commit 4878f9f8421f4587bee7b232c1c8a9d3a7d4d782 upstream.
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352 ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_join.sh, because the 'run_tests' helper has been
modified in multiple commits that are not in this version, e.g. commit
e571fb09c8 ("selftests: mptcp: add speed env var"). The conflict was
in the context, the new line can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b8ed1b429f8fa7ebd5632555e7b047bc0620075 upstream.
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48e50dcbcbaaf713d82bf2da5c16aeced94ad07d upstream.
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.c, because the context has been modified in
commit b9d69db87f ("mptcp: let the in-kernel PM use mixed IPv4 and
IPv6 addresses"), which is not a candidate for the backports. The same
modifications have been applied in this version. The conflict in
mptcp_pm_create_subflow_or_signal_addr() has been resolved by taking
the newer version, which skip a lock if it is not needed. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09355f7abb9fbfc1a240be029837921ea417bf4f upstream.
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.
It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.
Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.c, because the new 'mpc_addr' variable is
added where the 'local' one was, before commit b9d69db87f ("mptcp:
let the in-kernel PM use mixed IPv4 and IPv6 addresses"), that is not
a candidate for the backports. This 'local' variable has been moved to
the new place to reduce the scope, and help with possible future
backports. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eee5330656bf92f51cb1f09b2dc9f8cf975b3d1 upstream.
KFENCE reports the following UAF:
BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488
Use-after-free read at 0x0000000024629571 (in kfence-#12):
__pci_enable_msi_range+0x2c0/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128
allocated by task 81 on cpu 7 at 10.808142s:
__kmem_cache_alloc_node+0x1f0/0x2bc
kmalloc_trace+0x44/0x138
msi_alloc_desc+0x3c/0x9c
msi_domain_insert_msi_desc+0x30/0x78
msi_setup_msi_desc+0x13c/0x184
__pci_enable_msi_range+0x258/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
freed by task 81 on cpu 7 at 10.811436s:
msi_domain_free_descs+0xd4/0x10c
msi_domain_free_locked.part.0+0xc0/0x1d8
msi_domain_alloc_irqs_all_locked+0xb4/0xbc
pci_msi_setup_msi_irqs+0x30/0x4c
__pci_enable_msi_range+0x2a8/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
Descriptor allocation done in:
__pci_enable_msi_range
msi_capability_init
msi_setup_msi_desc
msi_insert_msi_desc
msi_domain_insert_msi_desc
msi_alloc_desc
...
Freed in case of failure in __msi_domain_alloc_locked()
__pci_enable_msi_range
msi_capability_init
pci_msi_setup_msi_irqs
msi_domain_alloc_irqs_all_locked
msi_domain_alloc_locked
__msi_domain_alloc_locked => fails
msi_domain_free_locked
...
That failure propagates back to pci_msi_setup_msi_irqs() in
msi_capability_init() which accesses the descriptor for unmasking in the
error exit path.
Cure it by copying the descriptor and using the copy for the error exit path
unmask operation.
[ tglx: Massaged change log ]
Fixes: bf6e054e0e ("genirq/msi: Provide msi_device_populate/destroy_sysfs()")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Heelgas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624203729.1094506-1-smostafa@google.com
Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87b5896f3f7848130095656739b05881904e2697 ]
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e38b117d7f3b4a5d810f6d0069ad0f643e503796 ]
mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da1e
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 87b5896f3f78 ("mptcp: pm: fix RM_ADDR ID for the initial subflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd44ca3de49cc1badcff7a96010fa2c64f04868c ]
Currently the dma debugging code can end up indirectly calling printk
under the radix_lock. This happens when a radix tree node allocation
fails.
This is a problem because the printk code, when used together with
netconsole, can end up inside the dma debugging code while trying to
transmit a message over netcons.
This creates the possibility of either a circular deadlock on the same
CPU, with that CPU trying to grab the radix_lock twice, or an ABBA
deadlock between different CPUs, where one CPU grabs the console lock
first and then waits for the radix_lock, while the other CPU is holding
the radix_lock and is waiting for the console lock.
The trace captured by lockdep is of the ABBA variant.
-> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x5a/0x90
debug_dma_map_page+0x79/0x180
dma_map_page_attrs+0x1d2/0x2f0
bnxt_start_xmit+0x8c6/0x1540
netpoll_start_xmit+0x13f/0x180
netpoll_send_skb+0x20d/0x320
netpoll_send_udp+0x453/0x4a0
write_ext_msg+0x1b9/0x460
console_flush_all+0x2ff/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
devkmsg_emit+0x5a/0x80
devkmsg_write+0xfd/0x180
do_iter_readv_writev+0x164/0x1b0
vfs_writev+0xf9/0x2b0
do_writev+0x6d/0x110
do_syscall_64+0x80/0x150
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (console_owner){-.-.}-{0:0}:
__lock_acquire+0x15d1/0x31a0
lock_acquire+0xe8/0x290
console_flush_all+0x2ea/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
_printk+0x59/0x80
warn_alloc+0x122/0x1b0
__alloc_pages_slowpath+0x1101/0x1120
__alloc_pages+0x1eb/0x2c0
alloc_slab_page+0x5f/0x150
new_slab+0x2dc/0x4e0
___slab_alloc+0xdcb/0x1390
kmem_cache_alloc+0x23d/0x360
radix_tree_node_alloc+0x3c/0xf0
radix_tree_insert+0xf5/0x230
add_dma_entry+0xe9/0x360
dma_map_page_attrs+0x1d2/0x2f0
__bnxt_alloc_rx_frag+0x147/0x180
bnxt_alloc_rx_data+0x79/0x160
bnxt_rx_skb+0x29/0xc0
bnxt_rx_pkt+0xe22/0x1570
__bnxt_poll_work+0x101/0x390
bnxt_poll+0x7e/0x320
__napi_poll+0x29/0x160
net_rx_action+0x1e0/0x3e0
handle_softirqs+0x190/0x510
run_ksoftirqd+0x4e/0x90
smpboot_thread_fn+0x1a8/0x270
kthread+0x102/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x11/0x20
This bug is more likely than it seems, because when one CPU has run out
of memory, chances are the other has too.
The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so
not many users are likely to trigger it.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Konstantin Ovsepian <ovs@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f17c06c6608ad4ecd2ccf321753fb511812d821b ]
Add IS_ENABLED(CONFIG_I2C) to the conditional around a bunch of ACPI
functions.
The conditional around these functions depended only on CONFIG_ACPI.
But the functions are implemented in I2C core, so are only present if
CONFIG_I2C is enabled.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cd23b26b348fa52c88e1adf9c0e48d68e13f95e ]
Some devices indicate click noises at suspend or shutdown when the
speakers are unmuted. This patch adds a helper,
snd_hda_gen_shutup_speakers(), to work around it. The new function is
supposed to be called at suspend or shutdown by the codec driver, and
it mutes the speakers.
The mute status isn't cached, hence the original mute state will be
restored at resume again.
Link: https://patch.msgid.link/20240726142625.2460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98c0cc48e27e9d269a3e4db2acd72b486c88ec77 ]
policy_unpack_test fails on big endian systems because data byte order
is expected to be little endian but is generated in host byte order.
This results in test failures such as:
# policy_unpack_test_unpack_array_with_null_name: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:150
Expected array_size == (u16)16, but
array_size == 4096 (0x1000)
(u16)16 == 16 (0x10)
# policy_unpack_test_unpack_array_with_null_name: pass:0 fail:1 skip:0 total:1
not ok 3 policy_unpack_test_unpack_array_with_null_name
# policy_unpack_test_unpack_array_with_name: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:164
Expected array_size == (u16)16, but
array_size == 4096 (0x1000)
(u16)16 == 16 (0x10)
# policy_unpack_test_unpack_array_with_name: pass:0 fail:1 skip:0 total:1
Add the missing endianness conversions when generating test data.
Fixes: 4d944bcd4e ("apparmor: add AppArmor KUnit tests for policy unpack")
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ]
aac_probe_one() calls hardware-specific init functions through the
aac_driver_ident::init pointer, all of which eventually call down to
aac_init_adapter().
If aac_init_adapter() fails after allocating memory for aac_dev::queues,
it frees the memory but does not clear that member.
After the hardware-specific init function returns an error,
aac_probe_one() goes down an error path that frees the memory pointed to
by aac_dev::queues, resulting.in a double-free.
Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com>
Link: https://bugs.debian.org/1075855
Fixes: 8e0c5ebde8 ("[SCSI] aacraid: Newer adapter communication iterface support")
Signed-off-by: Ben Hutchings <benh@debian.org>
Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6c3fc0b1c3d073bd6fc3bf43dbd0e64240537464 upstream.
A large tx latency issue was discovered during testing when only QBV was
enabled. The issue occurs because gtxoffset was not set when QBV is
active, it was only set when launch time is active.
The patch "igc: Correct the launchtime offset" only sets gtxoffset when
the launchtime_enable field is set by the user. Enabling launchtime_enable
ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as
LaunchT in the SW user manual).
Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states:
"The latency between transmission scheduling (launch time) and the
time the packet is transmitted to the network is listed in Table 7-61."
However, the patch misinterprets the phrase "launch time" in that section
by assuming it specifically refers to the LaunchT register, whereas it
actually denotes the generic term for when a packet is released from the
internal buffer to the MAC transmit logic.
This launch time, as per that section, also implicitly refers to the QBV
gate open time, where a packet waits in the buffer for the QBV gate to
open. Therefore, latency applies whenever QBV is in use. TSN features such
as QBU and QAV reuse QBV, making the latency universal to TSN features.
Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that
the term "launch time" used in Section 7.5.2.6 is not clear and can be
easily misinterpreted. Avi will update this section to:
"When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission
scheduling and the time the packet is transmitted to the network is listed
in Table 7-61."
Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to
write to gtxoffset, aligning with the newly updated SW User Manual.
Tested:
1. Enrol taprio on talker board
base-time 0
cycle-time 1000000
flags 0x2
index 0 cmd S gatemask 0x1 interval1
index 0 cmd S gatemask 0x1 interval2
Note:
interval1 = interval for a 64 bytes packet to go through
interval2 = cycle-time - interval1
2. Take tcpdump on listener board
3. Use udp tai app on talker to send packets to listener
4. Check the timestamp on listener via wireshark
Test Result:
100 Mbps: 113 ~193 ns
1000 Mbps: 52 ~ 84 ns
2500 Mbps: 95 ~ 223 ns
Note that the test result is similar to the patch "igc: Correct the
launchtime offset".
Fixes: 790835fcc0 ("igc: Correct the launchtime offset")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0afeaeb5dae86aceded0d5f0c3a54d27858c0c6f upstream.
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
remaining issues with the reset adapter logic in igc_tsn_offload_apply()
have been observed:
1. The reset adapter logics for i225 and i226 differ, although they should
be the same according to the guidelines in I225/6 HW Design Section
7.5.2.1 on software initialization during tx mode changes.
2. The i225 resets adapter every time, even though tx mode doesn't change.
This occurs solely based on the condition igc_is_device_id_i225() when
calling schedule_work().
3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
resets adapter for legacy->tsn tx mode transitions.
4. qbv_count introduced in the patch is actually not needed; in this
context, a non-zero value of qbv_count is used to indicate if tx mode
was unconditionally set to tsn in igc_tsn_enable_offload(). This could
be replaced by checking the existing register
IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
This patch resolves all issues and enters schedule_work() to reset the
adapter only when changing tx mode. It also removes reliance on qbv_count.
qbv_count field will be removed in a future patch.
Test ran:
1. Verify reset adapter behaviour in i225/6:
a) Enrol a new GCL
Reset adapter observed (tx mode change legacy->tsn)
b) Enrol a new GCL without deleting qdisc
No reset adapter observed (tx mode remain tsn->tsn)
c) Delete qdisc
Reset adapter observed (tx mode change tsn->legacy)
2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
to confirm it remains resolved.
Fixes: 175c241288 ("igc: Fix TX Hang issue when QBV Gate is closed")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Only want the igc_tsn_is_tx_mode_in_tsn() portion of this for older stable
kernels - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 687d6bccb28238fcfa65f7c1badfdfeac498c428 upstream.
Lanes can use other lanes' reference clocks, as determined by refclk.
Use refclk to determine the clock to enable/disable instead of always
using the lane's own reference clock. This ensures the clock selected in
xpsgtr_configure_pll is the one enabled.
For the other half of the equation, always program REF_CLK_SEL even when
we are selecting the lane's own clock. This ensures that Linux's idea of
the reference clock matches the hardware. We use the "local" clock mux
for this instead of going through the ref clock network.
Fixes: 25d7008335 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240628205540.3098010-2-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 740f2e2791b98e47288b3814c83a3f566518fed2 upstream.
Stop Endpoint command on LINK TRB with TC bit set to 1 causes that
internal cycle bit can have incorrect state after command complete.
In consequence empty transfer ring can be incorrectly detected
when EP is resumed.
NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command
is then on NOP TRB and internal cycle bit is not changed and have
correct value.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddfcfeba891064b88bb844208b43bef2ef970f0c upstream.
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources.
Fixes: f83fca0707 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14e497183df28c006603cc67fd3797a537eef7b9 upstream.
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address.
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9bb896eab221618927ae6a2f1d566567999839d upstream.
Linux does not write into cmd-db region. This region of memory is write
protected by XPU. XPU may sometime falsely detect clean cache eviction
as "write" into the write protected region leading to secure interrupt
which causes an endless loop somewhere in Trust Zone.
The only reason it is working right now is because Qualcomm Hypervisor
maps the same region as Non-Cacheable memory in Stage 2 translation
tables. The issue manifests if we want to use another hypervisor (like
Xen or KVM), which does not know anything about those specific mappings.
Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC
removes dependency on correct mappings in Stage 2 tables. This patch
fixes the issue by updating the mapping to MEMREMAP_WC.
I tested this on SA8155P with Xen.
Fixes: 312416d917 ("drivers: qcom: add command DB driver")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 WoA in EL2
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240718-cmd_db_uncached-v2-1-f6cf53164c90@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit febccb39255f9df35527b88c953b2e0deae50e53 ]
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f580 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0870b0d8b393dde53106678a1e2cec9dfa52f9b7 ]
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 0602129286 ("net: add low latency socket poll")
Fixes: 9a3c71aa80 ("net: convert low latency sockets to sched_clock()")
Fixes: 3708983452 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b9a33235c773c7a3768060cf1d2cf8a9153bc37 ]
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a0504d54b3b57f0d7bf3d9184a00c9f8887f6d7 ]
sctp_sf_do_5_2_4_dupcook() currently calls security_sctp_assoc_request()
on new_asoc, but as it turns out, this association is always discarded
and the LSM labels never get into the final association (asoc).
This can be reproduced by having two SCTP endpoints try to initiate an
association with each other at approximately the same time and then peel
off the association into a new socket, which exposes the unitialized
labels and triggers SELinux denials.
Fix it by calling security_sctp_assoc_request() on asoc instead of
new_asoc. Xin Long also suggested limit calling the hook only to cases
A, B, and D, since in cases C and E the COOKIE ECHO chunk is discarded
and the association doesn't enter the ESTABLISHED state, so rectify that
as well.
One related caveat with SELinux and peer labeling: When an SCTP
connection is set up simultaneously in this way, we will end up with an
association that is initialized with security_sctp_assoc_request() on
both sides, so the MLS component of the security context of the
association will get swapped between the peers, instead of just one side
setting it to the other's MLS component. However, at that point
security_sctp_assoc_request() had already been called on both sides in
sctp_sf_do_unexpected_init() (on a temporary association) and thus if
the exchange didn't fail before due to MLS, it won't fail now either
(most likely both endpoints have the same MLS range).
Tested by:
- reproducer from https://src.fedoraproject.org/tests/selinux/pull-request/530
- selinux-testsuite (https://github.com/SELinuxProject/selinux-testsuite/)
- sctp-tests (https://github.com/sctp/sctp-tests) - no tests failed
that wouldn't fail also without the patch applied
Fixes: c081d53f97 ("security: pass asoc to sctp_assoc_request and sctp_sk_clone")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM/SELinux)
Link: https://patch.msgid.link/20240826130711.141271-1-omosnace@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec13009472f4a756288eb4e18e20a7845da98d10 ]
Add this implementation for bonding, so hardware resources can be
freed from the active slave after xfrm state is deleted. The netdev
used to invoke xdo_dev_state_free callback, is saved in the xfrm state
(xs->xso.real_dev), which is also the bond's active slave. To prevent
it from being freed, acquire netdev reference before leaving RCU
read-side critical section, and release it after callback is done.
And call it when deleting all SAs from old active real interface while
switching current active slave.
Fixes: 9a5605505d ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ]
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fd0628918977a0afdc2e6bc562d8751b5d3b8c5 ]
Subtract network offset to skb->len before performing IPv4 header sanity
checks, then adjust transport offset from offset from mac header.
Jorge Ortiz says:
When small UDP packets (< 4 bytes payload) are sent from eth0,
`meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is
not set. This happens because there is a comparison that checks if the
transport header offset exceeds the total length. This comparison does
not take into account the fact that the skb network offset might be
non-zero in egress mode (e.g., 14 bytes for Ethernet header).
Fixes: 0ae8e4cca787 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress")
Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6093cd582f8e027117a8d4ad5d129a1aacdc53d2 ]
These three implementations of map_pages() all succeed if a mapping is
requested with no read or write. Since they return back to __iommu_map()
leaving the mapped output as 0 it triggers an infinite loop. Therefore
nothing is using no-access protection bits.
Further, VFIO and iommufd rely on iommu_iova_to_phys() to get back PFNs
stored by map, if iommu_map() succeeds but iommu_iova_to_phys() fails that
will create serious bugs.
Thus remove this never used "nothing to do" concept and just fail map
immediately.
Fixes: e5fc9753b1 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Fixes: e1d3c0fd70 ("iommu: add ARM LPAE page table allocator")
Fixes: 745ef1092b ("iommu/io-pgtable: Move Apple DART support to its own file")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/2-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18b3256db76bd1130965acd99fbd38f87c3e6950 ]
This fixes not handling hibernation actions on suspend notifier so they
are treated in the same way as regular suspend actions.
Fixes: 9952d90ea2 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d04b21bfa1c50a2ade4816cab6fdc91827b346b1 ]
Currently in case of the DEV_TO_MEM or MEM_TO_DEV DMA transfers the memory
data width (single transfer width) is determined based on the buffer
length, buffer base address or DMA master-channel max address width
capability. It isn't enough in case of the channel disabling prior the
block transfer is finished. Here is what DW AHB DMA IP-core databook says
regarding the port suspension (DMA-transfer pause) implementation in the
controller:
"When CTLx.SRC_TR_WIDTH < CTLx.DST_TR_WIDTH and the CFGx.CH_SUSP bit is
high, the CFGx.FIFO_EMPTY is asserted once the contents of the FIFO do not
permit a single word of CTLx.DST_TR_WIDTH to be formed. However, there may
still be data in the channel FIFO, but not enough to form a single
transfer of CTLx.DST_TR_WIDTH. In this scenario, once the channel is
disabled, the remaining data in the channel FIFO is not transferred to the
destination peripheral."
So in case if the port gets to be suspended and then disabled it's
possible to have the data silently discarded even though the controller
reported that FIFO is empty and the CTLx.BLOCK_TS indicated the dropped
data already received from the source device. This looks as if the data
somehow got lost on a way from the peripheral device to memory and causes
problems for instance in the DW APB UART driver, which pauses and disables
the DMA-transfer as soon as the recv data timeout happens. Here is the way
it looks:
Memory <------- DMA FIFO <------ UART FIFO <---------------- UART
DST_TR_WIDTH -+--------| | |
| | | | No more data
Current lvl -+--------| |---------+- DMA-burst lvl
| | |---------+- Leftover data
| | |---------+- SRC_TR_WIDTH
-+--------+-------+---------+
In the example above: no more data is getting received over the UART port
and BLOCK_TS is not even close to be fully received; some data is left in
the UART FIFO, but not enough to perform a bursted DMA-xfer to the DMA
FIFO; some data is left in the DMA FIFO, but not enough to be passed
further to the system memory in a single transfer. In this situation the
8250 UART driver catches the recv timeout interrupt, pauses the
DMA-transfer and terminates it completely, after which the IRQ handler
manually fetches the leftover data from the UART FIFO into the
recv-buffer. But since the DMA-channel has been disabled with the data
left in the DMA FIFO, that data will be just discarded and the recv-buffer
will have a gap of the "current lvl" size in the recv-buffer at the tail
of the lately received data portion. So the data will be lost just due to
the misconfigured DMA transfer.
Note this is only relevant for the case of the transfer suspension and
_disabling_. No problem will happen if the transfer will be re-enabled
afterwards or the block transfer is fully completed. In the later case the
"FIFO flush mode" will be executed at the transfer final stage in order to
push out the data left in the DMA FIFO.
In order to fix the denoted problem the DW AHB DMA-engine driver needs to
make sure that the _bursted_ source transfer width is greater or equal to
the single destination transfer (note the HW databook describes more
strict constraint than actually required). Since the peripheral-device
side is prescribed by the client driver logic, the memory-side can be only
used for that. The solution can be easily implemented for the DEV_TO_MEM
transfers just by adjusting the memory-channel address width. Sadly it's
not that easy for the MEM_TO_DEV transfers since the mem-to-dma burst size
is normally dynamically determined by the controller. So the only thing
that can be done is to make sure that memory-side address width is greater
than the peripheral device address width.
Fixes: a09820043c ("dw_dmac: autoconfigure data_width or get it via platform data")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-3-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b336268dde75cb09bd795cb24893d52152a9191f ]
Currently the src_addr_width and dst_addr_width fields of the
dma_slave_config structure are mapped to the CTLx.SRC_TR_WIDTH and
CTLx.DST_TR_WIDTH fields of the peripheral bus side in order to have the
properly aligned data passed to the target device. It's done just by
converting the passed peripheral bus width to the encoded value using the
__ffs() function. This implementation has several problematic sides:
1. __ffs() is undefined if no bit exist in the passed value. Thus if the
specified addr-width is DMA_SLAVE_BUSWIDTH_UNDEFINED, __ffs() may return
unexpected value depending on the platform-specific implementation.
2. DW AHB DMA-engine permits having the power-of-2 transfer width limited
by the DMAH_Mk_HDATA_WIDTH IP-core synthesize parameter. Specifying
bus-width out of that constraints scope will definitely cause unexpected
result since the destination reg will be only partly touched than the
client driver implied.
Let's fix all of that by adding the peripheral bus width verification
method and calling it in dwc_config() which is supposed to be executed
before preparing any transfer. The new method will make sure that the
passed source or destination address width is valid and if undefined then
the driver will just fallback to the 1-byte width transfer.
Fixes: 029a40e97d ("dmaengine: dw: provide DMA capabilities")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-2-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
