commit 9c65001c57164033ad08b654c8b5ae35512ddf4a upstream.
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com>
Fixes: c44c5eeb2c ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908e4ead7f757504d8b345452730636e298cbf68 upstream.
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/
Fixes: d20c11d86d ("nfsd: Protect session creation and client confirm using client_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 41b70df5b38bc80967d2e0ed55cc3c3896bba781 upstream.
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used.
Cc: stable@vger.kernel.org
Reported-by: pt x <superman.xpt@gmail.com>
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4faff70959d51078f9ee8372f8cff0d7045e4114 upstream.
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e05c54974a05ab19658433545d6ced88d9075cf0 upstream.
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Cc: stable@vger.kernel.org # 6.6
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49db61c27c4bbd24364086dc0892bd3e14c1502e upstream.
Commit 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
Fixes: 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Larysch <fl@n621.de>
Link: https://patch.msgid.link/20250723222250.13960-1-fl@n621.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 759dfc7d04bab1b0b86113f1164dc1fec192b859 upstream.
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
netlink_attachskb net/netlink/af_netlink.c:1234
netlink_unicast net/netlink/af_netlink.c:1349
kauditd_send_queue kernel/audit.c:776
kauditd_thread kernel/audit.c:897
kthread kernel/kthread.c:328
ret_from_fork arch/x86/entry/entry_64.S:304
Restore the original behavior of the check which commit in Fixes
accidentally missed when restructuring the code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250728080727.255138-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e19d8dd694d261ac26adb2a26121a37c107c81ad upstream.
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecfd41166b72b67d3bdeb88d224ff445f6163869 upstream.
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef532 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 151c0aa896c47a4459e07fee7d4843f44c1bb18e upstream.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35ad7e181541aa5757f9f316768d3e64403ec843 upstream.
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cec9ac2d071cfd2da562241aab0ef701355762a upstream.
Right now, if XRSTOR fails a console message like this is be printed:
Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers.
However, the text location (...+0x9a in this case) is the instruction
*AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump
also points one instruction late.
The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and
keep on running after returning from the #GP handler. But it does this
fixup before warning.
The resulting warning output is nonsensical because it looks like the
non-FPU-related instruction is #GP'ing.
Do not fix up RIP until after printing the warning. Do this by using
the more generic and standard ex_handler_default().
Fixes: d5c8028b47 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Acked-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a15ca0ca51399b652b1bbb23b590b220cf03d62 upstream.
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e162b
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Closes: https://github.com/geoffreybennett/linux-fcp/issues/41
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cbe564974248ee980562be02f2b1912769562c7 upstream.
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d6 ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7b306dfa326f70114312b320d083b21fa9481e1e upstream.
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f upstream.
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9beb8c5e77dc10e3889ff5f967eeffba78617a88 upstream.
Commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to resolve the issue.
This patch removes the warning from __thaw_task. A subsequent patch will
revert commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to complete the fix.
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23ab79e8e469e2605beec2e3ccb40d19c68dd2e0 upstream.
It is possible for a task to be thawed multiple times when mixing the
*legacy* cgroup freezer and system-wide freezer. To do this, freeze the
cgroup, do system-wide freeze/thaw, then thaw the cgroup. When this
happens, then a stale saved_state can be written to the task's state
and cause task to hang indefinitely. Fix this by only trying to thaw
tasks that are actually frozen.
This change also has the marginal benefit avoiding unnecessary
wake_up_state(p, TASK_FROZEN) if we know the task is already thawed.
There is not possibility of time-of-compare/time-of-use race when we skip
the wake_up_state because entering/exiting TASK_FROZEN is guarded by
freezer_lock.
Fixes: 8f0eed4a78a8 ("freezer,sched: Use saved_state to reduce some spurious wakeups")
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abhijeet Dharmapurikar <quic_adharmap@quicinc.com>
Link: https://lore.kernel.org/r/20231120-freezer-state-multiple-thaws-v1-1-f2e1dd7ce5a2@quicinc.com
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f0eed4a78a81668bc78923ea09f51a7a663c2b0 upstream.
After commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic"),
tasks that transition directly from TASK_FREEZABLE to TASK_FROZEN are
always woken up on the thaw path. Prior to that commit, tasks could ask
freezer to consider them "frozen enough" via freezer_do_not_count(). The
commit replaced freezer_do_not_count() with a TASK_FREEZABLE state which
allows freezer to immediately mark the task as TASK_FROZEN without
waking up the task. This is efficient for the suspend path, but on the
thaw path, the task is always woken up even if the task didn't need to
wake up and goes back to its TASK_(UN)INTERRUPTIBLE state. Although
these tasks are capable of handling of the wakeup, we can observe a
power/perf impact from the extra wakeup.
We observed on Android many tasks wait in the TASK_FREEZABLE state
(particularly due to many of them being binder clients). We observed
nearly 4x the number of tasks and a corresponding linear increase in
latency and power consumption when thawing the system. The latency
increased from ~15ms to ~50ms.
Avoid the spurious wakeups by saving the state of TASK_FREEZABLE tasks.
If the task was running before entering TASK_FROZEN state
(__refrigerator()) or if the task received a wake up for the saved
state, then the task is woken on thaw. saved_state from PREEMPT_RT locks
can be re-used because freezer would not stomp on the rtlock wait flow:
TASK_RTLOCK_WAIT isn't considered freezable.
Reported-by: Prakash Viswalingam <quic_prakashv@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbaa6a181a4b1886cbf4214abdf9a2df68471510 upstream.
In preparation for freezer to also use saved_state, remove the
CONFIG_PREEMPT_RT compilation guard around saved_state.
On the arm64 platform I tested which did not have CONFIG_PREEMPT_RT,
there was no statistically significant deviation by applying this patch.
Test methodology:
perf bench sched message -g 40 -l 40
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 ]
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde5 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e6103cd45ef0e14eb02f0666bc6b494902cfe821 ]
The irq handling is currently split between the irq handler
and the threaded irq handler. Some of the handling (such as
dma related stuffs) done within the irq handler might sleep or
take some time leading to issues if the kernel is built with
realtime constraints. In order to fix that, perform an overall
rework to perform most of the job within the threaded handler
and only keep fifo access in the non threaded handler.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 6aae87fe7f18 ("i2c: stm32f7: unmap DMA mapped buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e7d178d06e8937454b6d2f2811fa6a15656a214 upstream.
In ksmbd_extract_shortname(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in "__" being copied
to 'extension' rather than "___" (two underscores instead of three).
Use the destination buffer size instead to ensure that the string "___"
(three underscores) is copied correctly.
Cc: stable@vger.kernel.org
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6bb9193974059ddbb0ce7763fa3882bd60d4dc3 upstream.
Repeated connections from clients with the same IP address may exhaust
the max connections and prevent other normal client connections.
This patch limit repeated connections from clients with the same IP.
Reported-by: tianshuo han <hantianshuo233@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f8ff9486fd94b9d6a4932f2aefb9f2fc3bd0cf6 upstream.
If STATX_BASIC_STATS flags are not given as an argument to vfs_getattr,
It can not get ctime and mtime in kstat.
This causes a problem showing mtime and ctime outdated from cifs.ko.
File: /xfstest.test/foo
Size: 4096 Blocks: 8 IO Block: 1048576 regular file
Device: 0,65 Inode: 2033391 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Context: system_u:object_r:cifs_t:s0
Access: 2025-07-23 22:15:30.136051900 +0100
Modify: 1970-01-01 01:00:00.000000000 +0100
Change: 1970-01-01 01:00:00.000000000 +0100
Birth: 2025-07-23 22:15:30.136051900 +0100
Cc: stable@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44a3059c4c8cc635a1fb2afd692d0730ca1ba4b6 upstream.
If client send multiple session setup requests to ksmbd,
Preauh_HashValue race condition could happen.
There is no need to free sess->Preauh_HashValue at session setup phase.
It can be freed together with session at connection termination phase.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27661
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b493ab6f35178afd8d619800df9071992f715de upstream.
If client send two session setups with krb5 authenticate to ksmbd,
null pointer dereference error in generate_encryptionkey could happen.
sess->Preauth_HashValue is set to NULL if session is valid.
So this patch skip generate encryption key if session is valid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27654
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
