The key_type is only a letter, if we use and `int` and then cast it to
(const char *) we will end up with a 0 value on big endian.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
We should not end up with an infinite loop here.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
(cherry picked from commit accbc91a86)
The test failed on Fedora Koji and openSUSE Build Service on i686 only. Probably
the rekey on the server needs longer here to collect enough entropy. So we need
to try harder before we stop :-)
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit b3b3fbfa1d)
This wont create a new process but replace the shell.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit bd2db30174)
The ncat tool from nmap is available on all unix platforms. The nc
binary might link to ncat or something else. Settle on one we know
also the options can be used if needed.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 6268417ac6)
error: ‘%u’ directive output may be truncated writing between 1 and 10
bytes into a region of size 6.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 20406e51c9)
mingw does have this function, even though it appears to be deprecated.
So the symbol has to have a different name, or linking becomes
impossible.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 17aec429f5)
The old version is missing the EVP_PKEY_up_ref(), which is needed to keep track
of the EVP_PKEY references.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
(cherry picked from commit 6e2648af6b)
what we set in open funtion by the argument mode. The mode of the created file
is (mode & ~umask), So we set umask to typical default value(octal 022).
Signed-off-by: renmingshuai <renmingshuai@huawei.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
(cherry picked from commit 1286a70e13)
This also allows testing mbedtls with the PKCS8 PEM files
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
(cherry picked from commit 66be590657)
The external ed25519 requires also the sha512 functions to work.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
(cherry picked from commit c09b02c573)
The curve25519 depends on ssh_get_random, which is normally built into libssh.
For the external override tests to build, we need to have them in separate
source file that can be included for this test.
For some reason, this did not happen on CI builds, but it did happen in koji
during RPM builds.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
(cherry picked from commit 0da54f2908)
The KDF was changed in the new API, fetching the algorithm first
then creating the context using it.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 9a4c5203af)
The new API does not provide EVP_KDF_CTX_new_id function, insted
it works with EVP_KDF_CTX_new and fetching the algorithm.
Adding a check for both to make it work with the new API too.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 8343a43edc)
EVP_PKEY_dup can't be used with ENGINE generated keys and
the key can't be freed because it is passing the main key
from the struct.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Rawhide has openssl 3.0 support which can test the new changes.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
New openssl API, libmbedtls, libgcrypt use size_t for
HMAC len pameter.
New helper functions were added in libcrypto.c to avoid
code duplication. (the header pki.h is needed for this
reason)
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
- strerror_r for linux
- strerror_s for windows
Keep in mind that strerror_r has two versions:
- XSI
- GNU
see manpage for more information
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The tests are compiled without -D_GNU_SOURCE, therefore
the XSI version of strerror_r is used. Defining
_GNU_SOURCE in torture.h then including *.c gives error
because it is assuming GNU version of strerror_r in
the source file.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Fix#98 by adding 'ssh_session_set_disconnect_message' Whenever the ssh
session disconnects a "Bye Bye" message was set and displayed. Now the
peer has a choice to set a customised message to be sent after the
session is disconnected. The default "Bye Bye" will be set if this
function is not called or not called correctly. The testcases in
tests/server/torture_server can also demonstrate how this function
works.
Signed-off-by: Om Sheladia <omsheladia10@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This commit adds an `agent_socket` field to the session options
and connects the config parser to that option.
`SSH_OPTIONS_IDENTITY_AGENT` is added to allow applications to
set this option for themselves.
agent.c is updated to take the `agent_socket` value in preference
to the `SSH_AUTH_SOCK` environment variable.
Signed-off-by: Wez Furlong <wez@fb.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Windows has supported unix domain sockets for a couple of years
now; see this article for more information about that:
<https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/>
This commit allows libssh to consider using agent authentication
on Windows systems.
It is mostly removing `#ifndef _WIN32` that prevented the unix
domain socket code from being compiled in, and adjusting the use
of `read(2)` and `write(2)` to `recv(2)` and `send(2)`, as the former
functions are not compatible with sockets on Windows systems.
For mingw systems, afunix.h isn't available so we use the
technique as was used to resolve building with mingw as used
by the curl project in: https://github.com/curl/curl/pull/5170
Signed-off-by: Wez Furlong <wez@fb.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
According to the documentation the return value is the number of
processed bytes, so the returned value is never negative. We should not
use ssize_t in public headers as it isn't available on Windows! We only
have it defined in priv.h!
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Contaminated errno can happen before strtoul call, thereofore
cleaning it before the call.
The errno is not used for checking later in code if fail happens,
therefore cleaning it right after error.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
also remove anything mentioning limitation to SSHv2 as it is the only
protocol supported these days.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The cmocka captures all signals so I was not able to reproduce the code
path. But leaving the code in for future readers.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added API function ssh_channel_open_forward_port that is the same as
ssh_channel_accept_forward with the addition to determine the
originator address and port
Signed-off-by: Tomas Holmqvist <tomhol@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The original key had 2018 bits, which falls short for current security
requirements
Steps I used:
$ ssh-keygen -f tests/keys/certauth/id_rsa -t rsa -b 2048 -C libssh_torture_auth -N ''
$ ssh-keygen -s tests/keys/user_ca -I torture_auth_carlos -n alice ./tests/keys/certauth/id_rsa.pub
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Remove config options: protocol, mac, cipher, compressionlevel,
gssapikeyexchange,
gssapirenewalforcesrekey,
gssapitrustdns,
rhostsrsaauthentication,
rsaauthentication,
useprivilegedport,
pubkeyacceptedtypes
since they are not supported by OpenSSH
Rename some config options:
hostbasedkeytypes, challengeresponseauthentication and pubkeyacceptedkeytypes
to hosbasedacceptedalgorithms, kdbinteractiveauthentication and pubkeyacceptedalgorithms
to be consistent with the OpenSSH manual https://man.openbsd.org/sshd_config.
Keep pubkeyacceptedkeytypes for backward compatibility.
Rename SOC_PUBKEYACCEPTEDTYPES to SOC_PUBKEYACCEPTEDKEYTYPES in config.h
Update unittests/torture_config.c and unittests/torture_options.c
Signed-off-by: Anh Minh Tran <anhminh@seznam.cz>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Use the POSIX strtok_r() or equivalent implementations to resolve.
Thanks to @wez1 for the early review.
Fixes#104
Signed-off-by: Gene Oden <goden@fb.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
FIPS_mode function is no longer supported in openssl version 3
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The libssh versions before this included files with relative path based
on the current working directory, which can result unexpected results
and is different from the OpenSSH include behavior. The manual page for
ssh_config lists:
> iles without absolute paths are assumed to be in ~/.ssh if included in
> a user configuration file or /etc/ssh if included from the system
> configuration file.
This is following the semantics as close as possible with a difference
that we do not use the hardcoded ~/.ssh for user configuration files,
but the path defined with SSH_OPTIONS_SSH_DIR, which is already used
to reference any other files in used home directory.
Fixes#93
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This fails if the gethostname() fails in a way that does not write the
buffer, but returns 0 as a success.
Fixes#106
Thanks oss-fuzz
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Sahana Prasad <sahana@redhat.com>
This prevents the usage of uninitialized value on error in the known
hosts hasing code if invalid (empty) hostname is used.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Sahana Prasad <sahana@redhat.com>
The adjacent question marks and asterisks can be simplified to single
wildcard so there is no need to excersise all the recursive pattern
matching.
These inputs were generated by oss-fuzz and probably caused also the
previously reported timeouts.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is more than enough as it reflects to 16 asterisks in the match
string is more than enough. With larger values oss-fuzz was generating
long match strings with asterisks interleaved with normal characters,
which were timing out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Currently Compression=no (the default) force-disables zlib algos, while
Compression=yes force-enables it. This means that mismatching options between
client and server lead to connection failure. This can easily happen if the
server has default settings but the client specifies Compression=yes.
OpenSSH treats the option as a "prefer compression" setting:
Compression=no -> none,zlib@openssh.com,zlib (default)
Compression=yes -> zlib@openssh.com,zlib,none
This commit changes the libssh behaviour to the same as OpenSSH.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
RFC 4252 §7 states that the public key algorithm in a
SSH_MSG_USERAUTH_PK_OK response is the public key algorithm name from
the request. When using RSA with SHA-2, this will be either
"rsa-sha2-256" or "rsa-sha2-512" as specified by RFC 8332 §3.2.
However, currently libssh emits the public key type instead, which is
"ssh-rsa". This is not in conformance with the RFCs, so let's fix this
by storing the signature type and emitting it in our response instead of
the public key when sending SSH_MSG_USERAUTH_PK_OK in the server.
Signed-off-by: brian m. carlson <bk2204@github.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Similarly as we already have for the client configuraiton file
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not compile tests which need SSHD_EXECUTABLE when
it is not available
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Calling some channel procedures on a freed channel is always resulting
in segmentation fault errors. The reason is that when a channel is
freed with 'ssh_channel_do_free' procedure, its 'session' field is set
to NULL; then when a channel procedure tries to access any field of
'channel->session' structure it is effectively dereferencing a NULL
pointer.
The change fixes that behavior by adding a check which ensures that a
channel state is not SSH_CHANNEL_FLAG_FREED_LOCAL before accessing its
parent session.
Also the test suite is updated to check for the fixed errors, and the
Doxygen documentation updated accordingly.
There was a bug introduced in b0fb7d15: 'ssh_channel_poll',
'ssh_channel_poll_timeout' and 'ssh_channel_get_exit_status' would
compare the channel state to the 'SSH_CHANNEL_FLAG_FREED_LOCAL'
constant to check if the channel is alive. But the procedures must
check the channel flags for the presence of
'SSH_CHANNEL_FLAG_FREED_LOCAL' bits instead. This change fixes the
bug.
Signed-off-by: Artyom V. Poptsov <poptsov.artyom@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
We do not use SHA1 as it is disabled in many systems
Verifies CVE-2021-3634
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Normally, the length of session_id and secret_hash is the same,
but if we will get into rekeying with a peer that changes preference
of key exchange algorithm, the new secret hash can be larger or
smaller than the previous session_id causing invalid reads or writes.
Resolves https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=35485
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
and add LOG_SIZE macro to control the buffer size
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I3eaeea001fc531fdb55074fc3a9d140b27847c1f
since ssh_scp_deny_request is seldom called, let's
utilize malloc to reserve the precise size memory.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I8e7a6d3153cff7691329b9487cd534a7f2887a35
to avoid allocate 4KB buffer from stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: Id144ff764ee1ae98f87aee36793a9f0e4fce21b7
so the same code base demo both multi-process and multi-thread model
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I98554a99b7a31586be37abde7c357f81a05c3d6e
to avoid allocate 16KB buffer from stack and one memory copy
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: Ib71cb5834b7810bf9791e13c58571e2b9fa5bca1
to avoid allocate 8KB buffer from stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: Ifc198705cb8ecec6f0a609f84965382dc151693b
to reduce the stack size requirement
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I6a91250524786af3358b0fd0f05ba8e45f76d278
to match the implemntation in packet_crypt.c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: Ib76c3585f67dae22ed0f1dfc10dadcd03c762032
to avoid their prototype different from ssh_cipher_struct
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I6cba2d4fea131f13d028226023da692494caa87d
We need a new one. Disable till set up and registered
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
enable pass username and password from command line
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I6404b90a99253d3240f7a28827635b159ff6a574
and free sources at the end of program
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: Ia6a51d52439722b46547449e85350b3193e5ba28
since not all POSIX platform support SIGWINCH signal
and remove the global variable chan
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I70217020c84b056270ed680008a1871383b5fc7b
This started failing CI on Fedora with new GCC
/builds/jjelen/libssh-mirror/src/external/ed25519.c:80:48: error: argument 1 of type 'unsigned char *' declared as a pointer [-Werror=array-parameter=]
80 | int crypto_sign_ed25519_keypair(unsigned char *pk,
| ~~~~~~~~~~~~~~~^~
In file included from /builds/jjelen/libssh-mirror/src/external/ed25519.c:15:
/builds/jjelen/libssh-mirror/include/libssh/ed25519.h:46:48: note: previously declared as an array 'uint8_t[32]' {aka 'unsigned char[32]'}
46 | int crypto_sign_ed25519_keypair(ed25519_pubkey pk, ed25519_privkey sk);
| ~~~~~~~~~~~~~~~^~
/builds/jjelen/libssh-mirror/src/external/ed25519.c:81:48: error: argument 2 of type 'unsigned char *' declared as a pointer [-Werror=array-parameter=]
81 | unsigned char *sk)
| ~~~~~~~~~~~~~~~^~
In file included from /builds/jjelen/libssh-mirror/src/external/ed25519.c:15:
/builds/jjelen/libssh-mirror/include/libssh/ed25519.h:46:68: note: previously declared as an array 'uint8_t[64]' {aka 'unsigned char[64]'}
46 | int crypto_sign_ed25519_keypair(ed25519_pubkey pk, ed25519_privkey sk);
| ~~~~~~~~~~~~~~~~^~
/builds/jjelen/libssh-mirror/src/external/ed25519.c:117:46: error: argument 5 of type 'const unsigned char *' declared as a pointer [-Werror=array-parameter=]
117 | const unsigned char *sk)
| ~~~~~~~~~~~~~~~~~~~~~^~
In file included from /builds/jjelen/libssh-mirror/src/external/ed25519.c:15:
/builds/jjelen/libssh-mirror/include/libssh/ed25519.h:61:27: note: previously declared as an array 'const uint8_t[64]' {aka 'const unsigned char[64]'}
61 | const ed25519_privkey sk);
| ~~~~~~~~~~~~~~~~~~~~~~^~
/builds/jjelen/libssh-mirror/src/external/ed25519.c:180:51: error: argument 5 of type 'const unsigned char *' declared as a pointer [-Werror=array-parameter=]
180 | const unsigned char *pk)
| ~~~~~~~~~~~~~~~~~~~~~^~
In file included from /builds/jjelen/libssh-mirror/src/external/ed25519.c:15:
/builds/jjelen/libssh-mirror/include/libssh/ed25519.h:76:26: note: previously declared as an array 'const uint8_t[32]' {aka 'const unsigned char[32]'}
76 | const ed25519_pubkey pk);
| ~~~~~~~~~~~~~~~~~~~~~^~
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Sahana Prasad <sahana@redhat.com>
to avoid their prototype different from ssh_cipher_struct
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Sahana Prasad <sahana@redhat.com>
Change-Id: I6cba2d4fea131f13d028226023da692494caa87d
to match the implemntation in packet_crypt.c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Sahana Prasad <sahana@redhat.com>
Change-Id: Ib76c3585f67dae22ed0f1dfc10dadcd03c762032
Currently "cmake -G Ninja" complains about "multiple rules generate
src/libssh_dev.map", because the target has the same name as the output
of the custom command.
Signed-off-by: DDoSolitary <DDoSolitary@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Due to the missing include, the compiler makes assumptions and leads to
a crash in ssh_mutex_lock() during runtime.
Signed-off-by: Chris Townsend <christopher.townsend@canonical.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Calling set_target_properties directly overrides previously set flags,
so replace them with target_compile_definitions and target_link_options.
Signed-off-by: DDoSolitary <DDoSolitary@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This adds a test to check if the internal implementation is not used
when it is not supposed to be used.
To be able to override functions using LD_PRELOAD, a shared version of
the torture library was added, as well as a shared library for each
of the algorithms implemented internally (ChaCha20, Poly1305,
curve25519, and ed25519).
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, the mbed TLS implementation wouldn't be use at all when
available, being the internal implementation always used instead.
This corrects few bugs and makes the mbed TLS implementation to be used
when ChaCha20 and Poly1305 are available.
This also makes the constant time comparison to be used when checking
the authentication tag.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When checking the authentication tag, use secure_memcmp() instead of
memcmp().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When comparing the authentication tag for chacha20-poly1305, use the
constant time CRYPTO_memcmp() instead of memcmp().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Move the secure_memcmp() function to a shared source to make it
available internally for other crypto implementations.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The test for delayed close asks for the execution of a command that
generates big output (larger than the default window) to make data to
remain in buffers while the close message arrives, triggering the
delayed channel closure.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
If the SSH2_MSG_CHANNEL_CLOSE was previously received, change the
channel state to SSH_STATE_CHANNEL_CLOSED in
ssh_channel_read_timeout() after reading all data available.
Fixes T31
Signed-off-by: Tom Deseyn <tom.deseyn@gmail.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
OpenSSL 1.0.1 has support for CTR & GCM modes so the checks here are no
longer needed. This allows for a bunch of additional cleanup of the old
code.
As for old MacOS versions etc, LibreSSL is a kind of compatibility layer
there but things already don't work anyway with that, so it doesn't
break anything that isn't already broken. OpenSSL is needed on MacOS
separately anyway (like installed with Homebrew).
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
CRYPTO_THREADID_set_callback is available since 1.0.1 which is the
oldest supported version. This means the check and compatibility code
can be removed.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Since OpenSSL 1.0.1 is the minimum version, this function is always
available so no compatibility check is needed anymore.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This can be implemented with the init directly when the context is
reused. When a new cipher context is allocated, no initialization call
is needed either so this moves the logic to one place as well.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Now that the minimum OpenSSL version is 1.0.1, we know that the EVP HMAC
API is always available. This switches to this API. The existing API is
deprecated for OpenSSL 3.0.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This fixes the formatting for src/libcrypto.c for the last bits where it
is not correct.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The HMAC_CTX_free function in the compat layer already handles this so
there's no need to add conditional logic to the code here.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This specific cleanup function describes better what happens here and is
available for older OpenSSL releases.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This isn't referenced anywhere outside of the compatibility layer so it
is unneeded.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The EVP_MD_CTX_reset function is not used anywhere outside of the compat
layer and is not needed there. The only usage in the compat layer is for
cleanup, but EVP_MD_CTX_cleanup can be used for that which is availble
at least since OpenSSL 0.9.8.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Older OpenSSL version have a cleanup function that can be used here.
This removes a whole bunch of now no longer needed logic and custom
conditionals.
These functions have existed since 0.9.8 and can be used here.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This function is not needed, because in each case it is used, we follow
it up immediately with an initialization function call. This means that
the zeroing here is unneeded, since the initialization already
guarantees things end up in the right state.
It also swaps the reset call with a simpler init call, also because
reset is implemented as init with a return value that is always 1. That
means the more complex logic is not needed at all.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
EVP_MD_CTX_new / EVP_MD_CTX_free is the current recommended / documented
API. The other names are defined as aliases for backwards compatibility.
The other part here is that EVP_MD_CTX_init is not needed for a context
allocated with EVP_MD_CTX_new. Only for the compatibility path for older
OpenSSL is the init needed if the structure is allocated directly.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is now the minimum version, so check it in the CMake configuration.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
OpenSSL 0.9.7 is already not supported, so clean up the old legacy bits
for that as well.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This updates the minimum version requirement for OpenSSL in the
documentation to 1.0.1 and also updates the practical minimum CMake
version.
Why pick 1.0.1 as the minimum? Main reason is whatever is still out
there with long term support contracts etc. One of the oldest I could
find is Ubuntu 14.04 which still has paid extended support and is on
1.0.1.
Another reason that 1.0.1 is probably a good minimum is a bit more
involved. 1.0.1 is the first version to add TLS 1.2. Large parts of the
internet have TLS 1.2 as a minimum requirement. This means that systems
with OpenSSL older than 1.0.1 already can't access large parts of the
internet anyway, so not supporting the latest libssh there either is ok
I think.
Bumping minimum support also means things like the HMAC API can be moved
to the more recent EVP style APIs and things can be more easily made
compatible with the deprecated APIs in OpenSSL 3.0.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Another item identified during code review was cases where the return
value of ssh_list_new() was not properly checked and handled. This
updates all cases that were missing this to handle failure to allocate a
new list.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
These calls can fail and the return code should always be checked. These
issues were identified when code review called it out on new code. The
updates here are to existing code with no behavior changes to make
review simpler.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In https://gitlab.com/libssh/libssh-mirror/-/merge_requests/145#note_463232084
behavior in libssh was identified where it diverges from how for example
OpenSSH behaves. In OpenSSH if a request success of failure message is
received, apart from it being treated as a keepalive message, it is
ignored otherwise.
Libssh does handle the unexpected message and triggers an error
condition internally. This means that with the Dropbear behavior where
it replies to a hostkeys-00@openssh.com message even with a want_reply
= 0 (arguably a bug), libssh enters an error state.
This change makes the libssh behavior match OpenSSH to ignore these
messages. The spec is a bit unclear on whether Dropbear is buggy here or
not, but let's be liberal with the input accepted here in libssh.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
FindOpenSSL.cmake usually defines this synonym, but it doesn't on CMake < 3.16 when building on Windows outside of Cygwin.
Signed-off-by: Kevin Kane <kkane@microsoft.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The build currently breaks when attempting to link libssh.so using a statically-linked OpenSSL. -ldl and -lpthread are required when linking a binary with the static libcrypto.a. The OPENSSL_CRYPTO_LIBRARY does not include these dependencies when linking against static OpenSSL. OPENSSL_CRYPTO_LIBRARIES contains the correct dependencies in both static and shared configurations; -ldl and -lpthread are not required when linking against shared libcrypto.so.
This change changes all uses of OPENSSL_CRYPTO_LIBRARY to OPENSSL_CRYPTO_LIBRARIES to let the FindOpenSSL CMake module always provide the correct libraries at link time.
Signed-off-by: Kevin Kane <kkane@microsoft.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The build currently breaks when attempting to link libssh.so using a
statically-linked OpenSSL. -ldl and -lpthread are required when linking
a binary with the static libcrypto.a. The OPENSSL_CRYPTO_LIBRARY does
not include these dependencies when linking against static OpenSSL.
OPENSSL_CRYPTO_LIBRARIES contains the correct dependencies in both
static and shared configurations; -ldl and -lpthread are not required
when linking against shared libcrypto.so.
This change changes all uses of OPENSSL_CRYPTO_LIBRARY to
OPENSSL_CRYPTO_LIBRARIES to let the FindOpenSSL CMake module always
provide the correct libraries at link time.
Signed-off-by: Kevin Kane <kkane@microsoft.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
These are disabled in latest since Dropbear 2020.79, while
older do not support anything better than aes-ctr ciphers.
We should implement some dynamic algorithm detection for dropbear
too to increase test coverage.
https://bugs.libssh.org/T252
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
There's currently a bug in libssh that a handshake doesn't complete if
there is no overlap between HMAC methods, but when an AEAD cipher is
used.
In case of an AEAD cipher such as chacha20-poly1305 or aes256-gcm, the
HMAC algorithm that is being picked is not relevant. But the problem
here is that the HMAC still needs to have an overlap in the handshake,
even if it is not used afterwards.
This was found with a very strict server side configuration with libssh
where only AEAD ciphers and EtM HMAC modes are accepted. The client
tested against was dropbear.
Dropbear does have support for chacha20-poly1305 and AES GCM modes, but
no support for EtM HMAC modes. This meant that the libssh server in this
case rejected the dropbear client, even though it is perfectly able to
serve it since dropbear supports AEAD algorithms.
The fix implemented here updates the HMAC phase of the handshake to
handle this case. If it detects an AEAD cipher is used, it uses the HMAC
abbreviations for the method instead. This is the same name that is used
in other places as well. It matches the client to server and server to
client values, but it does depend on the order of things in the
ssh_kex_types_e enum, which I'm assuming here is ok since it's explicit.
I've looked at how to add a test for this, but I couldn't really find a
suitable place for it. I would love some tips if this is easily
possible, or if it's easier for someone else to contribute, that's of
course welcome too.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This adds an initial test with all AEAD modes to verify that they work
if there is no overlap in HMAC ciphers.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The “SubmittingPatches” file is no more since commit
a76badf77a, but the READMEs were still
referencing it.
They now correctly point to “CONTRIBUTING.md”.
Signed-off-by: Paul Capron <paul@fragara.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
There were two identical entries for v0.3.1, next to each other.
Signed-off-by: Paul Capron <paul@fragara.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
In function pki_signature_from_blob(), the warning message in case of
an oversized RSA key was missing an ‘o’ (reading “to” instead of “too”).
While we are here, make this oversized message the same than the ones
found in pki_crypto.c & pki_mbedcrypto.c: put the expected size in it.
The message in case of an _under_sized key include the expected size,
so that’s more consistent in that regard too (and more informative!)
Signed-off-by: Paul Capron <paul@fragara.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The preprocessor guard was previously effectively inoperative;
it used to read “MAX_PACKAT_LEN” (note the ‘A’!), now is ‘E’.
Signed-off-by: Paul Capron <paul@fragara.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Avoid calling random() and use ssh_get_random() instead.
CID #1412376
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
In 906cc7e7e9 a memory leak was fixed but
a similar one is present here that needs a fix as well.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Add a test case to verify that the server returns the correct signature
when it negotiated an RSA signature algorithm for the host key different
from the one it prefers (e.g. when the client prefers ssh-rsa over
rsa-sha2-256 and rsa-sha2-512).
Fixes T240
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test checks if the client can handle the error returned by the
server when the maximum number of channel sessions is exceeded.
Fixes T239
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
OpenSSH disabled them in 2014 and 2017 for servers and clients so its our
turn to follow the suit.
Fixes T236
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test might fail if there is a local configuration file that changes
the location of the known_hosts file. The test should not be affected
by configuration files present in the testing environment.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
If the server properly closed the channel, the client should not return
error if it finds the channel closed.
Fixes T231
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, the exec example would fail if it could not write the whole
read buffer to stdout. With this changes, the exec example will be able
to write parts of the buffer until the whole buffer is written.
This makes the exec example to run when the stdout buffer is small.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test checks if a command appended to the file path is not executed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Ramin Farajpour Cami for spotting this.
Fixes T232
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
They do not build anymore and I believe most of their functionality is already
covered by new testst.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh_pki_export_pubkey_blob() is incorrectly used to export ecdsa pubkeys from privkeys
when pubkeys are not imported into pkcs #11 tokens.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
determines if public keys must be loaded in pkcs #11 tokens or not.
tests: Adds the load_public parameter in all files where torture_setup_tokens() was used.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
private keys for ecdsa keys.
ssh_userauth_publickey() calls ssh_pki_export_pubkey_blob() and tries to export
the the public key from private key if public keys are not already imported
into pkcs #11 tokens.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Set the cmake project verision to the autogenerated file to have a single
point to set the version. This will be included in the libssh.h file.
Pair-Programmed-With: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
tests/fuzz/ssh_client_fuzzer.cpp:45:1: error: designator order for field ‘ssh_callbacks_struct::userdata’ does not match declaration order in ‘ssh_callbacks_struct’
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This option is unknown to older OpenSSH versions (for example CentOS 7
with OpenSSH 7.4) so we can not add it everywhere.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add SSH_AGAIN as return value to ssh_handle_packets documentation.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The introduction of stages in gitlab-ci had quite a unfortune side
effect that is described in the documentation [1]. The whole artifacts
path (in our case obj/) is passed from one stage to another by default,
which is causing very odd behavior as the previous results are only
partially overwritten by the new cmake command and can even lead to
execution of tests that are not supposed to run in particular job.
[1] https://docs.gitlab.com/ee/ci/yaml/#dependencies
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
The OpenSSH 7.4 or 7.6 in Ubuntu and CentOS 7 does not support SHA2
RSA certificates and libssh automatically falls back to SHA1, which
is not allowed by default.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Previously, it would use only the default set, which makes some tests failing
including the DSA ones and disabled RSA with SHA1.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
EVP_CIPHER_CTX_init was replaced with _reset.
Removed EVP_CIPHER_CTX_cleanup. The successive _free call handles that.
Removed old SSLeay function usage.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Added extra functions. The next commit will switch to them.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
All subsecond timestamps are only in the packets if both the
SUBSECOND_TIMES flag and the timestamp flag, e.g. ATTR_ACCESSTIME
are set.
SUBSECOND_TIMES are not very common across server implementations
(e.g. openssh does not include it, nor does libssh's sftpserver
implementation), but this interpretation of the SFTP protocol draft
is used by WinSCP and lftp.
Fixes T219.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
If the library is not initialized, SSH_ERROR is returned and the error
message is set properly.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The introduced function returns whether the library is initialized or
not.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When libssh is statically linked, it is necessary to explicitly call
ssh_init() before calling any other provided API. It is also necessary
to call ssh_finalize() before exiting to free allocated resources.
Fixes T222
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
fail_msg() is not expected to return. Mark the points after calling it
as unreachable to clarify this to the compiler.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Timeout will kill the server if it hangs.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use the function which starts the test server under timeout. This way
timeout will kill the server if it hangs.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The added function runs the test server under timeout program to kill it
if it elapses the default timeout of 5 minutes.
An auxiliary function to create a libssh server configuration file was
also added.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Using the added option it is possible to set a path to a file in which
the server will write its PID.
This can be used later to kill the server.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ignore the system-wide configuration when simply trying to reach the
host.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When a key is rejected, free the allocated memory before returning.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Verify the error code returned by kill() in torture_terminate_process().
The error code is raised when killing the process failed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The SFTP files wouldn't be closed during the rekey tests leading to
memory leak.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The temporary directory created in torture_sftp_session() wouldn't be
removed. This removes such directory in torture_sftp_close().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
In torture_reload_sshd_server(), instead of trying to use SIGHUP to
reload the configuration file, kill the original process and create a
new one with the new configuration. With this change, both
torture_setup_sshd_server() and torture_reload_sshd_server() need to
start sshd, with the only difference in the configuration setup. The
shared code to start the sshd server was moved to a new introduced
internal function torture_start_sshd_server().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This adds server-side support for the newly introduced OpenSSH
keytypes sk-ecdsa-sha2-nistp256@openssh.com and sk-ed25519@openssh.com
(including their corresponding certificates), which are backed
by U2F/FIDO2 tokens.
Change-Id: Ib73425c572601c3002be45974e6ea051f1d7efdc
Signed-off-by: Sebastian Kinne <skinne@google.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The obj directory is not created anymore when the git repository is
cloned. Create the directory during the build.
Also set the variable "ErrorActionPreference: STOP" to make the build to
fail if an error occurs.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The error was
src/options.c:971:13: warning: Value stored to 'u' is never read
# u = 0;
# ^ ~
src/options.c:971:13: note: Value stored to 'u' is never read
# u = 0;
# ^ ~
# 969| case SSH_OPTIONS_KBDINT_AUTH:
# 970| case SSH_OPTIONS_GSSAPI_AUTH:
# 971|-> u = 0;
# 972| if (value == NULL) {
# 973| ssh_set_error_invalid(session);
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
as nothing really sets these keys up and they are probably preserverd
from some previous test, which is really not a good testing strategy.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The static sshd directory wasn't matching the detected sshd and prevented the testcases to be run against local OpenSSH builts
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Imports private and public keys from the engine via PKCS11 URIs. Uses
the imported keys to authenticate to the ssh server.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Libgcrypt has supported ChaCha20 and Poly1305 since 1.7.0 version and
provides fast assembler implementations.
v3:
- initialize pointers to NULL
- use 'bool' for chacha20_poly1305_keysched.initialized
- pass error codes from libgcrypt calls to variable
- add SSH_LOG on error paths
v2:
- use braces for one-line blocks
- use UNUSED_PARAM/UNUSED_VAR instead of cast to void
- use calloc instead of malloc+memset
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
v3:
- add tests for malformed encrypted inputs
v2:
- use proper size key for chacha20poly1305
- make copy of cleartext for chacha20poly1305 test-case
- update chacha20_encrypted
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure that the `keylen` argument as provided to `EVP_PKEY_derive`
is initialized, otherwise depending on stack contents, the function
call may fail.
Fixes T205.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Test if the file name is correctly escaped to avoid protocol message
injection.
Fixes T189
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When pushing files or directories, encode the newlines contained in the
names as the string "\\n". This way the user cannot inject protocol
messages through the file name.
Fixes T189
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Given a string, the added function encodes existing newline characters
('\n') as the string "\\n" and puts into a given output buffer.
The output buffer must have at least 2 times the length of the input
string plus 1 for the terminating '\0'. In the worst case, each
character can be replaced by 2 characters.
Fixes T189
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is a public struct and the version should be unsigned there.
Fixes T188
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Those are not marked as LIBSSH_API so not part of the public API and the
symbols aren't exported!
Fixes T188
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Single quote file paths to be used on commands to be executed on remote
shell.
Fixes T181
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The added function quote file names strings to be used in a shell.
Special cases are treated for the charactes '\'' and '!'.
Fixes T181
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fixes T181
Previously, warnings received from the server were ignored. With this
change the warning message sent by the server will be logged.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, there was non-consistent usage of constans SSH_KEX_METHODS,
KEX_METHODS_SIZE and of magic number 10 to reference the arrays used
for algorithm negotiation by peers. This commit settles down to the single
constant and its usage throughout the whole codebase.
Fixes T195
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In ssh_session_new(), initialize the state machines states explicitly
for better readability.
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In ssh_message_new(), initialize msg->auth_request.signature_state
explicitly for better readability.
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In ssh_channel_new(), initialize channel->state and
channel->request_state explicitly for better readability.
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When a new ssh_auth_auto_state_struct is allocated in
ssh_userauth_publickey_auto(), initialize the state explicitly for
better readability.
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use the enum type instead of int in the ssh_session_struct
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use the enum type instead of char in the ssh_auth_request struct
Fixes T194
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Generally, when the extension negotiation is enabled and client supports
SHA2 algorithms for RSA, they are supposed to be prioritized against the
old SHA1. If it is not (ssh-rsa is listed in front of rsa-sha2-* hostkey
algorithms during negotiation), the server wrongly tries to provide the
new typo of signature, ignoring the negotiated algirithm
This commit propagates the digest algorithm from negotiation to the actual
signature functions, which were previously responsible for decision
about the hash algorithm based just on the negotiated extensions.
Fixes T191
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is only compiled for tests and fuzzers!
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
We will honor BUILD_SHARED_LIBS from cmake next.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
This is already part of LIBSSH_REQUIRED_LIBRARIES
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
It is possible for OpenSSL to have the type EVP_PKEY_ED25519 in
openssl/evp.h, but not the single shot functions EVP_DigestSign() and
EVP_DigestVerify() which are required to generate Ed25519 signatures.
Only switch to use OpenSSL Ed25519 implementation when OpenSSL have all
required types and functions.
Fixes: T197
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The added example is an application which can generate keys of different
types using libssh.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Debian removed the cross compiling toolchain. So lets drop it.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Do not parse global config file in sessions created by
torture_ssh_session().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This removes the tests which uses external configuration files. This
makes the tests no not change behaviour depending on the environment
they are being executed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In pkd tests, avoid processing the global server configuration file.
This is to allow testing with algorithms not allowed in the global
server configuration.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not process system-wide configuration when reinitializing a session
during testing. This could lead to different settings set from the
expected one (which was initialized during test setup).
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, the tests were sharing the same file path to create the
known_hosts file, which can create a race condition if the tests run in
parallel. Such file was deleted between tests.
By using different different files for each test, the risk of race
conditions is eliminated. Moreover, it makes unnecessary to destroy the
file between tests.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
These functions modify the provided pointer by advancing to the end of
if (point to the byte after the last written). This makes the pointer
invalid, making necessary to use a temporary variable.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The implementation does not work on Windows, where it still reports unsupported
configuration option. On windows, separate code invoking subprocess needs to be
implemented.
Fixes T169
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
This adds support for Ed25519 keys from files in PEM format when using
OpenSSL with Ed25519 support. The default encoding for the PEM file is
expected to be PKCS#8. Encrypted files are supported.
For the lack of an API, it is not possible to export keys in PEM format,
only in OpenSSH format.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
If supported, use OpenSSL X25519 implementation for the curve25519 key
exchange.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This removes unused function pki_signature_verify()
from pki_{crypto, mbedcrypto, gcrypt}. The function was also removed
from include/libssh/pki_priv.h. The function ssh_pki_signature_verify()
was changed to receive a const unsigned char *input.
All tests calling pki_signature_verify() were changed to call
ssh_pki_signature_verify() instead.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Use OpenSSL to generate and verify Ed25519 signatures, if supported.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is a preparation to use the Ed25519 implementation from OpenSSL.
The function pki_ed25519_sig_to_blob() was renamed to
pki_ed25519_signature_to_blob() and pki_ed25519_sig_from_blob() was
renamed to pki_signature_from_ed25519_blob() to follow the naming for
other algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Generate and verify Ed25519 signatures along with the other signature
types.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Verify the Ed25519 signature in pki_verify_data_signature() along with
the other signature types.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Use the newer APIs EVP_DigestSign{Init}() and EVP_DigestVerify{Init}()
to generate and verify signatures instead of the older EVP_Sign{Init,
Update, Final} and EVP_Verify{Init, Update, Final} if supported.
Also use the single shot signature/verification if supported as all the
input is provided at once.
This is a preparation to use Ed25519 implementation from OpenSSL.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is required to avoid csbuild scan failures when a commit removes
source files. The command prep is run only once before all the builds,
making csbuild to try to compile the old files using the configuration
files generated for the newest version.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
With the old token parser, the data was simply broken on the = sign even
if the uri was in quotes and ignored.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
> note that keywords are case-insensitive and arguments are case-sensitive
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
In torture_threads_pki_rsa, skip the test which generates 1024 bits RSA
key pair when in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, if the path to known_hosts file set through
SSH_OPTIONS_KNOWNHOSTS included missing directories,
ssh_session_update_known_hosts() would fail. The added test case checks
that this is not the case anymore.
The logic of checking if the directory is accessible before creating it
was replaced by creating the directory if opening the file failed. This
is to minimize the risk of TOCTOU race conditions.
Fixes: T166
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If the given path includes missing directories, ssh_mkdirs() tries to
create them recursively.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The introduced internal function checks if the provided path is for an
existing directory which is accessible for writing.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
For example "%d/config%%1" is expanded to "~/.ssh/config%1".
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Replace all occurrences of the deprecated function ssh_print_hexa() with
the introduced ssh_log_hexdump().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The introduced internal function is intended to be a replacement for the
deprecated function ssh_print_hexa().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Try to find the OpenSSH private key header not only at the beginning of
the file. This makes the parser to skip comments and white spaces.
Fixes: T76
Fixes: T123
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This should stop detecting it as dead code.
CID 1402934
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
LibreSSL does not support FIPS mode, check for FIPS_mode() in
ConfigureChecks.cmake.
Signed-off-by: Stefan Strogin <steils@gentoo.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, if the SSH_OPTIONS_HOSTKEYS option was set by any mean,
including the client configuration file, the keys in known_hosts files
wouldn't be considered before advertising the list of wanted host keys.
This could result in the client requesting the server to provide a
signature using a key not present in the known_hosts files (e.g. when
the first wanted algorithm in SSH_OPTIONS_HOSTKEYS is not present in the
known_hosts files), causing a host key mismatch and possible key
rejection.
Now, the keys present in the known_hosts files are prioritized over the
other wanted keys. This do not change the fact that only keys of types
present in the list set in SSH_OPTIONS_HOSTKEYS will be accepted and
prioritized following the order defined by such list.
The new wanted list of hostkeys is given by:
- The keys present in known_hosts files, ordered by preference defined
in SSH_OPTIONS_HOSTKEYS. If the option is not set, a default order
of preference is used.
- The other keys present in the same option are appended without adding
duplicates. If the option is not set, the default list of keys is
used.
Fixes: T156
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added internal function obtain a newly allocated string containing a
list of the signature types that can be generated by the keys present in
the known_hosts files, separated by commas.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Added a function to remove duplicates from lists. This function is used
in a new provided function to append lists removing duplicates.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Avoid trying to open the files if they are not accessible. This was
already treated as a non-error, but with this we save one function call.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Make sure known hosts check works when local known_hosts file is
unaccessible, but the host is present in global known_hosts file.
Remove double return value check in previous existing test.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The memory allocated for host_port can leak if the global knownhosts
file is unaccessible.
Found by address sanitizer build in CI.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Verify that the check process will not fail if the global known_hosts
file is not accessible and the local known_hosts file contain the host.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, if the global known_hosts file (default:
/etc/ssh/ssh_known_hosts) was inaccessible, the check for known hosts
failed. This makes the check to fail if both files are inaccessible.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The internal function ssh_connect_host() is not used.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In non-blocking mode, it is expected SSH_AGAIN to be returned many
times. Do not flood the log with error messages.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The tests were disabled because of failures in torture_auth. The server
tests are not enabled because the pkd tests are failing.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When we are talking to old OpenSSH versions which does not support
rsa-sha2-{256,512}-cert-v01@openssh.com or SHA2 in certificates,
fallback to old supported values.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This was introduced during fixes to run pkd tests in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The test checks if the server handles unknown global requests properly.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Added a test case where invalid global requests are sent to the server
which should reject them, but not stop working.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When the session is a client session, reject tcpip-forward requests.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When an unknown global request is received, consume the message to avoid
sending UNIMPLEMENTED later. Only report the failure if the request
wants a reply.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The OpenSSH in RHEL 8 in FIPS Mode outputs information about this on start
and it needs to be skipped for the version detection (and build) to pass:
$ ssh -V
FIPS mode initialized
OpenSSH_8.0p1, OpenSSL 1.1.1c FIPS 28 May 2019
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Use uint32_t when expecting 32 bits unsigned int. Use PRIu32 macro to
print correctly independently of the architecture.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not use long long as equivalent as int64_t.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Don't use long unsigned int as equivalent as uint32_t. Use macros to
correctly print the values independently of the architecture.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In torture_rekey_time(), "long long" was used instead of uint32_t. This
makes the test to fail in some architectures where the sizes don't match.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This also adds documentation for it.
Fixes T144
Signed-off-by: David Wedderwille <davidwe@posteo.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added a build running in a Fedora image with crypto-policies set as FIPS
and forcing OpenSSL FIPS mode through environment variable.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When running in FIPS mode, the OpenSSH version is not the first string
printed by "ssh -V". This makes the parser to find the first occurrence
of the version ignoring anything printed before it.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use ssh_kex_get_fips_methods() instead of ssh_get_default_methods() if
in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously the server in pkd tests would not accept certificates using
SHA2 in signatures.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use only allowed algorithms in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not use SHA1 in signatures in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Also systematically use assert_ssh_return_code() instead of various
checks for return codes.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Skip tests requiring algorithms not allowed in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use only allowed algorithms if running in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use only allowed algorithms if in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Skip tests using non allowed algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use only allowed algorithms if in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When running in FIPS mode, skip the tests using algorithms not allowed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use a different OpenSSH configuration if running in FIPS mode, which
contains only allowed algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, if the client supported rsa-sha2-256 or rsa-sha2-512, the
server would advertise the extensions as supported without checking its
own list of allowed algorithms. Now the server will only advertise
allowed signature algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Send only allowed algorithms in server-sig-algs extension if in FIPS
mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
There is actually a bug in OpenSSH's ssh-agent of handling these
requests [1], but this change follows the way how OpenSSH clients
behave in regards to the communication with agent.
Without this change, the agent is asked to provide SHA1 signature
with certificates, which is not right if we negotiated SHA2 extensions.
[1] https://bugzilla.mindrot.org/show_bug.cgi?id=3016
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If in FIPS mode, skip tests which require algorithms not allowed. Also
use allowed algorithms when possible to avoid skipping the test.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Copies of the DSA, RSA, and ECDSA keys were added encoded in PKCS#8
format. For now, these keys are only used when testing with OpenSSL.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Make ssh_fallback_group() to duplicate the modulus and generator.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The macro is defined for each crypto back end. If (*dest) is NULL, a
new bignum is allocated. Otherwise the value of orig is copied to
(*dest).
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
When in FIPS mode, filter the algorithms to enable only the allowed
ones. If any algorithm is explicitly set through options or
configuration file, they are kept.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows the use of the new PKCS#8 PEM files and does not
limit libssh to using only the "traditional" PEM files, that
are not default in OpenSSL since 1.0.0 and which do not work
at all in FIPS mode.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Since OpenSSL 1.0.0, the "traditional" PEM format was deprecated
in favor of the PKCS#8 PEM files which is more standardized,
more secure and does not depend on the MD5 hash, which is not
available for example in FIPS mode.
This requires using the new EVP_PKEY API for reading private key
blobs.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not use MD5 when generating fingerprints in FIPS mode. The call will
fail in such case. The test suite was updated with a negative test for
this case.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added a test to make sure unknown options in the configuration file are
ignored and don't make ssh_bind_options_parse_config() to fail.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Make ssh_bind_options_parse_config() to fail if setting a known option
fails. Previously the return value of ssh_bind_options_set() were
ignored when configuring the server through a configuration file.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, when no methods were set, the server would enable all
supported methods. This changes this behaviour by setting only the
default methods.
The server in pkd_daemon.c was changed to set explicitly all the
supported methods to keep the previous behaviour.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The default order of preference for signature algorithms were not
consistent. This makes the following order of preference to be the
default order:
* ssh-ed25519
* ecdsa-sha2-nistp521
* ecdsa-sha2-nistp384
* ecdsa-sha2-nistp256
* rsa-sha2-512
* rsa-sha2-256
* ssh-rsa
* ssh-dss
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added tests run the server with different combinations of algorithms
and try to connect using a client.
Note that few combinations are tested.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This allows testing the server with a configuration file. This also
adds an option for the stand-alone test server to skip parsing the
system-wide configuration file.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added option SSH_BIND_OPTIONS_PROCESS_CONFIG allows to skip
processing the system-wide configuration file. The global configuration
file is processed automatically if this option is not set as false.
This option will only be effective if set before any call to
ssh_bind_options_parse_config().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Add support for setting the allowed HostKey algorithms through
configuration file.
Note that this does NOT add support for adding or removing values using
'+' or '-'. Only replacing the whole list is supported.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added option SSH_BIND_OPTIONS_HOSTKEY_ALGORITHMS allows restricting
the signature algorithms to offer to the client for host authentication.
The list set is used as a filter of allowed algorithms.
First a list of possible signature algorithms to offer is created from
the keys set and then such list is filtered against the allowed
algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Add support for setting the accepted public key types through
configuration file.
Note that this does NOT add support for adding or removing values using
'+' or '-'. Only replacing the whole list is supported.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added option SSH_BIND_OPTIONS_PUBKEY_ACCEPTED_KEY_TYPES allows
restricting the allowed public key types accepted by the server for
authentication.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Replace the old tokens handling functions usage with the new implementation.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added functions allow splitting chains of tokens separated by a
given character (usually ','), and extracting matching parts between two
chains of tokens.
The previously existing functions in kex.c were replaced by the
introduced ones.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously when generating the signature in server side the key was
checked against the wrong list, potentially making the server to select
the wrong algorithm to sign (e.g. rsa-sha2-512 instead of rsa-sha2-256).
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This avoids csbuild failures due to new source files added. Previously
in some runs, csbuild would try to reuse the existing cmake cache file
which could contain added dependencies to new source files, leading to
failure in the run.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Do not print crypto debug information to reduce size of generated logs.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
They aren't needed and perhaps some compilers will issue "Unreachable
code" warnings.
Signed-off-by: Ramin Farajpour Cami <ramin.blackhat@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This makes sure the content will be zero after successful allocation.
Resolves T134
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When using OpenSSL, the bignums generated during group exchange are
duplicated and don't transfer the memory management responsibility to
the back-end. The original generated bignums can be freed.
The leak was detectable by running:
$ valgrind --leak-check=full ./tests/pkd/pkd_hello -i1 \
-t torture_pkd_openssh_rsa_rsa_diffie_hellman_group_exchange_sha256
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The added option is an alias for the previously existing option
PubkeyAcceptedTypes.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows the global client (ssh_session) configuration file path to
be set in configuration time by defining GLOBAL_CLIENT_CONFIG when
calling cmake. If it is not defined, the default path is set as
"/etc/ssh/ssh_config".
usage example:
$ cmake -DGLOBAL_CLIENT_CONFIG=/etc/my/custom/path ..
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not allow using SSH_DIGEST_AUTO for any algorithm other than
ed25519.
Do not allow using incompatible hash algorithms when signing or
verifying signatures.
Added negative tests for all combinations of signature and hash
algorithms.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously in the tests the private key structure would be used for
signature verification. Use the corresponding public key instead.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
pki_sign_data() uses the given private key and hash algorithm to sign
the data using the OpenSSL EVP interface. The corresponding function
pki_verify_data_signature() receives the signature, the signed data, and
the public key to verify the signature.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Store the raw signature instead of the internal backend structure.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Store the raw signature instead of the internal backend structure.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is a preparation to store the raw signature for all algorithms in
the same place in ssh_signature.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This makes pki_do_sign() and pki_signature_verify() to receive the
original input instead of the pre-calculated hash. The hash is then
calculated internally.
The hash to be used inside the signature is decided earlier, when all
the information about the signature to be generated/verified is
available.
Simplify ssh_pki_do_sign() and ssh_srv_pki_do_sign_sessionid().
The tests were modified to use pki_do_sign() instead of
pki_do_sign_hash().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The goal here is to avoid errors due to fall through when
HAVE_OPENSSL_ECC is not defined.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Refactor pki_signature_to_blob() without behaviour changes.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The goal of this change is to make pki_signature_from_*_blob()
consistent.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Remove duplicate code previously used only in server side to generate
signatures. Currently the code used to generate the signature is the
same for both client and server.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Refactor ssh_srv_pki_do_sign_sessionid() without behaviour changes.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added ECDSA key types to ssh_key_type_to_hash(). Refactor
ssh_pki_do_sign() without behaviour changes.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Upon SSH_OK, callers of `ssh_dh_keypair_set_keys` expect for ownership
of the `priv` and `pub` values to be transferred away and eventually
later managed by way of the `struct dh_ctx` at hand.
The mbedTLS and gcrypt builds transfer ownership of these values in
that way, but the libcrypto `ssh_dh_keypair_set_keys` is copying the
given values with `BN_dup`. This causes a memory leak that can be
seen with pkd and valgrind:
valgrind --leak-check=full \
./pkd_hello -i1 -t torture_pkd_openssh_dsa_rsa_diffie_hellman_group16_sha512
Fix the leak by replacing the `BN_dup` with direct assignment.
Now the bignums will eventually be freed via `ssh_dh_cleanup`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to free the `dh_ctx` member in `ssh_dh_cleanup` to match
the allocation in `ssh_dh_init_common`.
The before-and-after of this change can be observed with the pkd
tests and valgrind:
valgrind --leak-check=full \
./pkd_hello -i1 -t torture_pkd_openssh_dsa_rsa_diffie_hellman_group16_sha512
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix libssh server sending SSH_MSG_EXT_INFO messages upon rekey: clients
do not expect that message during rekey, and OpenSSH in particular will
log error messages along the lines of:
"kex protocol error: type 7 seq 15"
when the message is received during a rekey.
To fix, check against the session connected flag, which only transitions
to non-zero following the first successful authentication.
bf2c7128ab adds logic to resolve this
issue, but it turns out that checking the session_state to avoid
sending the message is insufficient, because that state is re-set
to SSH_SESSION_STATE_KEXINIT_RECEIVED during rekey.
The before-and-after effects of this change can be observed using the
pkd --rekey flag as so:
./pkd_hello -t torture_pkd_openssh_rsa_rsa_sha2_256 \
-i1 --rekey=16 -v -v -v 2>&1 |
grep -e 'KEY' -e 'EXT'
^ where before the change, multiple SSH_MSG_EXT_INFO send messages are
logged; after, there is only a single SSH_MSG_EXT_INFO logged once upon
the first initial key exchange.
Cross-reference: https://bugs.libssh.org/T121.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a bug with server-side rekeying where the session state at hand
has been toggled to SSH_SESSION_STATE_AUTHENTICATED before performing
the packet send of the SSH2_MSG_USERAUTH_SUCCESS message.
Before this change, what can happen is that during the packet send,
the SSH2_MSG_USERAUTH_SUCCESS message can end up being queued due
to a small rekey data limit value. libssh server will then proceed
to attempt to send KEX-related rekeying messages to the client before
the client has received USERAUTH_SUCCESS. OpenSSH clients do not
expect to undergo rekeying before having been authenticated, and so
will exit with error when this happens.
The behavior before and after can be observed with the pkd test making
use of its new --rekey flag:
./pkd_hello -t torture_pkd_openssh_rsa_rsa_default -i1 --rekey=16 -v -v -v
A new CMake test entry is added for the above variation and can be run
with:
ARGS="-R pkd_hello_rekey" make test
Before the fix, the test will fail; after, the test succeeds while
performing rekeying once every 16 bytes.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Log an SSH_LOG_PACKET debug message when rekeying is necessary due to
the cipher max_blocks configuration.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Support an optional --rekey input to set the SSH session rekey data
limit using SSH_OPTIONS_REKEY_DATA. This flag can be used together
with --buffer to test out server rekeying.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Support an optional --buffer input for the pkd tests to enable testing
with a larger payload than the default "hello\n".
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Move the pkd test payload buffer into the arguments struct, to make
way for parameterizing the payload using command-line options.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Summary:
* Note that SSH_ERROR can be returned on error in `ssh_channel_get_exit_status`
and `ssh_channel_get_session`.
* Note the return codes for `channel_open` and `grow_window`; although these
are internal APIs, it's best to document their behavior.
* Replace `@returns` use with `@return`. While Doxygen supports the
former as a synonym for `@return`, it isn't documented in the manual
(and might not be supported by other downstream documentation tools).
Signed-off-by: Enji Cooper <yaneurabeya@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Test Plan: n/a
Reviewers: #libssh, asn
Differential Revision: https://bugs.libssh.org/D15
A number of places checked that the signature type matched the key type. We
losen these checks to, for example, allow an RSA signature with an RSA-cert
key.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, we were just storing the raw certificate in ssh_key->cert. With
this change, we parse out the nonce string at the beginning of the certificate.
This leaves us with the certificate's public key at the start of the buffer.
The existing public key parsing code can then parse this out into the key fieds
of the ssh_key.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
These tests are copied from the existing RSA/DSA certificate tests. They cover
importing certificates.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
As with RSA/DSS, support is still quite limited. This is mostly about adding
new ssh_keytypes_e values and updating sites that check keys' types.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This type is imprecise. We often need the ecdsa_nid in addition to the key type
in order to do anything. We replace this singluar ECDSA type with one type per
curve.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Tests were failing to build on macOS with OpenSS installed using homebrew.
Signed-off-by: Ben Toews <mastahyeti@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
In preparation for adding crypto-libraries specific backends.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In preparation for deferring computation on DH secret material to
crypto library specific backends
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Rename and refactor how some variables are held in ssh_crypto_struct.
Refactor allocation of dh exchange public keys.
This is in preparation for switching the code to use openssl native DH
handling and allowed to better reason about the code and the overall API.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Adds test cases for the Match keyword for the bind options configuration
using a file.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Only "Match All" is supported, if any other criterion is used, the block
is ignored and the options are not applied.
It is important to note that only a subset of the supported keywords are
allowed to be used inside a Match block, currently being "LogLevel" the
only supported keyword.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Apply the global bind configuration from the file pointed by
BIND_GLOBAL_CONFIG when a bind_new() is called.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows the global bind configuration file path to be set in
configuration time by defining the GLOBAL_BIND_CONFIG when calling
cmake. If no value is defined, the default path is set as
"/etc/ssh/libssh_server_config".
usage example:
$ cmake -DGLOBAL_BIND_CONFIG=/etc/my/custom/path ..
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds the SSH_BIND_OPTIONS_CONFIG_DIR which allows to set the
directory used to expand the escape character "%d" when passing a path
to ssh_bind_options_parse_file().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The added API allows setting the options of a given bind context through
a configuration file. The default global configuration file
"/etc/ssh/libssh_server_config" is parsed before the provided
configuration file, if it hasn't been parsed yet.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Introduced the support to set options for a given ssh_bind through a
configuration file.
For options set more than once in a single file (or by files included in it
recursively) the first value set will be kept.
Differently from the session options configuration,
if an option previously set in one configuration file is redefined in a
later processed file, the latest will be kept.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This will allow the moved functions to be used in the server side
configuration parser implementation.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This will make such buffer to be explicity overwritten with zeroes when
freed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Addressing
client.c: In function ‘authenticate_pubkey’:
client.c:70:8: error: too few arguments to function ‘ssh_userauth_publickey_auto’
rc = ssh_userauth_publickey_auto(session, NULL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from client.c:1:
/usr/include/libssh/libssh.h:745:16: note: declared here
LIBSSH_API int ssh_userauth_publickey_auto(ssh_session session,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Pazdziora <jpazdziora@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Cleanup the KDF function to use only one function per crypto backend.
Improve the KDF function to properly handle requested lenght and to
avoid unnecessarily reallocating buffers.
In OpenSSL use the new EVP_KDF API if available.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This patch simply reworks the code to make it more understandable and
reduce if() branches.
It also avoids reallocs, and instead uses a support buffer to hold
intermediate results of the hmac function so that no buffer overrides
happen when the requested size is not an exact mutiple of the digest_len.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The zeroing MUST use the correct cipher length as keys can be both
longer or shorter than the digest. In one case only some part of the key
may end up being zeroed, in the other memory corruption may happen as
we zero memory we do not own.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds the OpenSSH HMACs that do encrypt then mac. This is a more
secure mode than the original HMAC. Newer AEAD ciphers like chacha20 and
AES-GCM are already encrypt-then-mac, but this also adds it for older
legacy clients that don't support those ciphers yet.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This adds a flag to the type structures to track if we use a
Encrypt-then-MAC cipher instead of Encrypt-and-MAC. EtM is a more secure
hashing mechanism.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This will make it easier to do Encrypt-then-MAC checks as those will be
on the direct encrypted data received before decrypting which means they
are not allocated in an ssh buffer at that point yet.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is not supported by OpenSSH and not recommended to be implemented
either.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
src/pki_gcrypt.c:485:10: error: assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]
Fixes T132
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Buffer (un)packing was broken on compilers that are not
gcc-compatible since the checks for an argument count of
-1 have been removed from ssh_buffer_(un)pack(). This
fix no longer uses GCC extensions for the __VA_NARG__
macro, but only plain C99.
Note: The macro can no longer count empty argument lists
(results in compile error) which was not needed anyway.
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Ensure to honor the client preference ordering when enabling one of
the RFC8332 RSA signature extensions (`rsa-sha2-{256,512}`).
Before this change, libssh unconditionally selects the `rsa-sha2-512`
algorithm for clients which may have offered "rsa-sha2-256,rsa-sha2-512".
The change can be observed before-and-after with the pkd tests:
./pkd_hello -t torture_pkd_openssh_rsa_rsa_sha2_256_512
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add four passes to the pkd tests to exercise codepaths where an
OpenSSH client requests these HostKeyAlgorithms combinations:
* rsa-sha2-256
* rsa-sha2-512
* rsa-sha2-256,rsa-sha2-512
* rsa-sha2-512,rsa-sha2-256
The tests demonstrate that the third combination currently fails:
libssh ends up choosing `rsa-sha2-512` instead of `rsa-sha2-256`,
and the initial exchange fails on the client side citing a signature
failure.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
OpenSSH has a block size of 8 so we need to always add padding.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In 3341f49a49, some direct assignments
to OpenSSL structures was replaced with usage of getter and setter
macros. Ensure to `bignum_safe_free` a couple of intermediate values
in error paths for `pki_signature_from_blob` DSS and ECDSA cases.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Check for a potential NULL result from `pki_signature_from_rsa_blob`
in `pki_signature_from_blob`. Otherwise the following `sig->type_c`
will result in a segfault.
Introduced in 7f83a1efae.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Harden the error path in 'ssh_dh_init_common' such that
all potential allocations are free'd upon exit.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to `SSH_STRING_FREE` the pubkey_blob local in
`ssh_server_dh_process_init`. The leak can be seen with
valgrind and the pkd tests with:
valgrind \
--leak-check=full \
--show-leak-kinds=definite \
./pkd_hello -i1 -t torture_pkd_openssh_rsa_rsa_diffie_hellman_group14_sha1
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a memory leak whereby the x, y, and k bignum fields within
a session's next_crypto structure were being unintentionally
initialized twice.
The leak can be seen before the fix with valgrind and the pkd
tests with:
valgrind \
--leak-check=full \
--show-leak-kinds=definite \
./pkd_hello -i1 -t torture_pkd_openssh_rsa_rsa_diffie_hellman_group_exchange_sha256
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to close the moduli file stream in `ssh_retrieve_dhgroup`.
The leak is observable with the pkd tests and valgrind with:
valgrind \
--track-fds=yes \
./pkd_hello -i1 \
-t torture_pkd_openssh_rsa_rsa_diffie_hellman_group_exchange_sha256
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This also replaces some occurrences of assert_true() with assert_null()
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This also replaces some occurrences of assert_true with assert_null.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The wrong conditional check for newly allocated memory would make the
function to fail when the allocation was successful and access invalid
memory when the allocation failed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Commit c306a693f3 ("buffer: Use size_t for argc argument in
ssh_buffer_(un)pack()") mentioned unpack in the commit log, but it only
touches the pack variants. Extend the conversion to unpack.
Pre-initialize the p pointer to avoid possible use before
initialization in case of early argc check failure.
This fixes build failure:
.../libssh-0.8.6/src/buffer.c: In function 'ssh_buffer_unpack_va':
.../libssh-0.8.6/src/buffer.c:1229:16: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow]
if (argc == -1){
^
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
There was no example of using a specific key for authentication so I added
one.
Signed-off-by: Eric Bentley <ebentley66@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
I noticed that there was no example showing server side public key encryption in the examples
so I added this one. I used authorizedkeys as a global to minimize the changes to the original
code as well as I was not sure the correct methodology of determining the .ssh directory location
for a user not using Linux. One code using the user parameter to determine the location to use
instead if desired.
Signed-off-by: Eric Bentley <ebentley66@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure most of the abstraction around the 3 libs are consistent.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The default pubkey authentication callback is not checking
anything.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This makes easier to create test cases using callbacks based on the
default callbacks (e.g. using the default callbacks but replacing one
specific callback)
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This aims to make it easier to implement custom callbacks.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The server can be configured through command line options or by
providing a state structure with the desired values set.
Currently supports only password based authentication.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Error: CLANG_WARNING: tests/unittests/torture_threads_pki_rsa.c:520:5:
warning: 1st function call argument is an uninitialized value
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
RSA with SHA-256/512 signatures have been interpreted as RSA with SHA-1
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
By default, the list of already stored known host types is preferred,
but this selection so far ignored the SHA2 extension and excluded these
keys in the KEXINIT list leading to not using this extension if not
explicitly enabled from configuration.
This commit extends the default list with the SHA2 signatures algoritms
and compares only base types so they can be listed in the KEXINIT list.
This adjust the tests to expect the full list of algorithms to pass.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If the server had an RSA host key, it provided unconditionally SHA2
signatures without consulting the client proposed list of supported host
keys.
This commit implements more fine-grained detection of the extension
to provide the client with valid signatures according to RFC 8332
Section 3.1.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The default rekeying recommendations are specified in
RFC4344 Section 3 (First and Second Rekeying Recommendations).
Additionally, the rekeying can be specified in configuration
file/options allowing us to turn the rekeying off, base it
on time or make it more strict.
The code is highly inspired by the OpenSSH rekeying code.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
And remove most of the direct access to the structure throughout the code
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If the rekey is initialized by client, it sends the first KEXINIT
message, changes to the INIT_SENT state and waits for the KEXINIT
message from the server. This was not covered in the current filter.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is more reliable fix than 83f2ac4a, which was failing for the
server initialized rekeying, because the session_state is altered
by receiving the KEXINIT from server.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The ssh_options_copy() function was missing several options that were added
in recent years.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When the server requests rekey, it can send the SSH2_MSG_EXT_INFO. This
message was being filtered out by the packet filtering. This includes a
test to enforce the filtering rules for this packet type.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This checks if a timeout has been set using ssh_options_set(). If it has
been set it will use that parametr by default for blocking sessions.
This is at least what users are expecting.
Fixes T33
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Set sftp error to SSH_FX_BAD_MESSAGE if an unexpected message is
received.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When an operation fails in sftp subsystem, set the sftp error, so that
it can be obtained by sftp_get_error().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When an attempt to read a closed channel happens, set the session error
state properly.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When reading a sftp packet and an EOF is received before all requested
bytes are read, set the session and sftp error codes.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* This makes the array constant in the session structure, avoiding
allocations and frees while parsing the file
* It also drops passing the seen array to all the functions,
because it is already part of the passed session
* The test cases are adjusted to match these changes
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
src/libcrypto.c:773:27: warning: comparison of integer expressions of
different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’}
[-Wsign-compare] <--[cc]
if (rc != 1 || outlen != len - aadlen) {
^~
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
clang was reporting a possible memory leak after mkdtemp() call, which
was a false positive, since mkdtemp() returns the same pointer provided
as the parameter, in case of success. This changes the code so that the
static analyser don't get confused.
Found by csbuild runner.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This fixes an access violation when ssh_init() was called after
ssh_finalize() in Windows when using OpenSSL 1.0.2 and libssh statically
linked.
Fixes T120
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This uses a runner configured with the tag "vs2017 or windows".
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
This introduces torture_get_current_working_dir() and
torture_change_dir() to allow changing directories in tests.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Introduced torture_create_temp_file() and torture_close_fp() to allow
creating temprary files transparently in Unix and Windows environment.
This also adds a unit test for the added functions.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Introduces a function to create temporary dir for testing purposes.
Also adds a minimal test for the temporary directory creation.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This completely removes the tests filter code from torture.c and calls
cmocka_set_test_filter() instead, if available. The checks for required
libraries, headers, and the availability of cmocka_set_test_filter()
were added to the cmake configuration.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Define flags S_IRWXO and S_IRWXG in torture_knownhosts_parsing.c when
building for Windows. These flags don't exist in Windows and are not
used.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In Windows environment, there are available low level I/O operations in
io.h, such as _read(), _write(), _open(), and _close().
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Include the header in tests/torture_pki.c only if it is available. It
is not available in Windows environment.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This should not be a problem for well-behaving clients that do not
append the ext-info-c to the rekey, but if they do, we should not
send it either.
Resolves: T121
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The RFC 8308 clearly says, that the additional ext-info-c should
be added only to the first SSH_MSG_KEXINIT.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This was failing when I tried to run the testsuite without
gcrypt devel libraries installed.
Signed-off-by: Jakub Jelen <jakuje@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Valgrind detects many uninitialized memory false positives from
libcrypto's AES-NI internals. Roll back to software AES when running
tests.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If nread is < 0 and no exception callback is set,
the following code block would cause a buffer overrun.
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If the hostkey type was not in the list of acceptable hostkey
types, the function failed to set the error state. Due to the
fact that the calling function ssh_packet_process() does not
handle the SSH_ERROR return code, the newkeys packet from the
server was silently ignored, stalling the connection until a
timeout occurred.
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh_send_keepalive() should use global_request() to properly configure
the state machine for packet filtering.
Signed-off-by: Nicolas Viennot <nicolas@viennot.biz>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added missing bn.h include.
Made engine.h include conditional, otherwise it would fail.
DSA_generate_parameters was deprecated long before 1.1.0.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit fixes a couple issues in the CMake configuration files and uses
native features from CMake:
* libssh-build-tree-settings.cmake is deleted. There was a typo that made
this file unusable, anyway.
* use the macros available in CMakePackageConfigHelpers.cmake to generate
the version file and check that the files exist
* Remove the LIBSSH_THREADS_LIBRARY variable, it used the non-existent
LIBSSH_THREADS_LIBRARY_NAME variable.
* Fix the in tree build. libssh can be used uninstalled again.
Test plan:
The values were tested after installing the new files and also without running
'make install'.
Signed-off-by: Christophe Giboudeaux <christophe@krop.fr>
This tests verifies that the only the first seen option is applied
throughout all the configuration files processed. It also verifies
that the configuration files are parsed automatically and that this
behavior can be overridden by configuration option.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This follows the OpenSSH behavior of parsing subseqent configuration
files, while applying only the first option.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This will allow to use the same configuration in client applications
including the users aliases or system wide cryptographic configuration.
As the configuration parsing is the last thing before doing the
actual connection, it might overwrite previously set options.
If this is not intended, the client application can
ask the configuration files to be parsed before setting some other
options that should not ve overwritten. The code ensures that
the configuration is not parsed again.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If either one is missing at this point, fill it with default vaules in
ssh_options_apply().
Previously, when setting up only knownhosts, global_knownhosts file
was left pointing to NULL and the ssh_known_hosts_read_entries()
was trying to open NULL file which is invalid.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, not all of the host keys algorithms were used for algorithm
negotiation. This verifies the algorithms list is sane and ordered
with the key types from known hosts in the first place.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, the file contained the known_hosts strings separated
by NULL bytes which somehow magically worked.
The test was also expecting all the keys from the file will have
the same key type, which was not indeed true.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, only the algorithms we had a keys for in known_hosts
were used, which could lead to no-matching algorithms errors if the
one key we used to depend on was removed from the server.
This commit adds also the other algorithms, but lists them only after
all the key types we have in known_hosts file.
Resolves: T105
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The code as it was written used only the first algorithm from
preferred_hostkeys array and compared it with the list returned
from the known hosts.
This commit is fixing the code so we actually compare each of the
algorithms from both of the lists and returns the intersection.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The conversion from ssh_keytype_e to string does not work for ECDSA keys,
because different key lengths have different string representation.
The usage of type_c should work also for every other key type in future,
but it does not reflrect different signature types (SHA2 extension for RSA
keys), but this early in the key exchange phase, we can not make any
assumptions about supported extensions by the server.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Created the test torture_packet_filter.c which tests if packets are
being correctly filtered.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The packet filter checks required states for the incoming packets and
reject them if they arrived in the wrong state.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When a SSH2_MSG_OPEN_FAILURE arrives, the channel state is checked
to be in SSH_CHANNEL_STATE_OPENING.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When a SSH2_MSG_OPEN_CONFIRMATION arrives, the channel state is checked
to be in SSH_CHANNEL_STATE_OPENING.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
After sending the client token, the auth state is set as
SSH_AUTH_STATE_GSSAPI_MIC_SENT. Then this can be expected to be the
state when a USERAUTH_FAILURE or USERAUTH_SUCCESS arrives.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The introduced auth state allows to identify when a request without
authentication information was sent.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The introduced auth state allows to identify when authentication using
password was tried.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Introduced the states SSH_AUTH_STATE_PUBKEY_OFFER_SENT and
SSH_AUTH_STATE_PUBKEY_AUTH_SENT to know when SSH2_MSG_USERAUTH_PK_OK and
SSH2_MSG_USERAUTH_SUCCESS should be expected.
Fixes T101
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fixes invalid read introduced by commit 21962d.
Accessing tokens[4] for a known_hosts line of
three tokens led to randomly rejected host keys.
This commit completely removes the check because
the optional comments field may contain whitespace.
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
The commit also propares the internals throughout the code base
for the inclusion of a new AEAD cipher, because previously, the
source code counted only with chacha20-poly1305 cipher, which
is very specific in many cases.
The SSH_HMAC_AEAD_GCM mac algorithm is not actually used, but the name
needed to be defined so we can match in the algorithms selection per
OpenSSH specification (MACs are ignored in case GCM is select as a cipher [1]).
If the provided OpenSSL does not provide EVP_aes_128_gcm() function,
the AES-GCM ciphers will not be compiled in.
[1] https://cvsweb.openbsd.org/src/usr.bin/ssh/PROTOCOL.chacha20poly1305?annotate=HEAD
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This removes the allocation for the header buffer for each packet we
send.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The added frees are unnecessary, but the static analyser does not know.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This changes add_cmocka_test() to receive compiler options, the
libraries to be linked to the test, and the linker options. The way the
tests are declared in tests/unittests and tests/client were updated.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure sftp_server_new allocates the packet and payload as
sftp_packet_read now expects the packet and payload to be
pre-allocated.
Similarly, ensure sftp_get_client_message does not free the packet.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The code for calculating SHA 512 in ssh_make_sessionid() had been
duplicated; the cases were unified.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Summary:
buffer variable 's' gets unpacked as char**, the previous code was passing
a char* causing segfaults on all readlink calls inside the unpacking code
Test Plan:
- without patchy examples/samplesftp segfaults in readlink
- with patchy it doesn't
Reviewers: asn
Differential Revision: https://bugs.libssh.org/D14
Signed-off-by: Harald Sitter <sitter@kde.org>
The previous timeout of 500 ms was not enough on slower machines or
while running the tests under valgrind. On much faster machines the
sleep() was bringing unnecessary overhead.
This method opens simple connection to the server verifying it is ready
to accept the connection from the test for 5 seconds. It the server
does not start until then, it fails the tests during initialization,
rather than leaving the cases to run against missing server.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
These frees are unnecessary because the negative tests should not
allocate the keys, but the static analyser reports memory leak errors.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is no longer needed since libssh can read the private keys
in new OpenSSH format.
This reverts commit 100c9c98ce.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This runs the same test that are ran on the legacy PEM files
also with the new OpenSSH key files.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This implements reading the OpenSSH key format accross the
cryptographic backends. Most of the code is shared and moved
to pki.c, just the building of the keys is implemented in
pki_privkey_build_*() functions.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This extends the torture API to provide a way to request
keys in different formats. This extends the keys with
private keys in the new OpenSSH format (default since
OpenSSH 7.8).
This also needs modifications to the ed25519 tests, which
do not support PEM format and expected the new format out of the
box.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
src/config.c:562:12: error: assuming signed overflow does not occur when
simplifying conditional to constant [-Werror=strict-overflow]
if (args < 1) {
^
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
OpenSSH's sshd does not work well under valgrind so lets avoid tracing it.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Since the verbosity is now set from the setup phase, we do not
need to reset the verbosity, especially not to any arbirary value
such as WARNING.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows adjusting the log level of config and options tests using
environment variable LIBSSH_VERBOSITY as it works in most of the other
tests.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Amends f818e63f8, which introduced the constants and matching of this
configuration option, but did not implement the handling of the values
which was causing the configuration parser failing for certain
configurations.
This commit exposes match_pattern_list() from match.c
Red Hat Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1624425
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The match_hostname() expects comma separated list, while the Host
config keyword in openssh uses spaces separated list by default.
Therefore any subseqent match or negated match in space separated
list will overwrite the previous matches.
This also adjusts the tests to make sure both of the versions work.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This was already done in the torture_threads_pki.
Without the explicit initialization, we can observe random
failures tests (at least of the torture_threads_crypto) from
various threads.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This involves mostly creation of host keys proofs but needs
to follow the same procedure as the client authentication
signatures.
At the same time, the SHA2 extension is enabled in the pkd
so we are able to atomicaly provide correct signatures and
pass tests.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The SHA2 variants should be preferred. Also the buffer needs to be
extended to fit all possible public key algorithms.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This includes intercepting the ext-info-c string from
the client kex proposal, configuring the server to allow using
this extension and sending the SSH_MSG_EXT_INFO packet back
to the client after the new keys are in use.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This does not affect old signatures, where the public key algorithm
matches the public key type.
This is a problem when using SHA2 extension for the RSA keys, where
the new signature algorithsm are introduced in addition to the
exitsing ssh-rsa which was ignored throughout the code.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
SSH_OPTIONS_PUBLICKEY_ACCEPTED_TYPES configuration option can limit
what keys can or can not be used for public key authentication.
This is useful for disabling obsolete algorithms while not completely
removing the support for them or allows to configure what public key
algorithms will be used with the SHA2 RSA extension.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Verify the PUBLICKEY_ACCEPTED_TYPES option is handled correctly
and affects the signature algorithm selection based on the
extensions and can be used to limit list of offered mechanisms
to the server.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This effectively allows to disable using the SHA2 extension, disable
other old public key mechanisms out of the box (hello DSA) or force
the new SHA2-based key algorithm types if needed.
This exposes the default_methods array from kex.c.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This option allows to specify acceptable public key algorithms
and reflects the PubkeyAcceptedTypes configuration option from
OpenSSH.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The new constants for flags are defined in draft-miller-ssh-agent-02
are active if the SHA2 extension is negotiated with the server.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This introduces a new test case for RSA unit tests, verifying that
libraries are able to provide and verify the RSA signatures with
SHA2 hash algorithms.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* This change introduces a new API to request signature using
one key and different hash algorithms. This is used only with
RSA keys, that used to have SHA1 hardcoded, but the new
algorithsms allow to use the SHA2 hashes, if the extension
is negotiated.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This changes the private API by adding one more argument to function
pki_signature_from_blob()
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
RFC 8308: The extension negotiation in Secure Shell (SSH) Protocol
RFC 8332: Use of RSA Keys with SHA-256 and SHA-512
in the Secure Shell (SSH) Protocol
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is required to work against OpenSSH 7.8, which is now
writing keys in new openssh format by default
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
src/poll.c:1024:9: error: assuming signed overflow does not occur when
simplifying conditional to constant [-Werror=strict-overflow]
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
The target created to copy the file must be the one make dist is
depending on. Otherwise it will not copy the generated files to the
desired path.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Moved the symbols list formatting to the ExtractSymbols.cmake. The
resulting list of symbols is sorted and printed in a more readable way
(one symbol per line). Fixed the script to copy the generated symbols.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
tests/pkd/pkd_hello.c:743:12: error: assuming signed overflow does not
occur when simplifying conditional to constant [-Werror=strict-overflow]
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Fixes, among others, ProxyCommand with %p when no port is used on
commandline or config file, thus using the default port.
Fixes T94
Signed-off-by: Alex Hermann <alex@hexla.nl>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix the targets and output files handling to make the symbols to be
updated correctly when a symbol is added or removed.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This changes amends f561e6bcb3 which
introduces same check in one place, but miss it in other two places.
We encountered this issue with qemu using SFTP to transfer large
data chunks and in some cases, the file transfer was interrupted
without any reason. From the debug messages, it showed up that
last part of data message/packet was not handled in the time
of the sftp_read() call, therefore the ssh_channel_read() returned
zero (there was no more data to read yet), which made the whole
transfer fail hard instead of retrying later.
The proposed change is reusing the code from previously referenced
commit also in the other places.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Updated threading documentation mentioning changes in the requirements
to use libssh in multithread scenarios.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
src/log.c:71:32: error: '%06ld' directive output may be truncated
writing between 6 and 20 bytes into a region of size between 0 and 63
[-Werror=format-truncation=]
snprintf(buf, len, "%s.%06ld", tbuf, (long)tv.tv_usec);
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
This fixes the assignment of variables to comments and makes
the output symmetric with sftp_dequeue().
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If we compile with Visual Studio, we need a DllMain() for running init
and finialize which is the same as a constructor and destructor.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
If the destructor calls finalize, ignore the init counter and finalize
the library anyway.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This changes the condition to use the static error check mutex
initializer. If it is not available, use the default static mutex
initializer.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds a cmake module, FindABIMap, which looks for abimap and
provides functions to generate a symbol version linker script.
The module can be included using find_package(ABIMap).
This also adds the option to compile with symbol versioning. The symbol
list is obtained from the header files by filtering those marked with
the LIBSSH_API modifier.
Such symbols are used as input to generate the version script used by
the linker. The version script is automatically updated as new symbols
marked with LIBSSH_API are added to the header files.
If any symbol is removed, the build will fail due to break in the ABI.
Symbol versioning is enabled by default if abimap has been found. It is
disabled in non-UNIX platforms. It can be disabled by passing
"-DWITH_SYMBOL_VERSIONING=OFF" option to cmake.
Pair-Programmed-With: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
When errors occurred, the session auth state was not being updated,
leading to failures due to the wrong state in following authentication
methods.
Fixes T56
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This can help when debugging in the future
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Since the call is made automatically when the library is loaded, these
calls are no longer required (if the library is not linked statically).
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When pthreads is available, run the threads tests on Windows
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Run the tests from torture_pki_rsa.c on threads. Tests requiring files
to be removed are not tested, since they would require the access to
the files to be synchronized.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test run crypto test on multiple threads.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test run buffer tests on multiple threads.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The test runs ssh_init()/ssh_finalize() on multiple threads.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Added Windows threads implementation based on CriticalSection.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This makes unnecessary to call ssh_init() when the library is
dynamically loaded. Also removes the threads shared library. The used
threads implementation is chosen in configuration time, changing the
ssh_threads_get_default() depending on the available threads library.
Internally, it is expected a threads implementation providing:
- void ssh_mutex_lock(void **mutex);
- void ssh_mutex_unlock(void **mutex);
- struct ssh_threads_callbacks_struct *ssh_threads_get_default(void);
and a crypto implementation providing:
- int crypto_thread_init(struct ssh_threads_callbacks_struct *user_callbacks);
- void crypto_thread_finalize(void);
This adds internal threads implementation for pthreads and noop.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds support for the ed25519 keys in the pkd framework and adds
openssh-only tests utilizing these host keys (dropbear does not support
them yet).
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, the support was only partial and if the ed25519 key was
the only one, the internal checks were failing the tests.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add a small helper for ssh_buffer to ensure that the buffer has a
certain amount of space already preallocated. This can be useful in case
it is known how much data is going to be added to a buffer, to avoid
multiple reallocations.
Make use of it in few places in the library.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This verifies that all the supported host keys can be used and
verified by the client, including the SHA2 extension in RFC 8332.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
torture_connect_double test case used to test the connect only up
to key exchange phase, but not after the new keys are stated to be
used for communication. The keys from previous connectoin were not
cleaned up from the previous invocation as well as the seqence
number was not reset and therefore any further packet was failing
with length-check errors or MAC errors.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This tests multiple items, (1) cross compilation, (2) compilation
on debian and (3) CI run on MIPS systems, tested under qemu. This target
was originally written for GnuTLS by Michael Weiser.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Fix the build for mbedTLS:
* set HAVE_CHACHA for non-mbedTLS builds
* only compile chachapoly.c when HAVE_CHACHA
* use empty CHACHA20 in src/kex.c unless HAVE_CHACHA
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In 06b9901e64, invocations of `set_decrypt_key`
and `set_encrypt_key` were moved into the `ssh_packet_newkeys` callback, away
from the packet decrypt and encrypt functions.
Remove the extra `set_decrypt_key` for the case that an `aead_decrypt_length`
is not NULL. At this time, only the chacha20-poly1305@openssh.com cipher
is affected by this change.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
With this change there is less code specific to the
chacha20-poly1305 cipher found in src/wrapper.c.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The local `rc` variable here is never set. Fix a warning that is
emitted due to `-Wunused-variable`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Make the `test_data` larger so that tests do not read beyond
its length. Observed in testing with an `-fsanitize=address`
build locally.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Avoid setting keys on every packet decrypt or encrypt operation.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
That code is really ugly, but it wasn't meant to be modular at all in the
first place.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The `-v` is only recognized by `dbclient` when dropbear is built
in its DEBUG_TRACE mode. Omit that flag by default to avoid a
warning log emitted to stderr.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Support for the `blowfish-cbc` cipher has been removed from OpenSSH
as of version 7.6. Remove this cipher from the pkd tests so that
the tests will pass together with a modern OpenSSH client.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Emit a friendly error message for OpenSSH clients older than
7.0. Some of the recent pkd changes now require a modern
client to support some newer config options.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As of OpenSSH 6.9, support for `ssh-dss` user keys is disabled by default
at runtime. Specify an explicit `-o PubkeyAcceptedKeyTYpes` in the pkd
tests to explicitly enable each user key type being tested, including
`ssh-dss`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As of OpenSSH 6.9, support for `ssh-dss` host keys is disabled by default
at runtime. Specify an explicit `-o HostKeyAlgorithms` in the pkd tests
to explicitly enable each host key type being tested, including `ssh-dss`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use the socket_wrapper preload shim when running the `pkd_hello`
test with `make test`. The end goal here is to get this test
running alongside normal tests in regular CI. Changes to do
this:
* Configure PKD_ENVIRONMENT for the `pkd_hello_i1` test in the
CMakeLists.txt file.
* Add a `--socket-wrapper-dir|-w` flag that is used to opt-in to
initializing a SOCKET_WRAPPER_DIR as expected by the socket_wrapper
library.
A runtime flag is used here to make it easy to run `pkd_hello`
with the socket_wrapper library while avoiding a hard dependency.
Testing done: observed socker_wrapper in effect with `strace`;
running `make test` uses the wrapper correctly on my local
machine.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add an entry for a `pkd_hello_i1` test which runs one iteration
through each of the pkd algorithm combinations.
Testing done: now `make test` will run `pkd_hello -i1` which
completes in ~25 seconds on my local machine.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to include config.h so that the `HAVE_DSA` value is properly set
when building the pkd tests.
Introduced with 778652460f,
Testing done: with this change, the `pkd_hello` test is passing on an
OpenSSL 1.1.0 build for me. Previously it would fail pubkey exchange
early on for DSA- and ECDSA-type host keys.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix two memory leaks in `ssh_get_pubkey_hash` for some error paths.
The local `h` buffer and `ctx` MD5 context each must be free'd for
the SSH_ERROR cases.
Introduced with 16217454d5.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix `ssh_get_pubkey_hash` indentation to use softabs
with 4 spaces. No change in behavior.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Wrap some function definitions with `HAVE_LIBCRYPTO` ifdefs to
match their usages in `torture_run_tests`.
Fixes this warning I observe when building locally:
torture_pki_ecdsa.c:341:13: warning:
‘torture_pki_ecdsa_write_privkey’ defined but not used
[-Wunused-function]
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to provide the `ssh_string` pubkey blob to the buffer packing
routine when computing the SSH_MSG_KEXDH_REPLY message, rather than
the new `ssh_key` type.
Introduced with 16217454d5.
Testing done: with this change, the `pkd_hello` test is passing on a
mbedTLS build for me. Previously it would segfault during pubkey
exchange with "ecdh-sha2-nistp256".
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to provide the `ssh_string` pubkey blob to the buffer packing
routine when computing the SSH_MSG_KEXDH_REPLY message, rather than
the new `ssh_key` type.
Introduced with 16217454d5.
Testing done: with this change, the `pkd_hello` test is passing on a
libgcrypt build for me. Previously it would segfault during pubkey
exchange with "ecdh-sha2-nistp256".
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to provide the `ssh_string` pubkey blob to the buffer packing
routine when computing the SSH_MSG_KEXDH_REPLY message, rather than
the new `ssh_key` type.
Introduced with 16217454d5.
Testing done: with this change, `pkd_hello` test is passing on an
OpenSSL 1.1.0 build for me. Previously it would segfault during
pubkey exchange with "ecdh-sha2-nistp256".
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When building in a cross-compiling environment, use wine to run the
tests.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is necessary when building the tests for Windows.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Tilo Eckart.
The global variable "ge25519_base" is referenced in the module
"src/external/ed25519.c" and initialized in "src/external/ge25519.c".
The lack of the extern keyword in the header results in different
instances being compiled into both translation units with some
compilers.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
This is a regression introduced by 16217454d5
We import the pubkey into current_crypto which is NULL instead of
next_crypto.
Fixes T90
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
This allows compiling and testing with undefined sanitizer.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows compiling and testing with undefined sanitizer.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This allows operating under environments where the username variables
are not present.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add a new option SSH_OPTIONS_NODELAY to enable or disable the
Nagle Algorithm (TCP_NODELAY) on the session socket.
Improved performance can be achieved for some applications like
sftp servers by enabling SSH_OPTIONS_NODELAY as typically, the
next request won't arrive until the server replies, which are
typically small writes.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Useful on Windows platforms where SecureZeroMemory is available.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix OSX build error about embedding a directive within macro arguments.
Apparently, snprintf is implemented as a macro on that platform.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh_connector_free fails to remove the in/out channel callbacks
as ssh_connector_remove_event sets the in/out channel variables
to NULL.
Have ssh_connector_free, remove the channel callbacks first before
invoking ssh_connector_remove_event.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
POLLHUP needs to be checked on in_fd, which may be a pipe.
A pipe in Linux signals EOF through POLLHUP (see:
http://www.greenend.org.uk/rjk/tech/poll.html)
Without checking POLLHUP, a client could spin up indefinetely
doing ssh_event_dopoll.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The stray semi-colon in sftp.h is flagged when using -pedantic
which affects clients that include the header and use -pedantic
and -Werror on their codebase.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
torture_rand and torture_server_x11 call ssh_init without checking
the return value. If mbedTLS is built without threading support
ssh_init fails but the tests continue and then segfault since threading
wasn't correctly initialised.
Add a section that documents requirements for mbedTLS usage in a
multi threaded environment to README.mbedtls.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
We need to specify a cipher when we generate a key with a password.
OpenSSH uses aes_128_cbc, so we should use the same.
Thanks to Julian Lunz for the report.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Summary:
When ed25519 was introduced in commit 93c7b81b4e,
the ed25519 case was added after the ecdsa case in src/pki.c. The ecdsa case seems to
have relied on falling through to report an error, when HAVE_ECC is not defined.
If HAVE_ECC is not defined, but ecdsa keys are used, with for example,
ssh_pki_import_pubkey_file, the code fallthroughs into the ed25519 case.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Test Plan: Unit tests passed. No memory leaks found with valgrind.
Reviewers: asn
Differential Revision: https://bugs.libssh.org/D13
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Summary:
This patch adds support for mbedTLS as a crypto backend for libssh.
mbedTLS is an SSL/TLS library that has been designed to mainly be used
in embedded systems. It is loosely coupled and has a low memory
footprint. mbedTLS also provides a cryptography library (libmbedcrypto)
that can be used without the TLS modules.
The patch is unfortunately quite big, since several new files had to
be added.
DSA is disabled at compile time, since mbedTLS doesn't support DSA
Patch review and feedback would be appreciated, and if any issues or
suggestions appear, I'm willing to work on them.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Test Plan:
* The patch has been tested with a Debug and MinSizeRel build, with
libssh unit tests, client tests and the pkd tests.
* All the tests have been run with valgrind's memcheck, drd and helgrind
tools.
* The examples/samplessh client works when built with the patch.
Reviewers: asn, aris
Subscribers: simonsj
Differential Revision: https://bugs.libssh.org/D1
pcap file is generated by the processes writing to the sockets,
which is not allowed for privilege-separated process in new
OpenSSH servers (confined by seccomp filter).
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Summary:
Fix a typo for old libgcrypt builds `k_length` -> `k_len`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Test Plan: * Spotted this last-minute typo bug in local testing.
Reviewers: asn
Reviewed By: asn
Differential Revision: https://bugs.libssh.org/D10
Summary:
Fix a typo for old libgcrypt builds `k_length` -> `k_len`.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Test Plan: * Spotted this last-minute typo bug in local testing.
Reviewers: asn
Differential Revision: https://bugs.libssh.org/D10
Expose an API 'ssh_server_init_kex' which allows one to change the set of
key exchange, hostkey, ciphers, MACs, and compression algorithms currently
configured for the ssh_session at hand, after having started the
'ssh_handle_key_exchange' process.
One can use this API from the already-existing 'connect_status_function'
callback to dynamically modify the set of algorithms used after having
received the client banner, but before sending out the initial KEXINIT
message.
For example, one might want to prevent advertising the curve25519 key
exchange algorithm for older OpenSSH clients due to interop bugs.
Fixes T25
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
There's a race window between the accept loop's call to
accept(2) and it checking `ctx.keep_going`. Forcefully
close the server socket such that any raced `accept` ends
up failing.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Sometimes, but not always, the pkd tests will fail because they
close the socket at hand a bit too early for the client. The
client in turn may exit non-zero when that happens.
Split up the final close loop so that pkd waits to receive a
channel close from the client, and then socket close, before
finally returning.
With this change I observe that tests are now passing in
environments that would previously tickle the above race
and fail.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a memory leak in the path where parsing returns early due
to seeing a repeated opcode. A testcase is added which
demonstrates the leak and fix with valgrind.
Resolves CID 1374267.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Summary:
Based on Dirkjan's original patch series here:
* https://www.libssh.org/archive/libssh/2015-08/0000029.html
Here the changes are adapted for the current master
branch, and expanded to include libgcrypt support.
Co-Authored-By: Dirkjan Bussink <d.bussink@gmail.com>
Signed-off-by: Jon Simons <jon@jonsimons.org>
Test Plan:
* Ran pkd tests for libcrypto and libgcrypt builds.
* Ran client torture_algorithms.c tests for libcrypto and libgcrypt builds.
* Tested across multiple libgcrypts ("1.6.3" and "1.7.6-beta").
Reviewers: aris, asn
Reviewed By: asn
Tags: #libssh
Differential Revision: https://bugs.libssh.org/D7
Summary:
Based on Dirkjan's original patch series here:
* https://www.libssh.org/archive/libssh/2015-08/0000029.html
Here the changes are adapted for the current master
branch, and expanded to include libgcrypt support.
Co-Authored-By: Dirkjan Bussink <d.bussink@gmail.com>
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Test Plan:
* Ran pkd tests for libcrypto and libgcrypt builds.
* Ran client torture_algorithms.c tests for libcrypto and libgcrypt builds.
* Tested across multiple libgcrypts ("1.6.3" and "1.7.6-beta").
Reviewers: aris, asn
Tags: #libssh
Differential Revision: https://bugs.libssh.org/D7
That way, we will not fail later on key exchange phase when something
unknown is negotiated.
Fixes T37
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Summary:
Hello, this is a resend for a quick memory leak fix for one of the unit
tests, originally sent to the mailing list here:
* https://www.libssh.org/archive/libssh/2017-07/0000017.html
Test Plan:
* Before the fix and running the test with valgrind:
```
[simonsj@simonsj-lx5 : unittests] valgrind --leak-check=full ./torture_options >/dev/null
==93134== Memcheck, a memory error detector
==93134== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==93134== Using Valgrind-3.10.0 and LibVEX; rerun with -h for copyright info
==93134== Command: ./torture_options
==93134==
[ PASSED ] 10 test(s).
[ PASSED ] 1 test(s).
==93134==
==93134== HEAP SUMMARY:
==93134== in use at exit: 80 bytes in 1 blocks
==93134== total heap usage: 977 allocs, 976 frees, 75,029 bytes allocated
==93134==
==93134== 80 bytes in 1 blocks are definitely lost in loss record 1 of 1
==93134== at 0x4C28C20: malloc (vg_replace_malloc.c:296)
==93134== by 0x41BAB0: ssh_key_new (pki.c:107)
==93134== by 0x40DF90: torture_bind_options_import_key (torture_options.c:222)
==93134== by 0x4E3AA3A: cmocka_run_one_test_or_fixture (cmocka.c:2304)
==93134== by 0x4E3ACEA: cmocka_run_one_tests (cmocka.c:2412)
==93134== by 0x4E3B036: _cmocka_run_group_tests (cmocka.c:2517)
==93134== by 0x40E9E3: torture_run_tests (torture_options.c:276)
==93134== by 0x40DE68: main (torture.c:1100)
==93134==
==93134== LEAK SUMMARY:
==93134== definitely lost: 80 bytes in 1 blocks
==93134== indirectly lost: 0 bytes in 0 blocks
==93134== possibly lost: 0 bytes in 0 blocks
==93134== still reachable: 0 bytes in 0 blocks
==93134== suppressed: 0 bytes in 0 blocks
==93134==
==93134== For counts of detected and suppressed errors, rerun with: -v
==93134== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
```
* And after:
```
[simonsj@simonsj-lx5 : unittests] valgrind --leak-check=full ./torture_options >/dev/null
==93294== Memcheck, a memory error detector
==93294== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==93294== Using Valgrind-3.10.0 and LibVEX; rerun with -h for copyright info
==93294== Command: ./torture_options
==93294==
[ PASSED ] 10 test(s).
[ PASSED ] 1 test(s).
==93294==
==93294== HEAP SUMMARY:
==93294== in use at exit: 0 bytes in 0 blocks
==93294== total heap usage: 977 allocs, 977 frees, 75,029 bytes allocated
==93294==
==93294== All heap blocks were freed -- no leaks are possible
==93294==
==93294== For counts of detected and suppressed errors, rerun with: -v
==93294== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
```
Reviewers: asn
Reviewed By: asn
Differential Revision: https://bugs.libssh.org/D3
Summary:
Hello, resending this patch series for the `pkd` tests, originally
sent to the mailing list here:
* https://www.libssh.org/archive/libssh/2017-07/0000011.html
Here are a few improvements and fixups for the `pkd` tests, including
a new flag `-m` that can be used to run only certain subsets of the
test passes.
Jon Simons (5):
pkd: rename AES192 cipher suite -> OPENSSHONLY
pkd_daemon.c: mark `pkd_ready` field as volatile
pkd: fixups for updated CMocka CMUnitTest struct
pkd: refactor -t testname lookup-by-name
pkd: support -m to match multiple tests
tests/pkd/pkd_daemon.c | 2 +-
tests/pkd/pkd_daemon.h | 1 +
tests/pkd/pkd_hello.c | 84 +++++++++++++++++++++++++++++++++-----------------
3 files changed, 58 insertions(+), 29 deletions(-)
--
Test Plan:
* I've been using the new `-m` mode locally for a long time to run
only certain groups of tests.
* The CMocka struct fixes can be seen in the pkd output before and
after: after, there are no more extraneous test output strings.
* The fix for the `pkd_ready` field can be observed when building
the libssh tests with `-Os` on a Debian system (before the fix,
pkd would hang, after the fix, it runs as intended).
Reviewers: asn
Reviewed By: asn
Tags: #libssh
Differential Revision: https://bugs.libssh.org/D2
On OpenSSL versions prior to 1.1.0, `EVP_CIPHER_CTX_cleanup` will
dereference its argument regardless of whether it is NULL. This
is not a problem on OpenSSL at or beyond 1.1.0, where
`EVP_CIPHER_CTX_cleanup` (macro to `EVP_CIPHER_CTX_reset`) returns
early upon NULL input.
Move the call to `EVP_CIPHER_CTX_cleanup` under the existing NULL
check in `evp_cipher_cleanup` to avoid the problem.
Introduced with this build-break fix:
* e66f370682
Found in manual testing in an environment with an older OpenSSL.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Relax the cases where `ssh_analyze_banner` fails to extract a
major and minor version from banners which appear like OpenSSH
banners.
Update the tests to demonstrate that now a banner as might be
sent by `ssh-keyscan(1)` ("SSH-2.0-OpenSSH-keyscan") no longer
returns failure.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
With this change, a HAVE_LIBCRYPTO #ifdef is removed from wrapper.c.
Now, the libcrypto-specific logic for EVP_CIPHER_CTX_free is moved
into the ssh_cipher_struct cleanup callback handler for those
ciphers.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a gcrypt build error introduced with
48e7b098f8.
The ssh_cipher_struct only contains a `ctx` field on
the libcrypto builds, so it can't be referenced unless
within HAVE_LIBCRYPTO.
This build fix preserves the original spirit of the
change in 48e7b098f8:
only call `EVP_CIPHER_CTX_free` when `cipher->ctx`
is non-NULL.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix error-checking for `strtoul` in `ssh_analyze_banner`, and
enable some tests which demonstrate the fix before-and-after.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
No changes to code, only whitespace indentation and
an update to the function docs.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a resource leak in `hmac_final`: say `HMAC_CTX_free` instead
of `HMAC_CTX_reset`. This matches the error handling as done in
`hmac_init`. Introduced with cf1e808e2f.
The problem is reproducible running the `pkd_hello` test with:
valgrind --leak-check=full ./pkd_hello -i1 -t torture_pkd_openssh_dsa_rsa_default
Resolves https://red.libssh.org/issues/252.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
On older OpenSSL versions, the EVP_MD_CTX fields within an HMAC_CTX
structure are contained inlined (change here [1]): be sure to not
try to free those fields on those builds.
Found running the `pkd_hello` test with:
valgrind ./pkd_hello -i1 -t torture_pkd_openssh_dsa_rsa_default
^ valgrind will cite "Invalid free() ..." errors which are present
before this fix and absent after, when building with OpenSSL 1.0.1.
[1] 6e59a892db
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
libssh fails to read the configuration from a config file due to a
wrong check in 'ssh_config_parse_line' procedure in 'config.c'; it's
effectively skipping every opcode (and therefore every option) from
the file. The change fixes that behaviour.
Signed-off-by: Artyom V. Poptsov <poptsov.artyom@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Makes sure we free pending keyboard auth prompts
so prompts that have not be replied to do not leak.
Signed-off-by: Peter Volpe <pvolpe@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Check if the size the other party sent is a valid size in the
transmitted buffer.
Thanks to Alex Gaynor for finding and reporting the issue.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Check if the size the other party sent is a valid size in the
transmitted buffer.
Thanks to Alex Gaynor for finding and reporting the issue.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Tokens are not allowed (according to the manpage).
Expansion was introduced by a wrong fix for #127.
This commit reverts part of 6eea08a9ef
Signed-off-by: Alex Hermann <alex@hexla.nl>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This sets the bind private key directly from an ssh_key struct instead
of reading a file.
Signed-off-by: Alfredo Mazzinghi <am2419@cl.cam.ac.uk>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/pki.c (ssh_signature_free): Fix test for ECC using gcrypt.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This has been made opaque and it needs to be a pointer.
This is for OpenSSL 1.1.0 support.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* include/libssh/crypto.h (struct ssh_crypto_struct): Provide a
suitable 'ecdh_privkey'.
* include/libssh/ecdh.h: Also define 'HAVE_ECDH' if we do ECC using
libgcrypt.
(ecdh_build_k): New prototype.
* src/CMakeLists.txt (libssh_SRCS): Add backend-specific files.
* src/ecdh.c: Move backend-specific parts to...
* src/ecdh_crypto.c: ... this file.
* src/ecdh_gcrypt.c: New file.
* src/wrapper.c (crypto_free): Free 'ecdh_privkey'.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* include/libssh/libgcrypt.h (EVPCTX): Fix type.
(NID_gcrypt_nistp{256,384,521}): New constants.
* src/libgcrypt.c (nid_to_md_algo): New function mapping curves to
digest algorithms.
(evp{,_init,_update,_final}): New functions.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/curve25519.c (ssh_client_curve25519_init): Make use of the
gcrypt-variant of 'bignum_bin2bn'.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When parsing the result of a successful fstat call, make sure to free
the resulting reply message.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Comparison ((flags & O_RDONLY) == O_RDONLY) is always true.
Also, O_RDWR, O_WRONLY and O_RDONLY are mutually exclusive => no need to check all of them
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
This saves a round-trip with SSHv2 connecting to the server. See RFC
4253 section 5.2 (New Client, Old Server).
Thanks to Yang Yubo <yang@yangyubo.com> for the suggestion.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
According to RFC 4253 the max banner length is 255.
Thanks to Saju Panikulam <spanikulam@ipswitch.com> for the report.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Comply with RFC 4253 compliance section 4.2.
Allow data other than "SSH-" to be sent across prior to the actual
version striong.
Signed-off-by: Ken Reister <reister.kenneth@CIMCOR.COM>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In Cockpit we've seen this memory leak:
at 0x4C2A9C7: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x5B76B03: ssh_userauth_agent (auth.c:778)
by 0x40DD5A: cockpit_ssh_authenticate (cockpitsshtransport.c:327)
BUG: https://red.libssh.org/issues/208
Signed-off-by: Stef Walter <stefw@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/pki_gcrypt.c (pki_export_pubkey_rsa1): Rework to be more
idiomatic. Fix leaking MPIs.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/pki_gcrypt.c (pki_publickey_to_blob): Rework using the new
helper 'ssh_sexp_extract_mpi'.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/pki_gcrypt.c (pki_key_dup): Rework to be more idiomatic.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/options.c (ssh_options_getopt): Only call 'ssh_options_set' if
a port has been given.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* tests/torture.c (torture_setup_create_sshd_config): Rework how the
location of the sftp server is discovered, and add the Debian-specific
location.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
* src/pki_gcrypt.c (asn1_get): Generalize from 'asn1_get_int'.
(asn1_get_int): New function simply calling 'asn1_get'.
Signed-off-by: Justus Winter <justus@g10code.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
- enabled TrustedUserCAKeys option in torture.c
- adds a new set of (signed) keys for bob in a separate dir
The private key used to generate the certs is included, but not required.
Signed-off-by: Axel Eppe <aeppe@google.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Due to a byte/bit confusion, the DH secret was too short. This file was
completely reworked and will be commited in a future version.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Documentation now is congruent with the code:
- SSH_OK is returned on success,
- SSH_ERROR is returned on error.
Signed-off-by: Younes Serraj <younes.serraj@gmail.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
ssh-agent needs to be executed as the local user and not a fake user or
we will not be able to add identies.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Note that removing ssh_buffer_get_begin() doesn't break API
compatibility, as this functions has never been exposed (it only
has the LIBSSH_API prefix).
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This commit is a preparatory stage for removing ssh_buffer_get_begin().
Note that removing ssh_buffer_get_begin() doesn't break API
compatibility, as this functions has never been exposed (it only has the
LIBSSH_API prefix).
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As ssh_buffer_get_len() actually calls ssh_buffer_get_rest_len(), let's
just use the first one. This is a preparatory step for removing
ssh_buffer_get_rest_len().
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This is a preparatory step for having the behavior of
ssh_buffer_get_rest_len() in the ssh_buffer_get_len() and then remove
the ssh_buffer_rest_len()
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
/home/ffidenci/src/upstream/libssh/tests/benchmarks/bench_scp.c: In
function ‘benchmarks_scp_down’:
/home/ffidenci/src/upstream/libssh/tests/benchmarks/bench_scp.c:112:14:
warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has
type ‘size_t {aka long unsigned int}’ [-Wformat=]
printf("Only %d bytes available (on %lu requested).\n",size,bytes);
^
/home/ffidenci/src/upstream/libssh/tests/benchmarks/bench_scp.c:116:14:
warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has
type ‘size_t {aka long unsigned int}’ [-Wformat=]
printf("File is %d bytes (on %lu requested). Will cut the end\n"
,size,bytes);
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
/home/ffidenci/src/upstream/libssh/src/pki_gcrypt.c: In function
‘pki_key_compare’:
/home/ffidenci/src/upstream/libssh/src/pki_gcrypt.c:1082:5: warning:
enumeration value ‘SSH_KEYTYPE_DSS_CERT01’ not handled in switch
[-Wswitch]
switch (k1->type) {
^
/home/ffidenci/src/upstream/libssh/src/pki_gcrypt.c:1082:5: warning:
enumeration value ‘SSH_KEYTYPE_RSA_CERT01’ not handled in switch
[-Wswitch]
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Having "ssh_" prefix in the functions' name will avoid possible clashes
when compiling libssh statically.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
- ssh_pki_import_cert_base64()
- ssh_pki_import_cert_file()
- ssh_pki_import_cert_blob()
Those functions are currently simple wrappers around their pubkey counterpart.
- ssh_pki_copy_cert_to_privkey()
This function copies the cert-specific data to a private key.
Signed-off-by: Axel Eppe <aeppe@google.com>
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Implicitly fixed unsafe return code handling that could result in use-after-free.
Signed-off-by: Tilo Eckert <tilo.eckert@flam.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Allow callers to specify their own socket
for an ssh agent.
Signed-off-by: Peter Volpe <pvolpe@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The previous list is not freed. Since the new session just got
created, an identity list is already allocated and empty.
Signed-off-by: Sebastien Boving <seb@google.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Also consider the host key type at hand when computing whether a
'first_kex_packet_follows' packet matches the current server settings.
Without this change libssh may incorrectly believe that guessed
settings which match by kex algorithm alone fully match: the host
key types must also match. Observed when testing with dropbear
clients.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Return SSH_OK for the case that an incoming SSH_MSG_KEXDH_INIT should be
ignored. That is, for the case that the initial 'first_kex_packet_follows'
guess is incorrect. Before this change sessions served with libssh can be
observed to error out unexpectedly early when testing with dropbear clients
that send an incompatible guess.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
CID: #1250106
This fixes a 1 byte output overflow for large key length (not reachable
in libssh). Pulled from OpenBSD BCrypt PBKDF implementation.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
This is an addition to CVE-2015-3146 to fix the null pointer
dereference. The patch is not required to fix the CVE but prevents
issues in future.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The state validation in the packet handlers for SSH_MSG_NEWKEYS and
SSH_MSG_KEXDH_REPLY had a bug which did not raise an error.
The issue has been found and reported by Mariusz Ziule.
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
I've improved FindOpenSSL and FindZLIB in that version to work well with
Windows and Linux. This was 2011 it should be old enough that most
distributions have at least this version available.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Option can be used to filter out irrelevant tests
usage: ./torture_pki '*ed25519'
Signed-off-by: Aris Adamantiadis <aris@0xbadc0de.be>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
torture_server_x11 tests whether a libssh server can correctly parse an
X11 request.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add the ability to generate a keypair (RSA, but tests that focus on
what occurs over a connection may well not care) and an ssh_bind
easily.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
BUG: https://red.libssh.org/issues/168
On some platforms, like OpenBSD, stdin and friends are macros which break
compilation of this struct. I've fixed these names such that it compiles and
runs cleanly on OpenBSD
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If realloc of sftp->ext->name or sftp->ext->data fails, the memory
previously allocated for the respective member is leaked. Fix this by
storing the return value of realloc() in a temporary variable which only
gets assigned to the respective sftp->ext member on success.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix the typo 'stengths' -> 'strengths' and remove the trailing white
space on the same line.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Before this change, dangling pointers can be unintentionally left in the
respective next_crypto kex methods slots. Ensure to set all slots to
NULL in the error-out path.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix DSA signature extraction for the LIBGCRYPT build. Here, the same fix
that was applied to the LIBCRYPTO build for https://red.libssh.org/issues/144
is now adapted for pki_gcrypt. Additionally, ensure to set the resulting
output sig_blob buffer before returning.
Before this fix, one can observe the failure with the pkd test on a LIBGCRYPT
build as so:
# ./pkd_hello -i 1 -t torture_pkd_openssh_dsa_dsa_default
After, runs of 10000 back-to-back iterations of the same test are passing.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Disable the 'make_string_bn_inplace' helper function for the LIBGCRYPT
build, rather than using '#error' to fail the build completely.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Per ecdsa(3ssl), ECDSA_SIG_new does allocate its 'r' and 's' bignum fields.
Fix a bug where the initial 'r' and 's' bignums were being overwritten with
newly-allocated bignums, resulting in a memory leak.
BUG: https://red.libssh.org/issues/175
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a build breakage when '-DWITH_SERVER=OFF' is set: skip building the
pkd test for that case. Add some missing includes for the OpenIndiana
and FreeBSD builds.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Introduce a sample public-key testing daemon to the 'pkd' test directory,
and add support code for cycling through various combinations of different
key exchange, cipher, and MAC algorithms.
The goal of the 'pkd_hello' test is to make it easy to test interactions
between non-libssh clients and a libssh-server, and to provide a starting
point for testing new implementations for key types, ciphers, MACs, and
so on. The thinking is that testing a new algorithm should be as simple
as adding a new line for it in the PKDTESTS_* lists.
Macros are used to generate the tests and helper functions for a couple of
clients -- here, OpenSSH and dropbear are included for the first cut. If
binaries are found for these clients, their test lists will be enabled;
when binaries are not found for a given client, those tests are skipped.
Tests are run in one large batch by default, but can also be run individually
to help with tracking down things like signature bugs that may take many
iterations to reproduce.
Each test logs its stdout and stderr to its own file, which is cleaned up
when a test succeeds. For failures, those logs can be combined with verbose
libssh output from pkd itself to start debugging things.
Some example usages:
pkd_hello
Run all tests with default number of iterations.
pkd_hello --list
List available individual test names.
pkd_hello -i 1000 -t torture_pkd_openssh_ecdsa_256_ecdh_sha2_nistp256
Run only the torture_pkd_openssh_ecdsa_256_ecdh_sha2_nistp256
testcase 1000 times.
pkd_hello -v -v -v -v -e -o
Run all tests with maximum libssh and pkd logging.
Included in the tests are passes for all existing kex, cipher, and MAC
algorithms.
BUG: https://red.libssh.org/issues/144
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add missing initialization of 'type_c' field of a SSH signature in
'pki_do_sign_sessionid' procedure.
If libssh is compiled with GCrypt, 'dh_handshake_server' fails with
"Could not sign the session id" error. The change fixes that.
Signed-off-by: Artyom V. Poptsov <poptsov.artyom@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a missing 'buffer_pack' formatter in 'ssh_message_auth_interactive_request'.
With this fix the 'examples/samplesshd-kbdint' program is working again for me.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Check the 'ssh_buffer_pack' return in ssh_pki_do_sign for the ED25519 case.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fail fast in 'pki_import_pubkey_buffer' for the ED25519 case if a buffer
sized ED25519_PK_LEN can not be retrieved. Before, the 'memcpy' could
have read beyond the bounds of 'ssh_string_data(pubkey)'.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to free the z_stream structures as allocated from
the gzip.c initcompress, initdecompress functions.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh-keygen makes the tests very slow because new keys are generated
at the start of every test.
ssh-keygen on OSX doesn't support ecdsa keys, even if libcrypto does.
Reviewed-by: Andreas Schneider <asn@samba.org>
That function permits chaining of buffer values to minimize buffer handling
in packet sending code.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Add NULL checks to 'is_first_kex_packet_follows_guess_wrong'
to ensure that a 'strdup(NULL)' path can not be taken.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to honor the 'first_kex_packet_follow' field when processing
KEXINIT messages in the 'ssh_packet_kexinit' callback. Until now
libssh would assume that this field is always unset (zero). But
some clients may set this (dropbear at or beyond version 2013.57),
and it needs to be included when computing the session ID.
Also include logic for handling wrongly-guessed key exchange algorithms.
Save whether a client's guess is wrong in a new field in the session
struct: when set, the next KEX_DHINIT message to be processed will be
ignored per RFC 4253, 7.1.
While here, update both 'ssh_packet_kexinit' and 'make_sessionid' to
use softabs with a 4 space indent level throughout, and also convert
various error-checking to store intermediate values into an explicit
'rc'.
Patch adjusted from original to ensure that client tests remain passing
(ie 'torture_connect'): restrict the changes in 'ssh_packet_kexinit'
only for the 'server_kex' case.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to honor the 'first_kex_packet_follow' field when processing
KEXINIT messages in the 'ssh_packet_kexinit' callback. Until now
libssh would assume that this field is always unset (zero). But
some clients may set this (dropbear at or beyond version 2013.57),
and it needs to be included when computing the session ID.
Also include logic for handling wrongly-guessed key exchange algorithms.
Save whether a client's guess is wrong in a new field in the session
struct: when set, the next KEX_DHINIT message to be processed will be
ignored per RFC 4253, 7.1.
While here, update both 'ssh_packet_kexinit' and 'make_sessionid' to
use softabs with a 4 space indent level throughout, and also convert
various error-checking to store intermediate values into an explicit
'rc'.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Enable retrieving the "ecdsa-sha2-nistpNNN" name of ECDSA keys with a
new 'ssh_pki_key_ecdsa_name' API. This gives more information than the
'ssh_key_type_to_char' API, which yields "ssh-ecdsa" for ECDSA keys.
The motivation is that this info is useful to have in a server context.
The torture_pki unit test is updated to include the new API, and a few
more passes are added to additionally test 384 and 521-bit keys.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Tested by
ssh_server_fork -k <an ecdsa key> -k <an rsa key> ...
and connection succeeded with OpenSSH clients both for ECDSA and RSA
(the latter forced via -o HostKeyAlgorithms=ssh-rsa and some known
hosts clearing was necessary). Also
ssh_server_fork -k <an ecdsa key> -k <another ecdsa key> ...
caused the second key to be used, as expected.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
SSH_BIND_OPTIONS_HOSTKEY will now load host keys of any supported type
rather than set the algorithms that the server permits (which seems
like an unhelpful option anyway; it seems you can always control this
by just loading the right keys).
This option has slightly different semantics than the
SSH_BIND_OPTIONS_<x>KEY options because it requires the key file to
exist immediately rather than on ssh_bind_listen or
ssh_bind_accept_fd. The semantics of this option makes more sense to
me.
We also eliminate ssh_bind_options_set_algo, since it is no longer
used.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In packet_send2, rather than issue two separate buffer_prepend_data calls
(each of which may entail realloc + memmove + memcpy), elide the prepend
work into a single buffer_prepend_data: the header information is computed
locally, and a single 5 byte prepend operation is now done instead of
prepending 1, then 4 bytes.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh_channel_read is a wrapper for ssh_channel_read_timeout with timeout
-1 (infinite) so we call that directly.
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Defining a non inlined class function in a header will cause multiple
definitions when header is included in more that one file since for each
file function will get defined.
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If the sockets are created manually and passed to libssh the internal session
state is set to SSH_SESSION_STATE_SOCKET_CONNECTED. Result of this fix can be
verified by running torture_connect test (torture_connect_socket) with -vvvv
flags.
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
On Mar 16, 09:41, Aris Adamantiadis wrote:
> Hi Petar,
> I agree with the principle, but I don't think this code can work...
> RSA_generate_key takes an RSA* as parameter and in our code we probably
> have key->rsa==NULL. (if we don't then the old code had a memory leak).
>
> Does the test case work ?
>
> Aris
>
Yes, you are right. This works, tested with tests/unittests/torture_pki
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
The libssh library by default does not allow in-source build (with cmake
MacroEnsureOutOfSourceBuild macro). The INSTALL file (implicitly) suggests
creating a build directory. So lets add build to list of git ignore files to
avoid complaints from git.
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
It seems useful to be able to run ssh_server_fork without being
required to load some key of RSA and DSA keytypes. However, with the
current ssh_server_fork, you need to have some keys as some default
value is set by default and you can't unset the value for a keytype
(e.g. by using NULL as an argument). So the "no default keys"
argument turns off the default key assignments.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The commit fixes this build warning:
====
src/server.c:223:8: warning: ‘privkey’ may be used uninitialized in this function [-Wmaybe-uninitialized]
rc = ssh_pki_export_privkey_to_pubkey(*privkey, &pubkey);
^
src/server.c:243:11: note: ‘privkey’ was declared here
ssh_key privkey;
====
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In 'ssh_bind_listen', move setting of 'sshbind->bindfd' to only happen after
the listen call: otherwise 'bindfd' can be set to a bogus descriptor for the
case that listen fails.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When accepting a new connection, a forking server based on libssh forks
and the child process handles the request. The RAND_bytes() function of
openssl doesn't reset its state after the fork, but simply adds the
current process id (getpid) to the PRNG state, which is not guaranteed
to be unique.
This can cause several children to end up with same PRNG state which is
a security issue.
After discussion with Aris and it was not obvious enough to understand
the issue we decided to refactor it.
Reviewd-by: Aris Adamantiadis <aris@0xbadc0de.be>
Right now the behavior of packet_{en,de}crypt on len == 0 depends on
the behavior of malloc. Instead, make these consistently fail based
on what I assume the desired behavior is due to the first error
message in each.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
If we receive a packet of length exactly blocksize, then
packet_decrypt gets called on a buffer of size 0. The check at the
beginning of packet_decrypt indicates that the function should be
called on buffers of at least one blocksize, though the check allows
through zero length. As is packet_decrypt can return -1 when len is 0
because malloc can return NULL in this case: according to the ISO C
standard, malloc is free to return NULL or a pointer that can be freed
when size == 0, and uclibc by default will return NULL here (in
"non-glibc-compatible" mode). The net result is that when using
uclibc connections with libssh can anomalously fail.
Alternatively, packet_decrypt (and probably packet_encrypt for
consistency) could be made to always succeed on len == 0 without
depending on the behavior of malloc.
Thanks to Josh Berlin for bringing conneciton failures with uclibc to
my attention.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Follow-up to 4e04ec8, which caused a regression on OS X.
Checking the value of CMAKE_THREAD_LIBS_INIT to decide whether any threading
library is present on a system turns out to be wrong -- in OS X, for
example, usage of pthreads does not depend on any additional linker or
compiler flags, so CMAKE_THREAD_LIBS_INIT is empty and our check in
src/CMakeLists.txt failed (it used to work before 4e04ec8 because
CMAKE_HAVE_THREADS_LIBRARY is set).
Instead, just look for Threads_FOUND, which FindThreads sets just like any
other Find module when it has found what it was looking for.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix bug #142
The mode does need to be an octal numeric string. Mode 0600 now gets sent on the wire as 0384, triggering a "scp: protocol error: bad mode" response, and an "scp status code 1d not valid" message from libssh.
As mentioned in the previous commit, there are cases where
CMAKE_HAVE_THREADS_LIBRARY is not set and pthreads _is_ being used: one can
pass -DTHREADS_HAVE_PTHREAD_ARG=1 to CMake directly so that it just passes
-pthread to the compiler/linker and does not set CMAKE_HAVE_THREADS_LIBRARY.
Since we are only interested in knowing whether any threading library has
been found, we should use CMAKE_THREAD_LIBS_INIT instead (Threads_FOUND
would also work).
Note that, at the moment, there is only a pthreads backend available in
threads/, so if it is not found configuration will fail because CMake will
try to create a library from an empty set of source files.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
libssh is primarily interested in whether pthreads is present and can be
used. Checking for CMAKE_HAVE_THREADS_LIBRARY is not the same thing, as
there are cases where pthread exists but CMAKE_HAVE_THREADS_LIBRARY is not
set (for example, FreeBSD passes -DTHREADS_HAVE_PTHREAD_ARG=1 to CMake by
default as a way to skip the checks for -lpthread, -lpthreads and others and
tell the build system that -pthread is the one expected to be used).
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to check whether the socket at hand is indeed still connected
throughout POLLIN processing in ssh_socket_pollcallback.
Before this change, the POLLIN block in ssh_socket_pollcallback is
predicated against the condition (s->state == SSH_SOCKET_CONNECTED).
Once entered, data from the socket is consumed through the data
callback in this loop:
do {
r = s->callbacks->data(buffer_get_rest(s->in_buffer),
buffer_get_rest_len(s->in_buffer),
s->callbacks->userdata);
buffer_pass_bytes(s->in_buffer,r);
} while (r > 0);
However, it is possible for the socket data callback to change the
state of the socket (closing it, for example). Fix the loop to only
continue so long as the socket remains connected: this also entails
setting the ssh_socket state to SSH_SOCKET_CLOSED upon close.
The bug can be observed before the change by sending a bogus banner
to the server: 'echo -e "A\r\nB\r\n" | nc localhost 22'. Each of
'A' and 'B' will be processed by 'callback_receive_banner', even
though the client socket is closed after rejection of 'A'.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
So that it would match ssh_channel_pty_request_callback as well as the documentation
Signed-off-by: Audrius Butkevicius <audrius.butkevicius@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix the DSA portion of 'pki_signature_to_blob': before this change, it
is possible to sometimes observe DSA signature validation failure when
testing with OpenSSH clients. The problem ended up being the following
snippet which did not account for the case when 'ssh_string_len(x)' may
be less than 20:
r = make_bignum_string(sig->dsa_sig->r);
...
memcpy(buffer,
((char *) ssh_string_data(r)) + ssh_string_len(r) - 20,
20);
Above consider the case that ssh_string_len(r) is 19; in that case the
memcpy unintentionally starts in the wrong place. The same situation
can happen for value 's' in this code.
To fix, adjust the offsets used for the input and output pointers, taking
into account that the lengths of 'r' and 's' can be less than 20. With
the fix I am no longer able to reproduce the original failure mode.
BUG: https://red.libssh.org/issues/144
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ssh_get_error can actually work on anything with an ssh_common_struct
as its first member. It is already used in examples in the
distribution with ssh_sessions and ssh_binds.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Pad RSA signature blobs to the expected RSA signature length
when processing via 'pki_signature_to_blob'.
Some clients, notably PuTTY, may send unpadded RSA signatures
during the public key exchange: before this change, one can
sometimes observe failure in signature validation when using
PuTTY's 'plink' client, along these lines:
ssh_packet_process: ssh_packet_process: Dispatching handler for packet type 50
ssh_packet_userauth_request: ssh_packet_userauth_request: Auth request for service ssh-connection, method publickey for user 'foo'
ssh_pki_signature_verify_blob: ssh_pki_signature_verify_blob: Going to verify a ssh-rsa type signature
pki_signature_verify: pki_signature_verify: RSA error: error:04091077:rsa routines:INT_RSA_VERIFY:wrong signature length
ssh_packet_userauth_request: ssh_packet_userauth_request: Received an invalid signature from peer
For cross-reference this issue once also existed between
PuTTY and OpenSSH:
http://www.chiark.greenend.org.uk/~sgtatham/putty/wishlist/rsa-verify-failed.htmlhttp://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/ssh-rsa.c?rev=1.19;content-type=text%2Fx-cvsweb-markup
With the fix I am unable to reproduce the above failure mode when
testing with 'plink'.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Make sure to explicitly set key pointers to NULL following the use
of 'ssh_key_free' throughout bind.c.
Before this change, a double free can happen via 'ssh_bind_free'
as in this example callpath:
// create an ssh_bind
ssh_bind b = ssh_bind_new();
// provide a path to a wrong key-type
ssh_bind_options_set(b, SSH_BIND_OPTIONS_DSAKEY, path_to_rsa_key);
// initialize set key-type
ssh_bind_listen(b);
-> error path "The DSA host key has the wrong type: %d",
ssh_key_free(sshbind->dsa)
-> ssh_key_clean(key) // OK
-> SAFE_FREE(key) // OK, but, sshbind->dsa is *not* set to NULL
// ssh_bind_listen failed, so clean up ssh_bind
ssh_bind_free(b);
-> ssh_key_free(sshbind->dsa) // double-free here
To fix, set pointers to NULL that have been free'd with 'ssh_key_free'.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This works same way as ssh_forward_accept() but can return a destination
port of the channel (useful if SSH connection forwarding several TCP/IP
ports).
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Not 100% satisfied of this patch, but the way libgcrypt handles
threading in 1.6 is not compatible with custom handlers. The
new code basicaly uses pthreads in every case. This will probably
not work on windows.
The ssh_userauth_none() call should already be non-blocking. However
this this function is broken in non-blocking mode. It should reveal the
existing bug.
Fix the setting of 'channel->flags' to use '|='. Before this
change, one bug symptom can be that channels are never fully
free'd via ssh_channel_free, resulting in memory leaks.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to use 'ssh_channel_do_free' in 'ssh_disconnect', when removing and
free'ing up a session's channels. This matches the behavior in 'ssh_free',
and is necessary to fully free any channel which may not have been closed
completely (see usage of flags SSH_CHANNEL_FLAG_CLOSED_REMOTE,
SSH_CHANNEL_FLAG_FREED_LOCAL).
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In a previous refactoring patch, the code underpinning the
ssh_gssapi_set_creds() API was inadvertently removed. This patch
fixes the problem.
Also clarify what variable holds which credentials and insure that
credentials created within the library are propelry freed.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
- Properly acquire and inquitre credentials to get the list of available
credentials.
- Avoid enforcing a specific username it breaks some use cases (k5login).
- Remove confusing references to delegated credentials as there is no code
that actually uses delegated credentials in the initialization case.
Signed-off-by: Siom Sorce <simo@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
For integration with an external mainloop, we need to know how to
replicate libssh's internal poll() calls. We originally through
ssh_get_status() was that API, but it's not really - those flags only
get updated from the *result* of a poll(), where what we really need
is to know how libssh would *start* a poll().
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Otherwise applications providing their own fd end up tripping an
assertion, since the session is just in _CONNECTING.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
When the public key auth handler is executed and returns SSH_OK,
ssh_execute_server_callbacks() still runs some client callbacks,
which may set rc to SSH_AGAIN, which triggers a default reply on
auth, denying auth.
Signed-off-by: Nicolas Viennot <nicolas@viennot.biz>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The code is careful to reenable compression when rekeying.
Signed-off-by: Nicolas Viennot <nicolas@viennot.biz>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Per RFC 4252, it is required to send back only one of either
SSH_MSG_USERAUTH_PK_OK or SSH_MSG_USERAUTH_FAILURE for public
key probes.
Update the handling of 'auth_pubkey_function' to send back PK_OK
instead of SSH_MSG_USERAUTH_SUCCESS for the case that the state
of the message at hand is SSH_PUBLICKEY_STATE_NONE.
With this change, it is now possible to process an initial key probe
and then subsequent signature validation using the server callbacks.
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Fix a memory leak in 'ssh_poll_ctx_free': issue 'ssh_poll_free'
to remove the poll handle from its context and free it.
BUG: https://red.libssh.org/issues/128
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
A few callback descriptions refer to a non-existent value SSH_AUTH_OK,
which should be SSH_AUTH_SUCCESS. This commit fixes these.
Signed-off-by: Alan Dunn <amdunn@gmail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
# If the source code was changed, but there were no interface changes:
# Increment REVISION.
set(LIBRARY_VERSION"4.5.1")
set(LIBRARY_VERSION"4.9.4")
set(LIBRARY_SOVERSION"4")
# where to look first for cmake modules, before ${CMAKE_ROOT}/Modules/ is checked
set(CMAKE_MODULE_PATH
${CMAKE_SOURCE_DIR}/cmake/Modules
)
# add definitions
include(DefineCMakeDefaults)
include(DefinePlatformDefaults)
include(DefineCompilerFlags)
include(DefineInstallationPaths)
include(DefineOptions.cmake)
include(CPackConfig.cmake)
include(GNUInstallDirs)
include(CompilerChecks.cmake)
# disallow in-source build
include(MacroEnsureOutOfSourceBuild)
macro_ensure_out_of_source_build("${PROJECT_NAME} requires an out of source build. Please create a separate build directory and run 'cmake /path/to/${PROJECT_NAME} [options]' there.")
@@ -455,6 +455,15 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Linking with OpenSSL
17. In addition, as a special exception, we give permission to link the code of its release of libssh with the OpenSSL project's "OpenSSL" library (or with modified versions of it that use the same license as the "OpenSSL" library), and distribute the linked executables. You must obey the GNU Lesser General Public License in all respects for all of the code used other than "OpenSSL". If you modify this file, you may extend this exception to your version of the file, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version.
Linking with OpenSSL
17. In addition, as a special exception, we give permission to link the code
of its release of libssh with the OpenSSL project's "OpenSSL" library (or with
modified versions of it that use the same license as the "OpenSSL" library),
and distribute the linked executables. You must obey the GNU Lesser General
Public License in all respects for all of the code used other than "OpenSSL".
If you modify this file, you may extend this exception to your version of the
file, but you are not obligated to do so. If you do not wish to do so, delete
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
d="m 0.52916667,292.2374 -0.26458334,0.52925 v 3.43958 H 4.7625001 v -3.43958 H 2.38125 L 2.1166667,292.2374 Z"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
