In case of buggy firmware, brcmfmac may perform a hardware reset. If during
reset and subsequent probing an early failure occurs, a memory region is
accidentally double-freed. With hardened memory allocation enabled, this error
will be detected.
- return early where appropriate to skip unnecessary clean-up.
- set '.freezer' pointer to NULL to prevent double-freeing under possible
other circumstances and to re-align result under various different
behaviors of memory allocation freeing.
- correctly claim host on func1 for disabling func2.
- after reset, do not initiate probing immediately, but rely on events.
Given a firmware crash, function 'brcmf_sdio_bus_reset' is called. It calls
'brcmf_sdiod_remove', then follows up with 'brcmf_sdiod_probe' to reinitialize
the hardware. If 'brcmf_sdiod_probe' fails to "set F1 blocksize", it exits
early, which includes calling 'brcmf_sdiod_remove'. In both cases
'brcmf_sdiod_freezer_detach' is called to free allocated '.freezer', which
has not yet been re-allocated the second time.
Stacktrace of (failing) hardware reset after firmware-crash:
Code: b9402b82 8b0202c0 eb1a02df 54000041 (d4210000)
ret_from_fork+0x10/0x20
kthread+0x154/0x160
worker_thread+0x188/0x504
process_one_work+0x1f4/0x490
brcmf_core_bus_reset+0x34/0x44 [brcmfmac]
brcmf_sdio_bus_reset+0x68/0xc0 [brcmfmac]
brcmf_sdiod_probe+0x170/0x21c [brcmfmac]
brcmf_sdiod_remove+0x48/0xc0 [brcmfmac]
kfree+0x210/0x220
__slab_free+0x58/0x40c
Call trace:
x2 : 0000000000000040 x1 : fffffc00002d2b80 x0 : ffff00000b4aee40
x5 : ffff8000013fa728 x4 : 0000000000000001 x3 : ffff00000b4aee00
x8 : ffff800009967ce0 x7 : ffff8000099bfce0 x6 : 00000006f8005d01
x11: ffff8000099bfce0 x10: 00000000fffff000 x9 : ffff8000083401d0
x14: 0000000000000000 x13: 657a69736b636f6c x12: 6220314620746573
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030
x20: fffffc00002d2ba0 x19: fffffc00002d2b80 x18: 0000000000000000
x23: ffff00000b4aee00 x22: ffff00000b4aee00 x21: 0000000000000001
x26: ffff00000b4aee00 x25: ffff0000f7753705 x24: 000000000001288a
x29: ffff80000a22bbf0 x28: ffff000000401200 x27: 000000008020001a
sp : ffff80000a22bbf0
lr : kfree+0x210/0x220
pc : __slab_free+0x58/0x40c
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Workqueue: events brcmf_core_bus_reset [brcmfmac]
Hardware name: Pine64 Pinebook Pro (DT)
CPU: 2 PID: 639 Comm: kworker/2:2 Tainted: G C 5.16.0-0.bpo.4-arm64 #1 Debian 5.16.12-1~bpo11+1
nvmem_rockchip_efuse industrialio_triggered_buffer videodev snd_soc_core snd_pcm_dmaengine kfifo_buf snd_pcm io_domain mc industrialio mt>
Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reje>
Internal error: Oops - BUG: 0 [#1] SMP
kernel BUG at mm/slub.c:379!
Signed-off-by: Danny van Heumen <danny@dannyvanheumen.nl>
Reviewed-by: Arend van Spriel <aspriel.gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/id1HN6qCMAirApBzTA6fT7ZFWBBGCJhULpflxQ7NT6cgCboVnn3RHpiOFjA9SbRqzBRFLk9ES0C4FNvO6fUQsNg7pqF6ZSNAYUo99nHy8PY=@dannyvanheumen.nl
Commit a21bf90e92 ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") introduced a fallback mechanism whereby a
trivial mapping from ISO3166 country codes to firmware country code and
revision is used on some devices. This fallback operates on the device
level, so it is enabled only for certain supported chipsets.
In general though, the firmware country codes are determined by the CLM
blob, which is board-specific and may vary despite the underlying
chipset being the same.
The aforementioned commit is actually a refinement of a previous commit
that was reverted in commit 151a7c12c4 ("Revert "brcmfmac: use ISO3166
country code and 0 rev as fallback"") due to regressions with a BCM4359
device. The refinement restricted the fallback mechanism to specific
chipsets such as the BCM4345.
We use a chipset - CYW88359 - that the driver identifies as a BCM4359
too. But in our case, the CLM blob uses ISO3166 country codes
internally, and all with revision 0. So the trivial mapping is exactly
what is needed in order for the driver to sync the kernel regulatory
domain to the firmware. This is just a matter of how the CLM blob was
prepared by the hardware vendor. The same could hold for other boards
too.
Although the brcm,ccode-map device tree property is useful for cases
where the mapping is more complex, the trivial case invites a much
simpler specification. This patch adds support for parsing the
brcm,ccode-map-trivial device tree property. Subordinate to the more
specific brcm,ccode-map property, this new proprety simply informs the
driver that the fallback method should be used in every case.
In the absence of the new property in the device tree, expect no
functional change.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711123005.3055300-3-alvin@pqrs.dk
The bindings already offer a brcm,ccode-map property to describe the
mapping between the kernel's ISO3166 alpha 2 country code string and the
firmware's country code string and revision number. This is a
board-specific property and determined by the CLM blob firmware provided
by the hardware vendor.
However, in some cases the firmware will also use ISO3166 country codes
internally, and the revision will always be zero. This implies a trivial
mapping: cc -> { cc, 0 }.
For such cases, add an optional property brcm,ccode-map-trivial which
obviates the need to describe every trivial country code mapping in the
device tree with the existing brcm,ccode-map property. The new property
is subordinate to the more explicit brcm,ccode-map property.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711123005.3055300-2-alvin@pqrs.dk
On some boards there is no eeprom to hold the nvram, in this case instead
a board specific nvram is loaded from /lib/firmware. On most boards the
macaddr=... setting in the /lib/firmware nvram file is ignored because
the wifi/bt chip has a unique MAC programmed into the chip itself.
But in some cases the actual MAC from the /lib/firmware nvram file gets
used, leading to MAC conflicts.
The MAC addresses in the troublesome nvram files seem to all come from
the same nvram file template, so we can detect this by checking for
the template nvram file MAC.
Detect that the default MAC address is being used and replace it
with a random MAC address to avoid MAC address conflicts.
Note that udev will detect this is a random MAC based on
/sys/class/net/wlan0/addr_assign_type and then replace this with
a MAC based on hashing the netdev-name + the machine-id. So that
the MAC address is both guaranteed to be unique per machine while
it is still the same/persistent at each boot (assuming the
default Link.MACAddressPolicy=persistent udev setting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-2-hdegoede@redhat.com
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.
Some other functions not directly called by the .suspend/.resume
callbacks, but still related to PM were also taken outside #ifdef
guards.
The advantage is then that these functions are now always compiled
independently of any Kconfig option, and thanks to that bugs and
regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220627193701.31074-1-paul@crapouillou.net
Tony Nguyen says:
====================
ice: PPPoE offload support
Marcin Szycik says:
Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.
Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields (will be submitted
soon).
ICE COMMS DDP package is required to create a filter in ice.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for PPPoE hardware offload
flow_offload: Introduce flow_match_pppoe
net/sched: flower: Add PPPoE filter
flow_dissector: Add PPPoE dissectors
====================
Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
====================
This series revolves around ethtool and timestamping. Its ultimate
goal is that the timestamping implementation within socketCAN meets
the specification of other network drivers in the kernel. This way,
tcpdump or other tools derived from libpcap can be used to do
timestamping on CAN devices.
* Example on a device with hardware timestamp support *
Before this series:
| # tcpdump -j adapter_unsynced -i can0
| tcpdump: WARNING: When trying to set timestamp type
| 'adapter_unsynced' on can0: That type of time stamp is not supported
| by that device
After applying this series, the warning disappears and tcpdump can be
used to get RX hardware timestamps.
This series is articulated in three major parts.
* Part 1: Add TX software timestamps and report the software
timestamping capabilities through ethtool.
All the drivers using can_put_echo_skb() already support TX software
timestamps. However, the five drivers not using this function (namely
can327, janz-ican3, slcan, vcan and vxcan) lack such support. Patch 1
to 4 adds this support. Finally, patch 5 advertises the timesamping
capabilities of all drivers which do not support hardware timestamps.
* Part 2: add TX hardware timestapms
This part is a single patch. In SocketCAN TX hardware is equal to the
RX hardware timestamps of the corresponding loopback frame. Reuse the
TX hardware timestamp to populate the RX hardware timestamp. While the
need of this feature can be debatable, we implement it here so that
generic timestamping tools which are agnostic of the specificity of
SocketCAN can still obtain the value. For example, tcpdump expects for
both TX and RX hardware timestamps to be supported in order to do:
| # tcpdump -j adapter_unsynced -i canX
* Part 3: report the hardware timestamping capabilities and implement
the hardware timestamps ioctls.
The kernel documentation specifies in [1] that, for the drivers which
support hardware timestamping, SIOCSHWTSTAMP ioctl must be supported
and that SIOCGHWTSTAMP ioctl should be supported. Currently, none of
the CAN drivers do so. This is a gap.
Furthermore, even if not specified, the tools based on libpcap
(e.g. tcpdump) also expect ethtool_ops::get_ts_info to be implemented.
This last part first adds some generic implementation of
net_device_ops::ndo_eth_ioctl and ethtool_ops::get_ts_info which can
be used by the drivers with hardware timestamping capabilities.
It then uses those generic functions to add ioctl and reporting
functionalities to the drivers with hardware timestamping support
(namely: mcp251xfd, etas_es58x, kvaser_{pciefd,usb}, peak_{canfd,usb})
[1] Kernel doc: Timestamping, section 3.1 "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
* Testing *
I also developed a tool to test all the different timestamps. For
those who would also like to test it, please have a look at:
https://lore.kernel.org/linux-can/20220725134345.432367-1-mailhol.vincent@wanadoo.fr/T/
* Changelog *
changes since v3: https://lore.kernel.org/all/20220726102454.95096-1-mailhol.vincent@wanadoo.fr
* The peak drivers (both PCI and USB) do not support hardware TX
timestamps (only RX). Implement specific ioctl and ethtool
callback functions for this device.
changes since v2: https://lore.kernel.org/all/20220725155354.482986-1-mailhol.vincent@wanadoo.fr
* The c_can, flexcan, mcp251xfd and the slcan drivers already
declared a struct ethtool_ops. Do not declare again the same
structure and instead populate the .get_ts_info() field of the
existing structures.
changes since v1: https://lore.kernel.org/all/20220725133208.432176-1-mailhol.vincent@wanadoo.fr
* First series had a patch to implement
ethtool_ops::get_drvinfo. This proved to be useless. This patch
was removed and all the clean-up patches made in preparation of
that one were moved to a separate series:
https://lore.kernel.org/linux-can/20220725153124.467061-1-mailhol.vincent@wanadoo.fr/T/#u
====================
Link: https://lore.kernel.org/all/20220727101641.198847-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, userland has no method to query which timestamping features
are supported by the kvaser_usb driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-13-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, userland has no method to query which timestamping features
are supported by the kvaser_pciefd driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-12-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, userland has no method to query which timestamping features
are supported by the etas_es58x driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping is supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, userland has no methods to query which timestamping
features are supported by the mcp251xfd driver (aside maybe of getting
RX messages and observe whether or not hardware timestamps stay at
zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add function can_ethtool_op_get_ts_info_hwts(). This function will be
used by CAN devices with hardware TX/RX timestamping support to
implement ethtool_ops::get_ts_info. This function does not offer
support to activate/deactivate hardware timestamps at device level nor
support the filter options (which is currently the case for all CAN
devices with hardware timestamping support).
The fact that hardware timestamp can not be deactivated at hardware
level does not impact the userland. As long as the user do not set
SO_TIMESTAMPING using a setsockopt() or ioctl(), the kernel will not
emit TX timestamps (RX timestamps will still be reproted as it is the
case currently).
Drivers which need more fine grained control remains free to implement
their own function, but we foresee that the generic function
introduced here will be sufficient for the majority.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Because of the loopback feature of socket CAN, hardware TX timestamps
are nothing else than the hardware RX timespamp of the corresponding
loopback packet. This patch simply reuses the hardware RX timestamp.
The rationale to clone this timestamp value is that existing tools
which rely of libpcap (such as tcpdump) expect support for both TX and
RX hardware timestamps in order to activate the feature (i.e. no
granular control to activate either of TX or RX hardware timestamps).
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, some CAN drivers support hardware timestamping, some do
not. But userland has no method to query which features are supported
(aside maybe of getting RX messages and observe whether or not
hardware timestamps stay at zero).
The canonical way for a network driver to advertised what kind of
timestamping it supports is to implement ethtool_ops::get_ts_info().
This patch only targets the CAN drivers which *do not* support
hardware timestamping. For each of those CAN drivers, implement the
get_ts_info() using the generic ethtool_op_get_ts_info().
This way, userland can do:
| $ ethtool --show-time-stamping canX
to confirm the device timestamping capacities.
N.B. the drivers which support hardware timestamping will be migrated
in separate patches.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr
[mkl: mscan: add missing mscan_ethtool_ops]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A recent snafu where Intel ignored upstream feedback on a firmware
change, led to a late rc6 fix being required. In order to avoid this
in the future we should document some expectations around
linux-firmware.
I was originally going to write this for drm, but it seems quite generic
advice.
v2: rewritten with suggestions from Thorsten Leemhuis
v3: rewritten with suggestions from Mauro
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20220721044352.3110507-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 35d099da41, reversing
changes made to 58d8bcd47e.
I wrongly applied that to the net-next tree instead of the intended
target tree (net). Reverting it on net-next.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
see warnings:
| lib/test_printf.c:157:52: error: format specifies type 'unsigned char'
| but the argument has type 'int' [-Werror,-Wformat]
test("0|1|1|128|255",
| "%hhu|%hhu|%hhu|%hhu|%hhu", 0, 1, 257, 128, -1);
-
| lib/test_printf.c:158:55: error: format specifies type 'char' but the
| argument has type 'int' [-Werror,-Wformat] test("0|1|1|-128|-1",
| "%hhd|%hhd|%hhd|%hhd|%hhd", 0, 1, 257, 128, -1);
-
| lib/test_printf.c:159:41: error: format specifies type 'unsigned
short'
| but the argument has type 'int' [-Werror,-Wformat]
| test("2015122420151225", "%ho%ho%#ho", 1037, 5282, -11627);
There's an ongoing movement to eventually enable the -Wformat flag for
clang. Previous patches have targeted incorrect usage of
format specifiers. In this case, however, the "incorrect" format
specifiers are intrinsically part of the test cases. Hence, fixing them
would be misaligned with their intended purpose. My proposed fix is to
simply disable the warnings so that one day a clean build of the kernel
with clang (and -Wformat enabled) would be possible. It would also keep
us in the green for alot of the CI bots.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220718230626.1029318-1-justinstitt@google.com
The GPIO uart functions are documented in Documentation. Move and
transform this documentation into kernel-doc directly in the code and
reference it in Documentation using kernel-doc:.
This makes it easier to update, maintain and check by the build.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the serial (uart_*) functions are documented twice. Once as
kernel-doc along their sources and once in Documentation. So deduplicate
these texts, merge them into kernel-doc in the sources, and link them
using kernel-doc: from the Documentation.
To be properly linked and rendered, tabulators had to be removed from
the comments.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While it's a lot of text, it always helps to keep it up to date when
it's by the source. (And not in a separate file.)
The documentation tooling also makes sure that all members of the
structure are documented. (If not, it complains loudly.)
Finally, there needs to be no comments inlined in the structure, so they
are dropped as they are superfluous now.
The compilation time of this header (tested with serial_core.c) didn't
change in my testing at all.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The info structs are local only to the stm32-usart.c driver and are
triggering sparse warnings about being undecalred. Move these into
the main driver code and make them static to avoid the following
warnings:
drivers/tty/serial/stm32-usart.h:42:25: warning: symbol 'stm32f4_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:63:25: warning: symbol 'stm32f7_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:85:25: warning: symbol 'stm32h7_info' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Link: https://lore.kernel.org/r/20220721212430.453192-1-ben-linux@fluff.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LPUART hardware doesn't zero out the parity bit on the received
characters. This behavior won't impact the use cases of CS8 because
the parity bit is the 9th bit which is not currently used by software.
But the parity bit for CS7 must be zeroed out by software in order to
get the correct raw data.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220714185858.615373-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the logic around call to clk_round_rate(), for some corner conditions,
get_clk_div_rate() could return an sub-optimal clock rate. Also, if an
exact clock rate was not found lowest clock was being returned.
Search for suitable clock rate in 2 steps
a) exact match or within 2% tolerance
b) within 5% tolerance
This also takes care of corner conditions.
Fixes: c2194bc999 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1657911343-1909-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error path when get clock frequency fails in bcm2835aux_serial
driver does not correctly disable the clock.
This flaw was found using a static analysis tool "Hulk Robot", which
reported the following warning when analyzing linux-next/master:
drivers/tty/serial/8250/8250_bcm2835aux.c:
warning: clk_disable_unprepare_missing.cocci
The cocci script checks for the existence of clk_disable_unprepare()
paired with clk_prepare_enable().
Add the missing clk_disable_unprepare() to the error path.
Fixes: fcc446c8aa ("serial: 8250_bcm2835aux: Add ACPI support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Guo Mengqi <guomengqi3@huawei.com>
Link: https://lore.kernel.org/r/20220715023312.37808-1-guomengqi3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dario Binacchi <dario.binacchi@amarulasolutions.com> says:
====================
With this series I try to finish the task, started with the series [1],
of completely removing the dependency of the slcan driver from the
userspace slcand/slcan_attach applications.
The series also contains patches that remove the legacy stuff (slcan_devs,
SLCAN_MAGIC, ...) and do some module cleanup.
The series has been created on top of the patches:
can: slcan: convert comments to network style comments
can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level()
can: slcan: fix whitespace issues
can: slcan: convert comparison to NULL into !val
can: slcan: clean up if/else
can: slcan: use scnprintf() as a hardening measure
can: slcan: do not report txerr and rxerr during bus-off
can: slcan: do not sleep with a spin lock held
applied to linux-next.
[1] https://lore.kernel.org/all/20220628163137.413025-1-dario.binacchi@amarulasolutions.com
Changes since v3: https://lore.kernel.org/all/20220726210217.3368497-1-dario.binacchi@amarulasolutions.com
- Add Max Staudt's `Reviewed-by' tag.
- Drop the patch "ethtool: add support to get/set CAN bit time register".
- Drop the patch "can: slcan: add support to set bit time register (btr)".
- Remove the RFC prefix from the series.
Changes since v2: https://lore.kernel.org/all/20220725065419.3005015-1-dario.binacchi@amarulasolutions.com
- Update the commit message.
- Use 1 space in front of the =.
- Put the series as RFC again.
- Pick up the patch "can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names".
- Add the patch "ethtool: add support to get/set CAN bit time register"
to the series.
- Add the patch "can: slcan: add support to set bit time register (btr)"
to the series.
- Replace the link https://marc.info/?l=linux-can&m=165806705927851&w=2 with
https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.net.
- Add the `Suggested-by' tag.
Changes since RFC: https://lore.kernel.org/all/20220716170007.2020037-1-dario.binacchi@amarulasolutions.com
- Re-add headers that export at least one symbol used by the module.
- Update the commit description.
- Drop the old "slcan" name to use the standard canX interface naming.
- Remove comment on listen-only command.
- Update the commit subject and description.
- Add the patch "MAINTAINERS: Add myself as maintainer of the SLCAN driver"
to the series.
====================
mkl: rebased to can-next/master
Link: https://lore.kernel.org/all/20220728070254.267974-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
