except rk3368 and rk3328 lineflag1 number should be set before last
active line 1000us, other platform lineflag1 number should be
set at the last active line.
Change-Id: I4598ae79f437e180c4de261894f09b421b473572
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
It has proved the controller has a potention broken state with a DTO
interrupt comes while the data payload is missing, which was not covered
by current software state machine. Add a xfer timer to work around
this buggy behaviour introduced by broken design.
Change-Id: I5019c5ba0cdeb59adcdd3a5231a2000b448762bc
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
RK3328 hdmi phy introduces an irq to detect ESD status
of TMDS link. If irq is triggered, it is need to reset
pdata_en signal.
Change-Id: I6190d57d3b4f7c4f6791e1204cb9d8a99da988e2
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
For those sub modules that have shadow registers in core isp, if
CIF_ISP_CTRL_ISP_CFG_UPD_PERMANENT of isp ctrl is disabled, the
new parameters will not be updated to shadow registers automatically.
BUG=b:36227021
TEST=scarlet can preview, LSC data table can be switched.
Change-Id: I804ddfc45b3c2fca9a6f51627af4264a25075070
Signed-off-by: ZhongYiChong <zyc@rock-chips.com>
Change-Id: I801f49e5b9ff2ec30cfe2cf821904b61174226d5
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
LSC data table size is 17x17, but when configuring data to ISP,
should be aligned to 18x17. That means every last data of last
line should be filled with 0, and not filled with the data of
next line.
BUG=b:36227021
TEST=scarlet can preview.
Change-Id: I5e923529429a1c60efff3827e594f32db7112c1f
Signed-off-by: ZhongYiChong <zyc@rock-chips.com>
Change-Id: Ib7805802fe616635c524ce2b17812cde3012b81a
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
This sorts out the locks in isp_stats.c to fix the warning of
new work queued when workqueue is draining.
BUG=b:36227021
TEST=camera recording stress on Dru, check not wq timeout
Change-Id: I83597dd6764c7fea861e7e5a2ca4614e074c9821
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Change-Id: I5fdc9b1e9913aa1286d70e3342f63008d5b140a0
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
Fix the memleak of alloc_ctx which is allocated twice and
doesn't cleanup properly.
BUG=b:71686724
TEST=check the kmemleak scan result
Change-Id: I17d15bf69bcdb33bb2cf6d446316d268a0df1e96
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Change-Id: I9a7e821b2d08c008a6a5a463953281ddee2ba245
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
Split the Rockchip ISP MIPI DPHY as a standalone driver.
This fix the error of rockchip isp1 and mipi_dphy_sy when
building as modules, "multiple definition of `init_module'".
Since the
commit 4aa8d9814f21 ("CHROMIUM: media: rockchip/isp1: fixup for different media/v4l API")
merged, this patch also removes the BROKEN flag in
commit 58d5a7a7ca76 ("CHROMIUM: Mark Rockchip ISP1 driver as BROKEN")
BUG=b:36227021
TEST=make allmodconfig
Change-Id: I7016842bbc97820d260c3200d25cb10b62ba903d
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/851556
Reviewed-by: Ricky Liang <jcliang@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
VIDEO_ROCKCHIP_ISP_DPHY_SY part is not included
Change-Id: I8ec9c6af5491511ff88669dbbb302b60f3d43d11
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
If uboot used the kernel dtb, need to enable the recovery key.
Change-Id: I5cc4ad22cc143b4aec04f5e75a5bd9727b208978
Signed-off-by: David Wu <david.wu@rock-chips.com>
Under the following conditions, phy will be abnormally enabled.
1. HDMI is enabled in uboot.
2. disabled/bridge_is_on/phy.enabled/mc_clkdis were updated to
work when probe.
3. HDMI is disconnected.
4. drm_helper_probe_single_connector_modes update connector->status
to disconnected and power off phy by dw_hdmi_update_power. But the
polled type of HDMI is DRM_CONNECTOR_POLL_HPD, output_poll_execute
will not process this disconnection, and dw_hdmi_bridge_disable is
not called, hdmi->disabled is still false.
5. vop will be switch to Tv encoder, and dclk is 27MHz.
6. HDMI is connected.
7. dw_hdmi_update_power is called in dw_hdmi_irq, for hdmi->disabled
is false, then phy is powered up with parameter of 27MHz, and
bridge_is_on is set to on.
8. VOP switch to HDMI mode, set the new dclk rate.
9. dw_hdmi_bridge_enable is called, but the bridge_is_on is already on,
phy will not set again, still maintain the parameters that do not
conform to the new dclk rate.
This patch introduced an variable initialized to indicate hdmi is
initialized before probe, e.g. uboot. When power off hdmi, initialized
and disabled is updated.
Change-Id: I163967ac02e7f29ab586acbfd25d5a15679470c8
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
In current code, the connect detective event will be send before the
connect state of controller change. The event is sent when receive
the first setup packet and the connect state of controller is changed
when receive set address command. So if disconnect interrupt trigger
between the first setup packet and set address command, the disconnect
process will not be done, while the application state has been changed
and keep in connected. As a result, the UI may still show the USB connect
option event if the device has been disconnect from PC. This patch send
the connect uevent when get descriptor of configuration which follow
set address command to make sure the application state change after
controller.
Change-Id: Icf2124327db93687b4b644672edb0dbecc8f127a
Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
According to the hardware, the mac is not active, so
disable it's status.
Change-Id: I59d6f6232529de3945ce1c766bb7a3c325bdfa8e
Signed-off-by: David Wu <david.wu@rock-chips.com>
There are some progresses need the readable and writable, when the debian
rootfs brings up.
Change-Id: I0f3b4fab5d591e35f5aacb4901f4e7733e46c306
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
The property rockchip,phy_table is no longer used.
Change-Id: I11a84a0ffaf85d80c1a850abc666cea74f7f6e35
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
There are writable 32 bits for PMU_GPIO0's iomux, so add the
IOMUX_WRITABLE_32BIT to read iomux register at first, it would
not change others' bits.
Change-Id: I1fb27c60d5d26e5719b6911a78e7cdf144feba26
Signed-off-by: David Wu <david.wu@rock-chips.com>
This patch adds support for clk tx/rx common mode.
rockchip,clk-trcm: tx and rx lrck/bclk common use.
- 0: both tx_lrck/bclk and rx_lrck/bclk are used
- 1: only tx_lrck/bclk is used
- 2: only rx_lrck/bclk is used
Change-Id: I7342ed25b0573bfc0ce0785838d5ee192ca6300d
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (395 commits)
Linux 4.4.126
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
net: fec: Fix unbalanced PM runtime calls
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
s390/qeth: free netdevice when removing a card
team: Fix double free in error path
skbuff: Fix not waking applications when errors are enqueued
net: Only honor ifindex in IP_PKTINFO if non-0
netlink: avoid a double skb free in genlmsg_mcast()
net/iucv: Free memory obtained by kzalloc
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
l2tp: do not accept arbitrary sockets
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
dccp: check sk for closed state in dccp_sendmsg()
net: Fix hlist corruptions in inet_evict_bucket()
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
...
Conflicts:
include/linux/usb/quirks.h
Change-Id: I125065cef66846e4cdee799f4b34d07c309d353e
rk808->pins maybe NULL.
Fixes: ed38d26a33 ("pinctrl: support pinctrl driver for the RK817&RK809 PMIC")
Change-Id: Ia2c25f2717498c06d0707f17d27b0a85ee23f229
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
After switching color, hdmi output signal may be unstable.
If AVMUTE is cleared too early, tv will display err.
Change-Id: I595180bfe6e014de5231bcd75ee259d5702121e0
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
When vpu mmu fault happen we need to separate encoder and decoder.
And add register index to debug information.
Change-Id: Id98d2af464548972592bae1597c78f070d570b6b
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
