In the driver there are parts of code where the prefix `slc' is used and
others where the prefix `slcan' is used instead. The patch replaces
every occurrence of `slc' with `slcan', except for the netdev functions
where, to avoid compilation conflicts, it was necessary to replace `slc'
with `slcan_netdev'.
The patch does not make any functional changes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Taking inspiration from the drivers/net/can/can327.c driver and at the
suggestion of its author Max Staudt, I removed legacy stuff like
`SLCAN_MAGIC' and `slcan_devs' resulting in simplification of the code
and its maintainability.
The use of slcan_devs is derived from a very old kernel, since slip.c
is about 30 years old, so today's kernel allows us to remove it.
The .hangup() ldisc function, which only called the ldisc .close(), has
been removed since the ldisc layer calls .close() in a good place
anyway.
The old slcanX name has been dropped in order to use the standard canX
interface naming. The ioctl SIOCGIFNAME can be used to query the name of
the created interface. Furthermore, there are several ways to get stable
interfaces names in user space, e.g. udev or systemd-networkd.
The `maxdev' module parameter has also been removed.
CC: Max Staudt <max@enpas.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20220728070254.267974-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for adding a random offset to the stack while handling
syscalls. This patch uses mftb() instead of get_random_int() for better
performance.
In order to avoid unconditional stack canaries on syscall entry (due to
the use of alloca()), also disable stack protector to avoid triggering
needless checks and slowing down the entry path. As there is no general
way to control stack protector coverage with a function attribute, this
must be disabled at the compilation unit level.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701082435.126596-3-xiujianfeng@huawei.com
This is a lead-up patch to enable syscall stack randomization, which
uses alloca() and makes the compiler add unconditional stack canaries
on syscall entry. In order to avoid triggering needless checks and
slowing down the entry path, the feature needs to disable stack
protector at the compilation unit level as there is no general way to
control stack protector coverage with a function attribute.
So move system_call_exception() to syscall.c to avoid affecting other
functions in interrupt.c.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701082435.126596-2-xiujianfeng@huawei.com
The preferred nomenclature is pnv_, not powernv_, but rng.c used
powernv_ for some reason, which isn't consistent with the rest. A recent
commit added a few pnv_ functions to rng.c, making the file a bit of a
mishmash. This commit just replaces the rest of them.
Fixes: f3eac42665 ("powerpc/powernv: wire up rng during setup_arch")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Reorder after bug fix commits]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-3-mpe@ellerman.id.au
The existing logic in KVM to support guests calling H_RANDOM only works
on Power8, because it looks for an RNG in the device tree, but on Power9
we just use darn.
In addition the existing code needs to work in real mode, so we have the
special cased powernv_get_random_real_mode() to deal with that.
Instead just have KVM call ppc_md.get_random_seed(), and do the real
mode check inside of there, that way we use whatever RNG is available,
including darn on Power9.
Fixes: e928e9cb36 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Rebase on previous commit, update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-2-mpe@ellerman.id.au
On a bare-metal Power8 system that doesn't have an "ibm,power-rng", a
malicious QEMU and guest that ignore the absence of the
KVM_CAP_PPC_HWRNG flag, and calls H_RANDOM anyway, will dereference a
NULL pointer.
In practice all Power8 machines have an "ibm,power-rng", but let's not
rely on that, add a NULL check and early return in
powernv_get_random_real_mode().
Fixes: e928e9cb36 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-1-mpe@ellerman.id.au
The ISA states: "when ACC[i] contains defined data, the contents of VSRs
4×i to 4×i+3 are undefined until either a VSX Move From ACC instruction
is used to copy the contents of ACC[i] to VSRs 4×i to 4×i+3 or some other
instruction directly writes to one of these VSRs." We aren't doing this.
This test only works on Power10 because the hardware implementation
happens to map ACC0 to VSRs 0-3, but will fail on any other implementation
that doesn't do this. So add xxmfacc between writing to the accumulator
and accessing the VSRs.
Fixes: 3527e1ab9a ("selftests/powerpc: Add matrix multiply assist (MMA) test")
Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617043935.428083-1-rashmica@linux.ibm.com
Returning an error in .remove() doesn't prevent a driver from being
unloaded. On unbind this only results in an error message, but the
device is remove anyhow.
I guess the author's idea of just returning -EPERM in .remove() was to
prevent unbinding a device. To achieve that set the suppress_bind_attrs
driver property and drop the useless .remove callback.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707061441.193869-2-u.kleine-koenig@pengutronix.de
DT law_trgt_if property defines Local Access Window Target Interface.
Local Access Window Target Interface is used for identifying individual
peripheral and mapping its memory to CPU. Interface id is defined by
hardware itself.
U-Boot uses law_trgt_if DT property in PCIe nodes for configuring memory
mapping of individual PCIe controllers.
Linux kernel fsl_pci.c driver currently does not touch Local Access Window
and expects that U-Boot configures it properly.
Add law_trgt_if property to PCIe DT nodes for P2020. This allows usage of
kernel P2020 PCIe DT nodes in U-Boot. And therefore allows to share P2020
DTS files between Linux kernel and U-Boot.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504180822.29782-1-pali@kernel.org
Other Linux architectures use DT property 'linux,pci-domain' for
specifying fixed PCI domain of PCI controller specified in Device-Tree.
And lot of Freescale powerpc boards have defined numbered pci alias in
Device-Tree for every PCIe controller which number specify preferred PCI
domain.
So prefer usage of DT property 'linux,pci-domain' (via function
of_get_pci_domain_nr()) and DT pci alias (via function
of_alias_get_id()) on powerpc architecture for assigning PCI domain to
PCI controller.
Fixes: 63a72284b1 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706102148.5060-2-pali@kernel.org
PowerVM provides an isolated Platform Keystore(PKS) storage allocation
for each LPAR with individually managed access controls to store
sensitive information securely. It provides a new set of hypervisor
calls for Linux kernel to access PKS storage.
Define POWER LPAR Platform KeyStore(PLPKS) driver using H_CALL interface
to access PKS storage.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220723113048.521744-2-nayna@linux.ibm.com
The existing iommu_table_in_use() helper checks if the kernel is using
any of TCEs. There are some reserved TCEs:
1) the very first one if DMA window starts from 0 to avoid having a zero
but still valid DMA handle;
2) it_reserved_start..it_reserved_end to exclude MMIO32 window in case
the default window spans across that - this is the default for the first
DMA window on PowerNV.
When 1) is the case and 2) is not the helper does not skip 1) and returns
wrong status.
This only seems occurring when passing through a PCI device to a nested
guest (not something we support really well) so it has not been seen
before.
This fixes the bug by adding a special case for no MMIO32 reservation.
Fixes: 3c33066a21 ("powerpc/kernel/iommu: Add new iommu_table_in_use() helper")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714081119.3714605-1-aik@ozlabs.ru
The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.
This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.
This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
The pseries platform uses 32bit default DMA window (always 4K pages) and
optional 64bit DMA window available via DDW ("Dynamic DMA Windows"),
64K or 2M pages. For ages the default one was not removed and a huge
window was created in addition. Things changed with SRIOV-enabled
PowerVM which creates a default-and-bigger DMA window in 64bit space
(still using 4K pages) for IOV VFs so certain OSes do not need to use
the DDW API in order to utilize all available TCE budget.
Linux on the other hand removes the default window and creates a bigger
one (with more TCEs or/and a bigger page size - 64K/2M) in a bid to map
the entire RAM, and if the new window size is smaller than that - it
still uses this new bigger window. The result is that the default window
is removed but the "ibm,dma-window" property is not.
When kdump is invoked, the existing code tries reusing the existing 64bit
DMA window which location and parameters are stored in the device tree but
this fails as the new property does not make it to the kdump device tree
blob. So the code falls back to the default window which does not exist
anymore although the device tree says that it does. The result of that
is that PCI devices become unusable and cannot be used for kdumping.
This preserves the DMA64 and DIRECT64 properties in the device tree blob
for the crash kernel. Since the crash kernel setup is done after device
drivers are loaded and probed, the proper DMA config is stored at least
for boot time devices.
Because DDW window is optional and the code configures the default window
first, the existing code creates an IOMMU table descriptor for
the non-existing default DMA window. It is harmless for kdump as it does
not touch the actual window (only reads what is mapped and marks those IO
pages as used) but it is bad for kexec which clears it thinking it is
a smaller default window rather than a bigger DDW window.
This removes the "ibm,dma-window" property from the device tree after
a bigger window is created and the crash kernel setup picks it up.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629060614.1680476-1-aik@ozlabs.ru
During kdump, two set of NMI IPIs are sent to secondary CPUs, if
'crash_kexec_post_notifiers' option is set. The first set of NMI IPIs
to stop the CPUs and the other set to collect register data. Instead,
capture register data for secondary CPUs while stopping them itself.
Also, fallback to smp_send_stop() in case the function gets called
without kdump configured.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630064942.192283-1-hbathini@linux.ibm.com
A subsequent commit to cleanup powerpc's asm/prom.h leads to build
errors in mpc85xx_edac.c due to missing headers. Include all required
headers directly to avoid the build failure.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc's asm/prom.h brings some headers that it doesn't need itself.
Once those headers are removed from asm/prom.h, the following
errors occur:
CC [M] drivers/scsi/cxlflash/ocxl_hw.o
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_map_irq':
drivers/scsi/cxlflash/ocxl_hw.c:195:16: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
195 | virq = irq_create_mapping(NULL, irq->hwirq);
| ^~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c:222:9: error: implicit declaration of function 'irq_dispose_mapping' [-Werror=implicit-function-declaration]
222 | irq_dispose_mapping(virq);
| ^~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_unmap_irq':
drivers/scsi/cxlflash/ocxl_hw.c:264:13: error: implicit declaration of function 'irq_find_mapping'; did you mean 'is_cow_mapping'? [-Werror=implicit-function-declaration]
264 | if (irq_find_mapping(NULL, irq->hwirq)) {
| ^~~~~~~~~~~~~~~~
| is_cow_mapping
cc1: some warnings being treated as errors
Fix it by including linux/irqdomain.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c6c0cc5e9179a642370a61439f95158271a78c03.1657264228.git.christophe.leroy@csgroup.eu
Commit 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.
It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().
As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.
Fixes: 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For erase operations, reg_proto must be used as indicated in
struct spi_nor description in spi-nor.h.
This issue was found when DT property spi-tx-bus-width is set to 4.
In this case the spi_mem_op->addr.buswidth is set to 4 for erase command
which is not correct.
Tested on stm32mp157c-ev1 board with mx66l51235f spi-nor.
Fixes: 0e30f47232 ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
[ta: use nor->reg_proto in spi_nor_controller_ops_erase()]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220629133013.3382393-1-patrice.chotard@foss.st.com
The S25HL-T/S25HS-T family is the Infineon SEMPER Flash with Quad SPI.
These Infineon chips support volatile version of configuration registers
and it is recommended to update volatile registers in the field application
due to a risk of the non-volatile registers corruption by power interrupt.
Add support for volatile QE bit.
For the single-die package parts (512Mb and 1Gb), only bottom 4KB and
uniform sector sizes are supported. This is due to missing or incorrect
entries in SMPT. Fixup for other sector sizes configurations will be
followed up as needed.
Tested on Xilinx Zynq-7000 FPGA board.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220725092505.446315-8-tudor.ambarus@microchip.com
We need to track the flash's internal address mode as there are flashes
that can operate with 4B opcodes but unfortunately do not have a 4B opcode
correspondent for all the 3B opcodes. Such an example is the Infineon
Semper chips which provide 4B opcodes for read/program/erase but do not
provide 4B opcodes for Read/Write Any Register. These registers are
indexed by address and require the internal address mode of the flash
before Read/Write Any Register opcodes are issued.
4B opcodes are preferred over changing the flash's address mode to 4byte,
as set_4byte_addr_mode could be done in a non-volatile way and could break
the boot sequence. Thus we need to track the flash's internal address mode
so that we can use 4B opcodes together with opcodes that don't have a 4B
opcode correspondent. Track flash's internal address mode.
addr_mode_nbytes is discovered when parsing BFPT. For the
BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 case, one could introduce a method that
queries the flash's internal address mode at run-time (works for Winbond).
If a run-time querying can not be accomplished or if SFDP is not defined
at all, but the address mode is volatile and resets to a default known
value at boot, one can change the default addr_mode_nbytes value of 3 by
introducing a flash_info flag. If the address mode can not be queried,
discovered and it is configured via a non-volatile register, we may
introduce a dt property, but it will harm the generic approach of the
jedec,spi-nor compatible. All this complexity is not needed now, so let it
for future development.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220725092505.446315-6-tudor.ambarus@microchip.com
At the SFDP parsing time we should not change members of struct spi_nor,
but instead fill members of struct spi_nor_flash_parameters which could
later on be used by callers. The caller will then decide if SFDP params
should be used and more importantly when they should be used. Clean the
code flow and don't initialize nor->addr_nbytes at SFDP parsing time.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220725092505.446315-4-tudor.ambarus@microchip.com
A NULL pointer dereference was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__list_del_entry_valid+0x26/0x80
Call Trace:
<TASK>
sctp_sched_dequeue_common+0x1c/0x90
sctp_sched_prio_dequeue+0x67/0x80
__sctp_outq_teardown+0x299/0x380
sctp_outq_free+0x15/0x20
sctp_association_free+0xc3/0x440
sctp_do_sm+0x1ca7/0x2210
sctp_assoc_bh_rcv+0x1f6/0x340
This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.
As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.
Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
