[ Upstream commit 42012e0436 ]
This is a preparation patch to batch the folio unmapping and moving for
non-hugetlb folios.
If we had batched the folio unmapping, all folios to be migrated would be
unmapped before copying the contents and flags of the folios. If the
folios that were passed to migrate_pages() were too many in unit of pages,
the execution of the processes would be stopped for too long time, thus
too long latency. For example, migrate_pages() syscall will call
migrate_pages() with all folios of a process. To avoid this possible
issue, in this patch, we restrict the number of pages to be migrated to be
no more than HPAGE_PMD_NR. That is, the influence is at the same level of
THP migration.
Link: https://lkml.kernel.org/r/20230213123444.155149-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 35e41024c4c2 ("vmscan,migrate: fix page count imbalance on node stats when demoting pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b85593709 ]
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 35e41024c4c2 ("vmscan,migrate: fix page count imbalance on node stats when demoting pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4a7ac329 ]
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 35e41024c4c2 ("vmscan,migrate: fix page count imbalance on node stats when demoting pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d60d74e852647255bd8e76f5a22dc42531e4389 ]
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Peter Mann <peter.mann@sh.cz>
Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed0360bbab ]
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 1d60d74e8526 ("io_uring/rw: fix missing NOWAIT check for O_DIRECT start write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a370167fe5 ]
This helper does not take a kiocb as input and we want to create a
common helper by that name that takes a kiocb as input.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 1d60d74e8526 ("io_uring/rw: fix missing NOWAIT check for O_DIRECT start write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2f551b1f72b4c508ab9298419f6feadc3b5d791 ]
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d3 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 281dd25c1a018261a04d1b8bf41a0674000bfe38 ]
Under memory pressure it's possible for GFP_ATOMIC order-0 allocations to
fail even though free pages are available in the highatomic reserves.
GFP_ATOMIC allocations cannot trigger unreserve_highatomic_pageblock()
since it's only run from reclaim.
Given that such allocations will pass the watermarks in
__zone_watermark_unusable_free(), it makes sense to fallback to highatomic
reserves the same way that ALLOC_OOM can.
This fixes order-0 page allocation failures observed on Cloudflare's fleet
when handling network packets:
kswapd1: page allocation failure: order:0, mode:0x820(GFP_ATOMIC),
nodemask=(null),cpuset=/,mems_allowed=0-7
CPU: 10 PID: 696 Comm: kswapd1 Kdump: loaded Tainted: G O 6.6.43-CUSTOM #1
Hardware name: MACHINE
Call Trace:
<IRQ>
dump_stack_lvl+0x3c/0x50
warn_alloc+0x13a/0x1c0
__alloc_pages_slowpath.constprop.0+0xc9d/0xd10
__alloc_pages+0x327/0x340
__napi_alloc_skb+0x16d/0x1f0
bnxt_rx_page_skb+0x96/0x1b0 [bnxt_en]
bnxt_rx_pkt+0x201/0x15e0 [bnxt_en]
__bnxt_poll_work+0x156/0x2b0 [bnxt_en]
bnxt_poll+0xd9/0x1c0 [bnxt_en]
__napi_poll+0x2b/0x1b0
bpf_trampoline_6442524138+0x7d/0x1000
__napi_poll+0x5/0x1b0
net_rx_action+0x342/0x740
handle_softirqs+0xcf/0x2b0
irq_exit_rcu+0x6c/0x90
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
[mfleming@cloudflare.com: update comment]
Link: https://lkml.kernel.org/r/20241015125158.3597702-1-matt@readmodwrite.com
Link: https://lkml.kernel.org/r/20241011120737.3300370-1-matt@readmodwrite.com
Link: https://lore.kernel.org/all/CAGis_TWzSu=P7QJmjD58WWiu3zjMTVKSzdOwWE8ORaGytzWJwQ@mail.gmail.com/
Fixes: 1d91df85f3 ("mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIs")
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ebbb21811 ]
GFP_ATOMIC allocations get flagged ALLOC_HARDER which is a vague
description. In preparation for the removal of GFP_ATOMIC redefine
__GFP_ATOMIC to simply mean non-blocking and renaming ALLOC_HARDER to
ALLOC_NON_BLOCK accordingly. __GFP_HIGH is required for access to
reserves but non-blocking is granted more access. For example, GFP_NOWAIT
is non-blocking but has no special access to reserves. A __GFP_NOFAIL
blocking allocation is granted access similar to __GFP_HIGH if the only
alternative is an OOM kill.
Link: https://lkml.kernel.org/r/20230113111217.14134-6-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 281dd25c1a01 ("mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c988dcbecf ]
RT tasks are allowed to dip below the min reserve but ALLOC_HARDER is
typically combined with ALLOC_MIN_RESERVE so RT tasks are a little
unusual. While there is some justification for allowing RT tasks access
to memory reserves, there is a strong chance that a RT task that is also
under memory pressure is at risk of missing deadlines anyway. Relax how
much reserves an RT task can access by treating it the same as __GFP_HIGH
allocations.
Note that in a future kernel release that the RT special casing will be
removed. Hard realtime tasks should be locking down resources in advance
and ensuring enough memory is available. Even a soft-realtime task like
audio or video live decoding which cannot jitter should be allocating both
memory and any disk space required up-front before the recording starts
instead of relying on reserves. At best, reserve access will only delay
the problem by a very short interval.
Link: https://lkml.kernel.org/r/20230113111217.14134-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 281dd25c1a01 ("mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 524c48072e ]
Patch series "Discard __GFP_ATOMIC", v3.
Neil's patch has been residing in mm-unstable as commit 2fafb4fe8f7a ("mm:
discard __GFP_ATOMIC") for a long time and recently brought up again.
Most recently, I was worried that __GFP_HIGH allocations could use
high-order atomic reserves which is unintentional but there was no
response so lets revisit -- this series reworks how min reserves are used,
protects highorder reserves and then finishes with Neil's patch with very
minor modifications so it fits on top.
There was a review discussion on renaming __GFP_DIRECT_RECLAIM to
__GFP_ALLOW_BLOCKING but I didn't think it was that big an issue and is
orthogonal to the removal of __GFP_ATOMIC.
There were some concerns about how the gfp flags affect the min reserves
but it never reached a solid conclusion so I made my own attempt.
The series tries to iron out some of the details on how reserves are used.
ALLOC_HIGH becomes ALLOC_MIN_RESERVE and ALLOC_HARDER becomes
ALLOC_NON_BLOCK and documents how the reserves are affected. For example,
ALLOC_NON_BLOCK (no direct reclaim) on its own allows 25% of the min
reserve. ALLOC_MIN_RESERVE (__GFP_HIGH) allows 50% and both combined
allows deeper access again. ALLOC_OOM allows access to 75%.
High-order atomic allocations are explicitly handled with the caveat that
no __GFP_ATOMIC flag means that any high-order allocation that specifies
GFP_HIGH and cannot enter direct reclaim will be treated as if it was
GFP_ATOMIC.
This patch (of 6):
__GFP_HIGH aliases to ALLOC_HIGH but the name does not really hint what it
means. As ALLOC_HIGH is internal to the allocator, rename it to
ALLOC_MIN_RESERVE to document that the min reserves can be depleted.
Link: https://lkml.kernel.org/r/20230113111217.14134-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20230113111217.14134-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 281dd25c1a01 ("mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6ebf16438de5d712030fefbb4182b46373d677 ]
It turns out since its original introduction, pre-2.6.12,
bus_rescan_devices() has skipped devices that might be in the process of
attaching or detaching from their driver. For CXL this behavior is
unwanted and expects that cxl_bus_rescan() is a probe barrier.
That behavior is simple enough to achieve with bus_for_each_dev() paired
with call to device_attach(), and it is unclear why bus_rescan_devices()
took the position of lockless consumption of dev->driver which is racy.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781104.81806.4277549800082443769.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117932eea99b729ee5d12783601a4f7f5fd58a23 ]
A hung_task problem shown below was found:
INFO: task kworker/0:0:8 blocked for more than 327 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Workqueue: events cgroup_bpf_release
Call Trace:
<TASK>
__schedule+0x5a2/0x2050
? find_held_lock+0x33/0x100
? wq_worker_sleeping+0x9e/0xe0
schedule+0x9f/0x180
schedule_preempt_disabled+0x25/0x50
__mutex_lock+0x512/0x740
? cgroup_bpf_release+0x1e/0x4d0
? cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? cgroup_bpf_release+0x1e/0x4d0
? mutex_lock_nested+0x2b/0x40
? __pfx_delay_tsc+0x10/0x10
mutex_lock_nested+0x2b/0x40
cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? trace_event_raw_event_workqueue_execute_start+0x64/0xd0
? process_scheduled_works+0x161/0x8a0
process_scheduled_works+0x23a/0x8a0
worker_thread+0x231/0x5b0
? __pfx_worker_thread+0x10/0x10
kthread+0x14d/0x1c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x59/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This issue can be reproduced by the following pressuse test:
1. A large number of cpuset cgroups are deleted.
2. Set cpu on and off repeatly.
3. Set watchdog_thresh repeatly.
The scripts can be obtained at LINK mentioned above the signature.
The reason for this issue is cgroup_mutex and cpu_hotplug_lock are
acquired in different tasks, which may lead to deadlock.
It can lead to a deadlock through the following steps:
1. A large number of cpusets are deleted asynchronously, which puts a
large number of cgroup_bpf_release works into system_wq. The max_active
of system_wq is WQ_DFL_ACTIVE(256). Consequently, all active works are
cgroup_bpf_release works, and many cgroup_bpf_release works will be put
into inactive queue. As illustrated in the diagram, there are 256 (in
the acvtive queue) + n (in the inactive queue) works.
2. Setting watchdog_thresh will hold cpu_hotplug_lock.read and put
smp_call_on_cpu work into system_wq. However step 1 has already filled
system_wq, 'sscs.work' is put into inactive queue. 'sscs.work' has
to wait until the works that were put into the inacvtive queue earlier
have executed (n cgroup_bpf_release), so it will be blocked for a while.
3. Cpu offline requires cpu_hotplug_lock.write, which is blocked by step 2.
4. Cpusets that were deleted at step 1 put cgroup_release works into
cgroup_destroy_wq. They are competing to get cgroup_mutex all the time.
When cgroup_metux is acqured by work at css_killed_work_fn, it will
call cpuset_css_offline, which needs to acqure cpu_hotplug_lock.read.
However, cpuset_css_offline will be blocked for step 3.
5. At this moment, there are 256 works in active queue that are
cgroup_bpf_release, they are attempting to acquire cgroup_mutex, and as
a result, all of them are blocked. Consequently, sscs.work can not be
executed. Ultimately, this situation leads to four processes being
blocked, forming a deadlock.
system_wq(step1) WatchDog(step2) cpu offline(step3) cgroup_destroy_wq(step4)
...
2000+ cgroups deleted asyn
256 actives + n inactives
__lockup_detector_reconfigure
P(cpu_hotplug_lock.read)
put sscs.work into system_wq
256 + n + 1(sscs.work)
sscs.work wait to be executed
warting sscs.work finish
percpu_down_write
P(cpu_hotplug_lock.write)
...blocking...
css_killed_work_fn
P(cgroup_mutex)
cpuset_css_offline
P(cpu_hotplug_lock.read)
...blocking...
256 cgroup_bpf_release
mutex_lock(&cgroup_mutex);
..blocking...
To fix the problem, place cgroup_bpf_release works on a dedicated
workqueue which can break the loop and solve the problem. System wqs are
for misc things which shouldn't create a large number of concurrent work
items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent
work items, it should use its own dedicated workqueue.
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ff949441802a8d076d9013c7761f63e8ae5a9bd ]
blk_rq_map_user_bvec contains a check bytes + bv->bv_len > nr_iter which
causes unnecessary failures in NVMe passthrough I/O, reproducible as
follows:
- register a 2 page, page-aligned buffer against a ring
- use that buffer to do a 1 page io_uring NVMe passthrough read
The second (i = 1) iteration of the loop in blk_rq_map_user_bvec will
then have nr_iter == 1 page, bytes == 1 page, bv->bv_len == 1 page, so
the check bytes + bv->bv_len > nr_iter will succeed, causing the I/O to
fail. This failure is unnecessary, as when the check succeeds, it means
we've checked the entire buffer that will be used by the request - i.e.
blk_rq_map_user_bvec should complete successfully. Therefore, terminate
the loop early and return successfully when the check bytes + bv->bv_len
> nr_iter succeeds.
While we're at it, also remove the check that all segments in the bvec
are single-page. While this seems to be true for all users of the
function, it doesn't appear to be required anywhere downstream.
CC: stable@vger.kernel.org
Signed-off-by: Xinyu Zhang <xizhang@purestorage.com>
Co-developed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 3798754793 ("block: extend functionality to map bvec iterator")
Link: https://lore.kernel.org/r/20241023211519.4177873-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b3a033e3ecd3471248d474ef263aadc0059e516a upstream.
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints.
Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com
Fixes: 21fc61c73c ("don't put symlink bodies in pagecache into highmem")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256
Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63dd163cd61dda6f38343776b42331cc6b7e56e0 upstream.
The raw value conversion to obtain a measurement in lux as
INT_PLUS_MICRO does not calculate the decimal part properly to display
it as micro (in this case microlux). It only calculates the module to
obtain the decimal part from a resolution that is 10000 times the
provided in the datasheet (0.5376 lux/cnt for the veml6030). The
resulting value must still be multiplied by 100 to make it micro.
This bug was introduced with the original implementation of the driver.
Only the illuminance channel is fixed becuase the scale is non sensical
for the intensity channels anyway.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241016-veml6030-fix-processed-micro-v1-1-4a5644796437@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efa353ae1b0541981bc96dbf2e586387d0392baa upstream.
In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero.
Cc: stable@vger.kernel.org
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241022134330.574601-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e15d84b3bba187aa372dff7c58ce1fd5cb48a076 upstream.
In the current logic, memory is allocated for storing the MSDU context
during management packet TX but this memory is not being freed during
management TX completion. Similar leaks are seen in the management TX
cleanup logic.
Kmemleak reports this problem as below,
unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s)
hex dump (first 16 bytes):
00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t......
backtrace:
[<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8
[<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110
[<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core]
[<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core]
[<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400
[<ffffffe6e78d60b8>] worker_thread+0x208/0x328
[<ffffffe6e78dc890>] kthread+0x100/0x1c0
[<ffffffe6e78166c0>] ret_from_fork+0x10/0x20
Free the memory during completion and cleanup to fix the leak.
Protect the mgmt_pending_tx idr_remove() operation in
ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to
other instances.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
Fixes: dc405152bb ("ath10k: handle mgmt tx completion event")
Fixes: c730c47717 ("ath10k: Remove msdu from idr when management pkt send fails")
Cc: stable@vger.kernel.org
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://patch.msgid.link/20241015064103.6060-1-quic_mpubbise@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31004740e42846a6f0bb255e6348281df3eb8032 upstream.
Use pm_runtime_put in the remove function and pm_runtime_get to disable
RPM on platforms that don't support runtime D3, as re-enabling it through
sysfs auto power control may cause the controller to malfunction. This
can lead to issues such as hotplug devices not being detected due to
failed interrupt generation.
Fixes: a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states")
Cc: stable <stable@kernel.org>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241024133718.723846-1-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 075919f6df5dd82ad0b1894898b315fbb3c29b84 upstream.
During the aborting of a command, the software receives a command
completion event for the command ring stopped, with the TRB pointing
to the next TRB after the aborted command.
If the command we abort is located just before the Link TRB in the
command ring, then during the 'command ring stopped' completion event,
the xHC gives the Link TRB in the event's cmd DMA, which causes a
mismatch in handling command completion event.
To address this situation, move the 'command ring stopped' completion
event check slightly earlier, since the specific command it stopped
on isn't of significant concern.
Fixes: 7f84eef0da ("USB: xhci: No-op command queueing and irq handler.")
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241022155631.1185-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdce49b5da6e0fb6d077986dec3e90ef2b094b50 upstream.
For devm_usb_put_phy(), its comment says it needs to invoke usb_put_phy()
to release the phy, but it does not do that actually, so it can not fully
undo what the API devm_usb_get_phy() does, that is wrong, fixed by using
devres_release() instead of devres_destroy() within the API.
Fixes: cedf860237 ("usb: phy: move bulk of otg/otg.c to phy/phy.c")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241020-usb_phy_fix-v1-1-7f79243b8e1e@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4413665dd6c528b31284119e3571c25f371e1c36 upstream.
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5189df7b8088268012882c220d6aca4e64981348 ]
The syzbot fuzzer has been encountering "task hung" problems ever
since the dummy-hcd driver was changed to use hrtimers instead of
regular timers. It turns out that the problems are caused by a subtle
difference between the timer_pending() and hrtimer_active() APIs.
The changeover blindly replaced the first by the second. However,
timer_pending() returns True when the timer is queued but not when its
callback is running, whereas hrtimer_active() returns True when the
hrtimer is queued _or_ its callback is running. This difference
occasionally caused dummy_urb_enqueue() to think that the callback
routine had not yet started when in fact it was almost finished. As a
result the hrtimer was not restarted, which made it impossible for the
driver to dequeue later the URB that was just enqueued. This caused
usb_kill_urb() to hang, and things got worse from there.
Since hrtimers have no API for telling when they are queued and the
callback isn't running, the driver must keep track of this for itself.
That's what this patch does, adding a new "timer_pending" flag and
setting or clearing it at the appropriate times.
Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/
Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a723ed3baa941ca4f51d87bab00661f41142835 ]
Currently, the transfer polling interval is set to 1ms, which is the
frame rate of full-speed and low-speed USB. The USB 2.0 specification
introduces microframes (125 microseconds) to improve the timing
precision of data transfers.
Reducing the transfer interval to 1 microframe increases data throughput
for high-speed and super-speed USB communication
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Link: https://lore.kernel.org/r/6295dbb84ca76884551df9eb157cce569377a22c.1712843963.git.sylv@sylv.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
