This patch removes redundant i2s fifo resets, which also cause blips on playback.
It also moves the fifo attention levels to struct audio_stream.
Signed-off-by: Iliyan Malchev <malchev@google.com>
Add an ioctl to allow the TX fifo to be loaded with data before playback
starts. Playback can then be started by calling write() on the FIFO, even
with a length of 0. This will cause the pending data to be played out.
Signed-off-by: Iliyan Malchev <malchev@google.com>
-- Use consistently the various state flags:
-- active is set only when there is a read or write in flight
-- recording_canncelled is set only when recording is stopped via the ioctl()
-- dma_has_it is used to determine whether DMA is already in flight; do not
use the state of the fifos for this (e.g., if the TX fifo is empty, do not
assume that playback is stopped)
-- added a stop_completion (implemented for readers only) so that readers
closing a stream can wait until DMA or PIO transactions are stopped
-- Split /dev/audio0_{in,out} into /dev/audio0_{in,in_ctl,out,out_ctl} where the
_ctl versions have the ioctl()s
-- Introduced an error count per audio_stream; error count is reset on open, can
be read back & reset through an ioctl
Signed-off-by: Iliyan Malchev <malchev@google.com>
-- Add ioctls for configuring buffer, threshold, and DMA-transaction sizes from
user space.
-- Buffer sizes are provided in orders of magnitude.
-- Allocate max-sized buffers during probe, and allow the user to resize them
only within the original allocation, to avoid the risk from kmalloc failing
due to kernel-heap fragmentation, and also to avoid race conditions on DMA
shut-down.
-- In tegra_audio_write(), moved the call to start_playback_if_necessary()
immediately after writing to the fifo. Otherwise, when the fifo size is
smaller than what the user is trying to write, the user will block before
playback is started.
-- Silenced printk spew on spinning on i2s registers after transactions are
completed.
-- Cleaned up a 80-col style violation in downsample()
Signed-off-by: Iliyan Malchev <malchev@google.com>
On suspend, use phy_suspend save the phy registers so that there is
no need to reset the controller and re-enumerate devices on resume.
Change-Id: I00fe5b87a1b319044724494b8e635b540088a38b
Signed-off-by: Benoit Goby <benoit@android.com>
Reset the controller when the cable is unplugged to leave it in the idle
state. The OTG driver will reconfigure it on vbus/id pin detection.
Change-Id: I87903ec86f3c35af64a141f27a34cc0720a61b08
Signed-off-by: Benoit Goby <benoit@android.com>
phy_suspend save the phy registers and power it off. phy_clk_disable
disable the phy clock to put the phy in low power mode.
Change-Id: If5665ec96beec9441fae3b737923dbe69c86e650
Signed-off-by: Benoit Goby <benoit@android.com>
The OTG driver will power it up on ID pin detection. This avoids
race conditions when the device is powered on with the otg cable
attached.
Change-Id: I6bd5f1d73284f9b8534ef3dfb936b81a9400fa5b
Signed-off-by: Benoit Goby <benoit@android.com>
The clock to the ARM TWD local timer scales with the cpu
frequency. To allow the cpu frequency to change while
maintaining a constant TWD frequency, pick a lower target
frequency for the TWD and use the prescaler to divide down
to the closest lower frequency.
This patch provides a new initialization function that takes
a target TWD frequency and the relation between the cpu
clock and the TWD clock, required to be an integer divider
>= 2 by the ARM spec. It also provides a function to be
called from cpufreq drivers to set the prescaler whenever
the cpu frequency changes.
Also fixes a typo in the printk of the calibrated frequency.
Change-Id: I3fa8ef718ff5518170f1b2bab29efe960741853e
Signed-off-by: Colin Cross <ccross@google.com>
downsampling:
-- add ioctl()s to downsample recorded data
-- supported frequencies are 8kHz, 11.025kHz, 22.05kHz, and 44.1kHz
-- downsamping to stereo and mono
-- default is 11.025kHz mono
fixes:
-- fix crashes from dequeuing DMA requests twice
Signed-off-by: Iliyan Malchev <malchev@google.com>
On tegra, the UTMIP PAD control logic is common to all utmip phys and
are controlled from usb1. This adds a reference count to turn off the
pads when all utmip phy are off.
Change-Id: I3537d5cc52df929f817e547a79da235394d2c265
Signed-off-by: Benoit Goby <benoit@android.com>
-- add audio_in_stream (identical to audio_out_stream, may merge them later)
-- add support for DMA and PIO recording
-- add ioctls for /dev/audio<n>_in to start and stop recording
Signed-off-by: Iliyan Malchev <malchev@google.com>
Notable ommisions:
* support for anything but lvds panels
* inegration with nvhost driver to sync updates with 3D
* FB physical geometry is not set
* lacks interface to set overlay/window x,y offset
v2 changes:
* suspend/resume support
* move code into drivers/video/tegra/dc
* modularize output support
* clean register dumping, add debugfs register file
* code review feedback
* make the display controller register the framebuffer devices
Signed-off-by: Erik Gilling <konkers@android.com>
add support for system suspend to ventana; currently LP1 (DRAM in
self-refresh, CPU power-gated, core power active) is used.
Change-Id: Idb223a7da94c3b87ea61e0eef1de77206c4171e4
Signed-off-by: Gary King <gking@nvidia.com>
register I2C controllers, regulator consumers and the panjit
touchscreen platform_device
Change-Id: Ife13c0d86084f26c734dea2c358f8c4fd3e27a8e
Signed-off-by: Gary King <gking@nvidia.com>
tegra's DMA controller expects to start transfers at word boundaries,
and the standard packet alignment (2) was resulting in data corruption
also, provide a full cacheline of padding between skbuffs, to eliminate
coherency issues between the processor and USB networking devices.
Change-Id: Ibb508b512f43c8934d35eb182c8738370b7be585
Signed-off-by: Gary King <gking@nvidia.com>
-- i2s settings are passed through the board file
-- supports playback (no recording yet)
-- works in DMA and PIO (non-DMA) modes (toggle through debugfs)
-- does NOT perform volume and audio-path control
-- exports /dev/audio<n>_{in, out}, where <n> is the i2s interface
-- assumes that i2s is used such that fifo1 is TX and fifo2 is RX
Signed-off-by: Iliyan Malchev <malchev@google.com>
Don't share tegra_usb1_resources as both tegra-udc and ehci1 are loaded
in otg mode.
Change-Id: Id5c9a076572e18662b5d3e7835f638b1cc5a1e07
Signed-off-by: Benoit Goby <benoit@android.com>
update harmony and ventana to use the common UDC definition, rather
than using the current duplicated definitions
Change-Id: I2e3aca674ab35305a0c516bd22e044382280d05e
Signed-off-by: Gary King <gking@nvidia.com>
Check the transceiver state before checking udc->stopped
Enable/disable the PHY and the clock on cable events
Change-Id: Id5a8a1b94f83da8060786f31181014dd1d546fc7
Signed-off-by: Benoit Goby <benoit@android.com>
The Tegra IOVMM is an interface to allow device drivers and subsystems in
the kernel to manage the virtual memory spaces visible to I/O devices.
The interface has been designed to be scalable to allow for I/O virtual
memory hardware which exists in one or more limited apertures of the address
space (e.g., a small aperture in physical address space which can perform
MMU-like remapping) up to complete virtual addressing with multiple
address spaces and memory protection.
The interface has been designed to be similar to the Linux virtual memory
system; however, operations which would be difficult to implement or
nonsensical for DMA devices (e.g., copy-on-write) are not present, and
APIs have been added to allow for management of multiple simultaneous
active address spaces.
The API is broken into four principal objects: areas, clients, domains and
devices.
Areas
=====
An area is a contiguous region of the virtual address space which can be
filled with virtual-to-physical translations (and, optionally, protection
attributes). The virtual address of the area can be queried and used for
DMA operations by the client which created it.
As with the Linux vm_area structures, it is the responsibility of whichever
code creates an area to ensure that it is populated with appropriate
translations.
Domains
=======
A domain in the IOVMM system is similar to a process in a standard CPU
virtual memory system; it represents the entire range of virtual addresses
which may be allocated and used for translation. Depending on hardware
capabilities, one or more domains may be resident and available for
translation. IOVMM areas are allocated from IOVMM domains.
Whenever a DMA operation is performed to or from an IOVMM area, its parent
domain must be made resident prior to commencing the operation.
Clients
=======
I/O VMM clients represent any entity which needs to be able to allocate
and map system memory into I/O virtual space. Clients are created by name
and may be created as part of a "share group," where all clients created
in the same share group will observe the same I/O virtual space (i.e., all
will use the same IOVMM domain). This is similar to threads inside a process
in the CPU virtual memory manager.
The callers of the I/O VMM system are responsible for deciding on the
granularity of client creation and share group definition; depending on the
specific usage model expected by the caller, it may be appropriate to create
an IOVMM client per task (if the caller represents an ioctl'able interface
to user land), an IOVMM client per driver instance, a common IOVMM client
for an entire bus, or a global IOVMM client for an OS subsystem (e.g., the DMA
mapping interface).
Each client is responsible for ensuring that its IOVMM client's translation is
resident on the system prior to performing DMA operations using the IOVMM
addresses. This is accomplished by preceding all DMA operations for the client
with a call to tegra_iovmm_client_lock (or tegra_iovmm_client_trylock),
and following all operations (once complete) with a call to
tegra_iovmm_client_unlock. In this regard, clients are cooperatively context-
switched, and are expected to behave appropriately.
Devices
=======
I/O VMM devices are the physical hardware which is responsible for performing
the I/O virtual-to-physical translation.
Devices are responsible for domain management: the mapping and unmapping
operations needed to make translations resident in the domain (including
any TLB shootdown or cache invalidation needed to ensure coherency), locking
and unlocking domains as they are made resident by clients into the devices'
address space(s), and allocating and deallocating the domain objects.
Devices are responsible for the allocation and deallocation of domains to
allow coalescing of multiple client share groups into a single domain. For
example, if the device's hardware only allows a single address space to
be translated system-wide, performing full flushes and invalidates of the
translation at every client switch may be prohibitively expensive. In these
circumstances, a legal implementation of the IOVMM interface includes
returning the same domain for all clients on the system (regardless of
the originally-specified share group).
In this respect, a client can be assured that it will share an address space
with all of the other clients in its share group; however, it may also share
this address space with other clients, too.
Multiple devices may be present in a system; a device should return a NULL
domain if it is incapable of servicing the client when it is asked to
allocate a domain.
----------------------------------------------------------------------------
IOVMM Client API
================
tegra_iovmm_alloc_client - Called to create a new IOVMM client object; the
implementation may create a new domain or return an existing one depending on
both the device and the share group.
tegra_iovmm_free_client - Frees a client.
tegra_iovmm_client_lock - Makes a client's translations resident in the IOVMM
device for subsequent DMA operations. May block if the device is incapable
of context-switching the client when it is called. Returns -EINTR if the
waiting thread is interrupted before the client is locked.
tegra_iovmm_client_trylock - Non-blocking version of tegra_iovmm_client_lock
tegra_iovmm_client_unlock - Called by clients after DMA operations on IOVMM-
translated addresses is complete; allows IOVMM system to context-switch the
current client out of the device if needed.
tegra_iovmm_create_vm - Called to allocate an IOVMM area. If
lazy / demand-loading of pages is desired, clients should supply a pointer
to a tegra_iovmm_area_ops structure providing callback functions to load, pin
and unpin the physical pages which will be mapped into this IOVMM region.
tegra_iovmm_get_vm_size - Called to query the total size of an IOVMM client
tegra_iovmm_free_vm - Called to free a IOVMM area, releasing any pinned
physical pages mapped by it and to decommit any resources (memory for
PTEs / PDEs) required by the VM area.
tegra_iovmm_vm_insert_pfn - Called to insert an exact pfn (system memory
physical page) into the area at a specific virtual address. Illegal to call
if the IOVMM area was originally created with lazy / demand-loading.
tegra_iovmm_zap_vm - Called to mark all mappings in the IOVMM area as
invalid / no-access, but continues to consume the I/O virtual address space.
For lazy / demand-loaded IOVMM areas, a zapped region will not be reloaded
until it has been unzapped; DMA operations using the affected translations
may fault (if supported by the device).
tegra_iovmm_unzap_vm - Called to re-enable lazy / demand-loading of pages
for a previously-zapped IOVMM area.
tegra_iovmm_find_area_get - Called to find the IOVMM area object
corresponding to the specified I/O virtual address, or NULL if the address
is not allocated in the client's address space. Increases the reference count
on the IOVMM area object
tegra_iovmm_area_get - Called to increase the reference count on the IOVMM
area object
tegra_iovmm_area_put - Called to decrease the reference count on the IOVMM
area object
IOVMM Device API
================
tegra_iovmm_register - Called to register a new IOVMM device with the IOVMM
manager
tegra_iovmm_unregister - Called to remove an IOVMM device from the IOVMM
manager (unspecified behavior if called while a translation is active and / or
in-use)
tegra_iovmm_domain_init - Called to initialize all of the IOVMM manager's
data structures (block trees, etc.) after allocating a new domain
IOVMM Device HAL
================
map - Called to inform the device about a new lazy-mapped IOVMM area. Devices
may load the entire VM area when this is called, or at any time prior to
the completion of the first read or write operation using the translation.
unmap - Called to zap or to decommit translations
map_pfn - Called to insert a specific virtual-to-physical translation in the
IOVMM area
lock_domain - Called to make a domain resident; should return 0 if the
domain was successfully context-switched, non-zero if the operation can
not be completed (e.g., all available simultaneous hardware translations are
locked). If the device can guarantee that every domain it allocates is
always usable, this function may be NULL.
unlock_domain - Releases a domain from residency, allows the hardware
translation to be used by other domains.
alloc_domain - Called to allocate a new domain; allowed to return an
existing domain
free_domain - Called to free a domain.
Change-Id: Ic65788777b7aba50ee323fe16fd553ce66c4b87c
Signed-off-by: Gary King <gking@nvidia.com>
Moved usb phy initialization code
Added support for usb3 utmi phy
Updated the registers as recommended by Nvidia to be MUCH closer to passing the integrity tests
TODO: Add support for usb2 ulpi phy
Signed-off-by: Benoit Goby <benoit@android.com>
