Fixes: 841fa2175d ("arm64: dts: rockchip: rk3568 separate the node of csi2 and hw")
Change-Id: I16a05ac90044e9aad1338827ac33146bb4f2bc71
Signed-off-by: Jianwei Fan <jianwei.fan@rock-chips.com>
Since there is no txdone irq in the Rockchip mailbox IP, invoking
mbox_chan_txdone()/mbox_client_txdone() after mbox_send_message()
to tick the TX would be free the active request which have not been
sent out if the controller returned the EBUSY state before. So amend
the txdone method to polling to fix it.
The TX polling interval can specify in mailbox DT with
set "rockchip,txpoll-period-ms" property to 1 milliseconds.
Fixes: b5795e81ec ("rpmsg: rockchip: add Rockchip RPMsg Platform Support")
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
Change-Id: I9d15ed4a61cda049c7804e2688e79f157de1c5a2
This series in order to have the default MMC alias.
The mmc default alias:
mmc0 = &sdhci;
mmc1 = &sdmmc0;
mmc2 = &sdmmc1;
The Linux OS have the post-build.sh to handle the rootfs,
and export RK_EXTRA_PARTITIONS for setting the PARTITIONS.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I28ae38a7aaf35c6f584879c19a339ff6079d059d
boot-on is absent or boot-on = <1>: bring up this cpu when driver probe.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I0157e72b53f5c35e5478408804a72bab5fd02837
Program/Erase/Read Speed
– Page Program time : 450us typical
– BLOCK ERASE time : 4ms typical
– PAGE READ time : 120us maximum (without ECC)
Change-Id: I0c5bc9827788938df028e525e331c0db8d041676
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
When hdmi is disabled, relevant clocks have been turned off.
Accessing hdmi registers may cause crash.
Change-Id: Id5370641aac15d317d2e820aeac053a1bcf016a5
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
In order to improve stability for some chips.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: Ia09d9e6d455e7dd932c84f4d7815c95dda83a6d6
Some high speed devices performance drop drastically on
Rockchip platforms when connected with DWC3-xHCI controller.
It's because that the DWC3 controller enable high speed
park mode by default, it aims to improve performance with
pipelining of multiple packet. However, for some devices
(such as UVC with bulk transfer VID:04b4, PID:02f9),
when an IN request is sent within 900ns of the ACK of the
previous packet, these devices NAKs more than 3 times, it
could decrease the performance.
These slow devices include:
1. idVendor=04b4, idProduct=02f9, Product: IRay UVC
2. idVendor=1921, idProduct=21863, Product: Sandisk
3. idVendor=3744, idProduct=8552, Manufacturer: Flex Drive
In order to improve compatibility with high speed devices,
this patch disable HS park mode for USB DWC3 controller on
all arm64 SoCs.
With this patch, we test RK3588 with one slow device
(IRay UVC VID:04b4, PID:02f9) and three fast devices
(U2 disk VID:058f, PID:6387; U2 disk VID:0781, PID:557c;
U3 disk VID:174c, PID:55aa), all of these device have
no performance loss.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I0ac37e7af429392f65f339cf1448cf2958e03b57
Some high speed devices performance drop drastically on
Rockchip platforms when connected with DWC3-xHCI controller.
It's because that the DWC3 controller enable high speed
park mode by default, it aims to improve performance with
pipelining of multiple packet. However, for some devices
(such as UVC with bulk transfer VID:04b4, PID:02f9),
when an IN request is sent within 900ns of the ACK of the
previous packet, these devices NAKs more than 3 times, it
could decrease the performance.
These slow devices include:
1. idVendor=04b4, idProduct=02f9, Product: IRay UVC
2. idVendor=1921, idProduct=21863, Product: Sandisk
3. idVendor=3744, idProduct=8552, Manufacturer: Flex Drive
In order to improve compatibility with high speed devices,
this patch disable HS park mode for USB DWC3 controller on
all arm64 SoCs.
With this patch, we test RK3588 with one slow device
(IRay UVC VID:04b4, PID:02f9) and three fast devices
(U2 disk VID:058f, PID:6387; U2 disk VID:0781, PID:557c;
U3 disk VID:174c, PID:55aa), all of these device have
no performance loss.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I9037143fa2553317ad7ae55abeafad3b106cafcb
Setting the PARKMODE_DISABLE_HS bit in the DWC3_USB3_GUCTL1.
When this bit is set to '1' all HS bus instances in park mode are disabled
For some USB wifi devices, if enable this feature it will reduce the
performance. Therefore, add an option for disabling HS park mode by
device-tree.
In Synopsys's dwc3 data book:
In a few high speed devices when an IN request is sent within 900ns of the
ACK of the previous packet, these devices send a NAK. When connected to
these devices, if required, the software can disable the park mode if you
see performance drop in your system. When park mode is disabled,
pipelining of multiple packet is disabled and instead one packet at a time
is requested by the scheduler. This allows up to 12 NAKs in a micro-frame
and improves performance of these slow devices.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230419020044.15475-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry-pick from commit d21a797a3e)
Change-Id: I43ee416e54779a073a0ba4057edf4be8bd7886de
multi sensor share same tb info buf, and this buf will
overwrittern when first sensor stream on but second fast_work
schedule slowly. So to save tb info for all dev at first read.
Change-Id: I335b9e3bd317202a348be17965be112a1259bb3e
Signed-off-by: Cai YiWei <cyw@rock-chips.com>
MUST: after pm_runtime_enable step, any register R/W
should be wrapped with pm_runtime_get_sync/put.
Another approach is to enable the regcache true to
avoid access HW registers.
Alternatively, performing the registers R/W before
pm_runtime_enable is also a good option.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ib3d5daecad8491f05a3612a2cb02742ec31e4899
MUST: after pm_runtime_enable step, any register R/W
should be wrapped with pm_runtime_get_sync/put.
Another approach is to enable the regcache true to
avoid access HW registers.
Alternatively, performing the registers R/W before
pm_runtime_enable is also a good option.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I9c495361fcb7fb0a06fe1538d05b94617e332756
HWP_EN must be enabled first before block unlock region is set.
Change-Id: I6b107d97de48bb2644da865f353d2adace95224e
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
while two camera link to a device tree, if the link relationship is switched from one sensor to another,
there may be error messages in crop information
Signed-off-by: Zefa Chen <zefa.chen@rock-chips.com>
Change-Id: I6b6aa3efcf8f862b5b1b6e41fb2b4c2fcead2282
Add 3rd flash id for GD5F1GQ5RExxG to make distinguish with
F50L2G41KA.
Change-Id: I54b65bf631ee5584119bc667f1f6b954789f0f8b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
rk3588 frac pll:
FFVCO = ((m + k / 65536) * FFIN) / p
FFOUT = ((m + k / 65536) * FFIN) / (p * 2s)
k is the original code, but the K[15:0] is complement code
(6'b1000_0000_0000_0000 <= K[15:0] <= 16'b0111_1111_1111_1111),
need to be converted.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Change-Id: I107d31d910d260c83891d5b6e927f119761d6fba
1.Set slow slew rate control for PI
2.Set CDR phase path with 2x gain
Signed-off-by: Jianwei Zheng <jianwei.zheng@rock-chips.com>
Change-Id: I2d0811b0be7b1d4764ecd738d069b06e4da5eaa2
MUST: after pm_runtime_enable step, any register R/W
should be wrapped with pm_runtime_get_sync/put.
Another approach is to enable the regcache true to
avoid access HW registers.
Alternatively, performing the registers R/W before
pm_runtime_enable is also a good option.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I69dd66230cba636d2ccb31ec01a21be1a482a0e3
MUST: after pm_runtime_enable step, any register R/W
should be wrapped with pm_runtime_get_sync/put.
Another approach is to enable the regcache true to
avoid access HW registers.
Alternatively, performing the registers R/W before
pm_runtime_enable is also a good option.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ife9b1a0e6f75e714bfb6e7c0d472e4603fa8cd8f
