shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-06-07 19:30:30 +09:00
Code Issues Packages Projects Releases Wiki Activity
649,006 Commits 55 Branches 2,486 Tags
f9a06bbe3c8043df5b6afd0f7814fff673fe4e00
Commit Graph

649006 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Joy Cho
f9a06bbe3c ODROID: dts: add hardkernel remote IR table 
Change-Id: I0f02af4becf3059e25062f3e6525b6ad475a1ea7
 2019-12-11 18:19:05 +09:00
Joy Cho
4b07703791 ODROID: clk: add overclocking freq sets 
Conflicts:
	drivers/amlogic/clk/g12a/g12a.h

Change-Id: I82b691007a48b8f24ea7686205a464d54e3277c7
 2019-12-11 16:23:57 +09:00
Joy Cho
4b05b022b0 ODROID: dts: adjust thermal throttling rules 
Change-Id: Iec2c134e2996ea57b7c7fcae394e66d3b7d56593
 2019-12-11 15:55:21 +09:00
Luke Go
6d5360b734 ODROID: dts: Change odm type and mnt_flags on N2. 
Change-Id: Ie4bc1691aa47103990db5b8909572ba2f0ee215c
 2019-12-11 15:55:13 +09:00
Dongjin Kim
b1a7b5ca62 ODROID-COMMON: arm64/config: removing CONFIG_PCI 
Change-Id: I949d7a05cebf2786afe513fa67c0614a4ef2ebea
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:55:05 +09:00
Kevin Kim
b04da58ff0 ODROID-COMMON:Support up to 384KHz sample rate. 
Change-Id: Iad8a1337637b5f09d444c632935a1326123a04d8
 2019-12-11 15:54:20 +09:00
Joy Cho
4aa26e26bd ODROID-N2: cpufreq: Add setup routine to set max cpu freq using boot.ini 
setenv bootargs ${bootargs}
	max_freq_a53=${a53_cpufreq_in_mhz} max_freq_a73=${a73_cpufreq_in_mhz}

ex) setenv bootargs ${bootargs} max_freq_a53=1512 max_freq_a73=1896

Change-Id: I2a9e90c57fe94f43b17dd6408d0a5ab4533a8443
 2019-12-11 15:51:24 +09:00
Dongjin Kim
f8c1a444c0 ODROID-COMMON: mmc/block: add to validate MPT partition table on eMMC 
The 'MPT' partition table is non-standard type which contains the partitions
at certain blocks on eMMC device to provide many partitions more than MBR
partition. When this partition table is discovered, standard partitions
such as MBR are ignored such that only the partitions from MPT are valid.

But there is a kernel crash bug when 'MPT' partition table is not exist.
This patch will check if 'MPT' partition is exist while checking its magic
number and proceed further more if it's valid.

Since Android needs to use 'MPT' partition, this cannot be simply eliminated.

Change-Id: Ic27fef3e28eab009affbb0f11a12472d58a373f6
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:47:35 +09:00
Luke Go
0d1853d9ba ODROID: dts: change odm partition type and flags. 
- ext4 -> vfat.

Change-Id: Ie1c68e28e54321f5f3f890811bff210b7f92fa8b
 2019-12-11 15:47:27 +09:00
Dongjin Kim
4ef8771a67 ODROID: arch/arm64: fix to run 'dtbs_install' 
Change-Id: I3e2249c444aa407712a133837dc3b1d84cdc5682
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:47:17 +09:00
Dongjin Kim
bfed6e2b14 ODROID-COMMON: arch/arm64: remove ',' from model name in a device-tree 
Change-Id: Ie3126e5470e0a8b70661b071d5a76d619ead0538
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:47:09 +09:00
Joy Cho
e6461c976b ODROID-N2: dts: remove usable-memory that overrides memory config as a fixed one 
Change-Id: I0ea7eba3d59deb3ee89a032b138e0c552f89630e
 2019-12-11 15:46:59 +09:00
Joy Cho
cda32a36c8 ODROID-C3: clk: add a new higher cpu frequency, 2GHz for ODROID-C3 
Conflicts:
	drivers/amlogic/clk/g12a/g12a.h

Change-Id: I28496cd7d93c1ccc8770fa010e9ba6f7d2995ed6
 2019-12-11 15:46:35 +09:00
Joy Cho
086700791a ODROID-N2: clk: add cpu overclocking frequency sets 
Change-Id: I47c38143e051faa97234cf05a0b53ac10e404734
 2019-12-11 15:42:15 +09:00
Dongjin Kim
ee1488ae2f ODROID-C3/N2: mmc: remap the MPT partition table 
After reduce the size of boot loader area to fit in 1MB, MPT partition table
can be fit at 2048 LBA and this partition table would be used by Android
for numerous partitions other than Linux based platforms.

Change-Id: Ic8b8defedb4103abf547bae7f533036904578b59
Signed-off-by: Dongjin Kim <tobetter@gmail.com>

Conflicts:
	drivers/mmc/card/block.c
 2019-12-11 15:42:06 +09:00
Dongjin Kim
3f6e08705e ODROID-COMMON: arm64/dts: move common device node into 'mesong12_odroid_common.dtsi' 
Change-Id: I98055ccfb746a33c57d38beac0a1b19ad39b86a9
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:41:47 +09:00
Dongjin Kim
c1248dfce3 ODROID-COMMOM: arm64/dts: build selected device tree 
Change-Id: I37d1aa678d851c9ce994fadf525c9a2fa430f680
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:38:41 +09:00
Dongjin Kim
87e8058d85 ODROID-C3/N2: mmc: read MPT partition from a certain sector 
Change-Id: Ibac5bb733270583f1a3a2ee7a24091c453261753
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:38:29 +09:00
Dongjin Kim
cab14d47f1 ODROID-C3/N2: arm64/dts: remove NAND device nodes 
Change-Id: Icc3b4b1e10de53d0c6190036d1c2f3ddfb1364da
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:38:20 +09:00
Dongjin Kim
19c29f2526 ODROID-C3/N2: usb/phy: use 'CONFIG_ARCH_MESON64_ODROID_COMMON' 
Change-Id: Ib78b7e773705e930f3493fa3b56be2617450d0f2
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:38:01 +09:00
Dongjin Kim
6778b77c3c ODROID-N2: arch/arm64: enable CONFIG_ODROID_N2 
Change-Id: I063fa3c44b96c866d79e7570d4c864972905f83d
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:31:39 +09:00
codewalker
240c9a6fcc ODROID-C3: config: add bluetooth stuffs. 
Change-Id: I6cfbc58d05e9182e37d97ca54881e2f3de5df1df
 2019-12-11 15:31:28 +09:00
codewalker
2a4796c0bd ODROID-C3: config: remove amlogic bt. 
Change-Id: Icdeb0159d553047ca2ed786548b48e43a5b7e0db
 2019-12-11 15:31:18 +09:00
codewalker
7319338b7a ODROID-C3: config: add to enable Hardkernel's ODROID-C3 board 
divide buildroot and android config.

Change-Id: I05a6bd8a2a3df4df5ed98c4b440aa33422c544c8
 2019-12-11 15:31:06 +09:00
Dongjin Kim
a561bbaeb0 ODROID-C3/N2: configs: retune the default kernel config 
Change-Id: I92d70879831321c21095cba5e507a6defc5dba11
Signed-off-by: Dongjin Kim <tobetter@gmail.com>

Conflicts:
	arch/arm64/configs/odroidc3_android_defconfig
 2019-12-11 15:30:58 +09:00
Dongjin Kim
9c7be702ef ODROID-N2: arch/arm64: add kernel config and DTS for ANDROID 
Change-Id: I8e2dd02ae5e7db69dfec1b5167433b198d1e75cc
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:30:41 +09:00
codewalker
73a6828181 ODROID-C3: dts, kbuild: add s905d2_odroidc3_android.dtb 
Change-Id: Id9d7c6c0bd8aad126214f373581922040be7a3f1
 2019-12-11 15:30:32 +09:00
Joy Cho
ce14a513f1 ODROID-N2: add odroid-n2 defconfig and dts 
Conflicts:
	MAINTAINERS

Change-Id: I4d4544e282e60f40b0cb120981ca3701e1db3434
 2019-12-11 15:29:06 +09:00
Luke Go
3e6f224642 ODROID-C3: arm64/dts: Add remote controller mappings. 
Change-Id: I215eb1ae34766840822a9bfd1078de5eba057fdf
 2019-12-11 15:03:52 +09:00
Luke Go
80b9ade1bb ODROID-C3: arm64/dts: Add android firmware & fstab infos. 
- Add android dts.

Change-Id: I0cddcd443735e82ca0b58fb9f696ab2e21e5fa00
 2019-12-11 15:03:40 +09:00
Kevin Kim
914cbd827e ODROID-C3: arm64/dts: changes for sound card configuration 
Change-Id: I45b73be84c7e9a406b1d71ec141f706d40cce228
 2019-12-11 15:03:32 +09:00
Kevin Kim
d4320f5488 ODROID-C3: arm64/dts: add support UHS-1 for uSD card 
Change-Id: I365c7d333ae6a4e1568f7a486ab134f1afb679e3
 2019-12-11 15:03:22 +09:00
Dongjin Kim
f22bb2af44 ODROID-C3: arm64/dts: add 'drive-strength = <3>' to i2c-3 
Change-Id: I440ca37ae62fdfdd9909f7e7121d4ef35ab98130
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:03:13 +09:00
Dongjin Kim
9f6ed4a03d ODROID-C3: config: add to enable RTC driver PCF8563 
Change-Id: I5b6d9ac23d3e930eeffd11725a983515a59b3c93
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:03:02 +09:00
Dongjin Kim
ee6827088f ODROID-C3: arm64/dts: add RTC component 'pcf8563' to 'i2c3' 
Change-Id: I8b55481be6efee867b67f807e9b40870f2b3fc2d
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:02:47 +09:00
Dongjin Kim
34b93a8184 ODROID-C3: config: add to enable Hardkernel's ODROID-C3 board 
Change-Id: I374bed44b920583708ddb5ae719fdaf64fb24783
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:02:35 +09:00
Dongjin Kim
1fe29d0099 ODROID-C3: add new Hardkernel's ARMv8 based board configuration 
Change-Id: I8c20c453c60698b05e3adc7160653e5996a3db9c
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:02:25 +09:00
Dongjin Kim
72602869e4 ODROID-C3: arm64/dts: remove invalid hardware, external LCD panel 
Change-Id: Ib45f41e24ccd3d258d3b9bfea38a4e52d6bc7827
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:02:11 +09:00
Dongjin Kim
dbe8710b98 ODROID-N2: usb/gadget: add 'compat_ioctl(...)' for 32bit Android 
Change-Id: I0ff9c0c97feb7388db8bb8ec4fb283fceb088ee7
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:01:53 +09:00
Dongjin Kim
6944c4ae46 ODROID-C3: arm64/dts: remove non-onboard components on 'i2c0' 
Change-Id: I141f36c3c5b7dbaf1eaaf2d20d7a1d4ee65bf4b6
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:01:43 +09:00
Dongjin Kim
fb303002f3 ODROID-C3: arm64/dts: fix to set the model name 
Change-Id: I490de55a4aae3d93940ea007ac11470cb5a641c2
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:01:24 +09:00
Dongjin Kim
da5ec008c4 ODROID-C3: arm64/dts: add system LED with 'heartbeat' trigger 
Change-Id: I78e85d395975a0c4849b9f67915e3fa680d65e53
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:01:12 +09:00
Robert Richter
2141927ed9 ODROID-C3: dts, kbuild: Implement support for dtb vendor subdirs 
This patch adds support of vendor sub directories for dtb files.
Subdirectories can be specified in $(dts-dirs). Kbuild traverses over
all directories while building and installing dtb files. The directory
tree is also reflected in the install path.

Change-Id: Iab8d4cf4b76f7122892e87137fd0ec60565e1db0
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 15:00:36 +09:00
Robert Richter
536ed4340f ODROID-C3: dts, arm64: Add dtbs_install make target 
This adds the dtbs_install make target to arm64. The target has been
introduced already to arch/arm with the following commit:

 f4d4ffc03e kbuild: dtbs_install: new make target

Implementation for arm64 is the same as for arm.

With 'dtbs_install' all config enabled dtb files are installed to
either the INSTALL_DTBS_PATH directory or the default location:

 $INSTALL_PATH/dtbs/$KERNELRELEASE

Change-Id: I5605ea7d723e2a658f7d85177d1221b83d612bcb
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
 2019-12-11 14:57:48 +09:00
Joy Cho
1982cc2e11 ODROID-C3: arm64: configs: add odroid-c3 defconfig and dts 
Change-Id: I2630a3a3d5ce9489990276ca655f37438ffdef3b
 2019-12-11 14:57:38 +09:00
renjiang.han
76de9b2a7a ppmgr: Unbound kstrdup and Potential Null Dereference. [1/1] 
PD#OTT-4872

Problem:
Unbound kstrdup and Potential Null Dereference.

Solution:
Add a judgment on the return value and the null pointer.

Verify:
on u212

Change-Id: I1e493c8125e08d4a6fb9fb46f28309eba6f0e47b
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
 2019-10-30 16:34:44 +08:00
renjiang.han
68580b1246 ppmgr: modify first frame garbage. [1/1] 
PD#SWPL-9350

Problem:
ppmgr first frame garbage for afbc.

Solution:
alloc canvas.

Verify:
on u212

Change-Id: Ifd8d865240fee07f37d8ed47b224a39f24eac3d4
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
 2019-10-30 16:31:57 +08:00
renjiang.han
26ca83e283 ppmgr: add compatibility with doublewrite. [1/1] 
PD#SWPL-9350

Problem:
For output with compressed and uncompressed formats,
ppmgr recognizes the compressed format and returns directly.

Solution:
add compatibility with doublewrite.

Verify:
on u212

Change-Id: I9fffa720deee80b5db4ef21086c4638a630f9a80
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
 2019-10-30 16:29:12 +08:00
renjiang.han
1f4c27e21f ppmgr: Interlaced video only shows half. [1/1] 
PD#SWPL-9350

Problem:
Interlaced video only shows half.

Solution:
Interlaced video height is divided by 2.

Verify:
on U212

Change-Id: I983e3369687eeb55f03d3e7f8474b9e37549440f
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
 2019-10-30 16:25:02 +08:00
renjiang.han
3c257cbf92 ppmgr: add phy_addr add support. [6/6] 
PD#SWPL-9350

Problem:
ppmgr not support vf with phy_addr.

Solution:
config canvas

Verify:
on U212

Change-Id: I96629ed6287edaf4e7d7a2673ff604e99e3b12df
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
 2019-10-30 16:23:25 +08:00