commit a2796dff62d6c6bfc5fbebdf2bee0d5ac0438906 upstream.
Instead of jumping to the Xen hypercall page for doing the iret
hypercall, directly code the required sequence in xen-asm.S.
This is done in preparation of no longer using hypercall page at all,
as it has shown to cause problems with speculation mitigations.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ef8047b737d7480a5d4c46d956e97c190f13050 upstream.
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dda014ba59331dee4f3b773a020e109932f4bd24 upstream.
The syscall instruction is used in Xen PV mode for doing hypercalls.
Allow syscall to be used in the kernel in case it is tagged with an
unwind hint for objtool.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efbcd61d9bebb771c836a3b8bfced8165633db7c upstream.
In order to be able to differentiate between AMD and Intel based
systems for very early hypercalls without having to rely on the Xen
hypercall page, make get_cpu_vendor() non-static.
Refactor early_cpu_init() for the same reason by splitting out the
loop initializing cpu_devs() into an externally callable function.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9244fb55f37356f75c739c57323d9422d7aa0f8 upstream.
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: d50b7914fa ("xen-netfront: Fix NULL sring after live migration")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b022f0c7e4 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
avoids checking number_of_same_symbols() for module symbol in
__trace_kprobe_create(), but create_local_trace_kprobe() should avoid this
check too. Doing this check leads to ENOENT for module_name:symbol_name
constructions passed over perf_event_open.
No bug in newer kernels as it was fixed more generally by
commit 9d8616034f16 ("tracing/kprobes: Add symbol counting check when module loads")
Link: https://lore.kernel.org/linux-trace-kernel/20240705161030.b3ddb33a8167013b9b1da202@kernel.org
Fixes: b022f0c7e4 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9bd9c498cb0f5843996dbe5cbce7a1836a83c70 upstream.
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5).
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/7e2aa30a62d740db182c170fdd8f81c596df280d.camel@gmail.com
Link: https://lore.kernel.org/bpf/20240924210844.1758441-1-eddyz87@gmail.com
[ shung-hsi.yu: sync_linked_regs() was called find_equal_scalars() before commit
4bf79f9be434 ("bpf: Track equal scalars history on per-instruction level"), and
modification is done because there is only a single call to
copy_register_state() before commit 98d7ca374ba4 ("bpf: Track delta between
"linked" registers."). ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57e420c84f9ab55ba4c5e2ae9c5f6c8e1ea834d2 ]
After a recent change to clamp() and its variants [1] that increases the
coverage of the check that high is greater than low because it can be
done through inlining, certain build configurations (such as s390
defconfig) fail to build with clang with:
block/blk-iocost.c:1101:11: error: call to '__compiletime_assert_557' declared with 'error' attribute: clamp() low limit 1 greater than high limit active
1101 | inuse = clamp_t(u32, inuse, 1, active);
| ^
include/linux/minmax.h:218:36: note: expanded from macro 'clamp_t'
218 | #define clamp_t(type, val, lo, hi) __careful_clamp(type, val, lo, hi)
| ^
include/linux/minmax.h:195:2: note: expanded from macro '__careful_clamp'
195 | __clamp_once(type, val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
| ^
include/linux/minmax.h:188:2: note: expanded from macro '__clamp_once'
188 | BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
| ^
__propagate_weights() is called with an active value of zero in
ioc_check_iocgs(), which results in the high value being less than the
low value, which is undefined because the value returned depends on the
order of the comparisons.
The purpose of this expression is to ensure inuse is not more than
active and at least 1. This could be written more simply with a ternary
expression that uses min(inuse, active) as the condition so that the
value of that condition can be used if it is not zero and one if it is.
Do this conversion to resolve the error and add a comment to deter
people from turning this back into clamp().
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Link: https://lore.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com/ [1]
Suggested-by: David Laight <david.laight@aculab.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/llvm/CA+G9fYsD7mw13wredcZn0L-KBA3yeoVSTuxnss-AEWMN3ha0cA@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120322.3GfVe3vF-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29a651451e6c264f58cd9d9a26088e579d17b242 ]
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bde7c3b3ad0e1f39d6df93dd1c9caf63e19e50f ]
This updates iso_sock_accept to use nested locking for the parent
socket, to avoid lockdep warnings caused because the parent and
child sockets are locked by the same thread:
[ 41.585683] ============================================
[ 41.585688] WARNING: possible recursive locking detected
[ 41.585694] 6.12.0-rc6+ #22 Not tainted
[ 41.585701] --------------------------------------------
[ 41.585705] iso-tester/3139 is trying to acquire lock:
[ 41.585711] ffff988b29530a58 (sk_lock-AF_BLUETOOTH)
at: bt_accept_dequeue+0xe3/0x280 [bluetooth]
[ 41.585905]
but task is already holding lock:
[ 41.585909] ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
[ 41.586064]
other info that might help us debug this:
[ 41.586069] Possible unsafe locking scenario:
[ 41.586072] CPU0
[ 41.586076] ----
[ 41.586079] lock(sk_lock-AF_BLUETOOTH);
[ 41.586086] lock(sk_lock-AF_BLUETOOTH);
[ 41.586093]
*** DEADLOCK ***
[ 41.586097] May be due to missing lock nesting notation
[ 41.586101] 1 lock held by iso-tester/3139:
[ 41.586107] #0: ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77b11c8bf3a228d1c63464534c2dcc8d9c8bf7ff ]
Drivers like mlx5 expose NIC's vlan_features such as
NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are
later not propagated when the underlying devices are bonded and
a vlan device created on top of the bond.
Right now, the more cumbersome workaround for this is to create
the vlan on top of the mlx5 and then enslave the vlan devices
to a bond.
To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES
such that bond_compute_features() can probe and propagate the
vlan_features from the slave devices up to the vlan device.
Given the following bond:
# ethtool -i enp2s0f{0,1}np{0,1}
driver: mlx5_core
[...]
# ethtool -k enp2s0f0np0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k enp2s0f1np1 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k bond0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Before:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: off [requested on]
tx-udp_tnl-csum-segmentation: off [requested on]
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
After:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Various users have run into this reporting performance issues when
configuring Cilium in vxlan tunneling mode and having the combination
of bond & vlan for the core devices connecting the Kubernetes cluster
to the outside world.
Fixes: a9b3ace44c ("bonding: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8d4bc455047cf3903cd6f85f49978987dbb3027 ]
In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100
$ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on the machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
Statistics after 10s of iPerf3 TCP test before the fix (note that
netem's backlog > limit, netem stopped accepting packets):
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0)
backlog 4294528236b 1155p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0)
backlog 0b 0p requeues 0
Statistics after the fix:
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0)
backlog 0b 0p requeues 0
tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'.
The interface fully stops transferring packets and "locks". In this case,
the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at
its limit and no more packets are accepted.
This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is
only decreased when a packet is returned by its dequeue function, and not
during enqueuing into the child qdisc. External updates to 'qlen' are thus
accounted for and only the behavior of the backlog statistics changes. As
in other qdiscs, 'qlen' then keeps track of how many packets are held in
netem and all of its children. As before, sch->limit remains as the
maximum number of packets in the tfifo. The same applies to netem's
backlog statistics.
Fixes: 50612537e9 ("netem: fix classful handling")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241210131412.1837202-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acfcdb78d5d4cdb78e975210c8825b9a112463f6 ]
With this port schedule:
tc qdisc replace dev $send_if parent root handle 100 taprio \
num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
map 0 1 2 3 4 5 6 7 \
base-time 0 cycle-time 10000 \
sched-entry S 01 1250 \
sched-entry S 02 1250 \
sched-entry S 04 1250 \
sched-entry S 08 1250 \
sched-entry S 10 1250 \
sched-entry S 20 1250 \
sched-entry S 40 1250 \
sched-entry S 80 1250 \
flags 2
ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this:
increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug
ptp4l[4134.168]: port 2: send peer delay response failed
It turns out that the driver can't take their TX timestamps because it
can't transmit them in the first place. And there's nothing special
about the Pdelay_Resp packets - they're just regular 68 byte packets.
But with this taprio configuration, the switch would refuse to send even
the ETH_ZLEN minimum packet size.
This should have definitely not been the case. When applying the taprio
config, the driver prints:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent
without problems. Yet it's not.
For the forwarding path, the configuration is fine, yet packets injected
from Linux get stuck with this schedule no matter what.
The first hint that the static guard bands are the cause of the problem
is that reverting Michael Walle's commit 297c4de6f7 ("net: dsa: felix:
re-enable TAS guard band mode") made things work. It must be that the
guard bands are calculated incorrectly.
I remembered that there is a magic constant in the driver, set to 33 ns
for no logical reason other than experimentation, which says "never let
the static guard bands get so large as to leave less than this amount of
remaining space in the time slot, because the queue system will refuse
to schedule packets otherwise, and they will get stuck". I had a hunch
that my previous experimentally-determined value was only good for
packets coming from the forwarding path, and that the CPU injection path
needed more.
I came to the new value of 35 ns through binary search, after seeing
that with 544 ns (the bit time required to send the Pdelay_Resp packet
at gigabit) it works. Again, this is purely experimental, there's no
logic and the manual doesn't say anything.
The new driver prints for this schedule look like this:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
So yes, the maximum MTU is now even smaller by 1 byte than before.
This is maybe counter-intuitive, but makes more sense with a diagram of
one time slot.
Before:
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<----><---------------------------------------------->
33 ns 1217 ns static guard band
useful
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<-----><--------------------------------------------->
35 ns 1215 ns static guard band
useful
The static guard band implemented by this switch hardware directly
determines the maximum allowable MTU for that traffic class. The larger
it is, the earlier the switch will stop scheduling frames for
transmission, because otherwise they might overrun the gate close time
(and avoiding that is the entire purpose of Michael's patch).
So, we now have guard bands smaller by 2 ns, thus, in this particular
case, we lose a byte of the maximum MTU.
Fixes: 11afdc6526 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 984795e76def5c903724b8d6a8228e356bbdf2af ]
With the current implementation, when ACP driver fails to read
ACPI _WOV entry then the DMI overrides code won't invoke,
may cause regressions for some BIOS versions.
Add a condition check to jump to check the DMI entries incase of
ACP driver fail to read ACPI _WOV method.
Fixes: 4095cf872084 (ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry)
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241210091026.996860-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit becc6399ce3b724cffe9ccb7ef0bff440bb1b62b ]
The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dba406fac06b009873fe7a28231b9b7e4288b09 ]
Storing the maximum clock speed in module parameter qcaspi_clkspeed
has the unintended side effect that the first probed instance
defines the value for all other instances. Fix this issue by storing
it in max_speed_hz of the relevant SPI device.
This fix keeps the priority of the speed parameter (module parameter,
device tree property, driver default). Btw this uses the opportunity
to get the rid of the unused member clkspeed.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 356983f569c1f5991661fc0050aa263792f50616 ]
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7899ca9f3bd2b008e9a7c41f2a9f1986052d7e96 ]
In acpi_decode_space() addr->info.mem.caching is checked on main level
for any resource type but addr->info.mem is part of union and thus
valid only if the resource type is memory range.
Move the check inside the preceeding switch/case to only execute it
when the union is of correct type.
Fixes: fcb29bbcd5 ("ACPI: Add prefetch decoding to the address space parser")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20241202100614.20731-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddd7ba006078a2bef5971b2dc5f8383d47f96207 ]
On port initialization, we configure the maximum frame length accepted
by the receive module associated with the port. This value is currently
written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in
fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix
this.
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f004f2e535e2b66ccbf5ac35f8eaadeac70ad7b7 ]
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43a4166349a254446e7a3db65f721c6a30daccf3 ]
An unsupported RX filter will leave the port with TX timestamping still
applied as per the new request, rather than the old setting. When
parsing the tx_type, don't apply it just yet, but delay that until after
we've parsed the rx_filter as well (and potentially returned -ERANGE for
that).
Similarly, copy_to_user() may fail, which is a rare occurrence, but
should still be treated by unwinding what was done.
Fixes: 96ca08c058 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b454abfab52543c44b581afc807b9f97fc1e7a3a ]
The Felix DSA driver presents unique challenges that make the simplistic
ocelot PTP TX timestamping procedure unreliable: any transmitted packet
may be lost in hardware before it ever leaves our local system.
This may happen because there is congestion on the DSA conduit, the
switch CPU port or even user port (Qdiscs like taprio may delay packets
indefinitely by design).
The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(),
runs out of timestamp IDs eventually, because it never detects that
packets are lost, and keeps the IDs of the lost packets on hold
indefinitely. The manifestation of the issue once the entire timestamp
ID range becomes busy looks like this in dmesg:
mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp
mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp
At the surface level, we need a timeout timer so that the kernel knows a
timestamp ID is available again. But there is a deeper problem with the
implementation, which is the monotonically increasing ocelot_port->ts_id.
In the presence of packet loss, it will be impossible to detect that and
reuse one of the holes created in the range of free timestamp IDs.
What we actually need is a bitmap of 63 timestamp IDs tracking which one
is available. That is able to use up holes caused by packet loss, but
also gives us a unique opportunity to not implement an actual timer_list
for the timeout timer (very complicated in terms of locking).
We could only declare a timestamp ID stale on demand (lazily), aka when
there's no other timestamp ID available. There are pros and cons to this
approach: the implementation is much more simple than per-packet timers
would be, but most of the stale packets would be quasi-leaked - not
really leaked, but blocked in driver memory, since this algorithm sees
no reason to free them.
An improved technique would be to check for stale timestamp IDs every
time we allocate a new one. Assuming a constant flux of PTP packets,
this avoids stale packets being blocked in memory, but of course,
packets lost at the end of the flux are still blocked until the flux
resumes (nobody left to kick them out).
Since implementing per-packet timers is way too complicated, this should
be good enough.
Testing procedure:
Persistently block traffic class 5 and try to run PTP on it:
$ tc qdisc replace dev swp3 parent root taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0xdf 100000 flags 0x2
[ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
$ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3
ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[70.406]: timed out while polling for tx timestamp
ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[70.406]: port 1 (swp3): send peer delay response failed
ptp4l[70.407]: port 1 (swp3): clearing fault immediately
ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1
ptp4l[71.400]: timed out while polling for tx timestamp
ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[71.401]: port 1 (swp3): send peer delay response failed
ptp4l[71.401]: port 1 (swp3): clearing fault immediately
[ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2
ptp4l[72.401]: timed out while polling for tx timestamp
ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[72.402]: port 1 (swp3): send peer delay response failed
ptp4l[72.402]: port 1 (swp3): clearing fault immediately
ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3
ptp4l[73.400]: timed out while polling for tx timestamp
ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[73.400]: port 1 (swp3): send peer delay response failed
ptp4l[73.400]: port 1 (swp3): clearing fault immediately
[ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4
ptp4l[74.400]: timed out while polling for tx timestamp
ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[74.401]: port 1 (swp3): send peer delay response failed
ptp4l[74.401]: port 1 (swp3): clearing fault immediately
ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[75.410]: timed out while polling for tx timestamp
ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[75.411]: port 1 (swp3): send peer delay response failed
ptp4l[75.411]: port 1 (swp3): clearing fault immediately
(...)
Remove the blocking condition and see that the port recovers:
$ same tc command as above, but use "sched-entry S 0xff" instead
$ same ptp4l command as above
ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost
[ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost
[ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost
[ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost
[ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d
ptp4l[104.966]: port 1 (swp3): assuming the grand master role
ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER
[ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0
(...)
Notice that in this new usage pattern, a non-congested port should
basically use timestamp ID 0 all the time, progressing to higher numbers
only if there are unacknowledged timestamps in flight. Compare this to
the old usage, where the timestamp ID used to monotonically increase
modulo OCELOT_MAX_PTP_ID.
In terms of implementation, this simplifies the bookkeeping of the
ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse
the list of two-step timestampable skbs for each new packet anyway, the
information can already be computed and does not need to be stored.
Also, ocelot_port->tx_skbs is always accessed under the switch-wide
ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's
lock and can use the unlocked primitives safely.
This problem was actually detected using the tc-taprio offload, and is
causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959)
supports but Ocelot (VSC7514) does not. Thus, I've selected the commit
to blame as the one adding initial timestamping support for the Felix
switch.
Fixes: c0bcf53766 ("net: dsa: ocelot: add hardware timestamping support for Felix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c53cdb95eb4a604062e326636971d96dd9b1b26 ]
ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as
such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler().
As such, it runs with IRQs enabled, and not in hardirq context. Thus,
ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot
be preempted by ocelot_get_txtstamp(). For the same reason,
dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in
this calling context, so just simplify the dev_kfree_skb_any() call to
kfree_skb().
Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context,
not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the
ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs.
This is part of a larger rework of the TX timestamping procedure.
A logical subportion of the rework has been split into a separate
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b454abfab525 ("net: mscc: ocelot: be resilient to loss of PTP packets during transmission")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6fba4b3f0becb794e274430f3a0839d8ba31262 ]
This condition, theoretically impossible to trigger, is not really
handled well. By "continuing", we are skipping the write to SYS_PTP_NXT
which advances the timestamp FIFO to the next entry. So we are reading
the same FIFO entry all over again, printing stack traces and eventually
killing the kernel.
No real problem has been observed here. This is part of a larger rework
of the timestamp IRQ procedure, with this logical change split out into
a patch of its own. We will need to "goto next_ts" for other conditions
as well.
Fixes: 9fde506e0c ("net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b01bec25bef62544228bce06db6a3afa5d3d6bb ]
If ocelot_port_add_txtstamp_skb() fails, for example due to a full PTP
timestamp FIFO, we must undo the skb_clone_sk() call with kfree_skb().
Otherwise, the reference to the skb clone is lost.
Fixes: 52849bcf00 ("net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e7aa97c7acf171275ac02a8bb018c31b8918d13 ]
The caller, ptp_kvm_init(), emits a warning if kvm_arch_ptp_init() exits
with any error which is not EOPNOTSUPP:
"fail to initialize ptp_kvm"
Replace ENODEV with EOPNOTSUPP to avoid this spurious warning,
aligning with the ARM implementation.
Fixes: a86ed2cfa1 ("ptp: Don't print an error if ptp_kvm is not supported")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241203-kvm_ptp-eopnotsuppp-v2-1-d1d060f27aa6@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6365ba64b4 ]
KVM_HC_CLOCK_PAIRING currently fails inside SEV-SNP guests because the
guest passes an address to static data to the host. In confidential
computing the host can't access arbitrary guest memory so handling the
hypercall runs into an "rmpfault". To make the hypercall work, the guest
needs to explicitly mark the memory as decrypted. Do that in
kvm_arch_ptp_init(), but retain the previous behavior for
non-confidential guests to save us from having to allocate memory.
Add a new arch-specific function (kvm_arch_ptp_exit()) to free the
allocation and mark the memory as encrypted again.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230308150531.477741-1-jpiotrowski@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5e7aa97c7acf ("ptp: kvm: x86: Return EOPNOTSUPP instead of ENODEV from kvm_arch_ptp_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f2c7ab15fd806043db1a7d54b5ec36be0bd93b1 ]
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf3515c556907b4da290967a2a6cbbd9ee0ee723 ]
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11776cff0b563c8b8a4fa76cab620bfb633a8cb8 ]
The dr_domain_add_vport_cap() function generally returns NULL on error
but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can
retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM
and if it's and -ENOMEM then the error pointer is propogated back and
eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag().
Fixes: 11a45def2e ("net/mlx5: DR, Add support for SF vports")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/07477254-e179-43e2-b1b3-3b9db4674195@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fff8f17c1a6fc802ca23bbd3a276abfde8cc58e6 ]
When TT changes list is too big to fit in packet due to MTU size, an
empty OGM is sent expected other node to send TT request to get the
changes. The issue is that tt.last_changeset was not built thus the
originator was responding with previous changes to those TT requests
(see batadv_send_my_tt_response). Also the changes list was never
cleaned up effectively never ending growing from this point onwards,
repeatedly sending the same TT response changes over and over, and
creating a new empty OGM every OGM interval expecting for the local
changes to be purged.
When there is more TT changes that can fit in packet, drop all changes,
send empty OGM and wait for TT request so we can respond with a full
table instead.
Fixes: e1bf0c1409 ("batman-adv: tvlv - convert tt data sent within OGMs")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Acked-by: Antonio Quartulli <Antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8038806db64da15721775d6b834990cacbfcf0b2 ]
The number of entries filled by batadv_tt_tvlv_generate() can be less
than initially expected in batadv_tt_prepare_tvlv_{global,local}_data()
(changes can be removed by batadv_tt_local_event() in ADD+DEL sequence
in the meantime as the lock held during the whole tvlv global/local data
generation).
Thus tvlv_len could be bigger than the actual TT entry size that need
to be sent so full table TT_RESPONSE could hold invalid TT entries such
as below.
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
Remove the extra allocated space to avoid sending uninitialized entries
for full table TT_RESPONSE in both batadv_send_other_tt_response() and
batadv_send_my_tt_response().
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2f7358c3890e7366cbcb7512b4bc8b4394b2d61 ]
The number of TT changes can be less than initially expected in
batadv_tt_tvlv_container_update() (changes can be removed by
batadv_tt_local_event() in ADD+DEL sequence between reading
tt_diff_entries_num and actually iterating the change list under lock).
Thus tt_diff_len could be bigger than the actual changes size that need
to be sent. Because batadv_send_my_tt_response sends the whole
packet, uninitialized data can be interpreted as TT changes on other
nodes leading to weird TT global entries on those nodes such as:
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
All of the above also applies to OGM tvlv container buffer's tvlv_len.
Remove the extra allocated space to avoid sending uninitialized TT
changes in batadv_send_my_tt_response() and batadv_v_ogm_send_softif().
Fixes: e1bf0c1409 ("batman-adv: tvlv - convert tt data sent within OGMs")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47f402a3e08113e0f5d8e1e6fcc197667a16022f ]
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 89fc548767a2155231128cb98726d6d2ea1256c9 upstream.
When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array
is allocated in __exfat_get_entry_set. The problem is that the bh-array is
allocated with GFP_KERNEL. It does not make sense. In the following cases,
a deadlock for sbi->s_lock between the two processes may occur.
CPU0 CPU1
---- ----
kswapd
balance_pgdat
lock(fs_reclaim)
exfat_iterate
lock(&sbi->s_lock)
exfat_readdir
exfat_get_uniname_from_ext_entry
exfat_get_dentry_set
__exfat_get_dentry_set
kmalloc_array
...
lock(fs_reclaim)
...
evict
exfat_evict_inode
lock(&sbi->s_lock)
To fix this, let's allocate bh-array with GFP_NOFS.
Fixes: a3ff29a95f ("exfat: support dynamic allocate bh for exfat_entry_set_cache")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: syzbot+412a392a2cd4a65e71db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000fef47e0618c0327f@google.com
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3ff29a95f upstream.
In special cases, a file or a directory may occupied more than 19
directory entries, pre-allocating 3 bh is not enough. Such as
- Support vendor secondary directory entry in the future.
- Since file directory entry is damaged, the SecondaryCount
field is bigger than 18.
So this commit supports dynamic allocation of bh.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24a9799aa8efecd0eb55a75e35f9d8e6400063aa upstream.
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ Michael Krause: Naive, manual merge because the 3rd hunk would not apply. ]
Signed-off-by: Michael Krause <mk-debian@galax.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75e072a390da9a22e7ae4a4e8434dfca5da499fb upstream.
Consider a sockmap entry being updated with the same socket:
osk = stab->sks[idx];
sock_map_add_link(psock, link, map, &stab->sks[idx]);
stab->sks[idx] = sk;
if (osk)
sock_map_unref(osk, &stab->sks[idx]);
Due to sock_map_unref(), which invokes sock_map_del_link(), all the
psock's links for stab->sks[idx] are torn:
list_for_each_entry_safe(link, tmp, &psock->link, list) {
if (link->link_raw == link_raw) {
...
list_del(&link->list);
sk_psock_free_link(link);
}
}
And that includes the new link sock_map_add_link() added just before
the unref.
This results in a sockmap holding a socket, but without the respective
link. This in turn means that close(sock) won't trigger the cleanup,
i.e. a closed socket will not be automatically removed from the sockmap.
Stop tearing the links when a matching link_raw is found.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-1-1e88579e7bd5@rbox.co
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
