[ Upstream commit 4e52797d2e ]
Booting kexec kernel with "efi=old_map" in kernel command line hits
kernel panic as shown below.
BUG: unable to handle kernel paging request at ffff88007fe78070
IP: virt_efi_set_variable.part.7+0x63/0x1b0
PGD 7ea28067
PUD 7ea2b067
PMD 7ea2d067
PTE 0
[...]
Call Trace:
virt_efi_set_variable()
efi_delete_dummy_variable()
efi_enter_virtual_mode()
start_kernel()
x86_64_start_reservations()
x86_64_start_kernel()
start_cpu()
[ efi=old_map was never intended to work with kexec. The problem with
using efi=old_map is that the virtual addresses are assigned from the
memory region used by other kernel mappings; vmalloc() space.
Potentially there could be collisions when booting kexec if something
else is mapped at the virtual address we allocated for runtime service
regions in the initial boot - Matt Fleming ]
Since kexec was never intended to work with efi=old_map, disable
runtime services in kexec if booted with efi=old_map, so that we don't
panic.
Tested-by: Lee Chun-Yi <jlee@suse.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac1181c608 ]
Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.
Detected by CoverityScan, CID#1164835 ("Logically dead code")
Fixes: 204cc5c44f ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6dd80efd75 ]
Pausing queue without checking threshold is racy with txdone path.
Moreover we do not need pause queue on any error, but only if queue
is full - in case when we send RTS frame ( other cases of almost full
queue are already handled in rt2x00queue_write_tx_frame() ).
Patch fixes of theoretically possible problem of pausing empty
queue.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eaadb1caa9 ]
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622 ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2023b0524a ]
Currently the LCD display (TD035S) on the cm-x300 platform is broken and
remains blank.
The TD0245S specification requires that the chipselect is toggled
between commands sent to the panel. This was also the purpose of the
former patch of commit f64dcac0b1 ("backlight: tdo24m: ensure chip
select changes between transfers").
Unfortunately, the "cs_change" field of a SPI transfer is
misleading. Its true meaning is that for a SPI message holding multiple
transfers, the chip select is toggled between each transfer, but for the
last transfer it remains asserted.
In this driver, all the SPI messages contain exactly one transfer, which
means that each transfer is the last of its message, and as a
consequence the chip select is never toggled.
Actually, there was a second bug hidding the first one, hence the
problem was not seen until v4.6. This problem was fixed by commit
a52db659c7 ("spi: pxa2xx: Fix cs_change management") for PXA based
boards.
This fix makes the TD035S work again on a cm-x300 board. The same
applies to other PXA boards, ie. corgi and tosa.
Fixes: a52db659c7 ("spi: pxa2xx: Fix cs_change management")
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb350e0ad9 ]
In both elevator_switch_mq() and blk_mq_update_nr_hw_queues(), sched tags
can be allocated, and q->nr_hw_queue is used, and race is inevitable, for
example: blk_mq_init_sched() may trigger use-after-free on hctx, which is
freed in blk_mq_realloc_hw_ctxs() when nr_hw_queues is decreased.
This patch fixes the race be holding q->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db9a2c6f9b ]
CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.
Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node. Also ensure
CQ resizes use the correct allocator when extending a CQ.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 24e78079bf ]
Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.
Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".
However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.
Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org>
Reported-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b9faf5df0 ]
Currently, when loading the vfb module, the newly created fbdev
has a line_length of 0, and its video mode would be PSEUDOCOLOR
regardless of color depth. (The former could be worked around by
calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE
flag set.) This patch automatically sets the line_length correctly,
and the video mode is derived from the bit depth now as well.
Thanks to Geert Uytterhoeven for confirming the bug and helping me with
the patch.
Output of `fbset -i' before the patch:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 0 <-- note this
Accelerator : No
After:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 5464
Accelerator : No
Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy@national.shitposting.agency>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3522f867c1 ]
acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose
the wrong half on big-endian 64-bit systems. Fix this by changing its
type to "u32" and removing the cast, as all other code already uses u32
or sometimes even only u8.
Fixes: 1195a09816 (ACPI: Provide /sys/kernel/debug/ec/...)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebe2f87180 ]
The ACPI specification says OS shouldn't attempt to use GICC configuration
parameters if the flag ACPI_MADT_ENABLED is cleared. The ARM64-SMP code
skips the disabled GICC entries but not causing any issue. However the
current GICv3 driver probe bails out causing kernel panic() instead of
skipping the disabled GICC interfaces. This issue happens on systems
where redistributor regions are not in the always-on power domain and
one of GICC interface marked with ACPI_MADT_ENABLED=0.
This patch does the two things to fix the panic.
- Don't return an error in gic_acpi_match_gicc() for disabled GICC entry.
- No need to keep GICR region information for disabled GICC entry.
Observed kernel crash on QDF2400 platform GICC entry is disabled.
Kernel crash traces:
Kernel panic - not syncing: No interrupt controller found.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.5 #26
[<ffff000008087770>] dump_backtrace+0x0/0x218
[<ffff0000080879dc>] show_stack+0x14/0x20
[<ffff00000883b078>] dump_stack+0x98/0xb8
[<ffff0000080c5c14>] panic+0x118/0x26c
[<ffff000008b62348>] init_IRQ+0x24/0x2c
[<ffff000008b609fc>] start_kernel+0x230/0x394
[<ffff000008b601e4>] __primary_switched+0x64/0x6c
---[ end Kernel panic - not syncing: No interrupt controller found.
Disabled GICC subtable example:
Subtable Type : 0B [Generic Interrupt Controller]
Length : 50
Reserved : 0000
CPU Interface Number : 0000003D
Processor UID : 0000003D
Flags (decoded below) : 00000000
Processor Enabled : 0
Performance Interrupt Trig Mode : 0
Virtual GIC Interrupt Trig Mode : 0
Parking Protocol Version : 00000000
Performance Interrupt : 00000017
Parked Address : 0000000000000000
Base Address : 0000000000000000
Virtual GIC Base Address : 0000000000000000
Hypervisor GIC Base Address : 0000000000000000
Virtual GIC Interrupt : 00000019
Redistributor Base Address : 0000FFFF88F40000
ARM MPIDR : 000000000000000D
Efficiency Class : 00
Reserved : 000000
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f49d4aed13 ]
1. In IO path, setting of "ATA command pending" flag early before device
removal, invalid device handle etc., checks causes any new commands
to be always returned with SAM_STAT_BUSY and when the driver removes
the drive the SML issues SYNC Cache command and that command is
always returned with SAM_STAT_BUSY and thus making SYNC Cache command
to requeued.
2. If the driver gets an ATA PT command for a SATA drive then the driver
set "ATA command pending" flag in device specific data structure not
to allow any further commands until the ATA PT command is completed.
However, after setting the flag if the driver decides to return the
command back to upper layers without actually issuing to the firmware
(i.e., returns from qcmd failure return paths) then the corresponding
flag is not cleared and this prevents the driver from sending any new
commands to the drive.
This patch fixes above two issues by setting of "ATA command pending"
flag after checking for whether device deleted, invalid device handle,
device busy with task management. And by setting "ATA command pending"
flag to false in all of the qcmd failure return paths after setting the
flag.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d754941225 ]
If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.
PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
#0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
#1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
#2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
#3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
#4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
#5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
#6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
#7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
#8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
#9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c
This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.
Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.
Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.
After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b70b309950 ]
Various Cherry Trail boards with a rt5645 codec have an analog mic
connected to IN2P + IN2N. The mic on this boards also needs micbias to
be enabled, on some boards micbias1 is used and on others micbias2, so
we enable both.
This commit adds a new "Int Analog Mic" DAPM widget for this, so that we
do not end up enabling micbias on boards with a digital mic which uses
the already present "Int Mic" widget. Some existing UCM files already
refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice,
but these don't work anyways since they enable the RECMIX BST1 Switch
instead of the BST2 switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d389b1251 ]
Calibration register is used for calculating current register in
hardware according to datasheet:
current = shunt_volt * calib_register / 2048 (ina 226)
current = shunt_volt * calib_register / 4096 (ina 219)
Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in
order to avoid truncation error and provide best precision allowed
by shunt_voltage measurement. Make current scale value follow changes
of shunt_resistor from sysfs as calib_register value is now fixed.
Power_lsb value should also follow shunt_resistor changes as stated in
datasheet:
power_lsb = 25 * current_lsb (ina 226)
power_lsb = 20 * current_lsb (ina 219)
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63f1e05f7f ]
df->governor is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.
Notice that df->governor is being null checked at line 1004:
if (df->governor) {, which implies it might be null.
Fix this by null checking df->governor before dereferencing it.
Addresses-Coverity-ID: 1401988 ("Dereference before null check")
Fixes: bcf23c79c4 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61647823aa ]
d_move() will call __d_drop() and then __d_rehash()
on the dentry being moved. This creates a small window
when the dentry appears to be unhashed. Many tests
of d_unhashed() are made under ->d_lock and so are safe
from racing with this window, but some aren't.
In particular, getcwd() calls d_unlinked() (which calls
d_unhashed()) without d_lock protection, so it can race.
This races has been seen in practice with lustre, which uses d_move() as
part of name lookup. See:
https://jira.hpdd.intel.com/browse/LU-9735
It could race with a regular rename(), and result in ENOENT instead
of either the 'before' or 'after' name.
The race can be demonstrated with a simple program which
has two threads, one renaming a directory back and forth
while another calls getcwd() within that directory: it should never
fail, but does. See:
https://patchwork.kernel.org/patch/9455345/
We could fix this race by taking d_lock and rechecking when
d_unhashed() reports true. Alternately when can remove the window,
which is the approach this patch takes.
___d_drop() is introduce which does *not* clear d_hash.pprev
so the dentry still appears to be hashed. __d_drop() calls
___d_drop(), then clears d_hash.pprev.
__d_move() now uses ___d_drop() and only clears d_hash.pprev
when not rehashing.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a42b63c1ac ]
Change the default mapping between TC and TCG as follows:
Prio | TC/TCG
| from to
| (set by FW) (set by SW)
---------+-----------------------------------
0 | 0/0 0/7
1 | 1/0 0/6
2 | 2/0 0/5
3 | 3/0 0/4
4 | 4/0 0/3
5 | 5/0 0/2
6 | 6/0 0/1
7 | 7/0 0/0
These new settings cause that a pause frame for any prio stops
traffic for all prios.
Fixes: 564c274c3d ("net/mlx4_en: DCB QoS support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5928c28152 ]
We're seeing a lot of bogus backlight interfaces on newer machines without
a LCD such as desktops, servers and HDMI sticks. This causes userspace to
show a non-functional brightness slider in e.g. the GNOME3 system menu,
which is undesirable. And, in general, we should simply just not register
a non functional backlight interface.
Checking the LCD flag causes the bogus acpi_video backlight interfaces to
go away (on the machines this was tested on).
This change sets the lcd_only option by default on any machines which
are Win8-ready, to fix this.
This is not entirely without a risk of regressions, but video_detect.c
already prefers native-backlight interfaces over the acpi_video one
on Win8-ready machines, calling acpi_video_unregister_backlight() as soon
as a native interface shows up. This is done because the ACPI backlight
interface often is broken on Win8-ready machines, because win8 does not
seem to actually use it.
So in practice we already end up not registering the ACPI backlight
interface on (most) Win8-ready machines with a LCD panel, thus this
change does not change anything for (most) machines with a LCD panel
and on machines without a LCD panel we actually don't want to register
any backlight interfaces.
This has been tested on the following machines and fixes a bogus backlight
interface showing up there:
- Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx
- Intel Compute Stick STK1AW32SC
- Meegopad T08 HDMI stick
Bogus backlight interfaces have also been reported on:
- Desktop with Asus H87I-Plus m.b.
- Desktop with ASRock B75M-ITX m.b.
- Desktop with Gigabyte Z87-D3HP m.b.
- Dell PowerEdge T20 desktop
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ae0c649c4 ]
If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.
rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.
WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \
rds_sock_destruct+0x15/0x30 [rds]
:
__sk_destruct+0x21/0x190
rds_remove_bound.part.13+0xb6/0x140 [rds]
rds_release+0x71/0x120 [rds]
sock_release+0x1a/0x70
sock_close+0xe/0x20
__fput+0xd5/0x210
task_work_run+0x82/0xa0
do_exit+0x2ce/0xb30
? syscall_trace_enter+0x1cc/0x2b0
do_group_exit+0x39/0xa0
SyS_exit_group+0x10/0x10
do_syscall_64+0x61/0x1a0
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d5c7b4d5ac ]
Commit a22950c888 (mmc: sdhci-of-esdhc: add quirk
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to
enable the broken timeout val quirk for ls1021a, but did not add the
corresponding compatible string to the device tree, so it didn't really
have any effect. Fix that.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fe99afd1fe ]
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df8b13a1b2 ]
Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.
Fixes: 786c6adb3a ("i40iw: add puda code")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90dd57de4a ]
Amongst its other duties, msm_gem_new_impl adds the newly created
GEM object to the shared inactive list which may also be actively
modifiying the list during submission. All the paths to modify
the list are protected by the mutex except for the one through
msm_gem_import which can end up causing list corruption.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0908cf4dfe ]
There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.
If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).
The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.
So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1d39b17e0 ]
The decision whether or not to exit from L2 to L1 on an lmsw instruction is
based on bogus values: instead of using the information encoded within the
exit qualification, it uses the data also used for the mov-to-cr
instruction, which boils down to using whatever is in %eax at that point.
Use the correct values instead.
Without this fix, an L1 may not get notified when a 32-bit Linux L2
switches its secondary CPUs to protected mode; the L1 is only notified on
the next modification of CR0. This short time window poses a problem, when
there is some other reason to exit to L1 in between. Then, L2 will be
resumed in real mode and chaos ensues.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83b4605b0c ]
We need to return an error for any call that asks for MSI / MSI-X
vectors only, so that non-trivial fallback logic can work properly.
Also valid dev->irq and use the "correct" errno value based on feedback
from Linus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49dfe2a677 ]
The CPU hotplug callbacks are not covered by lockdep versus the cpu hotplug
rwsem.
CPU0 CPU1
cpuhp_setup_state(STATE, startup, teardown);
cpus_read_lock();
invoke_callback_on_ap();
kick_hotplug_thread(ap);
wait_for_completion(); hotplug_thread_fn()
lock(m);
do_stuff();
unlock(m);
Lockdep does not know about this dependency and will not trigger on the
following code sequence:
lock(m);
cpus_read_lock();
Add a lockdep map and connect the initiators lock chain with the hotplug
thread lock chain, so potential deadlocks can be detected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081549.709375845@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 797a93647a ]
In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.
However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.
This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.
NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.
Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b3c7dbbff ]
Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c3f1875c6 ]
The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.
This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request. Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.
Before ef547f2ac1 (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.
Signed-off-by: Roman Kapl <roman.kapl@sysgo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0e1a1b5a8 ]
Paul Fiterau Brostean reported :
<quote>
Linux TCP stack we analyze exhibits behavior that seems odd to me.
The scenario is as follows (all packets have empty payloads, no window
scaling, rcv/snd window size should not be a factor):
TEST HARNESS (CLIENT) LINUX SERVER
1. - LISTEN (server listen,
then accepts)
2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED
3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED
4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED
5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server
opts to close the data connection calling "close" on the connection
socket)
6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends
FIN,ACK with not yet sent acknowledgement number)
7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102
instead of 101, why?)
... (silence from CLIENT)
8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING
(retransmission, again ACK is 102)
Now, note that packet 6 while having the expected sequence number,
acknowledges something that wasn't sent by the server. So I would
expect
the packet to maybe prompt an ACK response from the server, and then be
ignored. Yet it is not ignored and actually leads to an increase of the
acknowledgement number in the server's retransmission of the FIN,ACK
packet. The explanation I found is that the FIN in packet 6 was
processed, despite the acknowledgement number being unacceptable.
Further experiments indeed show that the server processes this FIN,
transitioning to CLOSING, then on receiving an ACK for the FIN it had
send in packet 5, the server (or better said connection) transitions
from CLOSING to TIME_WAIT (as signaled by netstat).
</quote>
Indeed, tcp_rcv_state_process() calls tcp_ack() but
does not exploit the @acceptable status but for TCP_SYN_RECV
state.
What we want here is to send a challenge ACK, if not in TCP_SYN_RECV
state. TCP_FIN_WAIT1 state is not the only state we should fix.
Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process()
can choose to send a challenge ACK and discard the packet instead
of wrongly change socket state.
With help from Neal Cardwell.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Fiterau Brostean <p.fiterau-brostean@science.ru.nl>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 717902cc93 ]
Commit 093d24a204 ("arm64: PCI: Manage controller-specific data on
per-controller basis") added code to allocate ACPI PCI root_ops
dynamically on a per host bridge basis but failed to update the
corresponding memory allocation failure path in pci_acpi_scan_root()
leading to a potential memory leakage.
Fix it by adding the required kfree call.
Fixes: 093d24a204 ("arm64: PCI: Manage controller-specific data on per-controller basis")
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Timmy Li <lixiaoping3@huawei.com>
[lorenzo.pieralisi@arm.com: refactored code, rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 624327f879 ]
ext4_find_unwritten_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.
When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size ext4 on x86_64 host.
# xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
-c "seek -d 0" /mnt/ext4/testfile
wrote 1024/1024 bytes at offset 2048
1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec)
Whence Result
DATA EOF
Data at offset 2k was missed, and lseek(2) returned ENXIO.
This is unconvered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9dfa7bba35 ]
get_reg() can be reentered on architectures with prioritized interrupts
(m68k in this case), causing f->reg_index to be incremented after the
range check. Out of bounds memory access past the pt_regs struct results.
This will go mostly undetected unless access is beyond end of memory.
Prevent the race by disabling interrupts in get_reg().
Tested on m68k (Atari Falcon, and ARAnyM emulator).
Kudos to Geert Uytterhoeven for helping to trace this race.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2dd893a3b ]
If multiple tasks attempt to read the stats, it may happen that the
start_req_done completion is re-initialized while still being used by
another task, causing a list corruption.
This patch fixes the bug by adding a mutex to serialize the calls to
bnx2fc_get_host_stats().
WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted)
Hardware name: PowerEdge R820
list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588
Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1
Call Trace:
[<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0
[<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60
[<ffffffff812ad16e>] ? list_del+0x6e/0xa0
[<ffffffff81547eed>] ? wait_for_common+0x14d/0x180
[<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20
[<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20
[<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc]
[<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc]
[<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc]
[<ffffffff8137c647>] ? dev_attr_show+0x27/0x50
[<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50
[<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200
[<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0
[<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50
[<ffffffff8119a651>] ? sys_read+0x51/0xb0
[<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290
[<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 662f9a105b ]
If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The
caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime,
but obviously we intended to set an error code here.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fefa92679d ]
If nf_conntrack_htable_size was adjusted by the user during the ct
dump operation, we may invoke nf_ct_put twice for the same ct, i.e.
the "last" ct. This will cause the ct will be freed but still linked
in hash buckets.
It's very easy to reproduce the problem by the following commands:
# while : ; do
echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets
done
# while : ; do
conntrack -L
done
# iperf -s 127.0.0.1 &
# iperf -c 127.0.0.1 -P 60 -t 36000
After a while, the system will hang like this:
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184]
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382]
...
So at last if we find cb->args[1] is equal to "last", this means hash
resize happened, then we can set cb->args[1] to 0 to fix the above
issue.
Fixes: d205dc4079 ("[NETFILTER]: ctnetlink: fix deadlock in table dumping")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1982ad48fc ]
As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.
This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:
~~~~~~~~~~~~~~~
#include <thread>
#include <chrono>
using namespace std;
int main()
{
this_thread::sleep_for(chrono::milliseconds(1000));
this_thread::sleep_for(chrono::milliseconds(100));
this_thread::sleep_for(chrono::milliseconds(10));
return 0;
}
~~~~~~~~~~~~~~~
Now compile and record it:
~~~~~~~~~~~~~~~
g++ -std=c++11 -g -O2 test.cpp
echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
perf record \
--event sched:sched_stat_sleep \
--event sched:sched_process_exit \
--event sched:sched_switch --call-graph=dwarf \
--output perf.data.raw \
./a.out
echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~
Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:9
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:10
| __libc_start_main
| _start
|
--0.91%--main test.cpp:13
__libc_start_main
_start
~~~~~~~~~~~~~~~
With this patch here applied, the issue is fixed. The report becomes
much more usable:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:8
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:9
| __libc_start_main
| _start
|
--0.91%--main test.cpp:10
__libc_start_main
_start
~~~~~~~~~~~~~~~
Similarly it works for signal frames:
~~~~~~~~~~~~~~~
__noinline void bar(void)
{
volatile long cnt = 0;
for (cnt = 0; cnt < 100000000; cnt++);
}
__noinline void foo(void)
{
bar();
}
void sig_handler(int sig)
{
foo();
}
int main(void)
{
signal(SIGUSR1, sig_handler);
raise(SIGUSR1);
foo();
return 0;
}
~~~~~~~~~~~~~~~~
Before, the report wrongly points to `signal.c:29` after raise():
~~~~~~~~~~~~~~~~
$ perf report --stdio --no-children -g srcline -s srcline
...
100.00% signal.c:11
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:29
__libc_start_main
_start
~~~~~~~~~~~~~~~~
With this patch in, the issue is fixed and we instead get:
~~~~~~~~~~~~~~~~
100.00% signal signal [.] bar
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:27
__libc_start_main
_start
~~~~~~~~~~~~~~~~
Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 293dffaad8 ]
If there is not enough space then ceph_decode_32_safe() does a goto bad.
We need to return an error code in that situation. The current code
returns ERR_PTR(0) which is NULL. The callers are not expecting that
and it results in a NULL dereference.
Fixes: f24e9980eb ("ceph: OSD client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
