Add mailbox and scpi protocol function support for rk3368 SoC.
Change-Id: I201c916865eb2729ed135c3f5a77a9dd97007952
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
The JPEG decoder is also able to output the raw image in
NV12 format without the help of Post Processor of decoder
in VDPU1.
Change-Id: I1b29a5d93d2dd8ae2f21a7537cc3493adf57d022
Signed-off-by: Randy Li <randy.li@rock-chips.com>
The rk3328 saradc is the same as rk3399, so change the compitiable,
they are both 6 channels.
Change-Id: Ia6104e8c5c3590cc745792b8cd3a457a15bb53d2
Signed-off-by: David Wu <david.wu@rock-chips.com>
The RK3328 datasheet is not define the pins of gmac m0,
so remove them.
Change-Id: Ic537586c76bd2f3a937c1e15b5877744598cc702
Signed-off-by: David Wu <david.wu@rock-chips.com>
Add gpio pin index definition to make it easier to describe
GPIO in dts.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I4aa6c01f96d91fd8ddcb371fd01ca9629f1a3013
bcmdhd driver support ko module or compile into kernel
Change-Id: I260c9d3c3da0a9e249a4ee3883ed3efe03964ddf
Signed-off-by: Xu Xuehui <xxh@rock-chips.com>
If there's a panel connected to the analogix_dp bridge, rely on
the panel driver for modes, rather than reading EDID *and* calling
get_modes() on the panel.
This allows panels with a valid EDID to read it in the panel driver
(e.g. simple_panel), and panels with invalid EDID to homebrew modes
in their get_modes implementation.
BUG=chrome-os-partner:53565
TEST=Boot device and confirm the modes returned are from panel driver
instead of EDID
[from https://patchwork.freedesktop.org/patch/107115/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374959
Commit-Ready: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Change-Id: Ie07dd33e3c121215bf24394cfcb3fff8c7c746a5
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
It's required by gpu driver, which will load firmware through
/system/vendor/firmware.
If android finds another way to fix it, then can be reverted.
Change-Id: I2fede28f022f10c2e16f68b21159a638a10a53ec
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
this patch register hdmi and dp as one sound card, and compatible
single hdmi audio, single dp audio or both.
Change-Id: I840e6c13f1a0c765a3a9235eb0a798011fc3bf06
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
this patch is used for rockchip built-in HDMI and DP audio output which are
wired to the same i2s line. so we use a DAI link CPU to multicodecs.
Change-Id: Ie8d1ede201a4d4b4cd11c8c05cd1f6177d844957
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
snd_soc_get_dai_name() is used from snd_soc_of_get_dai_name(),
and it is assuming that DT is using "sound-dai" / "#sound-dai-cells".
But graph base DT is using "remote-endpoint". This patch makes
snd_soc_get_dai_name() non static for graph support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit 1ad8ec535b)
Change-Id: If99dcbfa722f09e3238cfafb5dc2803b6636a2e0
This adds move some common properties of usb-otg from dts to dtsi.
Change-Id: I84355433b5ca63cc0b763d66dcdbb38897635418
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Using the builtin I2C controller in dw_hdmi is better than using the
normal RK3288 I2C controller(I2C5).
Test: work normally when switch mode between 4K@60hz|4K@30hz|1080P..
Change-Id: Ifb4b72ca5649efb0cc3055f2db34ebbcc2377c4c
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Using the builtin I2C controller in dw_hdmi is better than using the
normal RK3399 I2C controller(I2C3).
Change-Id: I6a2de7221263e8564f7cca56ea5c52e1a133c138
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.
This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks"
With this patch,dw-hdmi can read EDID data with 1/2/4 blocks.
(am from https://patchwork.kernel.org/patch/9586343/)
BUG=chrome-os-partner:59768
TEST=fievel can read 1/2/4 blocks EDID data
Change-Id: I086e6ea63ec69c0532be445b958ce253a7f1f3cc
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/442308
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Use pwm_get/set_xxx() helpers instead of directly accessing the pwm->xxx
field. Doing that will ease adaptation of the PWM framework to support
atomic update.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit 4b58896f72)
Change-Id: Ic6bdaf2017bb292ef920604fba86805999cebf0c
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
We're going to need to amend this table in board files.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 647cea2e68)
Change-Id: Ife7affa44554622b1b35ad6756cef78d22c69a3a
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
This patch fix the following warning:
drivers/pwm/pwm-rockchip.c:176:6: warning: unused variable 'ret' [-Wunused-variable]
Change-Id: I9ac08ad08fdefee5b875d36592936b07f032586c
Signed-off-by: David Wu <david.wu@rock-chips.com>
support wifi driver work as ko module or compile into kernel
1. wifi driver work as ko module, configs show as below:
CONFIG_WIFI_LOAD_DRIVER_WHEN_KERNEL_BOOTUP=n
CONFIG_RTL8188EU = m and CONFIG_RTL8188FU = m
2. wifi driver compile into kernel, configs show as below:
ps: Only one Realtek driver can be compiled into the kernel
CONFIG_WIFI_LOAD_DRIVER_WHEN_KERNEL_BOOTUP=y
CONFIG_RTL8188EU = y or CONFIG_RTL8188FU = y
Change-Id: I40e33a6f27597f9f90d9987d189b74fb637c40c1
Signed-off-by: Xu Xuehui <xxh@rock-chips.com>
On yuv domain, background need use 10bit yuv format.
Change-Id: I02fe3894ac12b509e22c0d90977bcb7e4535c16d
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
VOP output mode and bus_format must be ROCKCHIP_OUT_MODE_YUV420
and MEDIA_BUS_FMT_YUV8_1X24 when display mode has a YCbCr420
flag.
Change-Id: Ib2d51c119f5a8f1b8a9285c47ab228b22a293d56
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Since bits[19:22] have been used for picture aspect ratio
in upstream patch 876f43c073.
We define YCbCr420 flag to the subsequent bits.
Change-Id: I2eff8b51227fc7beb4f587e90bc070ae865ba9d4
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
