[ Upstream commit cb7b7ae53b557d168b4af5cd8549f3eff920bfb5 ]
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 6 which
is already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 6 display clock.
Fixes: 8cd61c313d ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684 ("drm/amd/display: make clk mgr soc specific")
Fixes: 3ecb3b794e ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408)
Cc: stable@vger.kernel.org
[ `MIN` => `min` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45eae113dccaf8e502090ecf5b3d9e9b805add6f upstream.
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
Cc: stable <stable@kernel.org>
Co-developed-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58577118cc7cec9eb7c1836bf88f865ff2c5e3a3 upstream.
During a device-initiated disconnect, the End Transfer command resets
the event filter, allowing a new xferNotReady event to be generated
before the controller is fully halted. Processing this late event
incorrectly triggers a Start Transfer, which prevents the controller
from halting and results in a DSTS.DEVCTLHLT bit polling timeout.
Ignore the late xferNotReady event if the controller is already in a
disconnected state.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250807090700.2397190-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9420f4757752f056144896024d5ea89e5a611f1 upstream.
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
[1] https://www.macronix.com/Lists/Datasheet/Attachments/8634/MX25L5121E,%203V,%20512Kb,%20v1.3.pdf
[2] https://www.macronix.com/Lists/Datasheet/Attachments/8750/MX25V5126F,%202.5V,%20512Kb,%20v1.1.pdf
Fixes: 2478be82de ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250802225526.25431-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fe06185e11ae753414aa6117f0e798aa77567ff upstream.
The USB core will unmap urb->transfer_dma after SETUP stage completes.
Then the USB controller will access unmapped memory when it received
device descriptor. If iommu is equipped, the entire test can't be
completed due to the memory accessing is blocked.
Fix it by calling map_urb_for_dma() again for IN stage. To reduce
redundant map for urb->transfer_buffer, this will also set
URB_NO_TRANSFER_DMA_MAP flag before first map_urb_for_dma() to skip
dma map for urb->transfer_buffer and clear URB_NO_TRANSFER_DMA_MAP
flag before second map_urb_for_dma().
Fixes: 216e0e563d ("usb: core: hcd: use map_urb_for_dma for single step set feature urb")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806083955.3325299-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cd212e895ca2d58963fdc6422502b10dd3966bb upstream.
syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel
buffer is allocated to hold `insn->n` samples (each of which is an
`unsigned int`). For some instruction types, `insn->n` samples are
copied back to user-space, unless an error code is being returned. The
problem is that not all the instruction handlers that need to return
data to userspace fill in the whole `insn->n` samples, so that there is
an information leak. There is a similar syzbot report for
`do_insnlist_ioctl()`, although it does not have a reproducer for it at
the time of writing.
One culprit is `insn_rw_emulate_bits()` which is used as the handler for
`INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have
a specific handler for that instruction, but do have an `INSN_BITS`
handler. For `INSN_READ` it only fills in at most 1 sample, so if
`insn->n` is greater than 1, the remaining `insn->n - 1` samples copied
to userspace will be uninitialized kernel data.
Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It
never returns an error, even if it fails to fill the buffer.
Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure
that uninitialized parts of the allocated buffer are zeroed before
handling each instruction.
Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix
replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not
always necessary to clear the whole buffer.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Reported-by: syzbot+a5e45f768aab5892da5d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5e45f768aab5892da5d
Reported-by: syzbot+fb4362a104d45ab09cf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fb4362a104d45ab09cf9
Cc: stable <stable@kernel.org> # 5.13+
Cc: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725125324.80276-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96cb948408b3adb69df7e451ba7da9d21f814d00 upstream.
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below.
Fixes: fff4620724 ("staging: comedi: pcl726: enable the interrupt support code")
Cc: stable <stable@kernel.org> # 5.13+
Reported-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5cd373521edd68bebcb3
Tested-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/tencent_3C66983CC1369E962436264A50759176BF09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7afba9221f70d4cbce0f417c558879cba0eb5e66 upstream.
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable <stable@kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 300a0cfe9f375b2843bcb331bcfa7503475ef5dd upstream.
In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of
the source string (excluding the NUL terminator) rather than the size of
the destination buffer. This results in one character less being copied
from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'.
Use the destination buffer size instead to ensure the name is copied
correctly.
Cc: stable <stable@kernel.org>
Fixes: 2a226927d9 ("cdx: add rpmsg communication channel for CDX")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250806090512.121260-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f ]
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 779b1a1cb13ae17028aeddb2fbbdba97357a1e15 ]
Occasionally, the exit latency of the idle state selected by the menu
governor may exceed the PM QoS CPU wakeup latency limit. Namely, if the
scheduler tick has been stopped already and predicted_ns is greater than
the tick period length, the governor may return an idle state whose exit
latency exceeds latency_req because that decision is made before
checking the current idle state's exit latency.
For instance, say that there are 3 idle states, 0, 1, and 2. For idle
states 0 and 1, the exit latency is equal to the target residency and
the values are 0 and 5 us, respectively. State 2 is deeper and has the
exit latency and target residency of 200 us and 2 ms (which is greater
than the tick period length), respectively.
Say that predicted_ns is equal to TICK_NSEC and the PM QoS latency
limit is 20 us. After the first two iterations of the main loop in
menu_select(), idx becomes 1 and in the third iteration of it the target
residency of the current state (state 2) is greater than predicted_ns.
State 2 is not a polling one and predicted_ns is not less than TICK_NSEC,
so the check on whether or not the tick has been stopped is done. Say
that the tick has been stopped already and there are no imminent timers
(that is, delta_tick is greater than the target residency of state 2).
In that case, idx becomes 2 and it is returned immediately, but the exit
latency of state 2 exceeds the latency limit.
Address this issue by modifying the code to compare the exit latency of
the current idle state (idle state i) with the latency limit before
comparing its target residency with predicted_ns, which allows one
more exit_latency_ns check that becomes redundant to be dropped.
However, after the above change, latency_req cannot take the predicted_ns
value any more, which takes place after commit 38f83090f515 ("cpuidle:
menu: Remove iowait influence"), because it may cause a polling state
to be returned prematurely.
In the context of the previous example say that predicted_ns is 3000 and
the PM QoS latency limit is still 20 us. Additionally, say that idle
state 0 is a polling one. Moving the exit_latency_ns check before the
target_residency_ns one causes the loop to terminate in the second
iteration, before the target_residency_ns check, so idle state 0 will be
returned even though previously state 1 would be returned if there were
no imminent timers.
For this reason, remove the assignment of the predicted_ns value to
latency_req from the code.
Fixes: 5ef499cd57 ("cpuidle: menu: Handle stopped tick more aggressively")
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5043159.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38f83090f515b4b5d59382dfada1e7457f19aa47 ]
Remove CPU iowaiters influence on idle state selection.
Remove the menu notion of performance multiplier which increased with
the number of tasks that went to iowait sleep on this CPU and haven't
woken up yet.
Relying on iowait for cpuidle is problematic for a few reasons:
1. There is no guarantee that an iowaiting task will wake up on the
same CPU.
2. The task being in iowait says nothing about the idle duration, we
could be selecting shallower states for a long time.
3. The task being in iowait doesn't always imply a performance hit
with increased latency.
4. If there is such a performance hit, the number of iowaiting tasks
doesn't directly correlate.
5. The definition of iowait altogether is vague at best, it is
sprinkled across kernel code.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20240905092645.2885200-2-christian.loehle@arm.com
[ rjw: Minor edits in the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 779b1a1cb13a ("cpuidle: governors: menu: Avoid selecting states with too much latency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 951b7ccc54591ba48755b5e0c7fc8b9623a64640 ]
015c9cbcf0ad ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.
Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.
This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: dec8b38be4b3 ("mmc: sdhci-pci-gli: Add a new function to simplify the code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 452690be7de2f91cc0de68cb9e95252875b33503 upstream.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.sh, because some refactoring have been done
later on: commit 3188309c8ceb ("selftests: mptcp: netlink:
add 'limits' helpers") and commit c99d57d0007a ("selftests: mptcp: use
pm_nl endpoint ops") are not in this version. The same operation can
still be done at the same place, without using the new helper. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ce0714623cffd00bf2a83e890d09c609b7f50a upstream.
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Before commit e4c28e3d5c09 ("mptcp: pm: move generic PM helpers to
pm.c"), mptcp_pm_alloc_anno_list() was in pm_netlink.c. The same patch
can be applied there without conflicts. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d13349472ac8abcbcb94407969aa0fdc2e1f1be upstream.
sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list.
Simplify the code by using a 'goto' statement to eliminate the
duplication.
Note that this is not a fix, but it will help backporting the following
patch. The same "Fixes" tag has been added for this reason.
Fixes: 93f323b9cc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Before commit e4c28e3d5c09 ("mptcp: pm: move generic PM helpers to
pm.c"), mptcp_pm_alloc_anno_list() was in pm_netlink.c. The same patch
can be applied there without conflicts. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cffd0441872e7f6b1fce5e78fb1c99187a291330 ]
do_change_type() and do_set_group() are operating on different
aspects of the same thing - propagation graph. The latter
asks for mounts involved to be mounted in namespace(s) the caller
has CAP_SYS_ADMIN for. The former is a mess - originally it
didn't even check that mount *is* mounted. That got fixed,
but the resulting check turns out to be too strict for userland -
in effect, we check that mount is in our namespace, having already
checked that we have CAP_SYS_ADMIN there.
What we really need (in both cases) is
* only touch mounts that are mounted. That's a must-have
constraint - data corruption happens if it get violated.
* don't allow to mess with a namespace unless you already
have enough permissions to do so (i.e. CAP_SYS_ADMIN in its userns).
That's an equivalent of what do_set_group() does; let's extract that
into a helper (may_change_propagation()) and use it in both
do_set_group() and do_change_type().
Fixes: 12f147ddd6de "do_change_type(): refuse to operate on unmounted/not ours mounts"
Acked-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7375f22495e7cd1c5b3b5af9dcc4f6dffe34ce49 ]
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2326fd14a224e4cccbab89e14c52279ff79b7ec ]
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 01aad16c2257ab8ff33b152b972c9f2e1af47912 ]
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write.
Fixes: 55f4b1f736 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250707-ufs-exynos-shift-v1-1-1418e161ae40@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ Adapted context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2e6ea70690ddd1ffa422423fd0d4523e4dfe4b62 ]
According to Documentation/PCI/endpoint/pci-endpoint-cfs.rst, the Endpoint
controller (EPC) should only start the link when userspace writes '1' to
the '/sys/kernel/config/pci_ep/controllers/<EPC>/start' attribute, which
ultimately results in calling imx_pcie_start_link() via
pci_epc_start_store().
To align with the documented behavior, do not start the link automatically
when adding the EP controller.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250709033722.2924372-3-hongxing.zhu@nxp.com
[ imx_pcie_ltssm_enable() => imx6_pcie_ltssm_enable() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 669f73a26f6112eedbadac53a2f2707ac6d0b9c8 upstream.
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 297a4833a68aac3316eb808b4123eb016ef242d7 upstream.
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10507478468f165ea681605d133991ed05cdff62 upstream.
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 430fa71027b6ac9bb0ce5532b8d0676777d4219a upstream.
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation.
Fixes: ada1da31ce ("s390/sclp: sort out physical vs virtual pointers usage")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e6053fea379806269c4f7f5e36b523c9c0fb35c upstream.
When memory_failure() is called for a already hwpoisoned pfn,
kill_accessing_process() will be called to kill current task. However, if
the vma of the accessing vaddr is VM_PFNMAP, walk_page_range() will skip
the vma in walk_page_test() and return 0.
Before commit aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes
with recovered clean pages"), kill_accessing_process() will return EFAULT.
For x86, the current task will be killed in kill_me_maybe().
However, after this commit, kill_accessing_process() simplies return 0,
that means UCE is handled properly, but it doesn't actually. In such
case, the user task will trigger UCE infinitely.
To fix it, add .test_walk callback for hwpoison_walk_ops to scan all vmas.
Link: https://lkml.kernel.org/r/20250815073209.1984582-1-tujinjiang@huawei.com
Fixes: aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes with recovered clean pages")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dde30854bddfb5d69f30022b53c5955a41088b33 upstream.
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_struct is initialized again etc., however, if
it ends up using the same pgd table, it bumps into the old stale entry
when clearing/freeing the page table entries, so it tries to free an entry
already gone (that one which was allocated by the debug_vm_pgtable test),
which also explains the negative pgtables_bytes since it's accounting for
not allocated entries in the current process.
As far as I looked pgd_{alloc,free} etc. does not clear entries, and
clearing of the entries is explicitly done in the free_pgtables->
free_pgd_range->free_p4d_range->free_pud_range->free_pmd_range->
free_pte_range path. However, the debug_vm_pgtable test does not call
free_pgtables, since it allocates mm_struct and entries manually for its
test and eg. not goes through page faults. So it also should clear
manually the entries before exit at destroy_args().
This problem was noticed on a reboot X number of times test being done on
a powerpc host, with a debug kernel with CONFIG_DEBUG_VM_PGTABLE enabled.
Depends on the system, but on a 100 times reboot loop the problem could
manifest once or twice, if a process ends up getting the right mm->pgd
entry with the stale entries used by mm/debug_vm_pagetable. After using
this patch, I couldn't reproduce/experience the problems anymore. I was
able to reproduce the problem as well on latest upstream kernel (6.16).
I also modified destroy_args() to use mmput() instead of mmdrop(), there
is no reason to hold mm_users reference and not release the mm_struct
entirely, and in the output above with my debugging prints I already had
patched it to use mmput, it did not fix the problem, but helped in the
debugging as well.
Link: https://lkml.kernel.org/r/20250731214051.4115182-1-herton@redhat.com
Fixes: 3c9b84f044 ("mm/debug_vm_pgtable: introduce struct pgtable_debug_args")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
