and then continues with further initialization. This is
incorrect, because drm_dev_register() is supposed to be called after all
initialization is done. This problem was masked by the fact that
drm_dev_register() did not use to do anything special before, but
recently it started to call drm_connector_register_all(), which leads to
a crash if the driver is not fully initialized.
This patch fixes the problem by moving the call to drm_dev_register() to
the end of the initialization sequence and also removing the, now
unnecessary, call to drm_connector_register_all() from driver code.
Fixes: f706974a69 ("drm/rockchip: Drop drm_driver.load/unload callbacks")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[danvet: Fix up cleanup labels a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466483254-35373-1-git-send-email-tfiga@chromium.org
(cherry picked from commit 9127f99c48)
Change-Id: Ie6d56242507c413db5e1b93e587d89a3a2200db6
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.
Correspondingly, add callbacks called before unregister drm device.
version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls
version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all
version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org
(cherry picked from commit 79190ea265)
Change-Id: I836e8ea62b46c0eae89cf8c70bcf3ea4e10068f5
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
rk3399 box rev1 and rev2 use gpio control for enable/disable vdd_cpu_b
rev1 use GPIO1_C1(default pull-down), rev2 use GPIO_C2(default pull-up)
Change-Id: I9ddbcff688905386d2d52f680cbb5f93d6c8d526
Signed-off-by: Zhangbin Tong <zebulun.tong@rock-chips.com>
otherwise it won't defined since we don't include it in kconfig
Change-Id: I6886068f89d53f3ecf47846ed7435131fdd7960f
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
The version of Midgard DDK used in RK Linux device is different from the one
used in Android platforms.
It might be convenient to have a separate src directory for it.
The new directory drivers/gpu/arm/midgard_for_linux is copied from
drivers/gpu/arm/midgard of commit 206f372ede.
It's on DDK r9p0-05rel0
There are also a few modifications in some 'Kbuild' files.
A new config MALI_MIDGARD_FOR_LINUX is introduced to specify which directory
of Midgard to use.
If defined, kbuild will compile src files under
drivers/gpu/arm/midgard_for_rk_linux_device,
otherwise, drivers/gpu/arm/midgard.
There is already a source directory of Midgard driver,
the 'Kconfig' file of the new directory is not be involved
in kconfig process.
Otherwise, there are problems caused by configs
with the same names in the two directories.
So, "midgard_for_rk_linux_device" could not be configured via menuconfig.
In the new directory, all the default configs are defined in default_config.mk.
'Kbuild' files include it.
Change-Id: I54f61cc50f7a168a742db7a11c6b6eebe21528f8
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
The host will trigger the hid interrupt to after reset hid, then send
wakeup key to light up screen,so any wakeupirq source will light up
screen due to reset hid in resume, and hid hwreset is not necessary.
Change-Id: I920239eeb4b57b0f594cc67cb8f4c1649c5125bd
Signed-off-by: Zhou weixin <zwx@rock-chips.com>
When USB is disabled, we get a link error for this driver
because of the added OTG support
drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string'
drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy'
Other phy drivers select USB_COMMON for this, so let's do the same
here.
Change-Id: I088b5862157d35360a30f21c8ed56a2a85792d53
Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: William Wu <wulf@rock-chips.com>
