drivers/input/touchscreen/gt1x/gt1x_tools.c:104:6: warning: no previous prototype for gt1x_deinit_tool_nodeâ [-Wmissing-prototypes]
drivers/input/touchscreen/gt1x/gt1x_tools.c:79:5: warning: no previous prototype for gt1x_init_tool_nodeâ [-Wmissing-prototypes]
drivers/input/touchscreen/gt1x/gt1x_update.c:199:5: warning: no previous prototype for gt1x_i2c_write_with_readbackâ [-Wmissing-prototypes]
drivers/input/touchscreen/gt1x/gt1x_update.c:218:5: warning: no previous prototype for getUintâ [-Wmissing-prototypes]
drivers/input/touchscreen/gt1x/gt1x_update.c:750:5: warning: no previous prototype for __gt1x_hold_ss51_dsp_20â [-Wmissing-prototypes]
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ic689a12dd469e7a4a6f306cbbad065903cf90891
drivers/mtd/spi-nor/core.c:736:5: warning: no previous prototype for ‘spi_nor_wait_till_ready_with_msleep’ [-Wmissing-prototypes]
Fixes a7b3870670 ("mtd: spi-nor: core: Change to use msleep for erase ops")
Change-Id: If2add4f5614f5337b5bd872db8a1b5149b7c4221
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
HDMI avmute is sent via GCP. If HDMI want to use
the avmute function, GCP must be sent.
Change-Id: Id844ea93c5296e1a5cf200f9ccf7bd2effd13e82
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Set to the minimum value of the vcom voltage to make the regulator
happy.
Change-Id: I32d7c52eda3ee7c40047d2dd7630f3d9303323e7
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
error state may lead to reduce fps with offline camera when used dual camera
Signed-off-by: Zefa Chen <zefa.chen@rock-chips.com>
Change-Id: Ie45039ac7ff7ab65d02acde7aad0b6789f793738
If the value of covert_mode and csc_coef not initialize, the
compile will assign a default value which may be different by
different compiles. It should initialize their default value
explicitly before use.
Fixes: c08d820f80 ("drm/rockchip: vop2: Support post csc color range convert")
Change-Id: I39be672d6f8fda8fdf8298eafe140f449da32e46
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
1. Ensure that the PKA and ECC modules can be switched over.
2. Improve the security of verify to prevent all zeros from
being treated as the correct result in some exceptions.
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Change-Id: If7cdc418cb3285fa7fb905381bfea51587750ee5
The regs overlay_mode/dclk_ddr/rgb_dclk_pol are unsupported, so
it is better to remove them.
Change-Id: I2f48b15c0bfc58eca6e21b7ec1a64724ecc0e359
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Use SNDRV_PCM_RATE_CONTINUOUS to support continuous range
sample rate, which can support any rate in range.
e.g.
48048, 31000, 768000
SNDRV_PCM_RATE_CONTINUOUS
means the hardware supports all rates in a specific interval.
Sample rates are only restricted by the capabilities of the
clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of
SNDRV_PCM_RATE_8000_384000.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I4811ca8ea63ed72da8cd06e9e8bbd5f450683165
Use SNDRV_PCM_RATE_CONTINUOUS to support continuous range
sample rate, which can support any rate in range.
e.g.
48048, 31000, 768000
SNDRV_PCM_RATE_CONTINUOUS
means the hardware supports all rates in a specific interval.
Sample rates are only restricted by the capabilities of the
clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of
SNDRV_PCM_RATE_8000_384000.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ieeea4f9ae414f2fa6475fa5f6559162e15c688c9
Use SNDRV_PCM_RATE_CONTINUOUS to support continuous range
sample rate, which can support any rate in range.
e.g.
48048, 31000, 768000
SNDRV_PCM_RATE_CONTINUOUS
means the hardware supports all rates in a specific interval.
Sample rates are only restricted by the capabilities of the
clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of
SNDRV_PCM_RATE_8000_384000.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Iac49752b7919bc74ddcc89b53d34a6a5a96ea134
Use SNDRV_PCM_RATE_CONTINUOUS to support continuous range
sample rate, which can support any rate in range.
e.g.
48048, 31000, 768000
SNDRV_PCM_RATE_CONTINUOUS
means the hardware supports all rates in a specific interval.
Sample rates are only restricted by the capabilities of the
clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of
SNDRV_PCM_RATE_8000_384000.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ibff0ad918599a18ef29782ff379095996627d7be
