77 lines
2.4 KiB
Markdown
77 lines
2.4 KiB
Markdown
# Settings
|
|
|
|
> **Warning**
|
|
> Wi-Fi and IP related settings will restart the Wi-Fi service.
|
|
> After applying the settings, you may need to reconnect to the page.
|
|
>
|
|
> Please be careful when applying settings. Incorrect settings may prevent you from connecting to the device.
|
|
> If you have problems with the device settings, connect the debug USB-C connector to check the device's logs.
|
|
> If necessary, you can re-update the firmware to initialize the device.
|
|
|
|
## Connect to Wi-Fi
|
|
|
|
The device boots in APSTA mode by default and services the following AP.
|
|
|
|
- SSID: powermate
|
|
- Password: hardkernel
|
|
|
|
After connecting to the above AP using a smartphone, etc., you can configure the device by accessing the
|
|
`http://192.168.4.1` address.
|
|
|
|
> **Warning**
|
|
> A warning that the AP does not have internet may appear. Please press `Allow connection` to connect to the device.
|
|
|
|
You can open the settings window by pressing the gear button at the top.
|
|
Press the Scan button to see a list of nearby APs.
|
|
|
|
<img src="img/1000030234.jpg" width="300">
|
|
|
|
After entering the password, press the Connect button and PowerMate will attempt to connect to the AP.
|
|
For public APs, leave the Password blank.
|
|
|
|
<img src="img/1000030235.jpg" width="300">
|
|
|
|
|
|
|
|
<img src="img/1000030236.jpg" width="300">
|
|
|
|
When Wi-Fi is connected, the green SSID name appears at the top of the page.
|
|
|
|
<img src="img/1000030237.jpg" width="300">
|
|
|
|
## Set static ip
|
|
|
|
You can assign the IP of the device yourself.
|
|
You can set the IP directly by turning on the `Use Static IP` toggle in the `Network` tab.
|
|
|
|
|
|
|
|
## AP Mode
|
|
|
|
Configure the AP function of PowerMate.
|
|
|
|
If you do not need the AP service, it is recommended to disable it.
|
|
|
|
|
|
|
|
## Current Limit
|
|
|
|
Monitors the current of PowerMate, and if a value higher than the set current is detected, all load switches are turned
|
|
off.
|
|
|
|
|
|
|
|
## Device
|
|
|
|
Sets the UART Baudrate. Please match it with the baudrate of the connected ODROID.
|
|
|
|
| ODROID | Baud rate |
|
|
|------------------|----------------------------|
|
|
| ODROID-C4 | 115200 |
|
|
| ODROID-C5 | 921600 |
|
|
| ODROID-M1/M1S/M2 | 1500000 |
|
|
| ODROID-H3/4 | According to user settings |
|
|
|
|
You can reboot the PowerMate. The state of the load switch does not change due to rebooting.
|
|
|
|
 |