commit 2334de198f upstream.
This reverts commit fce3c5c1a2.
FIFO is triggered 4 intervals after receiving a byte, it's good
when we don't care about the time of reception, but are only
interested in the presence of any activity on the line.
Unfortunately, this method is not suitable for all tasks,
for example, the RS-485 protocol will not work properly,
since the state machine must track the request-response time
and after the timeout expires, a decision is made that the device
on the line is not responding.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210217080608.31192-1-shc_work@mail.ru
Fixes: fce3c5c1a2 ("serial: max310x: rework RX interrupt handling")
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46613c9dfa upstream.
usbip_sockfd_store() is invoked when user requests attach (import)
detach (unimport) usb gadget device from usbip host. vhci_hcd sends
import request and usbip_sockfd_store() exports the device if it is
free for export.
Export and unexport are governed by local state and shared state
- Shared state (usbip device status, sockfd) - sockfd and Device
status are used to determine if stub should be brought up or shut
down. Device status is shared between host and client.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- While the device is exported, device status is marked used and socket,
sockfd, and thread pointers are valid.
Export sequence (stub-up) includes validating the socket and creating
receive (rx) and transmit (tx) threads to talk to the client to provide
access to the exported device. rx and tx threads depends on local and
shared state to be correct and in sync.
Unexport (stub-down) sequence shuts the socket down and stops the rx and
tx threads. Stub-down sequence relies on local and shared states to be
in sync.
There are races in updating the local and shared status in the current
stub-up sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to SDEV_ST_USED. This opens up a
race condition between the threads and usbip_sockfd_store() stub up
and down handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold usbip_device lock to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to SDEV_ST_USED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is a
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the stub-up sequence.
Fixes: 9720b4bc76 ("staging/usbip: convert to kthread")
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/b1c08b983ffa185449c9f0f7d1021dc8c8454b60.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718ad9693e upstream.
attach_store() is invoked when user requests import (attach) a device
from usbip host.
Attach and detach are governed by local state and shared state
- Shared state (usbip device status) - Device status is used to manage
the attach and detach operations on import-able devices.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- Device has to be in the right state to be attached and detached.
Attach sequence includes validating the socket and creating receive (rx)
and transmit (tx) threads to talk to the host to get access to the
imported device. rx and tx threads depends on local and shared state to
be correct and in sync.
Detach sequence shuts the socket down and stops the rx and tx threads.
Detach sequence relies on local and shared states to be in sync.
There are races in updating the local and shared status in the current
attach sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to VDEV_ST_NOTASSIGNED. This opens
up a race condition between the threads, port connect, and detach
handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold vhci and usbip_device locks to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to VDEV_ST_NOTASSIGNED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the attach sequence.
- Update usbip_device tcp_rx and tcp_tx pointers holding vhci and
usbip_device locks.
Tested with syzbot reproducer:
- https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000
Fixes: 9720b4bc76 ("staging/usbip: convert to kthread")
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/bb434bd5d7a64fbec38b5ecfb838a6baef6eb12b.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9380afd6df upstream.
usbip_sockfd_store() is invoked when user requests attach (import)
detach (unimport) usb device from usbip host. vhci_hcd sends import
request and usbip_sockfd_store() exports the device if it is free
for export.
Export and unexport are governed by local state and shared state
- Shared state (usbip device status, sockfd) - sockfd and Device
status are used to determine if stub should be brought up or shut
down.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- While the device is exported, device status is marked used and socket,
sockfd, and thread pointers are valid.
Export sequence (stub-up) includes validating the socket and creating
receive (rx) and transmit (tx) threads to talk to the client to provide
access to the exported device. rx and tx threads depends on local and
shared state to be correct and in sync.
Unexport (stub-down) sequence shuts the socket down and stops the rx and
tx threads. Stub-down sequence relies on local and shared states to be
in sync.
There are races in updating the local and shared status in the current
stub-up sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to SDEV_ST_USED. This opens up a
race condition between the threads and usbip_sockfd_store() stub up
and down handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold usbip_device lock to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to SDEV_ST_USED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is a
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the stub-up sequence.
Tested with syzbot reproducer:
- https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000
Fixes: 9720b4bc76 ("staging/usbip: convert to kthread")
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/268a0668144d5ff36ec7d87fdfa90faf583b7ccc.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5563b3b642 upstream.
Add PID for CH340 that's found on cheap programmers.
The driver works flawlessly as soon as the new PID (0x9986) is added to it.
These look like ANU232MI but ship with a ch341 inside. They have no special
identifiers (mine only has the string "DB9D20130716" printed on the PCB and
nothing identifiable on the packaging. The merchant i bought it from
doesn't sell these anymore).
the lsusb -v output is:
Bus 001 Device 009: ID 9986:7523
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x9986
idProduct 0x7523
bcdDevice 2.54
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0027
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Signed-off-by: Niv Sardi <xaiki@evilgiggle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 253f588c70 upstream.
A xHC USB 3 port might miss the first wake signal from a USB 3 device
if the port LFPS reveiver isn't enabled fast enough after xHC resume.
xHC host will anyway be resumed by a PME# signal, but will go back to
suspend if no port activity is seen.
The device resends the U3 LFPS wake signal after a 100ms delay, but
by then host is already suspended, starting all over from the
beginning of this issue.
USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device
needs to delay 100ms before resending the wake.
Don't suspend immediately if port activity isn't detected in resume.
Instead add a retry. If there is no port activity then delay for 120ms,
and re-check for port activity.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1d25e6ee5 upstream.
According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().
Example:
# modprobe g_ncm
Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
# rmmod g_ncm
# modprobe g_hid
Then, EP3 = pipe 6, EP4 = pipe 7.
So, pipe 3 and pipe 6 are set as EP3.
So, clear PIPECFG register in usbhs_pipe_free().
Fixes: dfb87b8bfe ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9de2c43acf upstream.
Apparently an application that opens a device and calls select()
on it, will hang if the decice is disconnected. It's a little
surprising that we had this bug for 15 years, but apparently
nobody ever uses select() with a printer: only write() and read(),
and those work fine. Well, you can also select() with a timeout.
The fix is modeled after devio.c. A few other drivers check the
condition first, then do not add the wait queue in case the
device is disconnected. We doubt that's completely race-free.
So, this patch adds the process first, then locks properly
and checks for the disconnect.
Reviewed-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 789ea77310 upstream.
As per UAC2 Audio Data Formats spec (2.3.1.1 USB Packets),
if the sampling rate is a constant, the allowable variation
of number of audio slots per virtual frame is +/- 1 audio slot.
It means that endpoint should be able to accept/send +1 audio
slot.
Previous endpoint max_packet_size calculation code
was adding sometimes +1 audio slot due to DIV_ROUND_UP
behaviour which was rounding up to closest integer.
However this doesn't work if the numbers are divisible.
It had no any impact with Linux hosts which ignore
this issue, but in case of more strict Windows it
caused rejected enumeration
Thus always add +1 audio slot to endpoint's max packet size
Fixes: 913e4a90b6 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Cc: Peter Chen <peter.chen@freescale.com>
Cc: <stable@vger.kernel.org> #v4.3+
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-2-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d8654e81d upstream.
The CDC ACM driver is false matching the Goodix Fingerprint device
against the USB_CDC_ACM_PROTO_AT_V25TER.
The Goodix Fingerprint device is a biometrics sensor that should be
handled in user-space. libfprint has some support for Goodix
fingerprint sensors, although not for this particular one. It is
possible that the vendor allocates a PID per OEM (Lenovo, Dell etc).
If this happens to be the case then more devices from the same vendor
could potentially match the ACM modem module table.
Signed-off-by: Yorick de Wid <ydewid@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210213144901.53199-1-ydewid@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04ad69c342 upstream.
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 774514bf97 upstream.
An issue has been observed on STM32MP157C-EV1 board, with an erase command
with secure erase argument, ending up waiting for ~4 hours before timeout.
The requested busy timeout from the mmc core ends up with 14784000ms (~4
hours), but the supported host->max_busy_timeout is 86767ms, which leads to
that the core switch to use an R1 response in favor of the R1B and polls
for busy with the host->card_busy() ops. In this case the polling doesn't
work as expected, as we never detects that the card stops signaling busy,
which leads to the following message:
mmc1: Card stuck being busy! __mmc_poll_for_busy
The problem boils done to that the stm32 variants can't use R1 responses in
favor of R1B responses, as it leads to an internal state machine in the
controller to get stuck. To continue to process requests, it would need to
be reset.
To fix this problem, let's set MMC_CAP_NEED_RSP_BUSY for the stm32 variant,
which prevent the mmc core from switching to R1 responses. Additionally,
let's cap the cmd->busy_timeout to the host->max_busy_timeout, thus rely on
86767ms to be sufficient (~66 seconds was need for this test case).
Fixes: 94fe2580a2 ("mmc: core: Enable erase/discard/trim support for all mmc hosts")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20210225145454.12780-1-yann.gautier@foss.st.com
Cc: stable@vger.kernel.org
[Ulf: Simplified the code and extended the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e77d96b8e upstream.
When creating a new event channel with 2-level events the affinity
needs to be reset initially in order to avoid using an old affinity
from earlier usage of the event channel port. So when tearing an event
channel down reset all affinity bits.
The same applies to the affinity when onlining a vcpu: all old
affinity settings for this vcpu must be reset. As percpu events get
initialized before the percpu event channel hook is called,
resetting of the affinities happens after offlining a vcpu (this is
working, as initial percpu memory is zeroed out).
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Link: https://lore.kernel.org/r/20210306161833.4552-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66f669a272 upstream.
Prevent that an IO request is build during device shutdown initiated by
a driver unbind. This request will never be able to be processed or
canceled and will hang forever. This will lead also to a hanging unbind.
Fix by checking not only if the device is in READY state but also check
that there is no device offline initiated before building a new IO request.
Fixes: e443343e50 ("s390/dasd: blk-mq conversion")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d365bd0bf upstream.
In case of an unbind of the DASD device driver the function
dasd_generic_remove() is called which shuts down the device.
Among others this functions removes the int_handler from the cdev.
During shutdown the device cancels all outstanding IO requests and waits
for completion of the clear request.
Unfortunately the clear interrupt will never be received when there is no
interrupt handler connected.
Fix by moving the int_handler removal after the call to the state machine
where no request or interrupt is outstanding.
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56887cffe9 upstream.
Commit 384d87ef2c ("block: Do not discard buffers under a mounted
filesystem") made paths issuing discard or zeroout requests to the
underlying device try to grab block device in exclusive mode. If that
failed we returned EBUSY to userspace. This however caused unexpected
fallout in userspace where e.g. FUSE filesystems issue discard requests
from userspace daemons although the device is open exclusively by the
kernel. Also shrinking of logical volume by LVM issues discard requests
to a device which may be claimed exclusively because there's another LV
on the same PV. So to avoid these userspace regressions, fall back to
invalidate_inode_pages2_range() instead of returning EBUSY to userspace
and return EBUSY only of that call fails as well (meaning that there's
indeed someone using the particular device range we are trying to
discard).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211167
Fixes: 384d87ef2c ("block: Do not discard buffers under a mounted filesystem")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e511350590 upstream.
When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.
This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 3ed05a987e ("blk-zoned: implement ioctls")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b0c2d3eaa upstream.
It turns out that there are in fact userspace implementations that
care and this recent change caused a regression.
https://github.com/containers/buildah/issues/3071
As the motivation for the original change was future development,
and the impact is existing real world code just revert this change
and allow the ambiguity in v3 file caps.
Cc: stable@vger.kernel.org
Fixes: 95ebabde38 ("capabilities: Don't allow writing ambiguous v3 file capabilities")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
