PD#SWPL-3294
Problem:
unify lcd pinmux usage in dts
Solution:
change lcd pinmux usage to be recommend by linux upstream
Verify:
verify by t962x_r311
Change-Id: I7069b5272fa779575a8111b12a3ed835ab72cd02
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-4088
Problem:
There will be kernel panic when read edid via hdmirx
driver interface
Solution:
modify the rd_top interface
Verify:
TL1 android P
Change-Id: Ifb595cc66a2e792bc5153d726258deb7ba4e741c
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-4272
Problem:
g12b_a311d_w400_buildroot.dts do not include add ir cut control GPIO
Solution:
add ir cut control GPIO to g12b_a311d_w400_buildroot.dts
Verify:
g12b_a311d_w400_buildroot
Change-Id: I771ea08ad6ab189060079b820a471e059b5eb72a
Signed-off-by: yu.zhang <yu.zhang@amlogic.com>
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-915
Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.
Solution:
close afbc2
Verify:
r321
Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4255
Problem:
UI disable SDR TO HDR, reboot BOX,
TV flicker white and then display ok when connect hdr tv
Solution:
dr2hdr function set by uplayer, kernel default disable
Verify:
verify on G12A
Change-Id: Iea5a1e0be9b5665bb7deb785b6b5faa702ef1664
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3951
Problem:
buffer malloc for dtb may failed
Solution:
malloc may sleep to wait for enough memory
Verify:
pass on p212
Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-3226
Problem:
turn off the dv core, the osd flutters
Solution:
keeping core2 open when dv enable under sdr TV
Verify:
u212
Change-Id: Idf57c6e67676fb5eec944e543cb596247c932df4
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4048
Problem:
omx can not detect first frame have toggled
Solution:
omx get first frame toggoled flag
Verify:
verify by p212
Change-Id: I632824390287dd0257dca23a009ff8851054f68d
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-4194
Problem:
Systemcontorl set display mode when attr is difference
Solution:
Fix color space property parser
Verify:
G12A/U200
Change-Id: Iddbcbbf3925b175833f534a287de413315ca1170
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-4075
Problem:
add enhanced hsc adv num support
Solution:
add enhanced hsc adv num support
Verify:
verified on g12b-w400
Change-Id: I13b52a0b10e8f3830c57ff691ef3472a34cbe89c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4075
Problem:
dst data is not normal by using strechblit function
such as 1920x1080 --> 640x360
Solution:
add bit width restriction for
horizontal scaler initial phase
Verify:
verified on g12b-w400
Change-Id: Ibcd85cc08f49254e90100beb952e711736531134
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-3876
Problem:
add support for nv16
Solution:
add support for nv16
Verify:
verified on g12a-u200
Change-Id: I34c9179ed4fde43b9bd00caa9505ea4c8ee78eb0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4073
Problem:
warning of CPU Tainted
Solution:
add spin lock when R/D reg
Verify:
verify by marconi
Change-Id: I8f47666f41c0ba3a010631f5d71416aad0e43beb
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#SWPL-3384
Problem:
DI post holdline setting is not map with video
Solution:
change holdline to 8
Verify:
verified by gxl
Change-Id: Ia352604086cefb4c69d5dd268d12741c4cf4f173
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-3715
Problem:
set startup to TV,when DVD power on,the platform
autoshutdown after enter HDMI source
Solution:
suspend condition is wrong when not in suspend mode.
Verify:
TL1 (X301_T962x2)
Change-Id: I057cfe6b9a7f5806fa54eac063c02a7e3dc0179e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-3103
Problem:
dolby files have no sounds after replay
Solution:
in x301, the clk_81 is null when init, it is releated
to demux pcr, so add clk_81 to enable demux pcr
Verify:
verify by X301
Change-Id: Id11549fe7a8b156206ac7004e31575fd5d309254
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-2634
Problem:
eyetest mode is a little unstable
Solution:
adjust the tuning mode of the fixed adj
Verify:
R311
Change-Id: I6112e0078bf013d2a4cfe4ff04210f1d15e3439d
Signed-off-by: long yu <long.yu@amlogic.com>
PD#GH-17
Problem:
sometimes cma allocation failed but it's hard to get
failed log and need recompile code.
Solution:
Add /proc/cma_debug to open cma debug message dynamic.
By default, no debug message is printed. If you write a
value large than 0 to this node, debug message will be
printed.
Verify:
p212
Change-Id: Ibcfd1d48be5f33f674f09df713dc2e493748c405
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#GH-17
Problem:
If a task be killed during CMA allocation, then it will abort
cma allocation in function compact_unlock_should_abort. But in
function aml_cma_alloc_range, it will return -EBUSY. Which cause
cma allocation loop won't exit and run again and again.
Solution:
return -EINT for this case to exit cma allocaion loop.
Verify:
newman platform
Change-Id: I6559bb184fc035ae68c8ccd001407767e1e22f0c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-2112
Problem:
eMMC timing test failed on item tISU
Solution:
set core_phase to 2 for HS200 busmode
Verify:
TL1-T962X2_X301
Change-Id: I1025b6b6b66b2591b7a8faca68ff1852eeb9b85c
Signed-off-by: long yu <long.yu@amlogic.com>
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-4016
Problem:
afbc decode error when write afbc start before afbc reset reg
Solution:
replace invalid reg when found afbc start before afbc reset reg
Verify:
test pass on franklin
Change-Id: Ia01608fe4d5c6132d0b54e63c48560e9e77bfe0a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#IPTV-1032
Problem:
Need support 1440x2560p60hz
Solution:
Porting VESA code and 1440x2560p60hz
Verify:
g12b/w400
Change-Id: I3cf38bebc29b76aed50fe2ced7b47e27f2d1af06
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-4091
Problem:
due to the ip bug, the first frame has dirty data
Solution:
mute the first frame
Verify:
u212
Change-Id: Ia21e96c338b22e25d1073f27083f10634a09edad
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-3828
Problem:
hdcp22 access ddr when power shutdown
Solution:
need notify hdcp22 close when power shutdown
Verify:
Local
Change-Id: Iffead6b2dfdd97e6e7ad16e856cb09b42e3783d1
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-4090
Problem:
No audio after suspend and resume.
Suspend won't save the mute value,
and after resume, it could not be restored.
Solution:
Add a mute val to save when suspend,
and after resume, restore the mute value.
Verify:
Verified by QA.
Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#OTT-1590
Problem:
bt mac write
Solution:
Accept the MAC address from uboot and create nodes
Verify:
Verifying on Public Edition P212
Change-Id: I77ff3543aff937adc07bf3a0933a350c27e9dd20
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
PD#SWPL-4087
Problem:
System Memory needs to be optimized.
Solution:
Removed reserve memory for galcore.
Verify:
local
Change-Id: I4fc1d7690b6beda1055aebe26570a05f28474813
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
PD#SWPL-3555
Problem:
{DVB-C}Hisense needs less than 3 minutes for dvb-c search.(5/5，None)
Solution:
1.use demod internal state machine to optimize time
2.remove j.83b filter setting in dvbc mode for tl1 & txlx
Verify:
verified by t962x2_x301&t962x_r311
Change-Id: Ic922e3da727179e2e35a0fc80e52ac7242c54129
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#TV-1586
Problem:
no atv format get func
Solution:
Add atv format get func
Verify:
verified by x301
Change-Id: Ia43d5a67370d2b025e1b32833a5408a5e7d251d4
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-209
Problem:
record apk exit when recording
Solution:
set right start vdin flag
Verify:
test pass on P321
Change-Id: I0130b5a898392d75d500987f8087dbe9ab778372
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#SWPL-3809
Problem:
cm parameters curve is wrong after disable/enable
Solution:
TV cm parameters from pq db, don't need set by kernel
Verify:
verify on TL1
Change-Id: I9c87c414e009d04c6a4fdf8caf8e9bb429376d56
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3779
Problem:
local contrast default parameters is too high
Solution:
local contrast default low effect parameters
Verify:
verify on TL1
Change-Id: Ib7ec9c03284a68057f8cf245a2be8ad2e81c0af3
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
