[ Upstream commit 9f99caa8950a76f560a90074e3a4b93cfa8b3d84 ]
This was reported by the KUnit tests in the later patches.
See MS-ERREF 2.3.1 STATUS_UNABLE_TO_FREE_VM. Keep it consistent with the
value in the documentation.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a8fc27dd668e7562b5326b5ed2f1604cb1e2e9 ]
When automounting, the fs_context should be fixed up to use the cred
from the parent filesystem, since the operation is just extending the
namespace. Authorisation to enter that namespace will already have been
provided by the preceding lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e47c3cc64b44b0b06cd68c2801db92ff143f2b2 ]
We have observed an NFSv4 client receiving a LOCK reply with a status of
NFS4ERR_OLD_STATEID and subsequently retrying the LOCK request with an
earlier seqid value in the stateid. As this was for a new lockowner,
that would imply that nfs_set_open_stateid_locked() had updated the open
stateid seqid with an earlier value.
Looking at nfs_set_open_stateid_locked(), if the incoming seqid is out
of sequence, the task will sleep on the state->waitq for up to 5
seconds. If the task waits for the full 5 seconds, then after finishing
the wait it'll update the open stateid seqid with whatever value the
incoming seqid has. If there are multiple waiters in this scenario,
then the last one to perform said update may not be the one with the
highest seqid.
Add a check to ensure that the seqid can only be incremented, and add a
tracepoint to indicate when old seqids are skipped.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8581b19eb2c5ccf06c195d3b5468c3c9d17a5020 ]
There is reported 'scheduling while atomic' bug when using dm-snapshot on
real-time kernels. The reason for the bug is that the hlist_bl code does
preempt_disable() when taking the lock and the kernel attempts to take
other spinlocks while holding the hlist_bl lock.
Fix this by converting a hlist_bl spinlock into a regular spinlock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fedadc4137234c3d00c4785eeed3e747fe9036ae ]
gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.
The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.
Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().
[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 809ef03d6d21d5fea016bbf6babeec462e37e68c ]
In the csky_cmpxchg_fixup function, it is incorrect to use the global
variable csky_cmpxchg_stw to determine the address where the exception
occurred.The global variable csky_cmpxchg_stw stores the opcode at the
time of the exception, while &csky_cmpxchg_stw shows the address where
the exception occurred.
Signed-off-by: Yang Li <yang.li85200@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 913f7cf77bf14c13cfea70e89bcb6d0b22239562 upstream.
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL.
Reported-by: Aurélien Couderc <aurelien.couderc2002@gmail.com>
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Cc: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 442d27ff09a218b61020ab56387dbc508ad6bfa6 upstream.
When security labeling is enabled, the client can pass a file security
label as part of a create operation for the new file, similar to mode
and other attributes. At present, the security label is received by nfsd
and passed down to nfsd_create_setattr(), but nfsd_setattr() is never
called and therefore the label is never set on the new file. This bug
may have been introduced on or around commit d6a97d3f58 ("NFSD:
add security label to struct nfsd_attrs"). Looking at nfsd_setattr()
I am uncertain as to whether the same issue presents for
file ACLs and therefore requires a similar fix for those.
An alternative approach would be to introduce a new LSM hook to set the
"create SID" of the current task prior to the actual file creation, which
would atomically label the new inode at creation time. This would be better
for SELinux and a similar approach has been used previously
(see security_dentry_create_files_as) but perhaps not usable by other LSMs.
Reproducer:
1. Install a Linux distro with SELinux - Fedora is easiest
2. git clone https://github.com/SELinuxProject/selinux-testsuite
3. Install the requisite dependencies per selinux-testsuite/README.md
4. Run something like the following script:
MOUNT=$HOME/selinux-testsuite
sudo systemctl start nfs-server
sudo exportfs -o rw,no_root_squash,security_label localhost:$MOUNT
sudo mkdir -p /mnt/selinux-testsuite
sudo mount -t nfs -o vers=4.2 localhost:$MOUNT /mnt/selinux-testsuite
pushd /mnt/selinux-testsuite/
sudo make -C policy load
pushd tests/filesystem
sudo runcon -t test_filesystem_t ./create_file -f trans_test_file \
-e test_filesystem_filetranscon_t -v
sudo rm -f trans_test_file
popd
sudo make -C policy unload
popd
sudo umount /mnt/selinux-testsuite
sudo exportfs -u localhost:$MOUNT
sudo rmdir /mnt/selinux-testsuite
sudo systemctl stop nfs-server
Expected output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: unconfined_u:object_r:test_filesystem_filetranscon_t:s0
File context is correct
Actual output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: system_u:object_r:test_file_t:s0
File context error, expected:
test_filesystem_filetranscon_t
got:
test_file_t
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 913f7cf77bf1 ("NFSD: NFSv4 file creation neglects setting ACL")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24d92de9186ebc340687caf7356e1070773e67bc upstream.
The main point of the guarded SETATTR is to prevent races with other
WRITE and SETATTR calls. That requires that the check of the guard time
against the inode ctime be done after taking the inode lock.
Furthermore, we need to take into account the 32-bit nature of
timestamps in NFSv3, and the possibility that files may change at a
faster rate than once a second.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 442d27ff09a2 ("nfsd: set security label during create operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dbf1d590d10a6d1978e8184f8dfe20af22d680a upstream.
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Keerthana: Backported the patch to v6.6.y ]
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5548c318d6520d4fa3c5ed6003eeb710763cbc5 upstream.
Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages. This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.
This patch replaces the per-address lookup with a range walk using
walk_page_range(). The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups. This problem was
previously discussed in [1].
Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;
int main() {
char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);
if (area == MAP_FAILED) {
perror("mmap() failed\n");
return -1;
}
/* Populate a single page such that we get an anon_vma. */
*area = 0;
/* Enable KSM. */
madvise(area, size, MADV_MERGEABLE);
pause();
return 0;
}
$ ./ksm-sparse &
$ echo 1 > /sys/kernel/mm/ksm/run
Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page. This makes ksmd essentially deadlocked
not able to deduplicate anything of value. With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu.
Link: https://lkml.kernel.org/r/20251023035841.41406-1-pedrodemargomes@gmail.com
Link: https://lkml.kernel.org/r/20251022153059.22763-1-pedrodemargomes@gmail.com
Link: https://lore.kernel.org/linux-mm/423de7a3-1c62-4e72-8e79-19a6413e420c@redhat.com/ [1]
Fixes: 31dbd01f31 ("ksm: Kernel SamePage Merging")
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: craftfever <craftfever@airmail.cc>
Closes: https://lkml.kernel.org/r/020cf8de6e773bb78ba7614ef250129f11a63781@murena.io
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ change page to folios ]
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0fe2994f9a9d0a2ec9e42441ea5ba74b6a16176 upstream.
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11194b416ef95012c2cfe5f546d71af07b639e93 upstream.
When a fault occurs, the connection is abandoned, reestablished, and any
pending operations are retried. The OSD client tracks the progress of a
sparse-read reply using a separate state machine, largely independent of
the messenger's state.
If a connection is lost mid-payload or the sparse-read state machine
returns an error, the sparse-read state is not reset. The OSD client
will then interpret the beginning of a new reply as the continuation of
the old one. If this makes the sparse-read machinery enter a failure
state, it may never recover, producing loops like:
libceph: [0] got 0 extents
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
Therefore, reset the sparse-read state in osd_fault(), ensuring retries
start from a clean state.
Cc: stable@vger.kernel.org
Fixes: f628d79997 ("libceph: add sparse read support to OSD client")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e84b48d31b5008932c0a0902982809fbaa1d3b70 upstream.
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature().
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3fe30e57649c551757a02e1cad073c47e1e075e upstream.
free_choose_arg_map() may dereference a NULL pointer if its caller fails
after a partial allocation.
For example, in decode_choose_args(), if allocation of arg_map->args
fails, execution jumps to the fail label and free_choose_arg_map() is
called. Since arg_map->size is updated to a non-zero value before memory
allocation, free_choose_arg_map() will iterate over arg_map->args and
dereference a NULL pointer.
To prevent this potential NULL pointer dereference and make
free_choose_arg_map() more resilient, add checks for pointers before
iterating.
Cc: stable@vger.kernel.org
Co-authored-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e00c3f71b5cf75681dbd74ee3f982a99cb690c2b upstream.
If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG. Instead, just declare the incremental osdmap to be invalid.
Cc: stable@vger.kernel.org
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23f9485510c338476b9735d516c1d4aacb810d46 upstream.
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/
Fixes: a55ebd47f2 ("counter: add IRQ or GPIO based counter")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9517d76dd160208b7a432301ce7bec8fc1ddc305 upstream.
quad8_irq_handler() should return irqreturn_t enum values, but it
directly returns negative errno codes from regmap operations on error.
Return IRQ_NONE if the interrupt status cannot be read. If clearing the
interrupt fails, return IRQ_HANDLED to prevent the kernel from disabling
the IRQ line due to a spurious interrupt storm. Also, log these regmap
failures with dev_WARN_ONCE.
Fixes: 98ffe02529 ("counter: 104-quad-8: Migrate to the regmap API")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251215020114.1913-1-vulab@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ba0b6461bc4edb3005ea6e00cdae189bcf908a5 upstream.
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.2629] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[87.2637] CR2: 00007ffc9ec33b98 CR3: 000000011273e003 CR4: 0000000000370ef0
[87.2648] Call Trace:
[87.2651] <TASK>
[87.2654] btrfs_unlink_inode+0x15/0x40 [btrfs]
[87.2661] unlink_inode_for_log_replay+0x27/0xf0 [btrfs]
[87.2669] check_item_in_log+0x1ea/0x2c0 [btrfs]
[87.2676] replay_dir_deletes+0x16b/0x380 [btrfs]
[87.2684] fixup_inode_link_count+0x34b/0x370 [btrfs]
[87.2696] fixup_inode_link_counts+0x41/0x160 [btrfs]
[87.2703] btrfs_recover_log_trees+0x1ff/0x7c0 [btrfs]
[87.2711] ? __pfx_replay_one_buffer+0x10/0x10 [btrfs]
[87.2719] open_ctree+0x10bb/0x15f0 [btrfs]
[87.2726] btrfs_get_tree.cold+0xb/0x16c [btrfs]
[87.2734] ? fscontext_read+0x15c/0x180
[87.2740] ? rw_verify_area+0x50/0x180
[87.2746] vfs_get_tree+0x25/0xd0
[87.2750] vfs_cmd_create+0x59/0xe0
[87.2755] __do_sys_fsconfig+0x4f6/0x6b0
[87.2760] do_syscall_64+0x50/0x1220
[87.2764] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[87.2770] RIP: 0033:0x7f7b9625f4aa
[87.2775] Code: 73 01 c3 48 (...)
[87.2803] RSP: 002b:00007ffc9ec35b08 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
[87.2817] RAX: ffffffffffffffda RBX: 0000558bfa91ac20 RCX: 00007f7b9625f4aa
[87.2829] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
[87.2842] RBP: 0000558bfa91b120 R08: 0000000000000000 R09: 0000000000000000
[87.2854] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[87.2864] R13: 00007f7b963f1580 R14: 00007f7b963f326c R15: 00007f7b963d8a23
[87.2877] </TASK>
[87.2882] ---[ end trace 0000000000000000 ]---
[87.2891] BTRFS: error (device dm-0 state A) in __btrfs_unlink_inode:4345: errno=-2 No such entry
[87.2904] BTRFS: error (device dm-0 state EAO) in do_abort_log_replay:191: errno=-2 No such entry
[87.2915] BTRFS critical (device dm-0 state EAO): log tree (for root 5) leaf currently being processed (slot 7 key (258 12 257)):
[87.2929] BTRFS info (device dm-0 state EAO): leaf 30736384 gen 10 total ptrs 7 free space 15712 owner 18446744073709551610
[87.2929] BTRFS info (device dm-0 state EAO): refs 3 lock_owner 0 current 638968
[87.2929] item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
[87.2929] inode generation 9 transid 10 size 0 nbytes 0
[87.2929] block group 0 mode 40755 links 1 uid 0 gid 0
[87.2929] rdev 0 sequence 7 flags 0x0
[87.2929] atime 1765464494.678070921
[87.2929] ctime 1765464494.686606513
[87.2929] mtime 1765464494.686606513
[87.2929] otime 1765464494.678070921
[87.2929] item 1 key (257 INODE_REF 256) itemoff 16109 itemsize 14
[87.2929] index 4 name_len 4
[87.2929] item 2 key (257 DIR_LOG_INDEX 2) itemoff 16101 itemsize 8
[87.2929] dir log end 2
[87.2929] item 3 key (257 DIR_LOG_INDEX 3) itemoff 16093 itemsize 8
[87.2929] dir log end 18446744073709551615
[87.2930] item 4 key (257 DIR_INDEX 3) itemoff 16060 itemsize 33
[87.2930] location key (258 1 0) type 1
[87.2930] transid 10 data_len 0 name_len 3
[87.2930] item 5 key (258 INODE_ITEM 0) itemoff 15900 itemsize 160
[87.2930] inode generation 9 transid 10 size 0 nbytes 0
[87.2930] block group 0 mode 100644 links 1 uid 0 gid 0
[87.2930] rdev 0 sequence 2 flags 0x0
[87.2930] atime 1765464494.678456467
[87.2930] ctime 1765464494.686606513
[87.2930] mtime 1765464494.678456467
[87.2930] otime 1765464494.678456467
[87.2930] item 6 key (258 INODE_REF 257) itemoff 15887 itemsize 13
[87.2930] index 3 name_len 3
[87.2930] BTRFS critical (device dm-0 state EAO): log replay failed in unlink_inode_for_log_replay:1045 for root 5, stage 3, with error -2: failed to unlink inode 256 parent dir 259 name subvol root 5
[87.2963] BTRFS: error (device dm-0 state EAO) in btrfs_recover_log_trees:7743: errno=-2 No such entry
[87.2981] BTRFS: error (device dm-0 state EAO) in btrfs_replay_log:2083: errno=-2 No such entry (Failed to recover log tr
So fix this by changing copy_inode_items_to_log() to always detect if
there are conflicting inodes for the ref/extref of the inode being logged
even if the inode was created in a past transaction.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2857bd59feb63fcf40fe4baf55401baea6b4feb4 upstream.
Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.
We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.
nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.
However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it. For this we
add a new flag protected with nn->client_lock. It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.
So this patch adds a nfsd_net field "client_tracking_active" which is
set as described. Another field "grace_end_forced", is set when
v4_end_grace is written. After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.
This resolves a race which can result in use-after-free.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/linux-nfs/20250623030015.2353515-1-neil@brown.name/T/#t
Fixes: 7f5ef2e900 ("nfsd: add a v4_end_grace file to /proc/fs/nfsd")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e901c7fce59e72d9f3c92733c379849c4034ac50 upstream.
Commit abc02e5602f7 ("NFSD: Support write delegations in LAYOUTGET")
added NFSD_MAY_OWNER_OVERRIDE to the access flags passed from
nfsd4_layoutget() to fh_verify(). This causes LAYOUTGET to fail for
executable-only files, and causes xfstests generic/126 to fail on
pNFS SCSI.
To allow read access to executable-only files, what we really want is:
1. The "permissions" portion of the access flags (the lower 6 bits)
must be exactly NFSD_MAY_READ
2. The "hints" portion of the access flags (the upper 26 bits) can
contain any combination of NFSD_MAY_OWNER_OVERRIDE and
NFSD_MAY_READ_IF_EXEC
Fixes: abc02e5602f7 ("NFSD: Support write delegations in LAYOUTGET")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2187431c395cdfbf144e3536f25468c64fc7cfa upstream.
Commit 985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash") properly rejects volumes where
s_def_hash_version is set to DX_HASH_SIPHASH, but the check and the
error message should not look into casefold setup - a filesystem should
never have DX_HASH_SIPHASH as the default hash. Fix it and, since we
are there, move the check to ext4_hash_info_init.
Fixes:985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/87jzg1en6j.fsf_-_@mailhost.krisman.be
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In scmi_devm_notifier_unregister(), the notifier-block argument was ignored
and never passed to devres_release(). As a result, the function always
returned -ENOENT and failed to unregister the notifier.
Drivers that depend on this helper for teardown could therefore hit
unexpected failures, including kernel panics.
Commit 264a2c520628 ("firmware: arm_scmi: Simplify scmi_devm_notifier_unregister")
removed the faulty code path during refactoring and hence this fix is not
required upstream.
Cc: <stable@vger.kernel.org> # 5.15.x, 6.1.x, and 6.6.x
Fixes: 5ad3d1cf7d ("firmware: arm_scmi: Introduce new devres notification ops")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Amitai Gottlieb <amitaig@hailo.ai>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7346e7a058a2 ("pwm: stm32: Always do lazy disabling") triggered a
regression where PWM polarity changes could be ignored.
stm32_pwm_set_polarity() was skipped due to a mismatch between the
cached pwm->state.polarity and the actual hardware state, leaving the
hardware polarity unchanged.
Fixes: 7edf736920 ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org # <= 6.12
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Co-developed-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
commit cbefe2ffa7784525ec5d008ba87c7add19ec631a upstream.
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code.
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Fixes: 8572aec3d0 ("net: stmmac: Add basic EST support for XGMAC")
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-2-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The context change is due to the commit c3f3b97238f6
("net: stmmac: Refactor EST implementation")
which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5326ab737a47278dbd16ed3ee7380b26c7056ddd upstream.
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf298c01b7fdb08eef5b6b26d0fe98d48134d72 upstream.
damon_test_update_monitoring_result() is assuming all dynamic memory
allocation in it will succeed. Those are indeed likely in the real use
cases since those allocations are too small to fail, but theoretically
those could fail. In the case, inappropriate memory access can happen.
Fix it by appropriately cleanup pre-allocated memory and skip the
execution of the remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-12-sj@kernel.org
Fixes: f4c978b659 ("mm/damon/core-test: add a test for damon_update_monitoring_results()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 915a2453d824a9b6bf724e3f970d86ae1d092a61 upstream.
damon_test_set_attrs() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-13-sj@kernel.org
Fixes: aa13779be6 ("mm/damon/core-test: add a test for damon_set_attrs()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f835f4e8c863985f15abd69db033c2f66546094 upstream.
damon_test_ops_registration() is assuming all dynamic memory allocation in
it will succeed. Those are indeed likely in the real use cases since
those allocations are too small to fail, but theoretically those could
fail. In the case, inappropriate memory access can happen. Fix it by
appropriately cleanup pre-allocated memory and skip the execution of the
remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-10-sj@kernel.org
Fixes: 4f540f5ab4 ("mm/damon/core-test: add a kunit test case for ops registration")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d14d5671e7c9cc788c5a1edfa94e6f9064275905 upstream.
damon_test_filter_out() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-16-sj@kernel.org
Fixes: 26713c8908 ("mm/damon/core-test: add a unit test for __damos_filter_out()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
