Use DEBUG_WAKEUP flag to show wakelocks that abort suspend, in
addition to showing wakelocks held during system resume.
DEBUG_WAKEUP is enabled by default.
Change-Id: If6fa68e8afbc482a5300ffab2964694b02b34f41
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Some otg_id handlers can detect what's connected but can't detect a change.
This allows that handler to pass off the waiting for ID change to a proxy.
Change-Id: Ib38b750c3da4bffc35e37b620ecee37c5d64d31f
Signed-off-by: Erik Gilling <konkers@android.com>
* Allow tracking interfaces that only have an ipv6 address.
Deal with ipv6 notifier chains that do NETDEV_UP without the rtnl_lock()
* Allow root all access to procfs ctrl/stats.
To disable all checks:
echo 0 > /sys/module/xt_qtaguid/parameters/ctrl_write_gid
echo 0 > /sys/module/xt_qtaguid/parameters/stats_readall_gid
* Add CDEBUG define to enable pr_debug output specific to
procfs ctrl/stats access.
Change-Id: I9a469511d92fe42734daff6ea2326701312a161b
Signed-off-by: JP Abgrall <jpa@google.com>
* Added support for sets of counters.
By default set 0 is active.
Userspace can control which set is active for a given UID by
writing to .../ctrl
s <set_num> <uid>
Changing the active set is only permitted for processes in the
AID_NET_BW_ACCT group.
The active set tracking is reset when the uid tag is deleted with
the .../ctrl command
d 0 <uid>
* New output format for the proc .../stats
- Now has cnt_set in the list.
"""
idx iface acct_tag_hex uid_tag_int cnt_set rx_bytes rx_packets tx_bytes tx_packets rx_tcp_packets rx_tcp_bytes rx_udp_packets rx_udp_bytes rx_other_packets rx_other_bytes tx_tcp_packets tx_tcp_bytes tx_udp_packets tx_udp_bytes tx_other_packets tx_other_bytes
...
2 rmnet0 0x0 1000 0 27729 29 1477 27 27501 26 228 3 0 0 1249 24 228 3 0 0
2 rmnet0 0x0 1000 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 rmnet0 0x0 10005 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 rmnet0 0x0 10005 1 46407 57 8008 64 46407 57 0 0 0 0 8008 64 0 0 0 0
...
6 rmnet0 0x7fff000100000000 10005 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 rmnet0 0x7fff000100000000 10005 1 27493 24 1564 22 27493 24 0 0 0 0 1564 22 0 0 0 0
"""
* Refactored for proc stats output code.
* Silenced some of the per packet debug output.
* Reworded some of the debug messages.
* Replaced all the spin_lock_irqsave/irqrestore with *_bh():
netfilter handling is done in softirq.
Change-Id: Ibe89f9d754579fd97335617186c614b43333cfd3
Signed-off-by: JP Abgrall <jpa@google.com>
-- init rb nodes in ion_handle_create
-- in ion_handle_destroy, check that a node belongs to a tree before removing
it (safety check, does not happen right now)
-- mark as static functions used only inside ion.c
-- update comments to ion_share() with a relevant blurb from the implementation
-- other minor updates/typo fixes to comments
Signed-off-by: Iliyan Malchev <malchev@google.com>
L2CAP connection timeout needs to be assigned as miliseconds
and not as jiffies.
Signed-off-by: Chen Ganir <chen.ganir@ti.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
If the wakelock driver aborts suspend due to an already-held
wakelock, don't report the next wakelock held as the "wake up
wakelock".
Change-Id: I582ffbb87a3c361739a77d839a0c62921cff11a6
Signed-off-by: Todd Poynor <toddpoynor@google.com>
* Sends event/data packets to kernel while net_device interface
has not been created or registered yet
* Timer gets freed twice
* The primary net_device interface never gets freed
* Memory corruption in scan buffer
* Memory corruption in cfg80211 wiphy structure fix for kthred_stop crash
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Update the code to handle some of the differences between
RFC 3041 and RFC 4941, which obsoletes it. Also a couple
of janitorial fixes.
- Allow router advertisements to increase the lifetime of
temporary addresses. This was not allowed by RFC 3041,
but is specified by RFC 4941. It is useful when RA
lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME:
in this case, the previous code would delete or deprecate
addresses prematurely.
- Change the default of MAX_RETRY to 3 per RFC 4941.
- Add a comment to clarify that the preferred and valid
lifetimes in inet6_ifaddr are relative to the timestamp.
- Shorten lines to 80 characters in a couple of places.
Change-Id: I4da097664d4b1de7c1cebf410895319601c7f1cc
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
Fix race condition which can result in missing wakeup during
l2cap socket shutdown.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix race condition which can result in missing the wakeup intended
to stop the session thread.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix race conditions which can cause lost wakeups (or missed signals)
while waiting to accept a sco socket connection.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix race conditions which can cause lost wakeups (or misssed signals)
while waiting to accept an l2cap socket connection.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix race conditions which can cause lost wakeups while waiting
for sock state to change.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix race conditions which can cause lost wakeups (or missed
signals) while waiting to accept an rfcomm socket connection.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Removed superfluous event handling which was used to signal
that the rfcomm kthread had been woken. This appears to have been
used to prevent lost wakeups. Correctly ordering when the task
state is set to TASK_INTERRUPTIBLE is sufficient to prevent lost wakeups.
To prevent wakeups which occurred prior to initially setting
TASK_INTERRUPTIBLE from being lost, the main work of the thread loop -
rfcomm_process_sessions() - is performed prior to sleeping.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Fix unremoved monitor interface problem after killing hostapd.
Add WPS support for hostapd.
Change-Id: I4e476fafb203592fcdf5c15a526b67d4aa78df3e
Signed-off-by: Howard M. Harte <hharte@broadcom.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
The IRQ name has moved to the struct irqaction list (so print
first action's name).
Change-Id: I65a627457f9abaf7c1dcc32d8814243ba2ff4717
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This would cause log spam to the point of slowing down the system.
Change-Id: I5655f0207935004b0198f43ad0d3c9ea25466e4e
Signed-off-by: JP Abgrall <jpa@google.com>
* uid handling
- Limit UID impersonation to processes with a gid in AID_NET_BW_ACCT.
This affects socket tagging, and data removal.
- Limit stats lookup to own uid or the process gid is in AID_NET_BW_STATS.
This affects stats lookup.
* allow pacifying the module
Setting passive to Y/y will make the module return immediately on
external stimulus.
No more stats and silent success on ctrl writes.
Mainly used when one suspects this module of misbehaving.
Change-Id: I83990862d52a9b0922aca103a0f61375cddeb7c4
Signed-off-by: JP Abgrall <jpa@google.com>
* Add a new ctrl command to delete stored data.
d <acct_tag> [<uid>]
The uid will default to the running process's.
The accounting tag can be 0, in which case all counters and socket tags
associated with the uid will be cleared.
* Simplify the ctrl command handling at the expense of duplicate code.
This should make it easier to maintain.
* /proc/net/xt_qtaguid/stats now returns more stats
idx iface acct_tag_hex uid_tag_int
{rx,tx}_{bytes,packets}
{rx,tx}_{tcp,udp,other}_{bytes,packets}
the {rx,tx}_{bytes,packets} are the totals.
* re-tagging will now allow changing the uid.
Change-Id: I9594621543cefeab557caa3d68a22a3eb320466d
Signed-off-by: JP Abgrall <jpa@google.com>
This uses the NETLINK NETLINK_NFLOG family to log a single message
when the quota limit is reached.
It uses the same packet type as ipt_ULOG, but
- never copies skb data,
- uses 112 as the event number (ULOG's +1)
It doesn't log if the module param "event_num" is 0.
Change-Id: I6f31736b568bb31a4ff0b9ac2ee58380e6b675ca
Signed-off-by: JP Abgrall <jpa@google.com>
Add monitor interface support and fix cfg80211 management frame isses
Add support for hostapd
Use private command to get p2p device address
Change-Id: Ie490e38f1af9f259ff4a96b2f7d367119c65c377
Signed-off-by: Howard M. Harte <hharte@broadcom.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
when enabled, prints out the function of each handler as they are called
Change-Id: I5ed251867e0e3aa3cd05f030ff3579808cedd0c2
Signed-off-by: Erik Gilling <konkers@android.com>
